{"title":"Jaguar XJ6","description":null,"products":[{"product_id":"left-hand-lower-door-seal-fits-jaguar-xj6-xj12-series-2-per-metre","title":"Left Hand Lower Door Seal – Fits Jaguar XJ6 \u0026 XJ12 Series 2 Coupe – Black EPDM – Each","description":"\u003cp\u003e\u003cstrong\u003eA left hand lower door seal for the two-door Jaguar XJ6 and XJ12 Series 2 Coupe, made in black EPDM with a moulded corner.\u003c\/strong\u003e It is sold each: one complete seal, not a length cut from a roll.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar XJ6 \u0026amp; XJ12 Series 2 Coupe (two-door)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eLower door seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSide\u003c\/th\u003e\n\u003ctd\u003eLeft hand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eJM6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eForm\u003c\/th\u003e\n\u003ctd\u003eOne formed seal with a moulded corner and open ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eAftermarket reproduction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.52 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003eEach (one seal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10005070\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\n\u003cp\u003eOriginal door rubbers hardened and cracked with age. EPDM keeps its flexibility through years of sunlight, frost and rain, so the seal keeps closing the gap at the bottom of the door.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 × left hand lower door seal for the XJ6 \/ XJ12 Series 2 Coupe\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eThe matching right hand seal (supplier code JM7) is no longer made by our supplier.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompare first.\u003c\/strong\u003e Lay the new seal beside your old one and check the corner and the length of each run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip the old seal.\u003c\/strong\u003e Remove the old rubber and any old adhesive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the metal.\u003c\/strong\u003e Clean the door, treat any rust and let it dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart at the corner.\u003c\/strong\u003e Locate the moulded corner first, then work out along each run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the door.\u003c\/strong\u003e Close it gently and check the seal meets evenly along its length.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this sold by the metre?\u003c\/strong\u003e\u003cbr\u003eNo. It is one complete seal with a moulded corner, sold each.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the four-door saloon?\u003c\/strong\u003e\u003cbr\u003eNo. It is listed for the Series 2 Coupe (two-door) only. Jaguar specialists Moss Motors and SNG Barratt also list this lower door seal for the coupe models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich OEM number is it?\u003c\/strong\u003e\u003cbr\u003eOur supplier cross-references it to BD44120. Note that Moss Motors and Jagdaim list BD44120 as the right hand seal, and SNG Barratt lists BD44121 as left hand, so compare it with your old seal by shape and side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I get the right hand seal?\u003c\/strong\u003e\u003cbr\u003eNot from us at present; our supplier no longer makes the right hand version (JM7).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need adhesive?\u003c\/strong\u003e\u003cbr\u003eCheck how your old seal was held before stripping it, and refit the new one the same way.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right seal for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416109232507,"sku":"10005070","price":25.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/jm6_gen_closeup.jpg?v=1794507058"},{"product_id":"windscreen-rubber-seal-fits-jaguar-xj6-xj12","title":"Front Windscreen Rubber BD48848 – Fits Jaguar XJ6 \u0026 XJ12 – Black EPDM, Takes LF1B or PT02 Filler – Each","description":"\u003cp\u003e\u003cstrong\u003eA replacement front windscreen rubber for the Jaguar XJ6 and XJ12, made in black EPDM as a reproduction of Jaguar part BD48848.\u003c\/strong\u003e It holds the screen in the body aperture and is locked tight with a separate filler strip, either LF1B in black or PT02 in chrome finish.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar XJ6 and Jaguar XJ12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eFront windscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eGlazing rubber with a filler-strip slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLocking method\u003c\/th\u003e\n\u003ctd\u003eLF1B black or PT02 chrome filler strip (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003eBD48848\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eESJ117\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 2.01 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003eEach (one windscreen rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eIP-CS-15435171987835\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\n\u003cp\u003eEPDM is a synthetic rubber widely used for glazing seals because it resists sunlight, ozone and weathering, so the lips keep their grip on the glass and the body.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × front windscreen rubber, black EPDM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAlso needed (sold separately), choose one filler strip:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/filler-locking-strip-fits-jaguar-land-rover-black-per-metre\"\u003eLF1B black filler \/ locking strip\u003c\/a\u003e, sold per metre\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/filler-strip-chrome-fits-jaguar-mini-windscreen-surrounds-per-metre\"\u003ePT02 chrome-finish filler \/ locking strip\u003c\/a\u003e, sold per metre\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/weather-glazing-strip-fitting-tool-fits-rubber-filler-strips\"\u003eGlazing strip fitting tool\u003c\/a\u003e: makes feeding the filler strip easier\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarm it.\u003c\/strong\u003e Let the rubber reach room temperature before fitting; cold rubber is stiff round the corners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber onto glass.\u003c\/strong\u003e Lay the glass on a soft, clean surface and work the rubber on evenly all the way round.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCord the flange channel.\u003c\/strong\u003e Lay a strong cord in the body-flange channel with the ends overlapping at the bottom centre.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePull it in.\u003c\/strong\u003e Lubricate with soapy water, offer the screen up and pull the cord from inside while a helper presses gently from outside.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock it.\u003c\/strong\u003e Feed your chosen filler strip into the slot with a fitting tool and trim the joint neatly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eWindscreen glass is heavy and fragile, so always work with a helper.\u003c\/p\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the filler strip included?\u003c\/strong\u003e\u003cbr\u003eNo. Choose LF1B black or PT02 chrome-finish filler strip, both sold per metre.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit both the XJ6 and the XJ12?\u003c\/strong\u003e\u003cbr\u003eYes. It is listed for the front windscreen on both models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it for the rear screen?\u003c\/strong\u003e\u003cbr\u003eNo. This is the front windscreen rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I reuse my old filler strip?\u003c\/strong\u003e\u003cbr\u003eIt is not recommended. Old strip is usually hard and shrunken, and fresh strip is what clamps the new rubber tight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a Jaguar factory part?\u003c\/strong\u003e\u003cbr\u003eNo. It is an aftermarket reproduction made to replace Jaguar part BD48848.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right rubber for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416110608763,"sku":"IP-CS-15435171987835","price":114.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/esj117_flatlay.jpg?v=1794505476"},{"product_id":"rear-windscreen-rubber-seal-fits-jaguar-xj6-xj12-series-1-2","title":"Rear Screen Rubber BD38361 – Fits Jaguar XJ6 \u0026 XJ12 Series 1 \u0026 2 Saloon (1968-1979) – Black EPDM – Each","description":"\u003cp\u003e\u003cstrong\u003eThe rear screen rubber for Jaguar XJ6 and XJ12 Series 1 and 2 saloons (1968-1979), OEM BD38361, moulded in black EPDM.\u003c\/strong\u003e It holds the rear glass in the body opening and is locked tight with a separate filler strip.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar XJ6 and XJ12 Series 1 and 2 saloon, 1968-1979\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eXJ-C (two-door coupe)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eRear screen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eFiller strip: LF1B black or PT02 chrome (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003eBD38361\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.38 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003e1 rubber (each)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCode \/ SKU\u003c\/th\u003e\n\u003ctd\u003eESJ116B\/L \/ 10001041\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\n\u003cp\u003eA tired rear screen rubber is a common cause of water in the boot and rear footwells. EPDM stays flexible in UV, ozone and frost, so it keeps sealing round the glass for years.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 x rear screen rubber for the XJ6 \/ XJ12 Series 1 and 2 saloon\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAlso needed (sold separately):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/filler-locking-strip-fits-jaguar-land-rover-black-per-metre\"\u003eLF1B black filler \/ locking strip\u003c\/a\u003e, or\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/filler-strip-chrome-fits-jaguar-mini-windscreen-surrounds-per-metre\"\u003ePT02 chrome filler strip\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/windscreen-rubber-seal-fits-jaguar-xj6-xj12\"\u003eXJ6 and XJ12 front windscreen rubber\u003c\/a\u003e is a separate part.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarm it up.\u003c\/strong\u003e Leave the rubber somewhere warm for an hour so it is supple.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the opening.\u003c\/strong\u003e Clean the flange, treat any rust and dress sharp edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber onto glass.\u003c\/strong\u003e Fit the rubber round the glass and lay a strong cord in the flange channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePull the cord.\u003c\/strong\u003e Offer the glass up; a helper presses gently outside while you pull the cord from inside so the lip rolls over the flange.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock it.\u003c\/strong\u003e Feed the filler strip into its groove with a fitting tool, then check both lips sit flat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the XJ-C coupe?\u003c\/strong\u003e\u003cbr\u003eNo. The XJ-C has a different, narrower rear screen and needs a different rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit Series 3?\u003c\/strong\u003e\u003cbr\u003eIt is listed for Series 1 and 2 saloons only. For a Series 3, ask us before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the filler strip included?\u003c\/strong\u003e\u003cbr\u003eNo. Order LF1B (black) or PT02 (chrome) separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it one piece?\u003c\/strong\u003e\u003cbr\u003eYes, it is a complete rubber for one rear screen.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I paint it?\u003c\/strong\u003e\u003cbr\u003eNo. Leave EPDM unpainted and clean it with mild soapy water.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right rubber, contact us before ordering.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416121225595,"sku":"10001041","price":134.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10001041_2.jpg?v=1789260424"},{"product_id":"windscreen-insert-strip-fits-jaguar-xj6-xj12-per-metre","title":"Outer Windscreen Insert Strip BBC5889 – Fits Jaguar XJ6 \u0026 XJ12 Series 3 (Front \u0026 Rear Screen) – Black EPDM – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eThe outer screen insert strip for the Jaguar XJ6 and XJ12 Series 3, OEM BBC5889, in black EPDM.\u003c\/strong\u003e Its stem pushes into the gap around the outside of the screen and the domed 9.25 mm cap gives a neat, weather-tight finish. The same strip is used on the front and rear screens.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar XJ6 and XJ12 Series 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eOuter insert, front and rear screen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSection\u003c\/th\u003e\n\u003ctd\u003eT-section: 9.25 mm cap, 12.5 mm overall height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStem\u003c\/th\u003e\n\u003ctd\u003e2.5 mm thick, 10 mm deep, with a small side barb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003eBBC5889\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.07 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCode \/ SKU\u003c\/th\u003e\n\u003ctd\u003eWT07\/J \/ 10006728\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\n\u003cp\u003eThe insert sits fully exposed to sun and rain. EPDM resists UV and ozone, so it does not shrink back from the corners or crack the way old inserts do.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOuter screen insert strip, cut as one continuous length to the number of metres ordered\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eThe inner screen insert (supplier code WT08\/J) is a different part and is not included.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure\u003c\/strong\u003e round the screen and allow a little extra for the joint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the gap\u003c\/strong\u003e between the glass and the body so the stem can go fully home.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress it in\u003c\/strong\u003e by hand, starting where the old joint was, without stretching the strip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase it round the corners\u003c\/strong\u003e so the cap lies flat and does not ripple.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and join.\u003c\/strong\u003e Cut square and butt the ends tightly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit Series 1 or 2?\u003c\/strong\u003e\u003cbr\u003eBBC5889 is listed for the Series 3 cars. For a Series 1 or 2, check your old trim against our drawing or ask us first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFront or rear?\u003c\/strong\u003e\u003cbr\u003eBoth. The same insert is used round the front and rear screens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I need?\u003c\/strong\u003e\u003cbr\u003eMeasure round each screen you are doing and order the total in whole metres.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the inner insert?\u003c\/strong\u003e\u003cbr\u003eNo. This is the outer insert; the inner one is a different section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it one piece?\u003c\/strong\u003e\u003cbr\u003eYes, several metres are supplied as one continuous length.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right strip, send us a photo before ordering.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416121323899,"sku":"10006728","price":1.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10006728_1.jpg?v=1789260440"},{"product_id":"outer-door-glass-seal-fits-jaguar-xj6-xj12-xjs-per-metre","title":"Outer Door Glass Seal (Flocked Waist Seal) BD46440 – Fits Jaguar XJ6, XJ12 \u0026 XJS – Black EPDM – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eThe flocked outer door glass seal (waist seal) for the Jaguar XJ6, XJ12 and XJS, OEM BD46440, in black EPDM.\u003c\/strong\u003e It runs along the outside of the door top, and its flocked lip wipes the glass as the window winds down and helps keep rain out of the door.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar XJ6, XJ12 and XJS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eOuter door glass, along the door top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSection\u003c\/th\u003e\n\u003ctd\u003e7.5 mm flat lead-in, curved blade approx. 18 mm, 6 mm foot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWiping lip\u003c\/th\u003e\n\u003ctd\u003eFlocked, approx. 1.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM rubber with flock coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003eBD46440\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.07 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCode \/ SKU\u003c\/th\u003e\n\u003ctd\u003eJW1 \/ 10005077\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM with flock\u003c\/h3\u003e\n\u003cp\u003eThe EPDM body stays flexible in sun and frost, so the seal keeps pressing on the glass. The flocked face lets the window slide past without squeaking or scratching and sheds water better than bare rubber.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eOuter door glass seal, cut as one continuous length to the number of metres ordered\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower the window\u003c\/strong\u003e fully so the door top is clear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the old seal.\u003c\/strong\u003e Ease it out and note how it was held and which way the lip faced.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the door top.\u003c\/strong\u003e Clear dirt and old rubber so the new seal sits flat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit the new seal\u003c\/strong\u003e with the flocked lip against the glass, working from one end without stretching it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and test.\u003c\/strong\u003e Cut it square to length, then wind the window up and down to check it wipes evenly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I need?\u003c\/strong\u003e\u003cbr\u003eMeasure the door top on each door you are doing and order the total in whole metres.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the XJS?\u003c\/strong\u003e\u003cbr\u003eYes. BD46440 is listed for the XJ6, XJ12 and XJS. Some later XJS doors use a variant of this seal, so compare your old one with our drawing first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich side faces the glass?\u003c\/strong\u003e\u003cbr\u003eThe flocked lip goes against the glass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the inner or outer seal?\u003c\/strong\u003e\u003cbr\u003eThis is the outer seal, on the outside of the glass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it one piece?\u003c\/strong\u003e\u003cbr\u003eYes, several metres are supplied as one continuous length.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right seal, send us a photo of a cut end of your old one.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416121356667,"sku":"10005077","price":13.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10005077_1.jpg?v=1789260444"},{"product_id":"windscreen-trim-seal-fits-jaguar-xj6-series-iii-per-metre","title":"Inner Windscreen Trim, 9.5 x 11 mm – Fits Jaguar XJ6 Series III – EPDM, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA black EPDM inner front windscreen trim for the Jaguar XJ6 Series III (OE BD 1977), sold by the metre.\u003c\/strong\u003e It pushes onto the edge round the inside of the screen aperture to give a neat finished surround.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar XJ6 Series III\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eInner front windscreen trim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eAsymmetric U channel with gripping serrations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003e9.5 mm wide × 11 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSlot\u003c\/th\u003e\n\u003ctd\u003e2 mm wide, 9.2 mm deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOE part number\u003c\/th\u003e\n\u003ctd\u003eBD 1977\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eIRS1700EPJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.09 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, as one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10001555\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\n\u003cp\u003eEPDM keeps its colour and flexibility in sunlight behind the glass, so the trim does not go brittle, shrink back from the corners or turn grey.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eBlack EPDM screen trim, cut to the number of metres you order and supplied in one length\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure.\u003c\/strong\u003e Run a tape round the edge, add a little for trimming and round up to whole metres.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the edge.\u003c\/strong\u003e Remove old trim, adhesive and grease.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush it on.\u003c\/strong\u003e Start on a straight section and press the slot over the edge by hand; a little soapy water helps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase round corners.\u003c\/strong\u003e Work it round curves without stretching so it does not shrink back.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoin neatly.\u003c\/strong\u003e Cut square with a sharp knife and butt the ends tight.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. The quantity you order is the number of metres, supplied as one length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat edge does it fit?\u003c\/strong\u003e\u003cbr\u003eThe slot is 2 mm wide and 9.2 mm deep, so it suits edges of about 2 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere are the sizes from?\u003c\/strong\u003e\u003cbr\u003eFrom the published profile specification for IRS1700EPJ, shown in our drawing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it go round corners?\u003c\/strong\u003e\u003cbr\u003eIt follows the screen aperture curves; ease it round rather than stretching it.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right trim for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416121520507,"sku":"10001555","price":9.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10001555_1.jpg?v=1789260470"},{"product_id":"sponge-rubber-section-fits-jaguar-xj6-series-2-coupe-per-metre","title":"Upper Door Seal – Fits Jaguar XJ6 \u0026 XJ12 Series 2 Coupe – Black EPDM – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eThe upper door seal section for the two-door Jaguar XJ6 and XJ12 Series 2 Coupe, made in black EPDM to the BD44122 pattern.\u003c\/strong\u003e It runs along the top of the door, where the door and window close against it, so a hardened original lets in wind noise and water.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar XJ6 Coupe and XJ12 Coupe (Series 2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eUpper door seal; the same profile is used on both doors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eTall stem with a rounded upper bead, open channel, angled side tail and a dense foot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChannel aperture\u003c\/th\u003e\n\u003ctd\u003eApprox. 5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize (profile drawing)\u003c\/th\u003e\n\u003ctd\u003e33 mm high × 24 mm wide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalogue size\u003c\/th\u003e\n\u003ctd\u003eQuoted by the supplier as approx. 30 mm wide × 33 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003eBD44122\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.32 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre – one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU \/ code\u003c\/th\u003e\n\u003ctd\u003e10006631 \/ SRS119\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\n\u003cp\u003eEPDM keeps its flexibility for years in sunlight, ozone and rain, where older rubber goes hard and loses its shape. A seal that stays soft keeps pressing against the door top and glass, which is what keeps wind and water out.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThe number of metres you order, as one continuous length of SRS119 section\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eAdhesive is not included. You need one run per door, so measure both doors before ordering.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the old seal.\u003c\/strong\u003e Measure each door's run before removing the old seal and add about 100 mm for trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote the orientation.\u003c\/strong\u003e Photograph which way the tail faces before you strip the old one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the channel.\u003c\/strong\u003e Remove old rubber and glue and degrease the mounting face.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit without stretching.\u003c\/strong\u003e Seat the foot along the full length and ease it round the curve; stretched EPDM shrinks back and opens gaps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjust and test.\u003c\/strong\u003e Wind the glass up, close the door gently and check the contact line along the top.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the XJ12 Coupe too?\u003c\/strong\u003e\u003cbr\u003eYes. Jaguar specialists list BD44122 for both the XJ6 and XJ12 Coupe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit the four-door saloon?\u003c\/strong\u003e\u003cbr\u003eNo. This section is listed for the two-door Coupe only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLeft or right door?\u003c\/strong\u003e\u003cbr\u003eThe profile is the same for both doors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the metres you need and we cut one continuous length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do the sizes differ?\u003c\/strong\u003e\u003cbr\u003eThe supplier's profile drawing gives 24 mm across the base and tail, while their catalogue text says approx. 30 mm wide; both agree on the 33 mm height. Compare with your old seal if unsure.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right profile for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416124273019,"sku":"10006631","price":25.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10006631_section.png?v=1794491729"},{"product_id":"overrider-beading-set-fits-jaguar-e-type-420-saloon-per-metre","title":"Overrider Rubber Beading – Fits Jaguar E-Type, XK140\/150, Mk1\/2\/7\/9\/10, 420, S-Type, XJ6\/XJ12 \u0026 Daimler 2.5, Sovereign – Solid Black Rubber – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eSolid black rubber beading that sits between the bumper and the chrome overrider on classic Jaguars and Daimlers.\u003c\/strong\u003e It beds the overrider down on the bumper, keeps metal off metal and gives a neat black line round the overrider. Cut as one length in the metres you order.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar E-Type, XK140, XK150, Mk1, Mk2, Mk7, Mk9, Mk10, 420 Saloon, S-Type, XJ6, XJ12; Daimler 2.5 and Sovereign\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eBetween bumper and overrider\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eFlat base, rounded bead and upright lip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e11.5 mm wide x 5 mm high, bead 3.25 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSolid rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.05 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eORP5\/J\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy solid rubber\u003c\/h3\u003e\n\u003cp\u003eThe beading is clamped every time the overrider bolts are tightened, so it needs to be firm enough not to squeeze out yet soft enough to take up small gaps. A solid rubber section does both and stops the chrome rubbing through the paint.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 length of overrider beading, in the number of metres ordered\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eOverriders, bolts and bumpers are not included.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the overrider.\u003c\/strong\u003e Undo the bolts and lift it clear of the bumper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean both faces.\u003c\/strong\u003e Clean the bumper and the back of the overrider so the beading sits flat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLay the beading.\u003c\/strong\u003e Flat base on the bumper, then offer the overrider up onto the bead and lip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim.\u003c\/strong\u003e Cut slightly long and trim the ends square once the overrider is loosely bolted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTighten evenly.\u003c\/strong\u003e Snug the bolts down evenly so the beading compresses all the way round.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a set or per metre?\u003c\/strong\u003e\u003cbr\u003eIt is sold per metre. Order the total length for all the overriders you are refitting, in whole metres.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I need?\u003c\/strong\u003e\u003cbr\u003eMeasure round the contact edge of each overrider and add a little for trimming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need glue?\u003c\/strong\u003e\u003cbr\u003eNo. It is held by clamping between the bumper and the overrider.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my XK150 or Mk2?\u003c\/strong\u003e\u003cbr\u003eYes, both are on the fitment list above. If your car has non-standard bumpers, compare your old beading with our drawing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut it?\u003c\/strong\u003e\u003cbr\u003eYes, a sharp knife gives a clean square end.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure it matches? Send us a photo of your old beading before you order.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416125419899,"sku":"IP-CS-15435185160571","price":2.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10005507_flatlay.jpg?v=1794492327"},{"product_id":"flexible-self-grip-rubber-seal-fits-jaguar-xj6-universal-1-6-3mm-per-metre","title":"Flexible Self-Grip Boot Seal with Offset Sponge Bulb – Fits Jaguar XJ6 \u0026 Universal 1.6-3mm Panels – EPDM \u0026 Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA push-on boot seal for 1.6–3 mm flanges: a small hollow sponge bulb sits on an angled solid arm, set off to one side of the metal-cored EPDM grip.\u003c\/strong\u003e It is listed as the boot seal for the Jaguar XJ6 (OE BBC4441) and also works as a universal door, window or lid seal.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eSelf-grip edge trim with an offset sponge bulb on an angled arm (code DX86)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar XJ6 boot seal (OE BBC4441); universal 1.6–3 mm panel edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e22.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrip depth \/ mouth\u003c\/th\u003e\n\u003ctd\u003e9.5 mm \/ 4.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBulb\u003c\/th\u003e\n\u003ctd\u003eSmall hollow sponge bulb with a sealing lip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSolid EPDM grip and arm with metal insert, sponge rubber bulb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.2 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre: order the number of metres you need\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004259\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhy EPDM and sponge\u003c\/h3\u003e\u003cp\u003eThe solid EPDM grip and its metal insert clamp the boot flange without glue. The angled arm puts the soft sponge bulb where the lid meets it, so the lid closes onto a compressible seal that keeps water out of the boot.\u003c\/p\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSelf-grip offset-bulb seal, cut to the number of metres ordered\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFitting tips\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the flange.\u003c\/strong\u003e It should measure 1.6–3 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean it.\u003c\/strong\u003e Remove the old seal, rust and grease; a boot flange often hides rust under the old rubber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet the bulb direction.\u003c\/strong\u003e Note which way the old bulb leaned and match it before pushing on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush and tap.\u003c\/strong\u003e Work from a straight run, press on by hand and tap home with a soft mallet; ease round the corners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoin.\u003c\/strong\u003e Cut a little long with side cutters (metal inside) and butt the ends at the lowest point.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs this the XJ6 boot seal?\u003c\/strong\u003e\u003cbr\u003eYes, it is listed for the XJ6 boot under OE BBC4441.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Measure round the boot opening and order that many metres.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need glue?\u003c\/strong\u003e\u003cbr\u003eNot on a sound 1.6–3 mm flange.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the bulb off to one side?\u003c\/strong\u003e\u003cbr\u003eThe angled arm places the bulb where the lid closes, rather than straight above the flange.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere are the sizes?\u003c\/strong\u003e\u003cbr\u003eSee the cross-section drawing in the gallery.\u003c\/p\u003e\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure it is the right profile? Send us a photo of your old seal before you order.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416127844731,"sku":"10004259","price":10.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10004259_section.png?v=1794489771"},{"product_id":"flexible-self-grip-rubber-seal-fits-jaguar-xj6-universal-per-metre","title":"Flexible Self-Grip Top Tail Seal (Solid Fin) – Fits Jaguar XJ6 Splash Guard \u0026 Universal 1.6-3mm Panels – Solid EPDM, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA push-on edge trim for 1.6–3 mm panels with a tall, slightly curved solid rubber fin standing up from the grip.\u003c\/strong\u003e It is listed as the splash guard seal for the Jaguar XJ6 (OE BD38520) and also works as a universal deflector or wiper strip on classic cars, caravans, buses, boats and rail vehicles.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eSelf-grip edge trim with a solid top fin (code DX83)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar XJ6 splash guard (OE BD38520); universal 1.6–3 mm panel edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e44.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrip depth \/ mouth\u003c\/th\u003e\n\u003ctd\u003e11.0 mm \/ 5.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSolid EPDM grip and fin with a metal insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSponge section\u003c\/th\u003e\n\u003ctd\u003eNone: the fin is solid rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.27 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre: order the number of metres you need\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004253\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhy solid EPDM\u003c\/h3\u003e\u003cp\u003eUnlike our sponge-bulb seals, this profile is solid EPDM throughout, so the fin keeps its shape and stands up to water, road spray and weather. The metal insert in the grip holds it on the panel edge without glue.\u003c\/p\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSelf-grip top-fin seal, cut to the number of metres ordered\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFitting tips\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the edge.\u003c\/strong\u003e The flange should be 1.6–3 mm thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean it.\u003c\/strong\u003e Remove old trim, rust scale and grease.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace the fin the right way.\u003c\/strong\u003e Decide which side the fin should lean before you start; the curve is built in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush and tap.\u003c\/strong\u003e Press on by hand from a straight section, then tap home with a soft mallet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish.\u003c\/strong\u003e Cut with side cutters (metal inside) and butt the ends.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs this the XJ6 splash guard seal?\u003c\/strong\u003e\u003cbr\u003eYes, it is listed for the XJ6 splash guard under OE BD38520.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there any sponge in it?\u003c\/strong\u003e\u003cbr\u003eNo. It is all solid EPDM with a metal insert in the grip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the number of metres you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I trim the fin?\u003c\/strong\u003e\u003cbr\u003eYes, it can be cut down with a sharp blade if you need a shorter lip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere are the sizes?\u003c\/strong\u003e\u003cbr\u003eSee the cross-section drawing in the gallery.\u003c\/p\u003e\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure it is the right profile? Send us a photo of your old seal before you order.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416127910267,"sku":"10004253","price":12.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10004253_1.jpg?v=1789261386"},{"product_id":"fuel-tank-sump-sealing-washer-fits-jaguar-e-type-mk2-more","title":"Fuel Tank Sump Sealing Washer – Fits Jaguar E-Type, Mk2, XJ6 \u0026 XJ12 – Nitrile, Black – Each","description":"\u003cp\u003e\u003cstrong\u003eA flat black nitrile washer that seals the fuel filter and sump to the bottom of the fuel tank on classic Jaguars, replacing OE part C26310.\u003c\/strong\u003e Sold individually, so you can fit a fresh one every time the sump comes off.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart\u003c\/th\u003e\n\u003ctd\u003eFuel tank sump sealing washer (fuel filter seal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOE reference\u003c\/th\u003e\n\u003ctd\u003eC26310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar E-Type, Mk2, S-Type, 420, Mk X, XJ6 and XJ12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eBetween the fuel tank sump and the tank, around the filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eNitrile rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShape\u003c\/th\u003e\n\u003ctd\u003ePlain flat ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 3 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003eEach (one washer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10006768\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy nitrile\u003c\/h3\u003e\n\u003cp\u003eThis washer sits in constant contact with petrol. Ordinary rubber swells and goes soft in fuel; nitrile is the standard choice for fuel and oil seals because it holds its shape and stays springy, so the joint keeps sealing between services.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × fuel tank sump sealing washer, black nitrile\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe sump, filter gauze and drain plug are not included.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork safely.\u003c\/strong\u003e Do this outdoors or in a ventilated space, well away from sparks or flames, and lower the fuel level first.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the sump.\u003c\/strong\u003e Unscrew the sump from the base of the tank and lift out the filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean both faces.\u003c\/strong\u003e Wipe the tank and sump faces clean and dry; any grit or old rubber will stop the new washer sealing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat the washer flat.\u003c\/strong\u003e Lay the new washer squarely in place so it is not pinched or twisted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefit and check.\u003c\/strong\u003e Refit the sump firmly but do not overtighten, refill and check for weeps before driving.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs it sold singly?\u003c\/strong\u003e\u003cbr\u003eYes. The price is for one washer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the small drain plug washer?\u003c\/strong\u003e\u003cbr\u003eNo. C26310 is the larger sump \/ filter seal. The small drain plug washer is a different part (C26311).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my XJ6?\u003c\/strong\u003e\u003cbr\u003eC26310 is listed for the XJ6 and XJ12 as well as the E-Type, Mk2, S-Type, 420 and Mk X. If in doubt, compare it with your old washer or send us a photo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you publish the sizes?\u003c\/strong\u003e\u003cbr\u003eWe do not have confirmed dimensions for this washer, so we have not quoted any. Order by the OE number C26310.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it an original Jaguar part?\u003c\/strong\u003e\u003cbr\u003eNo. It is a quality aftermarket reproduction made to replace C26310.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right washer for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416128434555,"sku":"10006768","price":2.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10006768_flatlay.jpg?v=1794488092"},{"product_id":"door-glass-outer-waist-seal-fits-jaguar-xj6-per-metre","title":"Door Glass Outer Waist Seal – Fits Jaguar XJ6 \u0026 XJ12 Long Wheelbase (OEM BD21073\/4) – Black EPDM – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eThe outer waist seal that runs along the top of the door skin on long wheelbase Jaguar XJ6 and XJ12 saloons, replacing OEM BD21073\/4.\u003c\/strong\u003e Its curved lip wipes the glass as the window winds down, keeping rain and grit out of the door.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar XJ6 and XJ12, long wheelbase models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eDoor glass, outer waist (top of the door skin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM part no.\u003c\/th\u003e\n\u003ctd\u003eBD21073\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eFlat base with an upright fin and a curved wiper lip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003eApprox. 17.5 mm wide x 7.25 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBase\u003c\/th\u003e\n\u003ctd\u003e7 mm wide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWiper lip\u003c\/th\u003e\n\u003ctd\u003e1.6 mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM synthetic rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.07 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre: order the number of metres you need\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code \/ SKU\u003c\/th\u003e\n\u003ctd\u003eIRS1629EPJ \/ 10001262\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\n\u003cp\u003eThe waist seal sits in full sun and is rubbed by the glass every time the window moves. EPDM stays flexible and resists UV and ozone cracking, so the lip keeps contact with the glass for longer than old rubber.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBlack EPDM outer waist seal, cut to the number of metres you order\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure each door.\u003c\/strong\u003e Measure the old seal on every door you are doing, add a little for trimming, and order the total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the old seal.\u003c\/strong\u003e Wind the glass down and lift off any trim covering the seal before taking it off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the rail.\u003c\/strong\u003e Clear old rubber, adhesive and rust from the top of the door.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit the new seal.\u003c\/strong\u003e Lay the base along the rail with the curved lip facing the glass, working from one end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and test.\u003c\/strong\u003e Cut the ends square, refit the trim and run the window up and down to check the lip wipes evenly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it priced?\u003c\/strong\u003e\u003cbr\u003ePer metre. Measure each door and order the total length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the short wheelbase XJ6?\u003c\/strong\u003e\u003cbr\u003eThe supplier lists it for long wheelbase models. If your car is a short wheelbase saloon or a coupe, send us a photo of your old seal so we can check before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the inner or outer seal?\u003c\/strong\u003e\u003cbr\u003eOuter. It sits on the outside of the door, along the bottom edge of the window opening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size is it?\u003c\/strong\u003e\u003cbr\u003eAbout 17.5 mm wide and 7.25 mm high on a 7 mm base, with a 1.6 mm thick lip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need adhesive?\u003c\/strong\u003e\u003cbr\u003eFix it the same way your original was held. If the old seal was bonded, use a trim adhesive suitable for EPDM.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right seal for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416132137339,"sku":"10001262","price":8.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10001262_section.png?v=1794484702"},{"product_id":"steering-column-gaiter-fits-jaguar-e-type-xj-series-per-metre","title":"Steering Column Gaiter – Fits Jaguar E-Type \u0026 XJ Series – Each","description":"\u003cp\u003e\u003cstrong\u003eHigh-quality steering column gaiter for classic Jaguars.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis convoluted rubber gaiter suits the Jaguar E-Type Series 1, 2 and 3 and the XJ6 and XJ12. It is a direct replacement for the original part.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Durable black rubber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Jaguar E-Type and XJ Series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Compatibility:\u003c\/strong\u003e Reproduces the original part.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eJaguar E-Type Series 1, 2 \u0026amp; 3\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eJaguar XJ6 and XJ12\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSupplied As\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eEach:\u003c\/strong\u003e the price is for one moulded gaiter.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ? Is it sold by the metre?\u003c\/strong\u003e\u003cbr\u003eA. No. It is a single moulded gaiter, sold each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ? Does it fit other Jaguar models?\u003c\/strong\u003e\u003cbr\u003eA. It is designed for the E-Type and XJ6\/XJ12.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ? What colour is it?\u003c\/strong\u003e\u003cbr\u003eA. Black, as original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ? Is it original or aftermarket?\u003c\/strong\u003e\u003cbr\u003eA. A high-quality aftermarket reproduction.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416138035579,"sku":"10005021","price":20.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10005021_1.jpg?v=1789262942"}],"url":"https:\/\/industrial-polymers.co.uk\/collections\/jaguar-xj6.oembed","provider":"Industrial-polymers ","version":"1.0","type":"link"}