{"title":"Extruded Sponge","description":null,"products":[{"product_id":"extruded-sponge-strip-12-5mm-x-25mm-black-epdm-rubber-per-metre","title":"Extruded Sponge Strip 12.5 x 25mm – Closed-Cell Profile EXSS12.5X25 – Black EPDM Sponge – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA solid rectangular strip of black closed-cell EPDM sponge, 12.5 mm by 25 mm, with a smooth skin on all four faces.\u003c\/strong\u003e It packs gaps, cushions panels and quietens rattles, and because the cells are closed it does not soak up water like open foam. Sold by the metre and cut as one length.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eSolid rectangular strip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSection\u003c\/th\u003e\n\u003ctd\u003e12.5 mm × 25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM sponge rubber, closed cell (non-intercellular)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSkinned on all four sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBacking\u003c\/th\u003e\n\u003ctd\u003eNone: not self-adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eEXSS12.5X25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.17 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLongest single piece\u003c\/th\u003e\n\u003ctd\u003e50 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eIP-CS-15435171103099\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eEPDM copes with weather, sunlight and ozone without crumbling, and in sponge form it compresses easily to fill uneven gaps. Closed cells mean each bubble is sealed, so the strip seals rather than wicks.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 length of black EPDM sponge strip, 12.5 × 25 mm, in the number of metres ordered\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eLimited stock: the supplier is phasing this size out of its regular range.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the gap.\u003c\/strong\u003e Measure across and in depth with the panel closed, and allow for the sponge squashing slightly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the face.\u003c\/strong\u003e Decide whether the 25 mm or the 12.5 mm face sits on the fixing surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and bond.\u003c\/strong\u003e Clean both surfaces and fix the strip with a rubber-compatible contact adhesive, or hold it in a channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLay it relaxed.\u003c\/strong\u003e Don't stretch it; it will shrink back and leave gaps at the ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut cleanly.\u003c\/strong\u003e Use a long, sharp blade in one stroke and butt or glue any joins.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order 5 and you receive one continuous 5 m length, up to 50 m in one piece.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eNo. It is skinned on all sides with no tape, so bond it with contact adhesive or fit it in a channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it absorb water?\u003c\/strong\u003e\u003cbr\u003eIt is closed-cell sponge, so the cells are not connected and it does not soak up water like open-cell foam.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it square in section?\u003c\/strong\u003e\u003cbr\u003eNo. It is a rectangle twice as wide as it is thick: 25 mm by 12.5 mm.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Need a different size? Contact us and we will check what is available.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416109724027,"sku":"IP-CS-15435171103099","price":10.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/ip-10004572_section.png?v=1794507352"},{"product_id":"extruded-sponge-strip-6mm-x-19mm-black-epdm-rubber-per-metre","title":"Extruded Sponge Strip 6mm x 19mm – Black Closed-Cell EPDM Sponge – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA rectangular strip of black closed-cell EPDM sponge, 6 mm thick and 19 mm wide, extruded and skimmed smooth on all four faces.\u003c\/strong\u003e Closed cells mean the strip does not soak up water like open foam, so it suits general sealing, packing and cushioning jobs.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSection\u003c\/th\u003e\n\u003ctd\u003e6 mm × 19 mm, rectangular\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCell structure\u003c\/th\u003e\n\u003ctd\u003eClosed cell (non-intercellular)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSkimmed on all four sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.07 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, cut as one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eEXSS6X19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004576\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy closed-cell EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eEPDM copes well with sunlight, ozone and weather, and the closed-cell structure keeps water out of the core. The sponge compresses under light pressure to close a gap, then recovers when the load is removed.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eBlack EPDM sponge strip, 6 × 19 mm, cut to the number of metres you order\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the run.\u003c\/strong\u003e Measure the length you need and add a little for trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the surface.\u003c\/strong\u003e Remove old rubber and adhesive, degrease and let it dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-fit first.\u003c\/strong\u003e Lay the strip in place to check the fit along the whole run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFix it.\u003c\/strong\u003e Use a suitable rubber adhesive if the strip needs to stay put.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim neatly.\u003c\/strong\u003e Cut with a sharp blade and butt the ends together without stretching the strip.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order 5 and you receive one continuous 5 m length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eNo. It has no adhesive backing; fix it with a suitable adhesive if needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it solid rubber?\u003c\/strong\u003e\u003cbr\u003eNo. It is closed-cell sponge, softer and more compressible than solid rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich way round does it go?\u003c\/strong\u003e\u003cbr\u003eThe section is a plain rectangle, so lay it on whichever face suits the gap: 19 mm wide and 6 mm high, or on its edge.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure of the size? Send us a photo and measurements of the old strip and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416110117243,"sku":"10004576","price":12.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/b16p2-10004576_section.png?v=1794507010"},{"product_id":"boot-lid-seal-fits-triumph-dolomite-sprint-per-metre","title":"Boot Lid Seal – Fits Triumph Dolomite Range incl. Sprint (OEM 720438) – EPDM Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA replacement boot lid seal for the Triumph Dolomite range, including the Sprint, made in black EPDM sponge rubber to OEM part 720438.\u003c\/strong\u003e It is sold by the metre, so you order the length your boot opening needs and receive it as one piece.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph Dolomite range, including the Dolomite Sprint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eBoot lid opening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM part number\u003c\/th\u003e\n\u003ctd\u003e720438\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaker code\u003c\/th\u003e\n\u003ctd\u003eSRS160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eCupped sponge section with an open centre channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.08 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, cut as one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10006662\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eEPDM stands up well to sunlight, ozone and wet weather, so it stays soft far longer than the old rubber it replaces. The sponge form is soft and squashes down easily as the lid closes on it.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eBoot lid seal cut to the number of metres you order, in one continuous length\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure first.\u003c\/strong\u003e Run a tape round the boot opening where the old seal sat and add a little for trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip and clean.\u003c\/strong\u003e Remove the old seal and clean the face it sat on of dirt, rust and any old glue.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatch the old position.\u003c\/strong\u003e Lay the new seal where the old one was, working round from one point without stretching the sponge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoin neatly.\u003c\/strong\u003e Cut the end square and butt it tight to the start.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the fit.\u003c\/strong\u003e Close the lid gently and check for gaps before driving in the rain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price for the whole seal?\u003c\/strong\u003e\u003cbr\u003eNo. The price is per metre. Order 3 to receive one continuous 3 m length, and so on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I need?\u003c\/strong\u003e\u003cbr\u003eMeasure round your boot opening, or measure the old seal, and round up to the next whole metre.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit models other than the Sprint?\u003c\/strong\u003e\u003cbr\u003ePart 720438 is listed by other Triumph parts suppliers for the Dolomite range as well as the Sprint. If your car has been modified, send us a photo of the old seal first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the profile look like?\u003c\/strong\u003e\u003cbr\u003eIt is a black sponge section with a cupped, open centre channel. See the end-view drawing in the photos.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre profile dimensions available?\u003c\/strong\u003e\u003cbr\u003eNo sizes are published for this seal, so our drawing is illustrative. Compare it with your old seal before ordering.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure it is the right seal? Send us a photo of your old one and we will check.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416113033595,"sku":"10006662","price":16.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/triumph-dolomite-boot-lid-seal-fitting-eefea84c-a4d8-490f-821e-85f9c69e2cb5.jpg?v=1794566335"},{"product_id":"extruded-sponge-strip-6mm-x-12-5mm-black-epdm-rubber-per-metre","title":"Extruded Sponge Strip 6mm x 12.5mm – Universal Fit – Closed-Cell EPDM Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA compact black sponge strip, 6 mm by 12.5 mm, extruded from closed-cell EPDM and skinned on all four faces.\u003c\/strong\u003e Buy it by the metre and cut it to the run you need.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSection\u003c\/th\u003e\n\u003ctd\u003e6 x 12.5 mm solid rectangle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFit\u003c\/th\u003e\n\u003ctd\u003eUniversal (no specific vehicle listed by the maker)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCell type\u003c\/th\u003e\n\u003ctd\u003eClosed cell (non-intercellular)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSkinned on all 4 sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eapprox. 0.05 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eEXSS6X12.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre; several metres come as one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004575\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy closed-cell EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eThe cells are sealed off from one another rather than open and linked, and every face has a smooth skin, so the strip squashes evenly and looks neat along its length. EPDM stands up well to sunlight, ozone and weather.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eYour ordered length of 6 x 12.5 mm sponge strip, in one piece (order 3 for a 3 m length)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure first.\u003c\/strong\u003e Measure the run and add a little for trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the gap.\u003c\/strong\u003e Make sure the space suits a 6 x 12.5 mm section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the surface.\u003c\/strong\u003e Remove old rubber, adhesive and grease and let it dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLay it, don't stretch it.\u003c\/strong\u003e Work from one end and let the strip sit naturally.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim square.\u003c\/strong\u003e Cut with a sharp blade and butt the ends neatly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the metres you need and they arrive as one continuous piece.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hollow?\u003c\/strong\u003e\u003cbr\u003eNo. It is a solid sponge section, skinned on all four faces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eNo adhesive backing is listed for this strip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you sell other sizes?\u003c\/strong\u003e\u003cbr\u003eYes, we list several extruded sponge strip sizes, including 3 x 16 mm and 12.5 x 19 mm.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure this is the size you need? Contact us before ordering and we will help.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416120373627,"sku":"10004575","price":9.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10004575_1.jpg?v=1789260287"},{"product_id":"extruded-sponge-strip-3mm-x-16mm-black-epdm-rubber-per-metre","title":"Extruded Sponge Strip 3mm x 16mm – Universal Fit – Closed-Cell EPDM Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA thin, flat black sponge strip, 3 mm by 16 mm, extruded from closed-cell EPDM and skinned on all four faces.\u003c\/strong\u003e Sold by the metre. The maker is phasing this size out, so stock is limited.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSection\u003c\/th\u003e\n\u003ctd\u003e3 x 16 mm flat rectangle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFit\u003c\/th\u003e\n\u003ctd\u003eUniversal (no specific vehicle listed by the maker)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCell type\u003c\/th\u003e\n\u003ctd\u003eClosed cell (non-intercellular)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSkinned on all 4 sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eapprox. 0.03 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eEXSS3X16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eLimited stock; being removed from the maker's regular range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre; several metres come as one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004573\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy closed-cell EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eThe cells in this sponge are sealed off from one another rather than open and linked, and every face carries a smooth skin. EPDM handles sunlight, ozone and weather well, so the strip stays soft and springy for years.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eYour ordered length of 3 x 16 mm sponge strip, in one piece (order 3 for a 3 m length)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure first.\u003c\/strong\u003e Measure the run and add a little for trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the size.\u003c\/strong\u003e At 3 mm thick this is a low-profile strip; make sure it suits your gap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the surface.\u003c\/strong\u003e Remove old rubber, adhesive and grease and let it dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLay it flat.\u003c\/strong\u003e Work from one end without stretching the strip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim square.\u003c\/strong\u003e Cut with a sharp blade or scissors and butt the ends neatly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the metres you need and they arrive as one continuous piece.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hollow or profiled?\u003c\/strong\u003e\u003cbr\u003eNo. It is a plain, solid flat section, 3 mm by 16 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eNo adhesive backing is listed for this strip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill you have more?\u003c\/strong\u003e\u003cbr\u003eThe maker is removing this size from regular stock, so order what you need while it is available.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure this is the size you need? Contact us before ordering and we will help.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416120406395,"sku":"10004573","price":4.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10004573_section.png?v=1794497581"},{"product_id":"extruded-sponge-strip-12-5mm-x-19mm-black-epdm-rubber-per-metre","title":"Extruded Sponge Strip 12.5mm x 19mm – Universal Fit – Closed-Cell EPDM Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA solid-section black sponge strip, 12.5 mm by 19 mm, extruded from closed-cell EPDM and skinned on all four faces.\u003c\/strong\u003e Buy it by the metre and cut it to the run you need.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSection\u003c\/th\u003e\n\u003ctd\u003e12.5 x 19 mm solid rectangle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFit\u003c\/th\u003e\n\u003ctd\u003eUniversal (no specific vehicle listed by the maker)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCell type\u003c\/th\u003e\n\u003ctd\u003eClosed cell (non-intercellular): the cells are not linked to each other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSkinned on all 4 sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eapprox. 0.15 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eEXSS12.5X19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre; several metres come as one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004571\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy closed-cell EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eBecause the cells are sealed off from one another, the strip compresses under load without acting like a wick, and the skin on every face keeps the outside smooth and tidy. EPDM itself copes well with sunlight, ozone and weather, so it stays flexible far longer than older natural-rubber sponge.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eYour ordered length of 12.5 x 19 mm sponge strip, in one piece (order 3 for a 3 m length)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure first.\u003c\/strong\u003e Measure the run and add a little for trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the gap.\u003c\/strong\u003e Make sure the space you are sealing suits a 12.5 x 19 mm section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the surface.\u003c\/strong\u003e Remove old rubber, adhesive and grease so the face is clean and dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLay it, don't stretch it.\u003c\/strong\u003e Work from one end and let the strip sit naturally.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim square.\u003c\/strong\u003e Cut with a sharp blade and butt the ends neatly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the number of metres you need and it arrives as one continuous piece.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hollow?\u003c\/strong\u003e\u003cbr\u003eNo. It is a solid sponge section, skinned on all four faces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich way up does it go?\u003c\/strong\u003e\u003cbr\u003eThat depends on your job: the section is 12.5 mm one way and 19 mm the other, so check which dimension suits your gap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eNo adhesive backing is listed for this strip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you sell other sizes?\u003c\/strong\u003e\u003cbr\u003eYes, we list several extruded sponge strip sizes. Search our store for \"sponge strip\" to compare them.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure this is the size you need? Contact us before ordering and we will help.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416120439163,"sku":"10004571","price":15.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10004571_gen_closeup.jpg?v=1794497550"},{"product_id":"extruded-sponge-strip-10mm-x-19mm-fits-morris-minor-per-metre","title":"Boot Seal Sponge Strip 10mm x 19mm – Fits Morris Minor – Closed-Cell EPDM Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA black closed-cell EPDM sponge strip, 10 x 19 mm and skinned on all four sides, used as the boot seal on the Morris Minor.\u003c\/strong\u003e It is sold by the metre and sent as one continuous length, so you can cut it to suit your boot opening.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eMorris Minor boot seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSection\u003c\/th\u003e\n\u003ctd\u003eRectangular, 10 mm x 19 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eClosed-cell (non-intercellular) EPDM sponge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSkinned on all four sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eEXSS10X19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.17 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, in one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004568\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy closed-cell EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eIn closed-cell sponge each tiny air pocket is sealed off from its neighbours, so the strip compresses softly under the boot lid without acting like a sponge for rainwater. EPDM as the base rubber keeps it flexible in sunlight and wet weather, and the skin on every face gives a smooth, neat finish.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThe number of metres you order, in one piece (for example, a quantity of 3 = one 3 m length)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure\u003c\/strong\u003e the old seal run and add a little for trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the old seal\u003c\/strong\u003e and scrape off any old adhesive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDegrease\u003c\/strong\u003e the mounting face or channel so it is clean and dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLay the strip in\u003c\/strong\u003e without stretching it, starting at one end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and join\u003c\/strong\u003e with a sharp blade, cutting square and butting the ends neatly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the metres you need and you get one unbroken length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I need for a Morris Minor boot?\u003c\/strong\u003e\u003cbr\u003eMeasure round your boot opening (or the old seal) and round up to the next metre.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it soak up water?\u003c\/strong\u003e\u003cbr\u003eClosed-cell sponge has sealed cells rather than open pores, so it does not wick water through like an open-cell foam.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it for other jobs?\u003c\/strong\u003e\u003cbr\u003eYes. It is a plain 10 x 19 mm rectangle, so it suits any gap that calls for that size of soft seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I fix it in place?\u003c\/strong\u003e\u003cbr\u003eFollow the method used for your original seal. If the old one was glued, use a contact adhesive suitable for EPDM rubber.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right strip, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416120570235,"sku":"10004568","price":13.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10004568_gen_flatlay.jpg?v=1794496111"},{"product_id":"boot-seal-gasket-fits-triumph-stag","title":"Rear Wing Badge \/ Side Repeater Lamp Gasket – Fits Triumph Stag – EPDM Sponge, Black – Each","description":"\u003cp\u003e\u003cstrong\u003eThe thin sponge gasket that sits between the Triumph Stag rear wing badge or side repeater lamp and the paintwork, made in black EPDM sponge to replace original part 150652.\u003c\/strong\u003e It cushions the fitting, protects the paint and stops water creeping in behind it.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph Stag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eRear wing badge and side repeater lamp, fitting to body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eFlat gasket with open centre and rounded ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOE reference\u003c\/th\u003e\n\u003ctd\u003e150652\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eGSKT02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e11 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003eEach (one gasket)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004668\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eSponge EPDM compresses easily under a light fitting, so it seals on curved panels without the fitting needing to be overtightened. It shrugs off rain, road salt and sunlight, and will not stain the paint.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × badge \/ repeater lamp gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe badge and lamp are not included. You need one gasket for each fitting you refit.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the fitting.\u003c\/strong\u003e Undo the badge or lamp from behind the panel and lift it away carefully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean up.\u003c\/strong\u003e Peel off the old gasket and clean the paint and the base of the fitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition the gasket.\u003c\/strong\u003e Lay it on the fitting so the opening lines up with the holes in the body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefit.\u003c\/strong\u003e Tighten evenly until the sponge just compresses; do not crush it flat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck.\u003c\/strong\u003e Look round the edge for gaps before you finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a boot seal?\u003c\/strong\u003e\u003cbr\u003eNo. Despite its old listing name, this is the small gasket for the Stag rear wing badge and side repeater lamp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many do I need?\u003c\/strong\u003e\u003cbr\u003eOne per badge or lamp. Each unit is a single gasket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same for the badge and the lamp?\u003c\/strong\u003e\u003cbr\u003eYes, part 150652 is listed for both positions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it mark my paint?\u003c\/strong\u003e\u003cbr\u003eNo. EPDM sponge is non-staining.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the badge included?\u003c\/strong\u003e\u003cbr\u003eNo, gasket only.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure this is the right gasket? Send us a photo of your fitting and we will check.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416122732923,"sku":"10004668","price":4.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10004668_section.png?v=1794494291"},{"product_id":"sponge-section-dual-hardness-seal-fits-mini-other-classic-cars-per-metre","title":"Opening Quarter Light Seal – Fits Classic Mini Mk1 – Dual Hardness EPDM\/Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eThe seal for the classic Mini's rear opening quarter light (side window), Mk1 profile, made as a dual hardness extrusion to the OEM ALA5897 pattern.\u003c\/strong\u003e A firm black EPDM carrier with a narrow slot holds it on the edge, and a soft sponge lip seals against the body as the window closes.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eClassic Mini, Mk1-type rear opening quarter light (opening rear side window)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003eALA5897\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile size\u003c\/th\u003e\n\u003ctd\u003e16 mm wide x 22.5 mm high on the profile drawing (catalogue: approx. 16 x 20 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSlot\u003c\/th\u003e\n\u003ctd\u003eApprox. 2 mm wide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eDual hardness: dense EPDM carrier, EPDM sponge lip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.17 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOther uses\u003c\/th\u003e\n\u003ctd\u003eWindow and door sealing on other classic cars\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, in one continuous length (extrusion, not a moulded frame)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code \/ SKU\u003c\/th\u003e\n\u003ctd\u003eSRS127 \/ 10006636\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy dual hardness EPDM\u003c\/h3\u003e\n\u003cp\u003eThe dense carrier grips its edge firmly and will not stretch out of shape, while the sponge lip compresses easily so the window latch closes without strain. EPDM resists UV, ozone and rain, so it keeps sealing long after old rubber has gone hard.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThe number of metres you order, as one unbroken length of SRS127 quarter light seal\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure both windows.\u003c\/strong\u003e Measure the run on each opening quarter light, add some for trimming and order the total in whole metres.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork on the bench.\u003c\/strong\u003e Take the opening window out if you can; it is far easier to fit the seal flat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the edge.\u003c\/strong\u003e Strip the old seal and clean the edge that will sit in the 2 mm slot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress it on.\u003c\/strong\u003e Start at a corner and press the slot over the edge, easing it round the curves without stretching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and refit.\u003c\/strong\u003e Cut a little long, butt the ends tight, refit the window and check it closes and latches.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the right seal for my Mini?\u003c\/strong\u003e\u003cbr\u003eIt is the Mk1-type opening quarter light profile (ALA5897). Compare your old seal with our section drawing before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I get a seal for each side?\u003c\/strong\u003e\u003cbr\u003eYou buy it by the metre. Measure both windows and order the total; it arrives as one length that you cut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do the heights differ?\u003c\/strong\u003e\u003cbr\u003eThe catalogue says approx. 20 mm high; the profile drawing shows 22.5 mm. Use the drawing to match your old seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need glue?\u003c\/strong\u003e\u003cbr\u003eUsually not; the slot grips the edge. A small dab of adhesive suited to EPDM at the joint helps keep the ends together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it on other cars?\u003c\/strong\u003e\u003cbr\u003eYes, wherever this profile suits an opening window or door edge.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure this is the right profile? Send us a photo of the cut end of your old seal and we will check it before you order.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416123060603,"sku":"10006636","price":12.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10006636_3d.png?v=1794526459"},{"product_id":"sponge-section-seal-fits-classic-mini-vans-other-applications-per-metre","title":"Rear Door Seal – Fits Classic Mini Van \u0026 Estate (Left-Hand Door) – EPDM Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eThe sponge rubber section for the left-hand rear door of the classic Mini Van and Estate, made in black expanded EPDM to the OEM 14A7609 pattern.\u003c\/strong\u003e It has a pointed crest that meets the closing door, a concave outer face and a narrow slot along the base. It also works as a general-purpose door or hatch seal.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eClassic Mini Van and Mini Estate, left-hand rear door\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003e14A7609\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOther uses\u003c\/th\u003e\n\u003ctd\u003eDoor and hatch sealing on cars, buses, caravans, rail and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile size\u003c\/th\u003e\n\u003ctd\u003e17.5 mm wide x 17 mm high on the profile drawing (catalogue: approx. 21 x 20 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSlot\u003c\/th\u003e\n\u003ctd\u003eApprox. 1.5 mm, along the base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded EPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.14 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, in one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code \/ SKU\u003c\/th\u003e\n\u003ctd\u003eSRS125 \/ 10004121\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eClosed-cell EPDM sponge compresses easily, so the rear door shuts without force, then springs back to keep out rain and draughts. EPDM resists UV, ozone and weather, so it lasts far longer than the original rubber that goes hard and flat on old vans.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThe number of metres you order, as one unbroken length of SRS125 sponge section\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eAdhesive is not included.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the door.\u003c\/strong\u003e Measure the full run on the left-hand rear door and add about 100 mm for trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip and clean.\u003c\/strong\u003e Remove the old seal and every trace of old glue, treat any rust and degrease the face.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlue it in.\u003c\/strong\u003e Use a contact adhesive suited to EPDM and lay the seal in without stretching it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork the corners.\u003c\/strong\u003e Ease it round the door corners gently so the crest stays upright.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and check.\u003c\/strong\u003e Butt the ends tightly, then close the door and check it seals all round.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the right-hand rear door?\u003c\/strong\u003e\u003cbr\u003eOEM 14A7609 is the left-hand door seal. The right-hand door uses a different seal, so check your old profile against our drawing first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many metres do I need?\u003c\/strong\u003e\u003cbr\u003eMeasure your door. Order whole metres and you receive one continuous length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do the sizes differ?\u003c\/strong\u003e\u003cbr\u003eThe supplier catalogue gives approx. 21 x 20 mm; the profile drawing shows 17.5 x 17 mm. Go by the drawing when matching your old seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eNo. Bond it with a contact adhesive suited to EPDM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it on other vehicles?\u003c\/strong\u003e\u003cbr\u003eYes. Any door or hatch that needs this profile can use it.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure this is the right profile? Send us a photo of the cut end of your old seal and we will check it before you order.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416123126139,"sku":"10004121","price":8.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10004121_3d.png?v=1794526649"},{"product_id":"sponge-section-seal-fits-triumph-tr2-tr3-per-metre","title":"Door Seal with Hook – Fits Triumph TR2 \u0026 TR3 – Dual-Hardness EPDM\/Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA dual-hardness door seal for the Triumph TR2 and TR3: a firm EPDM base topped by a soft black sponge hook section.\u003c\/strong\u003e The base keeps the seal in place while the sponge lip folds as the door shuts, closing the gap against draughts and rain.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph TR2 and TR3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eDoor seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eDual hardness: dense EPDM base, expanded sponge stem and hooked lip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003e19 mm wide x 16 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBase width\u003c\/th\u003e\n\u003ctd\u003e8.5 mm (catalogue: approx. 8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM and EPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.1 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, in one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code \/ SKU\u003c\/th\u003e\n\u003ctd\u003eSRS117 \/ 10006629\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy dual hardness\u003c\/h3\u003e\n\u003cp\u003eThe dense EPDM base gives the seal a stable footing that will not squash flat, and the sponge hook is soft enough to fold without making the door hard to close. Both parts are EPDM, so they shrug off sunlight, ozone and weather.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eDual-hardness door seal, cut to the number of metres you order and supplied as one piece\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure each door opening\u003c\/strong\u003e and add about 100 mm per run for trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip and clean.\u003c\/strong\u003e Remove the old seal and all old glue and rust; let the metal dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the direction.\u003c\/strong\u003e Lay a short piece in place first so the hook faces the way the old seal did.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit it as the original.\u003c\/strong\u003e Fix it the same way the old seal was held, working along without stretching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and test.\u003c\/strong\u003e Butt the ends tight and close the door to check the seal all round.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I need?\u003c\/strong\u003e\u003cbr\u003eMeasure both door openings and order the total in whole metres. It is supplied as one length, so cut it into the runs you need.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it priced?\u003c\/strong\u003e\u003cbr\u003ePer metre.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it have adhesive backing?\u003c\/strong\u003e\u003cbr\u003eNo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the base solid?\u003c\/strong\u003e\u003cbr\u003eYes. The black base is dense EPDM; the stem and hook are sponge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it right for my TR3A?\u003c\/strong\u003e\u003cbr\u003eThe supplier lists it for TR2 and TR3. If your car is a TR3A or later, send us a photo of the old seal's cut end and we will compare it.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right profile, contact us before ordering.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416123257211,"sku":"10006629","price":13.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/triumph-tr2-tr3-door-seal-hook-fitting-ba752b4b-db33-4c1f-8ed7-fd8e2f90b586.jpg?v=1794564814"},{"product_id":"hood-seal-fits-triumph-spitfire-per-metre","title":"Hood Seal – Fits Triumph Spitfire – Dual-Hardness EPDM \/ Sponge Angle Section, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA dual-hardness angle-section hood seal for the Triumph Spitfire: a firm EPDM base to mount it and a soft sponge body and lip to seal against.\u003c\/strong\u003e Sold by the metre and supplied as one continuous length, so you can cut it to the run on your car.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph Spitfire hood seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eAngle section with an extended sealing lip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eDual hardness: dense EPDM base, EPDM sponge body and lip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize (supplier drawing)\u003c\/th\u003e\n\u003ctd\u003e28 mm wide × 23.5 mm high, 8 mm base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize (supplier text)\u003c\/th\u003e\n\u003ctd\u003eApprox. 21 mm wide × 14 mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.22 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, in one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code \/ SKU\u003c\/th\u003e\n\u003ctd\u003eSRS144 \/ 10006652\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy dual hardness\u003c\/h3\u003e\n\u003cp\u003eThe firm base holds the seal in place and keeps its shape where it is mounted, while the soft sponge lip flexes and follows the closing panel. Both parts are EPDM, which resists sunlight, rain and ozone well.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eDual-hardness hood seal, cut to the number of metres ordered and supplied as one length\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompare first.\u003c\/strong\u003e Hold the cut end of your old seal against our drawing before you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote the direction.\u003c\/strong\u003e Before removing the old seal, note which way its lip faces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the mounting.\u003c\/strong\u003e Remove old adhesive, dirt and rust so the base sits down fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit without stretching.\u003c\/strong\u003e Seat the dense base first with the lip facing the same way as before.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and check.\u003c\/strong\u003e Cut a little long, butt the ends, then close the panel and check the lip touches all along.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the metres you need and it arrives as one piece.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are two sizes quoted?\u003c\/strong\u003e\u003cbr\u003eOur supplier's drawing shows 28 × 23.5 mm with an 8 mm base, while their written description says about 21 × 14 mm. Please measure your old seal; if it does not match the drawing, contact us before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it EPDM?\u003c\/strong\u003e\u003cbr\u003eYes. Dense EPDM base with an EPDM sponge body and lip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used elsewhere?\u003c\/strong\u003e\u003cbr\u003eYes. The same section is used on doors, windows and hatches on cars, buses, caravans and boats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I paint it?\u003c\/strong\u003e\u003cbr\u003eNo. Leave EPDM unpainted and clean it with mild soapy water.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right seal for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416123912571,"sku":"10006652","price":17.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10006652_3d.png?v=1794526460"},{"product_id":"sponge-rubber-seal-fits-jaguar-mk7-hood-cantrail-per-metre","title":"Hood Cantrail Seal – Fits Jaguar XK120 \u0026 XK140 – Black EPDM Sponge – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA hood cantrail seal for the Jaguar XK120 and XK140, made in black expanded EPDM sponge to the BD4814 pattern.\u003c\/strong\u003e It runs along the cantrail where the hood frame comes down, and its hollow core lets it squash flat under light pressure to keep wind and rain out.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar XK120 and XK140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eHood cantrail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eRounded section with a flat back and an angled hollow slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize (profile drawing)\u003c\/th\u003e\n\u003ctd\u003e16 mm wide × 14 mm high; flat back 11 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalogue size\u003c\/th\u003e\n\u003ctd\u003eQuoted by the supplier as approx. 12 mm wide × 14 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded (sponge) EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003eBD4814\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.09 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre – one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU \/ code\u003c\/th\u003e\n\u003ctd\u003e10006634 \/ SRS123\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eA cantrail seal is squeezed every time the hood goes up and sits in the sun when it is down. Closed-cell EPDM sponge recovers its shape after compression and resists UV and ozone, so it keeps sealing instead of taking a permanent set.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThe number of metres you order, as one continuous length of SRS123 sponge seal\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eAdhesive is not included.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the cantrail.\u003c\/strong\u003e Measure each side and add about 100 mm for trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the rail.\u003c\/strong\u003e Remove the old seal and glue and degrease the face.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat back down.\u003c\/strong\u003e Glue the flat back to the rail with an EPDM-compatible contact adhesive so the rounded face meets the hood frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not stretch.\u003c\/strong\u003e Lay it in place along the curve without pulling, or it will shrink back.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest.\u003c\/strong\u003e Raise and latch the hood and check the seal is lightly squeezed along its length.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does it no longer say Mk7?\u003c\/strong\u003e\u003cbr\u003eOur listing used to say Jaguar Mk7 saloon. Jaguar specialists list BD4814 as the XK hood cantrail seal, so we have corrected the fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the metres you need and we cut one continuous length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do the sizes differ?\u003c\/strong\u003e\u003cbr\u003eThe supplier's profile drawing measures 16 × 14 mm; their catalogue text says approx. 12 × 14 mm. Our drawing uses the profile drawing figures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine Jaguar part?\u003c\/strong\u003e\u003cbr\u003eNo. It is a quality aftermarket reproduction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I paint it?\u003c\/strong\u003e\u003cbr\u003eNo. Leave EPDM unpainted; clean it with mild soapy water.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right profile for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416124240251,"sku":"10006634","price":7.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/jaguar-xk120-xk140-hood-cantrail-seal-fitting-49c8e42e-4cfd-4453-958e-6a5b80c4a11e.jpg?v=1794564565"},{"product_id":"sponge-rubber-seal-fits-jaguar-xk-per-metre","title":"Boot Lid Seal – Fits Jaguar XK – Black EPDM Sponge – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA sponge boot lid seal for the classic Jaguar XK, made in black expanded EPDM to the BD4875 pattern.\u003c\/strong\u003e The rounded top takes the weight of the closing lid, and the curled lip and angled slot let the section flex and seal without the lid having to be slammed.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eClassic Jaguar XK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eBoot (trunk) lid seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eRounded top, curled lip over an angled slot, flat base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSlot width\u003c\/th\u003e\n\u003ctd\u003eApprox. 3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize (profile drawing)\u003c\/th\u003e\n\u003ctd\u003e16 mm wide × 13.5 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalogue size\u003c\/th\u003e\n\u003ctd\u003eQuoted by the supplier as approx. 18 mm wide × 15 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded (sponge) EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003eBD4875\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.10 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre – one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU \/ code\u003c\/th\u003e\n\u003ctd\u003e10006628 \/ SRS116\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eClosed-cell EPDM sponge compresses easily and springs back, so the lid closes with light pressure and still seals. Unlike the natural rubber of the period it resists sunlight, ozone and water, so it does not go hard and crack after a few seasons.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThe number of metres you order, as one continuous length of SRS116 sponge seal\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eAdhesive is not included.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the run.\u003c\/strong\u003e Measure round the boot opening and add about 100 mm for trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean back.\u003c\/strong\u003e Remove the old seal and glue, treat any rust and degrease the face.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry fit.\u003c\/strong\u003e Lay a short piece in place and close the lid to check which way the lip should face.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlue it in.\u003c\/strong\u003e Use a contact adhesive suitable for EPDM and lay the seal in without stretching it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoin and test.\u003c\/strong\u003e Butt the ends tightly at the least visible point and check the lid closes evenly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the metres you need and it is cut as one continuous length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich XK does it fit?\u003c\/strong\u003e\u003cbr\u003eBD4875 is listed by Jaguar specialists as the XK boot lid seal. If you are unsure about your model, send us a photo of the old seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do the sizes differ?\u003c\/strong\u003e\u003cbr\u003eThe supplier's profile drawing gives 16 × 13.5 mm, while their catalogue text says approx. 18 × 15 mm. Our drawing uses the profile drawing figures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine Jaguar part?\u003c\/strong\u003e\u003cbr\u003eNo. It is a quality aftermarket reproduction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I paint it?\u003c\/strong\u003e\u003cbr\u003eNo. Leave EPDM unpainted; clean it with mild soapy water.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right profile for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416124305787,"sku":"10006628","price":12.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/srs116-jaguar-xk-boot-lid-seal-fitting-da0b1991-e094-4e0a-900f-4b8404c806ef.jpg?v=1794600041"},{"product_id":"sponge-rubber-seal-fits-jaguar-mk1-mk2-boot-trunk-lid-per-metre","title":"Boot Lid Aperture Seal – Fits Jaguar Mk1 \u0026 Mk2 Saloon – Black EPDM Sponge – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA sponge seal for the boot lid aperture of the Jaguar Mk1 and Mk2 saloon, in black expanded EPDM to the BD14100 pattern.\u003c\/strong\u003e Its C-shaped channel pushes over the aperture edge and the soft body gives the lid something to close onto, keeping water out of the boot.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar Mk1 and Mk2 saloon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eAround the boot (trunk) lid aperture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eHooked top lip over a C-shaped channel, solid sponge body with a sloping outer lip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel range\u003c\/th\u003e\n\u003ctd\u003eChannel takes panels up to 6.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize (profile drawing)\u003c\/th\u003e\n\u003ctd\u003e20.8 mm wide × 21.2 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalogue size\u003c\/th\u003e\n\u003ctd\u003eQuoted by the supplier as approx. 20 mm wide × 16 mm deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded (sponge) EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003eBD14100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.15 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre – one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU \/ code\u003c\/th\u003e\n\u003ctd\u003e10003873 \/ SRS114\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eThe original boot seals on these saloons were natural rubber, which hardens and cracks with age so the lid no longer seals. Closed-cell EPDM sponge compresses with very little force and recovers again, and it resists UV, ozone and water, so it keeps sealing for many years.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThe number of metres you order, as one continuous length of SRS114 sponge channel\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eAdhesive is not included.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the aperture.\u003c\/strong\u003e Run a tape round the boot opening and add about 100 mm for the joint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the edge.\u003c\/strong\u003e Remove the old seal and glue, treat rust and file off any sharp burrs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart at the bottom.\u003c\/strong\u003e Begin in the middle of the lower edge so the joint ends up where it is least visible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush it home.\u003c\/strong\u003e Press the channel over the edge all the way round, easing it round the corners without stretching. A little EPDM-compatible adhesive in the channel helps on worn edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoin and test.\u003c\/strong\u003e Cut square, butt the ends tight and close the lid to check it seals evenly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the Mk1 as well as the Mk2?\u003c\/strong\u003e\u003cbr\u003eYes. Jaguar specialists list BD14100 as the boot lid aperture seal for both the Mk1 and Mk2 saloons.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the metres you need and we cut one continuous length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat thickness of panel will it grip?\u003c\/strong\u003e\u003cbr\u003eThe channel is made for panels up to 6.3 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do the quoted sizes differ?\u003c\/strong\u003e\u003cbr\u003eThe supplier's profile drawing measures 20.8 × 21.2 mm; their catalogue text says approx. 20 × 16 mm. Our drawing uses the profile drawing figures. Compare with your old seal if unsure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine Jaguar part?\u003c\/strong\u003e\u003cbr\u003eNo. It is a quality aftermarket reproduction.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right profile for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416124338555,"sku":"10003873","price":13.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/srs114-jaguar-boot-lid-seal-fitting-a655bdaa-382f-47e5-b6e3-889ab1282051.jpg?v=1794600994"},{"product_id":"sponge-rubber-seal-fits-jaguar-xk140-per-metre","title":"V-Profile Door \u0026 Boot Seal – Fits Jaguar XK140 – Black EPDM Sponge – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA V-profile sponge seal for the Jaguar XK140, made in black expanded EPDM to replace the original BD9345 rubber.\u003c\/strong\u003e The two sponge arms form a soft V that the closing panel presses into, while the flat, hollow-cored base sits on the body.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar XK140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eDoor-to-sill seal; the same BD9345 section is also listed for the XK boot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eV-shaped top with two sponge arms, flat base with a rectangular hollow core\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize (profile drawing)\u003c\/th\u003e\n\u003ctd\u003e23 mm across the arms × 15 mm high; base 15 mm wide, 6.5 mm deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalogue size\u003c\/th\u003e\n\u003ctd\u003eQuoted by the supplier as approx. 13 mm wide × 15 mm deep; compare with your old seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded (sponge) EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003eBD9345\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.07 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre – order 3 to get one continuous 3 m length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU \/ code\u003c\/th\u003e\n\u003ctd\u003e10006621 \/ SRS104EP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eExpanded EPDM is a closed-cell sponge: it squashes easily under a door or lid, then springs back, and it stands up to sunlight, ozone and rain far better than the natural rubber used in the 1950s. That means the V keeps its shape and keeps sealing instead of going hard and flat.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThe number of metres you order, as one continuous length of SRS104EP sponge seal\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eAdhesive is not included.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the run.\u003c\/strong\u003e Measure each length you need and add about 100 mm for trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip and clean.\u003c\/strong\u003e Remove the old rubber and old glue, treat any rust and degrease the face.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the profile.\u003c\/strong\u003e Hold a short offcut against the panel and close it to check the V lines up before gluing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlue it in.\u003c\/strong\u003e Use a contact adhesive suitable for EPDM and lay the seal in without stretching it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and test.\u003c\/strong\u003e Cut square, butt the ends tightly and close the door to check the seal all round.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the number of metres you need and it is cut as one continuous length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do the sizes differ?\u003c\/strong\u003e\u003cbr\u003eThe supplier's profile drawing gives 23 × 15 mm, while their catalogue text says approx. 13 × 15 mm. Our drawing uses the figures from the profile drawing. If in doubt, measure your old seal or send us a photo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine Jaguar part?\u003c\/strong\u003e\u003cbr\u003eNo. It is a quality aftermarket reproduction of BD9345.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it on the boot as well?\u003c\/strong\u003e\u003cbr\u003eJaguar specialists list BD9345 for the XK boot too. Check the profile against your old boot seal before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with glue?\u003c\/strong\u003e\u003cbr\u003eNo. Use a contact adhesive suitable for EPDM.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right profile for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416124371323,"sku":"10006621","price":14.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/jaguar-xk140-v-profile-door-boot-seal-fitting-06b69524-a935-48ed-85ee-b5036adb435d.jpg?v=1794564563"},{"product_id":"sponge-rubber-d-section-seal-12-5mm-x-12-5mm-per-metre","title":"Self-Adhesive Sponge D Section Seal – Fits Jaguar \u0026 MG Door Apertures (BD2159SA) – 12.5 x 12.5mm Expanded EPDM, Black – Each (25m Coil)","description":"\u003cp\u003e\u003cstrong\u003eA self-adhesive sponge D seal in black expanded EPDM, 12.5 mm across the base and 12.5 mm deep, supplied as one complete 25 m coil.\u003c\/strong\u003e It is used as a door seal on classic cars including Jaguar (OE reference BD2159SA) and MG, and works on any lid, hatch or panel where a closing face meets a flat landing.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eDoor seal on classic Jaguar (BD2159SA) and MG; general door, bonnet and boot sealing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eD section with a round hollow core\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBase\u003c\/th\u003e\n\u003ctd\u003e12.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e12.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eSelf-adhesive backing on the flat base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded EPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2 kg per coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003eBD2159SA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003eEach: one 25 m coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eSRS004SAB-25M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eIP-CS-15435184341371\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eExpanded EPDM squashes easily under a closing door or lid and recovers when it opens. It resists sunlight, ozone and weather, so it suits exterior door and boot apertures.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 x 25 m coil of self-adhesive sponge D section\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eOnly need a few metres without adhesive? The same 12.5 x 12.5 mm profile is sold \u003ca href=\"\/products\/sponge-rubber-d-section-12-5mm-x-12-5mm-black-per-metre\"\u003eby the metre, non-adhesive\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the landing.\u003c\/strong\u003e The face it sticks to should be at least 12.5 mm wide so the whole base is supported.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and dry.\u003c\/strong\u003e Remove old seal and glue, wipe with spirit and let it dry. Fit in warm, dry conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeel as you go.\u003c\/strong\u003e Peel a short length of liner at a time and press the base down firmly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not stretch it.\u003c\/strong\u003e Stretched sponge shrinks back and opens the joint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClose the joint.\u003c\/strong\u003e Cut square, a little long, and butt the ends tight at the least visible point.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price for one metre or the whole coil?\u003c\/strong\u003e\u003cbr\u003eThe whole coil: one 25 m length. A quantity of 2 sends two coils.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich side is sticky?\u003c\/strong\u003e\u003cbr\u003eThe flat base. The rounded crown faces the closing door or lid.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut it?\u003c\/strong\u003e\u003cbr\u003eYes. Cut square with a sharp knife.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it suit my Jaguar?\u003c\/strong\u003e\u003cbr\u003eIt matches the BD2159SA door seal reference. Compare a cut end of your old seal with the drawing if unsure.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right seal, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416124469627,"sku":"IP-CS-15435184341371","price":398.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/jaguar-mg-sponge-d-section-door-seal-fitting-60da57f9-7509-4982-8cee-41a0778e8214.jpg?v=1794564655"},{"product_id":"expanded-epdm-sponge-strip-fits-triumph-tr4-tr5-tr6-per-metre","title":"Gearbox Tunnel Seal Strip, 30mm with Raised Edges – Fits Triumph TR4, TR5 \u0026 TR6 – Expanded EPDM Sponge, Black – Each (2m Length)","description":"\u003cp\u003e\u003cstrong\u003eA wide black sponge strip with raised edges along both sides, used to seal the gearbox tunnel cover on the Triumph TR4, TR5 and TR6, and supplied as one ready-cut 2 metre length.\u003c\/strong\u003e The shallow channel between the edges helps it sit centred on the flange.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph TR4, TR5 and TR6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eGearbox \/ transmission tunnel cover seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eFlat strip with a raised edge on each side and a shallow centre channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003eApprox. 30 mm wide x 7 mm thick (supplier drawing: 29.5 x 6 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLength\u003c\/th\u003e\n\u003ctd\u003e2 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded EPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.14 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003eEach: one 2 m length per item ordered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004124 (supplier code SRS140-2M)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy expanded EPDM\u003c\/h3\u003e\n\u003cp\u003eThe tunnel seal keeps heat, fumes and draughts from the gearbox out of the cabin. EPDM sponge copes with the warmth near the transmission and stays soft enough to take up the small gaps between the cover and the floor.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 x black sponge tunnel seal strip, 2 m long\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eWe also sell a narrower 18 mm strip: \u003ca href=\"\/products\/expanded-epdm-sponge-strip-fits-triumph-tr4-tr5-tr6-per-metre-1\"\u003eTriumph TR4-TR6 tunnel seal strip, 18 mm, 1.3 m length\u003c\/a\u003e. Check which width your cover uses.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the cover.\u003c\/strong\u003e Lift the carpet, unbolt the tunnel cover and peel off the old strip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean both faces.\u003c\/strong\u003e Scrape away old glue and dirt from the cover flange and the floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-fit first.\u003c\/strong\u003e Lay the strip in place with the raised edges facing as before and mark any cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond it.\u003c\/strong\u003e Fix the strip to the cover flange with a contact adhesive, without stretching it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefit evenly.\u003c\/strong\u003e Bolt the cover down a little at a time so the sponge compresses evenly all round.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it sold?\u003c\/strong\u003e\u003cbr\u003eEach item is one 2 m length. If you need more, order two and butt the ends together neatly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a full kit for the tunnel?\u003c\/strong\u003e\u003cbr\u003eNo. It is a single strip. Measure your old seals first, as some cars use more than one strip or a mix of widths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it 30 mm or 29.5 mm wide?\u003c\/strong\u003e\u003cbr\u003eThe listing size is approx. 30 x 7 mm; the supplier drawing shows 29.5 x 6 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eNo. Use a contact adhesive suitable for EPDM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it elsewhere?\u003c\/strong\u003e\u003cbr\u003eYes. It also works as a general sealing strip on other classic cars, caravans and boats.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure it suits your car? Send us a photo of your old strip and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416128860539,"sku":"10004124","price":16.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/srs140-tunnel-seal-fitting-ddce1e7e-c118-4876-aef2-2d79fe5a0a9c.jpg?v=1794599174"},{"product_id":"expanded-epdm-sponge-strip-fits-triumph-tr4-tr5-tr6-per-metre-1","title":"Gearbox Tunnel Seal Strip, 18mm – Fits Triumph TR4, TR5 \u0026 TR6 – Expanded EPDM Sponge, Black – Each (1.3m Length)","description":"\u003cp\u003e\u003cstrong\u003eA thin black sponge strip that seals the gearbox tunnel cover to the floor on the Triumph TR4, TR5 and TR6, supplied as one ready-cut 1.3 metre length.\u003c\/strong\u003e One edge is raised slightly to help it seat against the cover.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph TR4, TR5 and TR6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eGearbox \/ transmission tunnel cover seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eFlat strip with one raised edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003eApprox. 18 mm wide x 4 mm thick (supplier drawing: 19 x 4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1.3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded EPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.05 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003eEach: one 1.3 m length per item ordered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004126 (supplier code SRS139-1.3M)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy expanded EPDM\u003c\/h3\u003e\n\u003cp\u003eA good tunnel seal keeps engine heat, fumes and draughts out of the cabin. EPDM sponge stays soft and springy under the heat near the gearbox, so it fills the small gaps between the cover and the floor.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 x black sponge tunnel seal strip, 1.3 m long\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eWe also sell a wider 30 mm tunnel strip with raised edges: \u003ca href=\"\/products\/expanded-epdm-sponge-strip-fits-triumph-tr4-tr5-tr6-per-metre\"\u003eTriumph TR4-TR6 tunnel seal strip, 30 mm, 2 m length\u003c\/a\u003e. Check which width your cover uses.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the cover.\u003c\/strong\u003e Take out the seats and carpet as needed, unbolt the tunnel cover and peel off the old strip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean both faces.\u003c\/strong\u003e Scrape away old glue and dirt from the cover flange and the floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-fit first.\u003c\/strong\u003e Lay the strip in place and mark where to cut before applying adhesive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond it.\u003c\/strong\u003e Fix the strip to the cover flange with a contact adhesive, without stretching it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefit evenly.\u003c\/strong\u003e Bolt the cover back down a little at a time so the sponge compresses evenly all round.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it sold?\u003c\/strong\u003e\u003cbr\u003eEach item is one 1.3 m length. If you need more, order two and butt the ends together neatly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a full kit for the tunnel?\u003c\/strong\u003e\u003cbr\u003eNo. It is a single strip. Some cars use more than one strip or a mix of widths, so measure your old seals first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it 18 mm or 19 mm wide?\u003c\/strong\u003e\u003cbr\u003eThe listing size is approx. 18 x 4 mm; the supplier drawing shows 19 x 4 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eNo. Use a contact adhesive suitable for EPDM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it elsewhere?\u003c\/strong\u003e\u003cbr\u003eYes. It also works as a general sealing strip on other classic cars, caravans and boats.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure it suits your car? Send us a photo of your old strip and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416128926075,"sku":"10004126","price":5.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/srs139-tunnel-seal-strip.jpg?v=1794598867"},{"product_id":"sponge-rubber-seal-fits-mg-mgb-bonnet-radiator-per-metre","title":"Bonnet \u0026 Radiator Sponge Seal – Fits MG MGB – EPDM Sponge, Black, 24 x 14.5mm – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA soft black EPDM sponge seal for the MG MGB bonnet and radiator, made to the AHH8887 and AHH7205 pattern and sold by the metre.\u003c\/strong\u003e The square sponge block with its hollow core squashes down to close the gap, while the flat side flange gives it a wide footprint to sit on.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eMG MGB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eBonnet seal and radiator seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM part numbers\u003c\/th\u003e\n\u003ctd\u003eAHH8887 (bonnet), AHH7205 (radiator)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eSponge block with an oval hollow core and a side flange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall size (profile drawing)\u003c\/th\u003e\n\u003ctd\u003e24 mm wide x 14.5 mm high (listed as approx. 24 x 14 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBlock \/ flange\u003c\/th\u003e\n\u003ctd\u003eBlock 14.5 mm wide; flange 5 mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded EPDM (sponge rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.11 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre: order the number of metres you need and it comes as one length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct code \/ SKU\u003c\/th\u003e\n\u003ctd\u003eSRS107EP \/ 10003917\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eClosed-cell EPDM sponge is soft enough to compress under a bonnet or radiator panel without forcing it, and it springs back each time. EPDM shrugs off heat, ozone and weather far better than the original rubber, so it does not go hard and crumbly in the engine bay.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eBlack EPDM sponge seal, cut to the number of metres ordered\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the old seal.\u003c\/strong\u003e Peel or pull out the old strip and note which way the flange faced.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the surface.\u003c\/strong\u003e Scrape off old adhesive and rust, then degrease so the new seal can bond.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry fit.\u003c\/strong\u003e Lay the seal in place and mark the length before you cut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond it.\u003c\/strong\u003e Use a suitable rubber-to-metal contact adhesive, working from one end without stretching the sponge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the gap.\u003c\/strong\u003e Close the bonnet gently and check the seal compresses evenly along its length.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it do both the bonnet and the radiator?\u003c\/strong\u003e\u003cbr\u003eYes. The same SRS107EP section is listed for the MGB bonnet seal (AHH8887) and the radiator seal (AHH7205).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I need?\u003c\/strong\u003e\u003cbr\u003eMeasure the old seal runs and add a little for trimming. It is sold per metre and supplied as one length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do the sizes differ slightly?\u003c\/strong\u003e\u003cbr\u003eThe supplier text says approx. 24 x 14 mm; the profile drawing shows 24 x 14.5 mm. Sponge sections vary a little, so treat them as nominal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it solid rubber?\u003c\/strong\u003e\u003cbr\u003eNo. It is expanded EPDM sponge with a hollow core, so it compresses easily.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure it matches?\u003c\/strong\u003e\u003cbr\u003eSend us a photo of the cut end of your old seal and we will check before you order.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416133349755,"sku":"10003917","price":21.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/mgb-bonnet-radiator-sponge-seal-fitting-036cf21e-f1cd-480c-a0bd-9572d29cfa11.jpg?v=1794568464"},{"product_id":"sponge-rubber-seal-fits-jaguar-e-type-per-metre","title":"Tailgate Sponge Rubber Seal, Hook Section – Fits Jaguar E-Type – Expanded EPDM, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA black expanded-EPDM sponge seal in a hook section for the Jaguar E-Type tailgate, sold by the metre.\u003c\/strong\u003e The soft sponge closes the gap round the tailgate to keep out rain, dust and draughts without making the tailgate hard to shut.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar E-Type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eTailgate seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eHook section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile size\u003c\/th\u003e\n\u003ctd\u003e20.0 mm wide × 18.0 mm high (±1.6 mm), from the supplier's profile data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded EPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM part number\u003c\/th\u003e\n\u003ctd\u003eBD23347\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eSRS115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.07 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004051\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy expanded EPDM\u003c\/h3\u003e\n\u003cp\u003eExpanded (sponge) EPDM is full of tiny air cells, so it squashes easily and springs back, giving a light, even seal along the whole tailgate. EPDM also stands up to sunlight, ozone and wet weather, so the seal stays soft instead of flattening and cracking.\u003c\/p\u003e\n\u003ch3\u003eLength \u0026amp; ordering\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold per metre:\u003c\/strong\u003e the price is for one metre. Order the number of metres you need.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece:\u003c\/strong\u003e if you order several metres they are supplied as one continuous length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure first:\u003c\/strong\u003e measure the run of your old seal and add a little for trimming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHook-section sponge seal, cut to the number of metres ordered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip the old seal.\u003c\/strong\u003e Remove the old seal and all traces of old adhesive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and dry.\u003c\/strong\u003e Clean the mounting face, treat any rust and let it dry fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry fit.\u003c\/strong\u003e Lay the new seal in place without stretching it and mark the length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFix it.\u003c\/strong\u003e Fit it the same way the original was held, working round steadily without pulling the sponge thin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the closing.\u003c\/strong\u003e Butt the ends neatly and check the tailgate closes evenly all the way round.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I need?\u003c\/strong\u003e\u003cbr\u003eMeasure the run of your old seal and order that many metres, plus a little for trimming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it one length or several pieces?\u003c\/strong\u003e\u003cbr\u003eSeveral metres come as one continuous length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size is the profile?\u003c\/strong\u003e\u003cbr\u003eThe supplier's profile data gives 20.0 mm wide by 18.0 mm high (±1.6 mm). Compare it with a cut end of your old seal before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used elsewhere on the car?\u003c\/strong\u003e\u003cbr\u003eIt is listed as the E-Type tailgate seal. If you want it for another position, ask us first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich part number does it replace?\u003c\/strong\u003e\u003cbr\u003eIt matches OEM part number BD23347.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right seal for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416136888699,"sku":"10004051","price":12.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/jaguar-e-type-tailgate-sponge-seal-fitting-945c4aee-ac0f-4bfc-895c-3cef3ea882bb.jpg?v=1794562450"},{"product_id":"door-handle-gaskets-fits-triumph-stag","title":"Door Handle Gasket – Fits Triumph Stag – EPDM Sponge Rubber, Black – Each","description":"\u003cp\u003e\u003cstrong\u003eA black EPDM sponge gasket that fits behind a Triumph Stag exterior door handle, sold singly.\u003c\/strong\u003e It cushions the handle against the paint and keeps water out of the door skin around the handle opening.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph Stag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart\u003c\/th\u003e\n\u003ctd\u003eDoor handle gasket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eDoor, bonnet and boot seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eFlat gasket with handle opening and fixing holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM part number\u003c\/th\u003e\n\u003ctd\u003e718205\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eGSKT03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.0135 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003e1 gasket (each)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004669\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eSponge rubber squeezes up as the handle is tightened, filling the small gaps between the handle base and the curved door skin. EPDM keeps that softness through years of sun and rain, where old gaskets go hard, shrink and let water track into the door.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × door handle gasket for the Triumph Stag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSold each: order one for each door handle you are doing.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the handle.\u003c\/strong\u003e Take off the door trim as needed and undo the handle fixings from inside the door.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the door skin.\u003c\/strong\u003e Peel off the old gasket, clean the area and touch in any bare metal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine up the gasket.\u003c\/strong\u003e Place it so the fixing holes line up with the handle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefit the handle.\u003c\/strong\u003e Tighten the fixings evenly until the sponge is lightly compressed; do not crush it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck operation.\u003c\/strong\u003e Make sure the handle and lock work freely before refitting the trim.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this one gasket or a pair?\u003c\/strong\u003e\u003cbr\u003eIt is one gasket, sold each. Order two for both doors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich part number does it replace?\u003c\/strong\u003e\u003cbr\u003eIt matches OEM part number 718205. Please check your part number before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stop water getting into the door?\u003c\/strong\u003e\u003cbr\u003eIt seals around the handle opening. Water can also enter at the window seals, so check those too if you have a wet door.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit other Triumph models?\u003c\/strong\u003e\u003cbr\u003eIt is listed for the Triumph Stag only. Ask us before ordering for any other car.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I re-use my old gasket?\u003c\/strong\u003e\u003cbr\u003eOld sponge gaskets are usually flattened and hard, so a new one is the better choice when the handle is off.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right gasket for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416136921467,"sku":"10004669","price":4.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10004669-door-handle-gaskets-fits-triumph-stag-section.png?v=1794478273"},{"product_id":"rear-lamp-gasket-fits-triumph-stag","title":"Rear Lamp Gasket – Fits Triumph Stag – EPDM Sponge Rubber – Each","description":"\u003cp\u003e\u003cstrong\u003eA flat EPDM sponge gasket that sits between the Triumph Stag rear lamp unit and the body, sold singly.\u003c\/strong\u003e A fresh gasket stops water and dust getting behind the lamp, which is where corroded bulb holders and rusty lamp apertures usually start.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph Stag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart\u003c\/th\u003e\n\u003ctd\u003eRear lamp gasket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eDoor, bonnet and boot seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eListed as black (the maker's reference photo shows a light grey sponge; ask us if colour matters to you)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eFlat cut gasket with lamp openings and fixing holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM part number\u003c\/th\u003e\n\u003ctd\u003e519548G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eGSKT01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.002 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003e1 gasket (each)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004667\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eSponge rubber compresses as the lamp is tightened down, so it fills small gaps in the panel and makes a continuous seal. EPDM holds that softness for years without crumbling or going sticky, even with sun, rain and road spray on it.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × rear lamp gasket for the Triumph Stag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSold each: order one for each lamp you are doing.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the lamp.\u003c\/strong\u003e Undo the lamp fixings and lift the unit away, supporting the wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the panel.\u003c\/strong\u003e Peel off the old gasket, clean the body face and treat any rust before going further.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the bulb holders.\u003c\/strong\u003e While the lamp is off, clean the contacts and earths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine up the gasket.\u003c\/strong\u003e Place it so every opening and fixing hole lines up with the lamp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefit evenly.\u003c\/strong\u003e Tighten the fixings a little at a time. Stop once the sponge is lightly compressed; do not crush it.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this for one lamp or a pair?\u003c\/strong\u003e\u003cbr\u003eIt is sold each. Order two if you are doing both sides.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat colour is it?\u003c\/strong\u003e\u003cbr\u003eIt is listed as black, but the maker's reference photo shows a light grey sponge. If colour matters, contact us before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need sealant as well?\u003c\/strong\u003e\u003cbr\u003eNot normally. On a pitted or repaired panel, a thin bead of non-setting sealant around the outside edge can help.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich part number does it replace?\u003c\/strong\u003e\u003cbr\u003eIt matches OEM part number 519548G. Compare it with your old gasket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit other Triumphs?\u003c\/strong\u003e\u003cbr\u003eIt is listed for the Triumph Stag only. Ask us before ordering for any other car.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right gasket for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416136954235,"sku":"10004667","price":4.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/triumph-stag-rear-lamp-gasket-fitting-15e985e4-093f-4b02-984c-c1c845e39acc.jpg?v=1794561975"}],"url":"https:\/\/industrial-polymers.co.uk\/collections\/extruded-sponge.oembed","provider":"Industrial-polymers ","version":"1.0","type":"link"}