{"title":"Flexible Self Grip Rubber with Top Seal","description":null,"products":[{"product_id":"flexible-self-grip-rubber-top-seal-fits-classic-aston-martin-per-metre","title":"Self-Grip Top Tail Boot Seal DX94 – Fits Classic Aston Martin \u0026 1.6–3 mm Panels, 30 mm High – EPDM, Metal Insert \u0026 Sponge Tail, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA self-gripping edge trim with a curled sponge tail on top, used as the boot seal on classic Aston Martins and on any 1.6–3 mm flange that needs a soft seal for a lid or door to close onto.\u003c\/strong\u003e It pushes on by hand and needs no glue on the stated panel range.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eClassic Aston Martin boot opening; universal on 1.6–3 mm flanges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOE reference\u003c\/th\u003e\n\u003ctd\u003e055-077-0002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eU-shaped grip with a sponge tail curling over the top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e30.0 mm overall height, 13.5 mm tail reach, 14.0 mm grip depth, 4.5 mm grip mouth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrip\u003c\/th\u003e\n\u003ctd\u003eSolid EPDM rubber with a metal insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeal\u003c\/th\u003e\n\u003ctd\u003eSponge rubber tail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.26 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, cut as one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code \/ SKU\u003c\/th\u003e\n\u003ctd\u003eDX94 \/ 10004270\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\n\u003cp\u003eEPDM shrugs off UV, ozone and water far better than the older rubber mixes, so the sponge tail stays springy and the grip stays tight on the flange season after season. The metal insert gives the clamping force, so the seal stays where you put it.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThe number of metres you order, supplied as one continuous length (order 4 to get a single 4 m piece)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure first.\u003c\/strong\u003e The flange must be 1.6–3 mm thick for the grip to hold properly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the edge.\u003c\/strong\u003e Strip the old seal, clean off rust and grease, and touch in bare metal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTail the right way.\u003c\/strong\u003e Offer it up so the tail curls towards the lid or door that closes onto it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress it home.\u003c\/strong\u003e Push on by hand along a straight, then tap with a soft mallet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClose the gap.\u003c\/strong\u003e Ease round corners without stretching and butt the ends tightly, ideally at the bottom.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs it only for Aston Martin?\u003c\/strong\u003e\u003cbr\u003eNo. It is listed for the classic Aston Martin boot, but it works on any 1.6–3 mm flange that needs this style of seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I need?\u003c\/strong\u003e\u003cbr\u003eMeasure round the opening and add a little for the join. It is sold per metre and supplied in one piece.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich way does the tail face?\u003c\/strong\u003e\u003cbr\u003eTowards the panel that closes on it, so the lid presses the sponge down.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need glue?\u003c\/strong\u003e\u003cbr\u003eNot on a clean flange within range; the metal insert and fins hold it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a thinner-flange version?\u003c\/strong\u003e\u003cbr\u003eYes. See our \u003ca href=\"\/products\/flexible-self-grip-rubber-side-seal-universal-fit-1mm-to-2mm-panels-per-metre\"\u003e1–2 mm self-grip seal\u003c\/a\u003e for thinner panels.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Send us a photo of your old seal if you want us to check the profile before you order.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416127648123,"sku":"10004270","price":10.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/aston-martin-top-tail-boot-seal-dx94-fitting-4db261a2-8e8e-419d-bc01-9e1833330859.jpg?v=1794563989"},{"product_id":"flexible-self-grip-rubber-seal-fits-0-8mm-to-1-2mm-panels-per-metre","title":"Slim Flexible Self-Grip Top Seal with Sponge Loop – Fits 0.8mm to 1.2mm Panels (Universal) – EPDM \u0026 Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA slim push-on edge seal for very thin 0.8–1.2 mm sheet, only 6 mm wide, with a narrow hollow sponge loop on top of a metal-cored EPDM grip.\u003c\/strong\u003e It suits light-gauge panels, lockers, hatches and trim edges where a bulkier seal would not fit.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eSlim self-grip edge trim with a top sponge loop (code DX92)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003ePanel or sheet edges 0.8–1.2 mm thick (universal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e15.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall width\u003c\/th\u003e\n\u003ctd\u003e6.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrip depth \/ mouth\u003c\/th\u003e\n\u003ctd\u003e7.5 mm \/ 2.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSolid EPDM grip with metal insert, sponge rubber loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.08 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre: order the number of metres you need\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004263\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhy EPDM and sponge\u003c\/h3\u003e\u003cp\u003eThe 2 mm mouth and metal insert let the EPDM grip clamp thin sheet without glue, and the sponge loop compresses gently, so even a light panel closes onto it without bouncing back.\u003c\/p\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSlim self-grip top seal, cut to the number of metres ordered\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFitting tips\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the sheet.\u003c\/strong\u003e It must be 0.8–1.2 mm; thicker sheet will not go into the 2 mm mouth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeburr the edge.\u003c\/strong\u003e Thin sheet is often sharp; file it smooth so it does not cut the grip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush on.\u003c\/strong\u003e Start on a straight run and press on by hand, then tap home lightly with a soft mallet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorners.\u003c\/strong\u003e Ease it round curves without stretching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoin.\u003c\/strong\u003e Cut with side cutters (metal inside) and butt the ends.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the number of metres you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it fit 1.6 mm or thicker?\u003c\/strong\u003e\u003cbr\u003eNo. For 0.8–2 mm see the \u003ca href=\"\/products\/flexible-self-grip-rubber-top-seal-universal-fit-0-8mm-to-2mm-panels-per-metre\"\u003etop-bulb seal for 0.8–2 mm panels (DX87EP)\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow wide is it?\u003c\/strong\u003e\u003cbr\u003e6 mm overall, so it fits tight spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need glue?\u003c\/strong\u003e\u003cbr\u003eNot within the stated range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere are the sizes?\u003c\/strong\u003e\u003cbr\u003eSee the cross-section drawing in the gallery.\u003c\/p\u003e\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure it is the right profile? Send us a photo of your old seal before you order.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416127713659,"sku":"10004263","price":6.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/slim-self-grip-sponge-loop-seal-fitting-00180f77-c015-4286-b5c6-cfcf30815d9c.jpg?v=1794563378"},{"product_id":"flexible-self-grip-rubber-seal-universal-fit-1mm-to-2mm-panels-per-metre","title":"Flexible Self-Grip Top Tail Seal with Curved Sponge Tail – Fits 1mm to 2mm Panels (Universal) – EPDM \u0026 Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA push-on edge seal for thin panels, with a long sponge tail that rises from the grip and curves over to one side.\u003c\/strong\u003e The tail reaches 20 mm across, so it can bridge a wider gap than a bulb seal and wipe against a closing door, lid or hatch.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eSelf-grip edge trim with a curved sponge top tail (code DX89)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003ePanel or flange edges 1–2 mm thick (universal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e32.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTail reach\u003c\/th\u003e\n\u003ctd\u003e20.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrip depth \/ mouth\u003c\/th\u003e\n\u003ctd\u003e10.0 mm \/ 3.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSolid EPDM grip with metal insert, sponge rubber tail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.21 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre: order the number of metres you need\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004261\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhy EPDM and sponge\u003c\/h3\u003e\u003cp\u003eThe solid EPDM grip and metal insert hold the trim on thin sheet without glue. The sponge tail is soft and flexible, so it bends out of the way as a panel closes and presses back against it to seal.\u003c\/p\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSelf-grip curved-tail seal, cut to the number of metres ordered\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFitting tips\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the sheet.\u003c\/strong\u003e It should be 1–2 mm thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and deburr\u003c\/strong\u003e the edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint the tail.\u003c\/strong\u003e Decide which way the tail should curve before you start, so it sweeps towards the closing panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush and tap.\u003c\/strong\u003e Press on by hand from a straight run, then tap home with a soft mallet; ease round corners without stretching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoin.\u003c\/strong\u003e Cut with side cutters (metal inside) and butt the ends.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat panel thickness does it take?\u003c\/strong\u003e\u003cbr\u003eIt is sold for 1–2 mm panels. The supplier's specification text also quotes down to 0.8 mm, but we recommend it for 1–2 mm for a firm hold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the number of metres you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the tail solid or sponge?\u003c\/strong\u003e\u003cbr\u003eSponge rubber; the grip is solid EPDM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need glue?\u003c\/strong\u003e\u003cbr\u003eNot within the stated panel range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere are the sizes?\u003c\/strong\u003e\u003cbr\u003eSee the cross-section drawing in the gallery.\u003c\/p\u003e\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure it is the right profile? Send us a photo of your old seal before you order.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416127746427,"sku":"10004261","price":13.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/dx89-self-grip-curved-tail-seal-fitting-06b470d1-e5a6-4826-94ba-30bcae02fb86.jpg?v=1794607180"},{"product_id":"flexible-self-grip-rubber-top-seal-universal-fit-0-8mm-to-2mm-panels-per-metre","title":"Flexible Self-Grip Top Seal with Sponge Bulb – Fits 0.8mm to 2mm Panels (Universal) – EPDM \u0026 Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA push-on edge seal for thin 0.8–2 mm panels, with a tall hollow sponge bulb on top of a metal-cored EPDM grip.\u003c\/strong\u003e A good choice for light-gauge doors, lids, lockers and hatches on classic cars, caravans, buses, boats and rail vehicles.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eSelf-grip edge trim with a top sponge bulb (code DX87EP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003ePanel or flange edges 0.8–2 mm thick (universal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e18.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBulb\u003c\/th\u003e\n\u003ctd\u003eHollow sponge loop, 9.5 mm across including two small ears\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrip depth \/ mouth\u003c\/th\u003e\n\u003ctd\u003e9.0 mm \/ 3.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrip\u003c\/th\u003e\n\u003ctd\u003eSingle long internal fin to hold thin sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSolid EPDM grip with metal insert, sponge rubber bulb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.13 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre: order the number of metres you need\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhy EPDM and sponge\u003c\/h3\u003e\u003cp\u003eThe narrow 3.5 mm mouth and internal fin let the metal-cored EPDM grip hold thin sheet firmly without glue, and the sponge bulb gives a soft, compressible seal that a light panel can close onto easily.\u003c\/p\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSelf-grip top-bulb seal, cut to the number of metres ordered\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFitting tips\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the sheet.\u003c\/strong\u003e It should be 0.8–2 mm thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and deburr.\u003c\/strong\u003e Remove old trim and grease, and file off sharp burrs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush on.\u003c\/strong\u003e Start on a straight edge and press on by hand, then tap home with a soft mallet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorners.\u003c\/strong\u003e Ease the seal round curves without stretching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoin.\u003c\/strong\u003e Cut with side cutters (metal inside) and butt the ends tightly.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the number of metres you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it hold on 3 mm?\u003c\/strong\u003e\u003cbr\u003eNo. It is made for 0.8–2 mm. For 1.6–3 mm see our \u003ca href=\"\/products\/flexible-self-grip-rubber-seal-fits-1-6mm-to-3mm-panels-per-metre\"\u003etop-bulb seal for 1.6–3 mm panels (DX82)\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo you have a side-bulb version for the same panels?\u003c\/strong\u003e\u003cbr\u003eYes: the \u003ca href=\"\/products\/flexible-self-grip-rubber-side-seal-fits-0-8mm-to-2mm-panels-per-metre\"\u003eside-bulb seal for 0.8–2 mm panels (DX88)\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need glue?\u003c\/strong\u003e\u003cbr\u003eNot within the stated panel range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere are the sizes?\u003c\/strong\u003e\u003cbr\u003eSee the cross-section drawing in the gallery.\u003c\/p\u003e\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure it is the right profile? Send us a photo of your old seal before you order.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416127811963,"sku":"10004260","price":9.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/self-grip-top-bulb-seal-0-8-2mm-fitting-a9770edd-4259-4d02-8b15-694356065d38.jpg?v=1794563377"},{"product_id":"flexible-self-grip-rubber-seal-fits-jaguar-xj6-universal-1-6-3mm-per-metre","title":"Flexible Self-Grip Boot Seal with Offset Sponge Bulb – Fits Jaguar XJ6 \u0026 Universal 1.6-3mm Panels – EPDM \u0026 Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA push-on boot seal for 1.6–3 mm flanges: a small hollow sponge bulb sits on an angled solid arm, set off to one side of the metal-cored EPDM grip.\u003c\/strong\u003e It is listed as the boot seal for the Jaguar XJ6 (OE BBC4441) and also works as a universal door, window or lid seal.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eSelf-grip edge trim with an offset sponge bulb on an angled arm (code DX86)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar XJ6 boot seal (OE BBC4441); universal 1.6–3 mm panel edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e22.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrip depth \/ mouth\u003c\/th\u003e\n\u003ctd\u003e9.5 mm \/ 4.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBulb\u003c\/th\u003e\n\u003ctd\u003eSmall hollow sponge bulb with a sealing lip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSolid EPDM grip and arm with metal insert, sponge rubber bulb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.2 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre: order the number of metres you need\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004259\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhy EPDM and sponge\u003c\/h3\u003e\u003cp\u003eThe solid EPDM grip and its metal insert clamp the boot flange without glue. The angled arm puts the soft sponge bulb where the lid meets it, so the lid closes onto a compressible seal that keeps water out of the boot.\u003c\/p\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSelf-grip offset-bulb seal, cut to the number of metres ordered\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFitting tips\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the flange.\u003c\/strong\u003e It should measure 1.6–3 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean it.\u003c\/strong\u003e Remove the old seal, rust and grease; a boot flange often hides rust under the old rubber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet the bulb direction.\u003c\/strong\u003e Note which way the old bulb leaned and match it before pushing on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush and tap.\u003c\/strong\u003e Work from a straight run, press on by hand and tap home with a soft mallet; ease round the corners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoin.\u003c\/strong\u003e Cut a little long with side cutters (metal inside) and butt the ends at the lowest point.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs this the XJ6 boot seal?\u003c\/strong\u003e\u003cbr\u003eYes, it is listed for the XJ6 boot under OE BBC4441.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Measure round the boot opening and order that many metres.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need glue?\u003c\/strong\u003e\u003cbr\u003eNot on a sound 1.6–3 mm flange.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the bulb off to one side?\u003c\/strong\u003e\u003cbr\u003eThe angled arm places the bulb where the lid closes, rather than straight above the flange.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere are the sizes?\u003c\/strong\u003e\u003cbr\u003eSee the cross-section drawing in the gallery.\u003c\/p\u003e\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure it is the right profile? Send us a photo of your old seal before you order.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416127844731,"sku":"10004259","price":10.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/dx86-self-grip-offset-bulb-seal-product.jpg?v=1794599576"},{"product_id":"flexible-self-grip-rubber-seal-fits-jaguar-xj6-universal-per-metre","title":"Flexible Self-Grip Top Tail Seal (Solid Fin) – Fits Jaguar XJ6 Splash Guard \u0026 Universal 1.6-3mm Panels – Solid EPDM, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA push-on edge trim for 1.6–3 mm panels with a tall, slightly curved solid rubber fin standing up from the grip.\u003c\/strong\u003e It is listed as the splash guard seal for the Jaguar XJ6 (OE BD38520) and also works as a universal deflector or wiper strip on classic cars, caravans, buses, boats and rail vehicles.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eSelf-grip edge trim with a solid top fin (code DX83)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar XJ6 splash guard (OE BD38520); universal 1.6–3 mm panel edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e44.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrip depth \/ mouth\u003c\/th\u003e\n\u003ctd\u003e11.0 mm \/ 5.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSolid EPDM grip and fin with a metal insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSponge section\u003c\/th\u003e\n\u003ctd\u003eNone: the fin is solid rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.27 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre: order the number of metres you need\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004253\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhy solid EPDM\u003c\/h3\u003e\u003cp\u003eUnlike our sponge-bulb seals, this profile is solid EPDM throughout, so the fin keeps its shape and stands up to water, road spray and weather. The metal insert in the grip holds it on the panel edge without glue.\u003c\/p\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSelf-grip top-fin seal, cut to the number of metres ordered\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFitting tips\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the edge.\u003c\/strong\u003e The flange should be 1.6–3 mm thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean it.\u003c\/strong\u003e Remove old trim, rust scale and grease.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace the fin the right way.\u003c\/strong\u003e Decide which side the fin should lean before you start; the curve is built in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush and tap.\u003c\/strong\u003e Press on by hand from a straight section, then tap home with a soft mallet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish.\u003c\/strong\u003e Cut with side cutters (metal inside) and butt the ends.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs this the XJ6 splash guard seal?\u003c\/strong\u003e\u003cbr\u003eYes, it is listed for the XJ6 splash guard under OE BD38520.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there any sponge in it?\u003c\/strong\u003e\u003cbr\u003eNo. It is all solid EPDM with a metal insert in the grip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the number of metres you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I trim the fin?\u003c\/strong\u003e\u003cbr\u003eYes, it can be cut down with a sharp blade if you need a shorter lip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere are the sizes?\u003c\/strong\u003e\u003cbr\u003eSee the cross-section drawing in the gallery.\u003c\/p\u003e\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure it is the right profile? Send us a photo of your old seal before you order.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416127910267,"sku":"10004253","price":12.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/jaguar-xj6-splash-guard-seal-fitting-4fff3ea5-5195-46c4-94b6-ee2d6b60049b.jpg?v=1794563518"},{"product_id":"flexible-self-grip-rubber-seal-fits-1-6mm-to-3mm-panels-per-metre","title":"Flexible Self-Grip Top Seal with Sponge Bulb – Fits 1.6mm to 3mm Panels (Universal) – EPDM \u0026 Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA push-on edge seal for 1.6–3 mm panels, with a round hollow sponge bulb sitting centrally on top of a metal-cored EPDM grip.\u003c\/strong\u003e Use it on doors, boot lids, hatches and windows on classic cars, caravans, buses, boats and rail vehicles.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eSelf-grip edge trim with a central top sponge bulb (code DX82)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003ePanel or flange edges 1.6–3 mm thick (universal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e21.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBulb\u003c\/th\u003e\n\u003ctd\u003eHollow sponge, 12.0 mm across including two small sealing ears\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrip depth \/ mouth\u003c\/th\u003e\n\u003ctd\u003e10.5 mm \/ 5.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSolid EPDM grip with metal insert, sponge rubber bulb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.18 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre: order the number of metres you need\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10000434\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhy EPDM and sponge\u003c\/h3\u003e\u003cp\u003eThe solid EPDM grip with its metal insert clamps the panel edge without glue. The sponge bulb on top is soft enough to compress under a closing door or lid, so it seals without making the panel hard to shut.\u003c\/p\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSelf-grip top-bulb seal, cut to the number of metres ordered\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFitting tips\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure first.\u003c\/strong\u003e Check the flange is 1.6–3 mm thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the edge.\u003c\/strong\u003e Remove old trim, loose rust and grease.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush on.\u003c\/strong\u003e Start on a straight run, press on by hand, then tap home with a soft mallet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorners.\u003c\/strong\u003e Ease the seal round curves rather than stretching it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoin.\u003c\/strong\u003e Cut a little long with side cutters (metal inside) and butt the ends tightly.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. The price is for one metre; order the length you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does the bulb sit?\u003c\/strong\u003e\u003cbr\u003eCentrally on top of the grip, so it faces straight at the part that closes onto it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo you have a version with the seal to one side?\u003c\/strong\u003e\u003cbr\u003eYes. For 1.6–3 mm panels see the \u003ca href=\"\/products\/flexible-self-grip-rubber-side-seal-fits-morris-minor-universal-per-metre\"\u003eside-bulb seal (DX85)\u003c\/a\u003e, the \u003ca href=\"\/products\/flexible-self-grip-rubber-side-tail-seal-universal-1-6mm-to-3mm-panels-per-metre\"\u003eside-tail seal (DX73)\u003c\/a\u003e, the \u003ca href=\"\/products\/flexible-self-grip-rubber-top-tail-seal-fits-post-1988-mini-per-metre\"\u003ecurved top-tail seal (DX72)\u003c\/a\u003e and the \u003ca href=\"\/products\/flexible-self-grip-rubber-seal-fits-jaguar-xj6-universal-per-metre\"\u003esolid top-fin seal (DX83)\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need glue?\u003c\/strong\u003e\u003cbr\u003eNot on a 1.6–3 mm flange in good condition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere are the sizes?\u003c\/strong\u003e\u003cbr\u003eThe cross-section drawing in the gallery shows them in mm.\u003c\/p\u003e\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure it is the right profile? Send us a photo of your old seal before you order.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416127975803,"sku":"10000434","price":12.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/dx82-self-grip-top-bulb-seal-fitting-cf762846-75fc-4a95-a92c-1bca7052a12f.jpg?v=1794598737"},{"product_id":"flexible-self-grip-rubber-top-seal-5mm-panels-per-metre","title":"Flexible Self-Grip Top Seal with Sponge Bulb – Fits 5mm Panels (Universal) – EPDM \u0026 Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA push-on edge seal for 5 mm panels: a metal-cored EPDM grip clamps the flange, and a large hollow sponge bulb on top closes the gap.\u003c\/strong\u003e It suits door, window and hatch openings on classic cars, buses, caravans, boats and rail vehicles, and needs no glue on the right panel thickness.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eSelf-grip edge trim with a top sponge bulb (code DX79)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003ePanel or flange edges 5 mm thick (universal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e31.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBulb\u003c\/th\u003e\n\u003ctd\u003eHollow sponge, radius 8.5 mm, with a small sealing lip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrip depth \/ mouth\u003c\/th\u003e\n\u003ctd\u003e10.0 mm \/ 5.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSolid EPDM grip with metal insert, sponge rubber bulb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.17 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre: order the number of metres you need\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10000429\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhy EPDM and sponge\u003c\/h3\u003e\u003cp\u003eThe solid EPDM grip and its metal insert hold the trim on the panel edge without adhesive, while the soft sponge bulb compresses easily, so a door or lid closes on it without force and still seals against draughts, dust and water.\u003c\/p\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSelf-grip top-bulb seal, cut to the number of metres ordered\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFitting tips\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the panel.\u003c\/strong\u003e Measure the flange with callipers. This profile is made for 5 mm; a thinner edge will not hold it firmly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the edge.\u003c\/strong\u003e Remove old trim, loose rust and grease.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart straight.\u003c\/strong\u003e Begin on a straight run, push the grip on by hand, then tap it home with a soft mallet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork round corners.\u003c\/strong\u003e Ease it round curves without stretching it, or it will shrink back later.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish the join.\u003c\/strong\u003e Cut it a little long with side cutters (there is metal inside) and butt the ends tightly.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. The price shown is for one metre; order the number of metres you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it fit a thinner panel?\u003c\/strong\u003e\u003cbr\u003eIt is made for 5 mm edges. For 1.6–3 mm or 0.8–2 mm flanges choose one of our other self-grip profiles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need glue?\u003c\/strong\u003e\u003cbr\u003eNot on a 5 mm edge: the metal-cored grip holds it on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich way up does it go?\u003c\/strong\u003e\u003cbr\u003eThe grip goes over the panel edge and the sponge bulb sits on top, facing the part that closes onto it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I see the exact sizes?\u003c\/strong\u003e\u003cbr\u003eYes. The cross-section drawing in the gallery shows the key sizes in mm.\u003c\/p\u003e\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure it is the right profile? Send us a photo of your old seal or the panel edge before you order.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416128041339,"sku":"10000429","price":11.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10000429_render.png?v=1794526947"},{"product_id":"flexible-self-grip-rubber-seal-universal-fit-for-1mm-to-2mm-panels-per-metre","title":"Self-Grip Seal with Top Sponge Bulb – Fits Classic Mini Bonnet \u0026 More, 1-2 mm Panels – EPDM \u0026 Metal Insert, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA slim self-grip seal with a hollow sponge bulb on top, used as the bonnet seal on the Classic Mini and for many other door, window and hatch jobs.\u003c\/strong\u003e The metal-reinforced EPDM grip pushes onto a 1–2 mm flange with no glue. Cut as one continuous length to the metres you order.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUsed on\u003c\/th\u003e\n\u003ctd\u003eClassic Mini bonnet seal; doors, windows and hatches on cars, buses, caravans and boats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFlange edges 1–2 mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBulb\u003c\/th\u003e\n\u003ctd\u003eHollow sponge, 8.1 mm wide × 9.1 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrip depth\u003c\/th\u003e\n\u003ctd\u003e9.2 mm, 4.0 mm mouth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003eApprox. 18.3 mm (bulb plus grip)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM with metal insert, sponge rubber bulb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFixing\u003c\/th\u003e\n\u003ctd\u003ePush-on, no glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.16 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile code\u003c\/th\u003e\n\u003ctd\u003eDX77\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM with a metal insert\u003c\/h3\u003e\n\u003cp\u003eUnder-bonnet and outdoor seals see heat, sun and water. EPDM copes with all three and stays springy, so the bulb keeps cushioning and sealing the panel. The metal insert gives the slim grip a tight hold on thin metal and lets it follow the curve of a bonnet opening.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × continuous length of self-grip top-bulb seal, cut to the number of metres ordered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the run.\u003c\/strong\u003e Measure along the flange and add a little for trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the flange.\u003c\/strong\u003e It must be 1–2 mm thick, paint included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean it.\u003c\/strong\u003e Remove the old seal, loose rust and grease.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush it on.\u003c\/strong\u003e Start at one end, bulb facing the panel that closes onto it, and seat it with a soft-faced mallet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish and test.\u003c\/strong\u003e Ease round curves without stretching, cut the end square and close the panel to check contact.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order 2 and you receive one continuous 2 m length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the Classic Mini bonnet seal?\u003c\/strong\u003e\u003cbr\u003eYes, this profile is used as the bonnet seal on the Classic Mini.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it grip a 3 mm flange?\u003c\/strong\u003e\u003cbr\u003eNo. It is sized for 1–2 mm; for thicker flanges see our 1.6–3 mm top-bulb seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need glue?\u003c\/strong\u003e\u003cbr\u003eNo. The fins and metal core hold it on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut it?\u003c\/strong\u003e\u003cbr\u003eWith sharp side cutters or a fine-toothed hacksaw, because of the metal insert.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure which profile you need? Send us a photo and your flange thickness before ordering.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416128074107,"sku":"10000427","price":10.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10000427_dx77_seal.png?v=1794526629"},{"product_id":"flexible-self-grip-rubber-top-seal-fits-mg-triumph-stag-per-metre","title":"Self-Grip Boot Seal with Top Sponge Bulb – Fits MG \u0026 Triumph Stag, 1-2 mm Panels – EPDM \u0026 Metal Insert, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA compact self-grip boot seal with a hollow sponge bulb on top, used on MG and Triumph Stag boot openings.\u003c\/strong\u003e The metal-reinforced EPDM grip pushes onto a 1–2 mm flange with no glue. Cut as one continuous length to the metres you order.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUsed on\u003c\/th\u003e\n\u003ctd\u003eMG and Triumph Stag boot seal, plus other models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOE references\u003c\/th\u003e\n\u003ctd\u003eAHH7833 (MG), YKC68 (Triumph)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFlange edges 1–2 mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e20.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBulb\u003c\/th\u003e\n\u003ctd\u003eHollow sponge, R4.5 mm (9 mm across)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrip depth\u003c\/th\u003e\n\u003ctd\u003e10.0 mm, 3.2 mm mouth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM with metal insert, sponge rubber bulb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.16 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile code\u003c\/th\u003e\n\u003ctd\u003eDX76\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM with a metal insert\u003c\/h3\u003e\n\u003cp\u003eEPDM keeps its softness through years of sun, frost and rain, so the bulb carries on sealing the boot instead of flattening and cracking. The metal insert in the grip clamps the thin flange tightly and lets the seal follow the corners of the opening.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × continuous length of self-grip top-bulb boot seal, cut to the number of metres ordered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the opening.\u003c\/strong\u003e Run a tape round the boot flange and allow a little extra for the join.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the flange.\u003c\/strong\u003e It must be 1–2 mm thick, paint included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean it.\u003c\/strong\u003e Remove the old seal, loose rust and grease.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush it on.\u003c\/strong\u003e Start at the bottom centre, press on by hand and seat it with a soft-faced mallet, bulb upwards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoin and test.\u003c\/strong\u003e Ease round corners without stretching, butt the ends tight and close the lid to check the seal.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order 4 and you receive one continuous 4 m length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich MG does it fit?\u003c\/strong\u003e\u003cbr\u003eIt replaces MG part AHH7833. Check your parts list for that number, or send us a photo of the old seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it grip a 3 mm flange?\u003c\/strong\u003e\u003cbr\u003eNo. This one is for 1–2 mm. For thicker flanges see our 1.6–3 mm top-bulb seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need glue?\u003c\/strong\u003e\u003cbr\u003eNo. The fins and metal core hold it on the flange.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut it?\u003c\/strong\u003e\u003cbr\u003eWith sharp side cutters or a fine-toothed hacksaw, because of the metal insert.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right seal for your car, contact us with a photo before ordering.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416128139643,"sku":"10004246","price":9.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/mg-triumph-stag-self-grip-boot-seal-fitting-91d53fa8-35d2-4207-9a4d-6e22a1318534.jpg?v=1794563987"},{"product_id":"flexible-self-grip-rubber-top-tail-seal-fits-post-1988-mini-per-metre","title":"Self-Grip Top Tail Boot Seal – Fits Mini (Post-1988), 1.6-3 mm Panels – Solid EPDM \u0026 Metal Insert, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA self-grip boot seal with a curved solid-rubber top tail, used on post-1988 Minis where the seal fits on the body flange rather than the boot lid.\u003c\/strong\u003e The metal-reinforced EPDM grip pushes onto a 1.6–3 mm flange and the tail curls over to meet the lid. Cut as one continuous length to the metres you order.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUsed on\u003c\/th\u003e\n\u003ctd\u003eClassic Mini, post-1988 (boot seal on the body)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOE reference\u003c\/th\u003e\n\u003ctd\u003eCKE10018 (Mini)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFlange edges 1.6–3 mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e26.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTail reach\u003c\/th\u003e\n\u003ctd\u003e10.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrip depth\u003c\/th\u003e\n\u003ctd\u003e10.0 mm, 5.0 mm mouth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSolid EPDM with metal insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.21 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile code\u003c\/th\u003e\n\u003ctd\u003eDX72\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM with a metal insert\u003c\/h3\u003e\n\u003cp\u003eEPDM keeps its shape and flexibility in sun, frost and rain, so the curved tail keeps springing back against the lid instead of taking a set. The metal insert gives the grip a firm hold on the flange and lets the seal be bent round the corners of the boot opening.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × continuous length of self-grip top-tail seal, cut to the number of metres ordered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed a different shape? We also sell the \u003ca href=\"\/products\/flexible-self-grip-rubber-side-tail-seal-universal-1-6mm-to-3mm-panels-per-metre\"\u003eself-grip side-tail seal for 1.6–3 mm panels\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote the old seal.\u003c\/strong\u003e Before removing it, check which way the tail curls so the new one goes on the same way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the flange.\u003c\/strong\u003e Remove the old seal, loose rust and grease; the flange must be 1.6–3 mm thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush it on.\u003c\/strong\u003e Start at the bottom centre of the opening, press on by hand and seat it with a soft-faced mallet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase round corners.\u003c\/strong\u003e Work round the corners slowly without stretching the seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoin and test.\u003c\/strong\u003e Cut slightly long, butt the ends tight and close the lid to check the tail meets it evenly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order 4 and you receive one continuous 4 m length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it go on the boot lid or the body?\u003c\/strong\u003e\u003cbr\u003eOn the body flange, for post-1988 Minis.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the tail sponge?\u003c\/strong\u003e\u003cbr\u003eNo. The tail is solid EPDM, which is why it holds its curved shape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit an earlier Mini?\u003c\/strong\u003e\u003cbr\u003eIt is listed for post-1988 cars. For earlier Minis compare the profile drawing with your old seal or send us a photo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need glue?\u003c\/strong\u003e\u003cbr\u003eNo. The fins and metal core hold it on a 1.6–3 mm flange.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right seal for your car, contact us with a photo before ordering.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416128237947,"sku":"10004245","price":11.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/mini-self-grip-top-tail-boot-seal-fitting-112f8168-cbc1-4712-bc89-e7b6f6887e46.jpg?v=1794564033"},{"product_id":"flexible-self-grip-rubber-seal-fits-land-rover-90-110-more-per-metre","title":"Self-Grip Boot Seal with Top Sponge Bulb – Fits MG, Mini, Land Rover \u0026 Triumph Spitfire\/GT6 (1.6-3 mm Panels) – EPDM \u0026 Metal Insert, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA self-grip boot and door seal with a large hollow sponge bulb on top of a metal-reinforced EPDM grip, for 1.6–3 mm flanges.\u003c\/strong\u003e It is the profile used as a boot seal on many MG, Mini, Land Rover and Triumph Spitfire \/ GT6 models, and pushes on with no glue. Cut as one continuous length to the metres you order.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUsed on\u003c\/th\u003e\n\u003ctd\u003eMG, Mini, Land Rover, Triumph Spitfire and GT6 (boot seal) and many other uses\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOE references\u003c\/th\u003e\n\u003ctd\u003eHZA5386 \/ CHA797 (MG)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFlange edges 1.6–3 mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e30.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBulb\u003c\/th\u003e\n\u003ctd\u003eHollow sponge, 15 mm across (R7.5)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrip depth\u003c\/th\u003e\n\u003ctd\u003e11.5 mm, 5.0 mm mouth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM with metal insert, sponge rubber bulb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.22 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile code\u003c\/th\u003e\n\u003ctd\u003eDX70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM with a metal insert\u003c\/h3\u003e\n\u003cp\u003eEPDM shrugs off sun, ozone and rain, so the bulb stays soft and keeps sealing season after season. The metal insert inside the grip clamps the flange firmly and lets the seal follow the curves of a boot opening, while the hollow sponge bulb squashes evenly as the lid closes.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × continuous length of self-grip top-bulb seal, cut to the number of metres ordered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the opening.\u003c\/strong\u003e Run a tape round the flange and add a little for the join.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the flange.\u003c\/strong\u003e It must be 1.6–3 mm thick, paint included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean it.\u003c\/strong\u003e Remove the old seal, loose rust and grease.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush it on.\u003c\/strong\u003e Start at the bottom centre, press on by hand and seat it with a soft-faced mallet, bulb facing the lid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoin neatly.\u003c\/strong\u003e Ease it round corners without stretching, cut slightly long and butt the ends tight.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order 4 and you receive one continuous 4 m length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Land Rover models does it suit?\u003c\/strong\u003e\u003cbr\u003eOur supplier lists it for Land Rover without naming specific models, so check the profile drawing against your old seal or send us a photo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need glue?\u003c\/strong\u003e\u003cbr\u003eNo. The fins and metal core hold it on a 1.6–3 mm flange.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bulb solid?\u003c\/strong\u003e\u003cbr\u003eNo, it is hollow sponge rubber, so it compresses easily and the lid closes without force.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut it?\u003c\/strong\u003e\u003cbr\u003eUse sharp side cutters or a fine-toothed hacksaw for the metal insert.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right profile for your car, contact us with a photo before ordering.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416128270715,"sku":"10000421","price":10.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10000421_render_3d.png?v=1794526734"}],"url":"https:\/\/industrial-polymers.co.uk\/collections\/flexible-self-grip-rubber-with-top-seal.oembed","provider":"Industrial-polymers ","version":"1.0","type":"link"}