{"title":"Other Shapes","description":null,"products":[{"product_id":"boot-lid-seal-fits-triumph-dolomite-sprint-per-metre","title":"Boot Lid Seal – Fits Triumph Dolomite Range incl. Sprint (OEM 720438) – EPDM Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA replacement boot lid seal for the Triumph Dolomite range, including the Sprint, made in black EPDM sponge rubber to OEM part 720438.\u003c\/strong\u003e It is sold by the metre, so you order the length your boot opening needs and receive it as one piece.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph Dolomite range, including the Dolomite Sprint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eBoot lid opening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM part number\u003c\/th\u003e\n\u003ctd\u003e720438\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaker code\u003c\/th\u003e\n\u003ctd\u003eSRS160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eCupped sponge section with an open centre channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.08 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, cut as one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10006662\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eEPDM stands up well to sunlight, ozone and wet weather, so it stays soft far longer than the old rubber it replaces. The sponge form is soft and squashes down easily as the lid closes on it.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eBoot lid seal cut to the number of metres you order, in one continuous length\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure first.\u003c\/strong\u003e Run a tape round the boot opening where the old seal sat and add a little for trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip and clean.\u003c\/strong\u003e Remove the old seal and clean the face it sat on of dirt, rust and any old glue.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatch the old position.\u003c\/strong\u003e Lay the new seal where the old one was, working round from one point without stretching the sponge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoin neatly.\u003c\/strong\u003e Cut the end square and butt it tight to the start.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the fit.\u003c\/strong\u003e Close the lid gently and check for gaps before driving in the rain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price for the whole seal?\u003c\/strong\u003e\u003cbr\u003eNo. The price is per metre. Order 3 to receive one continuous 3 m length, and so on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I need?\u003c\/strong\u003e\u003cbr\u003eMeasure round your boot opening, or measure the old seal, and round up to the next whole metre.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit models other than the Sprint?\u003c\/strong\u003e\u003cbr\u003ePart 720438 is listed by other Triumph parts suppliers for the Dolomite range as well as the Sprint. If your car has been modified, send us a photo of the old seal first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the profile look like?\u003c\/strong\u003e\u003cbr\u003eIt is a black sponge section with a cupped, open centre channel. See the end-view drawing in the photos.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre profile dimensions available?\u003c\/strong\u003e\u003cbr\u003eNo sizes are published for this seal, so our drawing is illustrative. Compare it with your old seal before ordering.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure it is the right seal? Send us a photo of your old one and we will check.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416113033595,"sku":"10006662","price":16.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/triumph-dolomite-boot-lid-seal-fitting-eefea84c-a4d8-490f-821e-85f9c69e2cb5.jpg?v=1794566335"},{"product_id":"sponge-rubber-section-16mm-wide-x-15mm-high-per-metre","title":"Slotted Sponge Rubber Section (16mm Wide x 15mm High) – Universal, Adaptable for Jaguar XK120\/XK140 – Expanded EPDM Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA solid black expanded EPDM sponge section with a rounded crown and a narrow slot running in from one side.\u003c\/strong\u003e It is a general-purpose door, window and panel seal, and the supplier notes it can be adapted as a Jaguar XK120\/XK140-type seal by cutting the base to suit.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eDoors, windows and panels on classic cars, buses, caravans, rail, marine and similar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAdaptable for\u003c\/th\u003e\n\u003ctd\u003eJaguar XK120 \/ XK140-type seal, with the base cut to suit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight\u003c\/th\u003e\n\u003ctd\u003eCatalogue approx. 15 mm; profile drawing 13 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSlot\u003c\/th\u003e\n\u003ctd\u003eCatalogue approx. 3 mm; profile drawing 2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFlat base\u003c\/th\u003e\n\u003ctd\u003e9 mm (profile drawing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded EPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.17 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as \/ SKU\u003c\/th\u003e\n\u003ctd\u003ePer metre, one continuous length \/ SRS143, 10006651\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eExpanded EPDM is soft enough to seal with light closing pressure and cuts cleanly with a sharp blade, which makes it ideal when a section has to be trimmed to fit. It resists UV, ozone and weather, so it will not harden and crack like old rubber.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThe number of metres you order, as one unbroken length of SRS143 sponge section\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eAdhesive is not included.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the profile.\u003c\/strong\u003e Compare the end of your old seal with our section drawing. Note the slot sits off-centre, nearer the top.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim if needed.\u003c\/strong\u003e For an XK-type fit, trim the base with a sharp knife against a straight edge, a little at a time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface.\u003c\/strong\u003e Remove old rubber and glue, degrease and let it dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit it.\u003c\/strong\u003e Push the slot over its edge, or bond the base with a contact adhesive suited to EPDM, without stretching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and test.\u003c\/strong\u003e Cut a little long, butt the ends tight and close the panel to check the seal.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a direct fit for my Jaguar XK120 or XK140?\u003c\/strong\u003e\u003cbr\u003eNot straight off the roll. The supplier says it can be used as an XK-type seal once the base is cut to suit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do the height and slot sizes differ?\u003c\/strong\u003e\u003cbr\u003eThe catalogue gives approx. 15 mm high with a 3 mm slot; the profile drawing shows 13 mm and 2 mm. Use the drawing to match your old seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf I order 3, is it one piece?\u003c\/strong\u003e\u003cbr\u003eYes, one continuous 3 m length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hollow?\u003c\/strong\u003e\u003cbr\u003eNo. It is solid sponge with a single side slot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I paint it?\u003c\/strong\u003e\u003cbr\u003eNo. Leave EPDM unpainted and clean it with mild soapy water.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure this is the right profile? Send us a photo of the cut end of your old seal and we will check it before you order.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416122962299,"sku":"10006651","price":16.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10006651_3d_render.png?v=1794526031"},{"product_id":"sponge-section-dual-hardness-seal-fits-mini-other-classic-cars-per-metre","title":"Opening Quarter Light Seal – Fits Classic Mini Mk1 – Dual Hardness EPDM\/Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eThe seal for the classic Mini's rear opening quarter light (side window), Mk1 profile, made as a dual hardness extrusion to the OEM ALA5897 pattern.\u003c\/strong\u003e A firm black EPDM carrier with a narrow slot holds it on the edge, and a soft sponge lip seals against the body as the window closes.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eClassic Mini, Mk1-type rear opening quarter light (opening rear side window)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003eALA5897\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile size\u003c\/th\u003e\n\u003ctd\u003e16 mm wide x 22.5 mm high on the profile drawing (catalogue: approx. 16 x 20 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSlot\u003c\/th\u003e\n\u003ctd\u003eApprox. 2 mm wide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eDual hardness: dense EPDM carrier, EPDM sponge lip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.17 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOther uses\u003c\/th\u003e\n\u003ctd\u003eWindow and door sealing on other classic cars\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, in one continuous length (extrusion, not a moulded frame)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code \/ SKU\u003c\/th\u003e\n\u003ctd\u003eSRS127 \/ 10006636\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy dual hardness EPDM\u003c\/h3\u003e\n\u003cp\u003eThe dense carrier grips its edge firmly and will not stretch out of shape, while the sponge lip compresses easily so the window latch closes without strain. EPDM resists UV, ozone and rain, so it keeps sealing long after old rubber has gone hard.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThe number of metres you order, as one unbroken length of SRS127 quarter light seal\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure both windows.\u003c\/strong\u003e Measure the run on each opening quarter light, add some for trimming and order the total in whole metres.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork on the bench.\u003c\/strong\u003e Take the opening window out if you can; it is far easier to fit the seal flat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the edge.\u003c\/strong\u003e Strip the old seal and clean the edge that will sit in the 2 mm slot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress it on.\u003c\/strong\u003e Start at a corner and press the slot over the edge, easing it round the curves without stretching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and refit.\u003c\/strong\u003e Cut a little long, butt the ends tight, refit the window and check it closes and latches.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the right seal for my Mini?\u003c\/strong\u003e\u003cbr\u003eIt is the Mk1-type opening quarter light profile (ALA5897). Compare your old seal with our section drawing before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I get a seal for each side?\u003c\/strong\u003e\u003cbr\u003eYou buy it by the metre. Measure both windows and order the total; it arrives as one length that you cut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do the heights differ?\u003c\/strong\u003e\u003cbr\u003eThe catalogue says approx. 20 mm high; the profile drawing shows 22.5 mm. Use the drawing to match your old seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need glue?\u003c\/strong\u003e\u003cbr\u003eUsually not; the slot grips the edge. A small dab of adhesive suited to EPDM at the joint helps keep the ends together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it on other cars?\u003c\/strong\u003e\u003cbr\u003eYes, wherever this profile suits an opening window or door edge.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure this is the right profile? Send us a photo of the cut end of your old seal and we will check it before you order.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416123060603,"sku":"10006636","price":12.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10006636_3d.png?v=1794526459"},{"product_id":"sponge-section-seal-fits-classic-mini-vans-other-applications-per-metre","title":"Rear Door Seal – Fits Classic Mini Van \u0026 Estate (Left-Hand Door) – EPDM Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eThe sponge rubber section for the left-hand rear door of the classic Mini Van and Estate, made in black expanded EPDM to the OEM 14A7609 pattern.\u003c\/strong\u003e It has a pointed crest that meets the closing door, a concave outer face and a narrow slot along the base. It also works as a general-purpose door or hatch seal.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eClassic Mini Van and Mini Estate, left-hand rear door\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003e14A7609\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOther uses\u003c\/th\u003e\n\u003ctd\u003eDoor and hatch sealing on cars, buses, caravans, rail and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile size\u003c\/th\u003e\n\u003ctd\u003e17.5 mm wide x 17 mm high on the profile drawing (catalogue: approx. 21 x 20 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSlot\u003c\/th\u003e\n\u003ctd\u003eApprox. 1.5 mm, along the base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded EPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.14 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, in one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code \/ SKU\u003c\/th\u003e\n\u003ctd\u003eSRS125 \/ 10004121\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eClosed-cell EPDM sponge compresses easily, so the rear door shuts without force, then springs back to keep out rain and draughts. EPDM resists UV, ozone and weather, so it lasts far longer than the original rubber that goes hard and flat on old vans.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThe number of metres you order, as one unbroken length of SRS125 sponge section\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eAdhesive is not included.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the door.\u003c\/strong\u003e Measure the full run on the left-hand rear door and add about 100 mm for trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip and clean.\u003c\/strong\u003e Remove the old seal and every trace of old glue, treat any rust and degrease the face.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlue it in.\u003c\/strong\u003e Use a contact adhesive suited to EPDM and lay the seal in without stretching it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork the corners.\u003c\/strong\u003e Ease it round the door corners gently so the crest stays upright.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and check.\u003c\/strong\u003e Butt the ends tightly, then close the door and check it seals all round.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the right-hand rear door?\u003c\/strong\u003e\u003cbr\u003eOEM 14A7609 is the left-hand door seal. The right-hand door uses a different seal, so check your old profile against our drawing first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many metres do I need?\u003c\/strong\u003e\u003cbr\u003eMeasure your door. Order whole metres and you receive one continuous length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do the sizes differ?\u003c\/strong\u003e\u003cbr\u003eThe supplier catalogue gives approx. 21 x 20 mm; the profile drawing shows 17.5 x 17 mm. Go by the drawing when matching your old seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eNo. Bond it with a contact adhesive suited to EPDM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it on other vehicles?\u003c\/strong\u003e\u003cbr\u003eYes. Any door or hatch that needs this profile can use it.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure this is the right profile? Send us a photo of the cut end of your old seal and we will check it before you order.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416123126139,"sku":"10004121","price":8.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10004121_3d.png?v=1794526649"},{"product_id":"hood-seal-fits-triumph-spitfire-per-metre","title":"Hood Seal – Fits Triumph Spitfire – Dual-Hardness EPDM \/ Sponge Angle Section, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA dual-hardness angle-section hood seal for the Triumph Spitfire: a firm EPDM base to mount it and a soft sponge body and lip to seal against.\u003c\/strong\u003e Sold by the metre and supplied as one continuous length, so you can cut it to the run on your car.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph Spitfire hood seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eAngle section with an extended sealing lip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eDual hardness: dense EPDM base, EPDM sponge body and lip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize (supplier drawing)\u003c\/th\u003e\n\u003ctd\u003e28 mm wide × 23.5 mm high, 8 mm base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize (supplier text)\u003c\/th\u003e\n\u003ctd\u003eApprox. 21 mm wide × 14 mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.22 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, in one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code \/ SKU\u003c\/th\u003e\n\u003ctd\u003eSRS144 \/ 10006652\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy dual hardness\u003c\/h3\u003e\n\u003cp\u003eThe firm base holds the seal in place and keeps its shape where it is mounted, while the soft sponge lip flexes and follows the closing panel. Both parts are EPDM, which resists sunlight, rain and ozone well.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eDual-hardness hood seal, cut to the number of metres ordered and supplied as one length\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompare first.\u003c\/strong\u003e Hold the cut end of your old seal against our drawing before you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote the direction.\u003c\/strong\u003e Before removing the old seal, note which way its lip faces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the mounting.\u003c\/strong\u003e Remove old adhesive, dirt and rust so the base sits down fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit without stretching.\u003c\/strong\u003e Seat the dense base first with the lip facing the same way as before.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and check.\u003c\/strong\u003e Cut a little long, butt the ends, then close the panel and check the lip touches all along.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the metres you need and it arrives as one piece.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are two sizes quoted?\u003c\/strong\u003e\u003cbr\u003eOur supplier's drawing shows 28 × 23.5 mm with an 8 mm base, while their written description says about 21 × 14 mm. Please measure your old seal; if it does not match the drawing, contact us before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it EPDM?\u003c\/strong\u003e\u003cbr\u003eYes. Dense EPDM base with an EPDM sponge body and lip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used elsewhere?\u003c\/strong\u003e\u003cbr\u003eYes. The same section is used on doors, windows and hatches on cars, buses, caravans and boats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I paint it?\u003c\/strong\u003e\u003cbr\u003eNo. Leave EPDM unpainted and clean it with mild soapy water.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right seal for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416123912571,"sku":"10006652","price":17.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10006652_3d.png?v=1794526460"},{"product_id":"sponge-section-crown-strip-15mm-x-7-5mm-black-epdm-per-metre","title":"Ribbed Sponge Crown Strip 14.5 x 7.5mm – Fits Doors, Hatches \u0026 Frames – Self-Adhesive Black Sponge EPDM – 50m Coil","description":"\u003cp\u003e\u003cstrong\u003eA deeper sponge EPDM crown strip, 14.5 mm wide and 7.5 mm high, with a ribbed top and a self-adhesive base, supplied as one continuous 50 m coil.\u003c\/strong\u003e The extra height lets it fill bigger gaps on doors, hatches and window frames while the ribs keep it easy to compress.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eDoors, hatches, lids and window frames on classic cars, coaches, caravans and enclosures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eSolid sponge strip with 5 narrow round-tipped ridges and 4 deep grooves\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSponge (expanded) EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eSelf-adhesive base with peel-off liner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003eOne 50 m coil per unit (quantity 2 = two coils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eSRS136-50M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy sponge EPDM\u003c\/h3\u003e\n\u003cp\u003eEPDM resists sunlight, rain and ozone, so the strip keeps working on outside doors and hatches. As a sponge it squashes under modest closing force, and the deep grooves between the ridges give it room to do so.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 × 50 m coil of ribbed sponge crown strip, 14.5 × 7.5 mm, adhesive pre-applied\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the landing.\u003c\/strong\u003e The base needs at least 14.5 mm of flat surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the gap.\u003c\/strong\u003e Close the door on a small ball of modelling clay and measure it. Under 7.5 mm means the strip will be squeezed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean it.\u003c\/strong\u003e Wipe with isopropyl alcohol, let it dry and fit above about 10 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeel and press.\u003c\/strong\u003e Remove the liner a little at a time and press the base down without stretching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorners.\u003c\/strong\u003e Cut and butt-join at corners rather than bending the wide base round.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eNo. One unit is a complete 50 m coil.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it 15 mm or 14.5 mm wide?\u003c\/strong\u003e\u003cbr\u003eThe profile is 14.5 mm wide. It is sometimes listed as 15 mm, rounded up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a smaller version?\u003c\/strong\u003e\u003cbr\u003eYes, we also sell a 10 × 5 mm three-crown strip and a lower 15 × 4 mm crown strip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut it?\u003c\/strong\u003e\u003cbr\u003eYes, with a sharp knife.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need glue?\u003c\/strong\u003e\u003cbr\u003eNo, the adhesive is already on the base.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right strip, send us your measurements before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416123945339,"sku":"IP-CS-15435183817083","price":178.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10006647_3d_render.png?v=1794526032"},{"product_id":"sponge-section-crown-strip-15mm-x-5mm-black-epdm-rubber-per-metre","title":"Four-Crown Sponge Strip 15 x 4mm – Fits Lids, Panels \u0026 Hatches – Self-Adhesive Black Sponge EPDM – 100m Coil","description":"\u003cp\u003e\u003cstrong\u003eA low, wide sponge EPDM strip with a wavy top of five rounded crests and a self-adhesive base, supplied as one continuous 100 m coil.\u003c\/strong\u003e At only 4 mm high it suits tight gaps under lids, panels and hatches, with five soft sealing lines side by side.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eLids, hatches, panels and doors on classic cars, caravans, buses and boats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eSolid sponge strip with a wavy top: 5 rounded crests and 4 shallow troughs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSponge (expanded) EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eSelf-adhesive base with peel-off liner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003eOne 100 m coil per unit (quantity 2 = two coils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eSRS135-100M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy sponge EPDM\u003c\/h3\u003e\n\u003cp\u003eEPDM stands up well to weather, UV and ozone, so the strip works outside as well as in. The sponge compresses under light pressure, and the five crests spread that pressure so an uneven lid still makes contact along its length.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 × 100 m coil of crown sponge strip, 15 × 4 mm, adhesive pre-applied\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the landing.\u003c\/strong\u003e The base needs at least 15 mm of flat surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the gap.\u003c\/strong\u003e Measure the closed gap with feeler gauges. It should be less than 4 mm so the crests are squeezed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean it.\u003c\/strong\u003e Wipe with isopropyl alcohol, let it dry and fit above about 10 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeel and press.\u003c\/strong\u003e Remove the liner a little at a time and press the base down without stretching it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun the crests lengthways.\u003c\/strong\u003e Lay the strip along the joint so every crest forms a continuous line, and butt-join at corners.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eNo. One unit is a full 100 m coil.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it 15 × 4 or 15 × 5 mm?\u003c\/strong\u003e\u003cbr\u003eThe profile is 15 mm wide and 4 mm high. The web address says 5 mm, but the part itself is the 4 mm strip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many crowns does it have?\u003c\/strong\u003e\u003cbr\u003eIt is sold as a four-crown strip, but the supplier's profile drawing shows five rounded crests across the top, with four shallow troughs between them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hollow?\u003c\/strong\u003e\u003cbr\u003eNo. It is a solid sponge section with a flat base.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut and join it?\u003c\/strong\u003e\u003cbr\u003eYes. Cut square with a sharp blade and butt the ends together tightly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need glue?\u003c\/strong\u003e\u003cbr\u003eNo, the base is self-adhesive.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right strip, send us your measurements before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416123978107,"sku":"IP-CS-15435183849851","price":252.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10006646_render.png?v=1794525387"},{"product_id":"sponge-section-crown-strip-10mm-x-5mm-per-metre","title":"Three-Crown Sponge Strip 10 x 5mm – Fits Doors, Lids \u0026 Hatches – Self-Adhesive Black Sponge EPDM – 100m Coil","description":"\u003cp\u003e\u003cstrong\u003eA slim black sponge EPDM strip with three rounded crowns on top and a peel-and-stick base, supplied as one continuous 100 m coil.\u003c\/strong\u003e The crowns give three soft contact lines that close up draughts, dust and rattles on doors, lids, lockers and hatches without making them hard to shut.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eDoors, lids, lockers, hatches and frames on classic cars, coaches, caravans and boats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eSolid sponge strip with 3 rounded crowns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSponge (expanded) EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eSelf-adhesive base with peel-off liner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003eOne 100 m coil per unit (quantity 2 = two coils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eSRS134-100M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy sponge EPDM\u003c\/h3\u003e\n\u003cp\u003eEPDM copes well with sun, rain and ozone, so it is a sensible choice for outside lockers and hatches as well as interiors. In sponge form it squashes under light closing pressure and springs back, which is what you want on light doors and lids.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 × 100 m coil of three-crown sponge strip, 10 × 5 mm, adhesive pre-applied\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the landing.\u003c\/strong\u003e You need at least 10 mm of flat surface for the base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the gap.\u003c\/strong\u003e The closed gap should be less than 5 mm so the crowns are squeezed when shut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean it.\u003c\/strong\u003e Wipe with isopropyl alcohol and let it dry. Fit at room temperature, above about 10 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeel and press.\u003c\/strong\u003e Lift the liner a little at a time and press the base down firmly. Do not stretch the strip as you lay it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorners and joins.\u003c\/strong\u003e Cut and butt-join at sharp corners rather than bending the base on edge.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eNo. One unit is a complete 100 m coil.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it hollow?\u003c\/strong\u003e\u003cbr\u003eNo. It is a solid sponge section; the crowns do the sealing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it suit a wider gap?\u003c\/strong\u003e\u003cbr\u003eIf the closed gap is more than 5 mm it will not touch. Look at our 14.5 × 7.5 mm ribbed crown strip instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut it?\u003c\/strong\u003e\u003cbr\u003eYes, sponge cuts cleanly with a sharp knife.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need glue?\u003c\/strong\u003e\u003cbr\u003eNo. The adhesive is already on the base; just keep the surface clean and dry.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right strip, send us your measurements before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416124043643,"sku":"IP-CS-15435183915387","price":178.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10006645_render.png?v=1794525387"},{"product_id":"sponge-section-white-expanded-epdm-8mm-x-6mm-per-metre","title":"Self-Adhesive Sponge Wrap-Over Seal – 9 x 7mm White EPDM – 100m Coil","description":"\u003cp\u003e\u003cstrong\u003eA white sponge wrap-over seal with a self-adhesive base, supplied as a full 100 m coil.\u003c\/strong\u003e The angled lip folds over as the closing panel meets it, giving a soft, light-touch seal on doors, windows and hatches where a black seal would stand out.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eDoors, windows and hatches on classic cars, buses, caravans, rail and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eWrap-over: solid angled lip on a flat base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize (profile drawing)\u003c\/th\u003e\n\u003ctd\u003e9 mm wide × 7 mm high; base 2 mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalogue size\u003c\/th\u003e\n\u003ctd\u003eQuoted by the supplier as approx. 8 mm wide × 6 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded (sponge) EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eSelf-adhesive backing with peel-off liner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 1 kg per coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003eOne continuous 100 m coil per unit – quantity 2 means two coils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCode\u003c\/th\u003e\n\u003ctd\u003eSRS133-100M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eClosed-cell EPDM sponge needs very little force to compress, so light panels still close easily. It stays flexible through heat, frost and sunlight, which makes it a dependable choice for interior and exterior seals alike.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 × 100 m coil of white self-adhesive sponge wrap-over seal\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the landing.\u003c\/strong\u003e You need at least 9 mm of flat, clean surface for the base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the face.\u003c\/strong\u003e Wipe with isopropyl alcohol and let it dry fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace the lip correctly.\u003c\/strong\u003e Position it so the closing panel folds the lip over rather than pushing on its tip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeel and press.\u003c\/strong\u003e Peel the liner a little at a time and press the base down, without stretching the sponge. Fit above about 10 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoin neatly.\u003c\/strong\u003e Cut square and butt the ends together on a straight run.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eNo. The price is for a complete 100 m coil.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the profile hollow?\u003c\/strong\u003e\u003cbr\u003eNo. The supplier's profile drawing shows a solid sponge lip on a flat base.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do the sizes differ?\u003c\/strong\u003e\u003cbr\u003eThe supplier's catalogue text says approx. 8 × 6 mm; their profile drawing measures 9 × 7 mm. Our title and drawing use the profile drawing figures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut it?\u003c\/strong\u003e\u003cbr\u003eYes. Sponge cuts cleanly with a sharp knife or scissors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the adhesive hold on any surface?\u003c\/strong\u003e\u003cbr\u003eIt bonds best on clean, smooth, dry paint, metal, glass or plastic. Prime rough or porous surfaces first.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right profile for your job, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416124141947,"sku":"IP-CS-15435184013691","price":236.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/srs133-white-sponge-wrap-over-seal-fitting-9fcad3e4-f979-4301-9e58-cbd2672caa5b.jpg?v=1794600832"},{"product_id":"sponge-rubber-seal-fits-jaguar-xk120-xk140-per-metre","title":"Rear Bonnet Rest Rubber – Fits Jaguar XK120, XK140, Mk1 \u0026 Mk2 – Black Expanded Sponge – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eThe rest rubber that sits at the rear edge of the bonnet, in black expanded sponge to the BD4920 pattern.\u003c\/strong\u003e The bonnet comes down onto its curved crest, which cushions the panel, stops it drumming and keeps it from chafing the paint on the scuttle.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar XK120 and XK140; the same BD4920 section is listed for the Mk1 and Mk2 saloons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eRest rubber at the rear of the bonnet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eCurved crest with a push-on slot open at the base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize (profile drawing)\u003c\/th\u003e\n\u003ctd\u003e26 mm wide × 22 mm high; 19.5 mm high on the slot side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalogue size\u003c\/th\u003e\n\u003ctd\u003eQuoted by the supplier as approx. 27 mm wide × 19 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded sponge rubber (supplier code SRS121N; described as neoprene sponge)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003eBD4920\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.39 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre – one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU \/ code\u003c\/th\u003e\n\u003ctd\u003e10006632 \/ SRS121N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy sponge\u003c\/h3\u003e\n\u003cp\u003eA bonnet rest needs to be soft enough to absorb the weight of the panel without marking it, yet firm enough to hold its shape. Closed-cell sponge does both, and it does not soak up water the way open foam would.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThe number of metres you order, as one continuous length of SRS121N sponge section\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eAdhesive is not included.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the old rubber.\u003c\/strong\u003e Measure the length you are replacing and add a little for trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the flange.\u003c\/strong\u003e Remove the old rubber and any glue, and treat surface rust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush it on.\u003c\/strong\u003e Press the slot over the flange so the curved crest faces the bonnet. A little EPDM-compatible adhesive in the slot keeps it from creeping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim the ends.\u003c\/strong\u003e Cut the ends square with a sharp knife.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the bonnet.\u003c\/strong\u003e Lower the bonnet gently and make sure it rests evenly on the rubber before latching.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the Mk2 saloon as well as the XK?\u003c\/strong\u003e\u003cbr\u003eJaguar specialists list the BD4920 bonnet rest seal for the Mk1 and Mk2 saloons as well as the XK120 and XK140. Compare it with your old rubber if unsure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the metres you need and we cut one continuous length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it EPDM or neoprene?\u003c\/strong\u003e\u003cbr\u003eThe supplier's description says expanded neoprene sponge, while their specification field says EPDM. We describe it simply as black expanded sponge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do the sizes differ?\u003c\/strong\u003e\u003cbr\u003eThe supplier's profile drawing measures 26 × 22 mm; their catalogue text says approx. 27 × 19 mm. Our drawing uses the profile drawing figures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine Jaguar part?\u003c\/strong\u003e\u003cbr\u003eNo. It is a quality aftermarket reproduction.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right profile for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416124207483,"sku":"10006632","price":16.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10006632_3d.png?v=1794526462"},{"product_id":"sponge-rubber-section-fits-jaguar-xj6-series-2-coupe-per-metre","title":"Upper Door Seal – Fits Jaguar XJ6 \u0026 XJ12 Series 2 Coupe – Black EPDM – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eThe upper door seal section for the two-door Jaguar XJ6 and XJ12 Series 2 Coupe, made in black EPDM to the BD44122 pattern.\u003c\/strong\u003e It runs along the top of the door, where the door and window close against it, so a hardened original lets in wind noise and water.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar XJ6 Coupe and XJ12 Coupe (Series 2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eUpper door seal; the same profile is used on both doors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eTall stem with a rounded upper bead, open channel, angled side tail and a dense foot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChannel aperture\u003c\/th\u003e\n\u003ctd\u003eApprox. 5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize (profile drawing)\u003c\/th\u003e\n\u003ctd\u003e33 mm high × 24 mm wide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalogue size\u003c\/th\u003e\n\u003ctd\u003eQuoted by the supplier as approx. 30 mm wide × 33 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003eBD44122\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.32 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre – one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU \/ code\u003c\/th\u003e\n\u003ctd\u003e10006631 \/ SRS119\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\n\u003cp\u003eEPDM keeps its flexibility for years in sunlight, ozone and rain, where older rubber goes hard and loses its shape. A seal that stays soft keeps pressing against the door top and glass, which is what keeps wind and water out.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThe number of metres you order, as one continuous length of SRS119 section\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eAdhesive is not included. You need one run per door, so measure both doors before ordering.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the old seal.\u003c\/strong\u003e Measure each door's run before removing the old seal and add about 100 mm for trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote the orientation.\u003c\/strong\u003e Photograph which way the tail faces before you strip the old one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the channel.\u003c\/strong\u003e Remove old rubber and glue and degrease the mounting face.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit without stretching.\u003c\/strong\u003e Seat the foot along the full length and ease it round the curve; stretched EPDM shrinks back and opens gaps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjust and test.\u003c\/strong\u003e Wind the glass up, close the door gently and check the contact line along the top.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the XJ12 Coupe too?\u003c\/strong\u003e\u003cbr\u003eYes. Jaguar specialists list BD44122 for both the XJ6 and XJ12 Coupe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit the four-door saloon?\u003c\/strong\u003e\u003cbr\u003eNo. This section is listed for the two-door Coupe only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLeft or right door?\u003c\/strong\u003e\u003cbr\u003eThe profile is the same for both doors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the metres you need and we cut one continuous length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do the sizes differ?\u003c\/strong\u003e\u003cbr\u003eThe supplier's profile drawing gives 24 mm across the base and tail, while their catalogue text says approx. 30 mm wide; both agree on the 33 mm height. Compare with your old seal if unsure.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right profile for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416124273019,"sku":"10006631","price":25.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/srs119-upper-door-seal-fitting-30e0d84d-9089-47bc-92c0-fb50ba9a5bab.jpg?v=1794607719"},{"product_id":"sponge-rubber-seal-fits-jaguar-xk-per-metre","title":"Boot Lid Seal – Fits Jaguar XK – Black EPDM Sponge – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA sponge boot lid seal for the classic Jaguar XK, made in black expanded EPDM to the BD4875 pattern.\u003c\/strong\u003e The rounded top takes the weight of the closing lid, and the curled lip and angled slot let the section flex and seal without the lid having to be slammed.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eClassic Jaguar XK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eBoot (trunk) lid seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eRounded top, curled lip over an angled slot, flat base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSlot width\u003c\/th\u003e\n\u003ctd\u003eApprox. 3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize (profile drawing)\u003c\/th\u003e\n\u003ctd\u003e16 mm wide × 13.5 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalogue size\u003c\/th\u003e\n\u003ctd\u003eQuoted by the supplier as approx. 18 mm wide × 15 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded (sponge) EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003eBD4875\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.10 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre – one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU \/ code\u003c\/th\u003e\n\u003ctd\u003e10006628 \/ SRS116\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eClosed-cell EPDM sponge compresses easily and springs back, so the lid closes with light pressure and still seals. Unlike the natural rubber of the period it resists sunlight, ozone and water, so it does not go hard and crack after a few seasons.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThe number of metres you order, as one continuous length of SRS116 sponge seal\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eAdhesive is not included.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the run.\u003c\/strong\u003e Measure round the boot opening and add about 100 mm for trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean back.\u003c\/strong\u003e Remove the old seal and glue, treat any rust and degrease the face.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry fit.\u003c\/strong\u003e Lay a short piece in place and close the lid to check which way the lip should face.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlue it in.\u003c\/strong\u003e Use a contact adhesive suitable for EPDM and lay the seal in without stretching it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoin and test.\u003c\/strong\u003e Butt the ends tightly at the least visible point and check the lid closes evenly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the metres you need and it is cut as one continuous length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich XK does it fit?\u003c\/strong\u003e\u003cbr\u003eBD4875 is listed by Jaguar specialists as the XK boot lid seal. If you are unsure about your model, send us a photo of the old seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do the sizes differ?\u003c\/strong\u003e\u003cbr\u003eThe supplier's profile drawing gives 16 × 13.5 mm, while their catalogue text says approx. 18 × 15 mm. Our drawing uses the profile drawing figures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine Jaguar part?\u003c\/strong\u003e\u003cbr\u003eNo. It is a quality aftermarket reproduction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I paint it?\u003c\/strong\u003e\u003cbr\u003eNo. Leave EPDM unpainted; clean it with mild soapy water.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right profile for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416124305787,"sku":"10006628","price":12.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/srs116-jaguar-xk-boot-lid-seal-fitting-da0b1991-e094-4e0a-900f-4b8404c806ef.jpg?v=1794600041"},{"product_id":"expanded-epdm-sponge-strip-fits-triumph-tr4-tr5-tr6-per-metre","title":"Gearbox Tunnel Seal Strip, 30mm with Raised Edges – Fits Triumph TR4, TR5 \u0026 TR6 – Expanded EPDM Sponge, Black – Each (2m Length)","description":"\u003cp\u003e\u003cstrong\u003eA wide black sponge strip with raised edges along both sides, used to seal the gearbox tunnel cover on the Triumph TR4, TR5 and TR6, and supplied as one ready-cut 2 metre length.\u003c\/strong\u003e The shallow channel between the edges helps it sit centred on the flange.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph TR4, TR5 and TR6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eGearbox \/ transmission tunnel cover seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eFlat strip with a raised edge on each side and a shallow centre channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003eApprox. 30 mm wide x 7 mm thick (supplier drawing: 29.5 x 6 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLength\u003c\/th\u003e\n\u003ctd\u003e2 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded EPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.14 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003eEach: one 2 m length per item ordered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004124 (supplier code SRS140-2M)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy expanded EPDM\u003c\/h3\u003e\n\u003cp\u003eThe tunnel seal keeps heat, fumes and draughts from the gearbox out of the cabin. EPDM sponge copes with the warmth near the transmission and stays soft enough to take up the small gaps between the cover and the floor.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 x black sponge tunnel seal strip, 2 m long\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eWe also sell a narrower 18 mm strip: \u003ca href=\"\/products\/expanded-epdm-sponge-strip-fits-triumph-tr4-tr5-tr6-per-metre-1\"\u003eTriumph TR4-TR6 tunnel seal strip, 18 mm, 1.3 m length\u003c\/a\u003e. Check which width your cover uses.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the cover.\u003c\/strong\u003e Lift the carpet, unbolt the tunnel cover and peel off the old strip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean both faces.\u003c\/strong\u003e Scrape away old glue and dirt from the cover flange and the floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-fit first.\u003c\/strong\u003e Lay the strip in place with the raised edges facing as before and mark any cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond it.\u003c\/strong\u003e Fix the strip to the cover flange with a contact adhesive, without stretching it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefit evenly.\u003c\/strong\u003e Bolt the cover down a little at a time so the sponge compresses evenly all round.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it sold?\u003c\/strong\u003e\u003cbr\u003eEach item is one 2 m length. If you need more, order two and butt the ends together neatly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a full kit for the tunnel?\u003c\/strong\u003e\u003cbr\u003eNo. It is a single strip. Measure your old seals first, as some cars use more than one strip or a mix of widths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it 30 mm or 29.5 mm wide?\u003c\/strong\u003e\u003cbr\u003eThe listing size is approx. 30 x 7 mm; the supplier drawing shows 29.5 x 6 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eNo. Use a contact adhesive suitable for EPDM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it elsewhere?\u003c\/strong\u003e\u003cbr\u003eYes. It also works as a general sealing strip on other classic cars, caravans and boats.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure it suits your car? Send us a photo of your old strip and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416128860539,"sku":"10004124","price":16.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/srs140-tunnel-seal-fitting-ddce1e7e-c118-4876-aef2-2d79fe5a0a9c.jpg?v=1794599174"},{"product_id":"expanded-epdm-sponge-strip-fits-triumph-tr4-tr5-tr6-per-metre-1","title":"Gearbox Tunnel Seal Strip, 18mm – Fits Triumph TR4, TR5 \u0026 TR6 – Expanded EPDM Sponge, Black – Each (1.3m Length)","description":"\u003cp\u003e\u003cstrong\u003eA thin black sponge strip that seals the gearbox tunnel cover to the floor on the Triumph TR4, TR5 and TR6, supplied as one ready-cut 1.3 metre length.\u003c\/strong\u003e One edge is raised slightly to help it seat against the cover.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph TR4, TR5 and TR6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eGearbox \/ transmission tunnel cover seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eFlat strip with one raised edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003eApprox. 18 mm wide x 4 mm thick (supplier drawing: 19 x 4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1.3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded EPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.05 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003eEach: one 1.3 m length per item ordered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004126 (supplier code SRS139-1.3M)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy expanded EPDM\u003c\/h3\u003e\n\u003cp\u003eA good tunnel seal keeps engine heat, fumes and draughts out of the cabin. EPDM sponge stays soft and springy under the heat near the gearbox, so it fills the small gaps between the cover and the floor.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 x black sponge tunnel seal strip, 1.3 m long\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eWe also sell a wider 30 mm tunnel strip with raised edges: \u003ca href=\"\/products\/expanded-epdm-sponge-strip-fits-triumph-tr4-tr5-tr6-per-metre\"\u003eTriumph TR4-TR6 tunnel seal strip, 30 mm, 2 m length\u003c\/a\u003e. Check which width your cover uses.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the cover.\u003c\/strong\u003e Take out the seats and carpet as needed, unbolt the tunnel cover and peel off the old strip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean both faces.\u003c\/strong\u003e Scrape away old glue and dirt from the cover flange and the floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-fit first.\u003c\/strong\u003e Lay the strip in place and mark where to cut before applying adhesive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond it.\u003c\/strong\u003e Fix the strip to the cover flange with a contact adhesive, without stretching it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefit evenly.\u003c\/strong\u003e Bolt the cover back down a little at a time so the sponge compresses evenly all round.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it sold?\u003c\/strong\u003e\u003cbr\u003eEach item is one 1.3 m length. If you need more, order two and butt the ends together neatly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a full kit for the tunnel?\u003c\/strong\u003e\u003cbr\u003eNo. It is a single strip. Some cars use more than one strip or a mix of widths, so measure your old seals first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it 18 mm or 19 mm wide?\u003c\/strong\u003e\u003cbr\u003eThe listing size is approx. 18 x 4 mm; the supplier drawing shows 19 x 4 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eNo. Use a contact adhesive suitable for EPDM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it elsewhere?\u003c\/strong\u003e\u003cbr\u003eYes. It also works as a general sealing strip on other classic cars, caravans and boats.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure it suits your car? Send us a photo of your old strip and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416128926075,"sku":"10004126","price":5.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/srs139-tunnel-seal-strip.jpg?v=1794598867"},{"product_id":"expanded-sponge-section-20mm-wide-x-18mm-high-black-per-metre","title":"Sponge M-Section Seal, 20mm Wide x 18mm High – Universal Fit for Doors \u0026 Windows – Expanded Sponge Rubber, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA tall black sponge seal with an M-shaped top: a short side, a notch, a high peak and a long tail that feathers out onto the panel.\u003c\/strong\u003e The open shape folds down easily, so it can close up a deep or uneven gap with little effort.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eUniversal: door, window and other sealing on classic cars, buses, caravans and marine work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eM-section with side notch, peak and tapered tail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eListed size\u003c\/th\u003e\n\u003ctd\u003eApprox. 20 mm wide x 18 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile drawing\u003c\/th\u003e\n\u003ctd\u003e22.5 mm across x 18 mm high; short side 13 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFoot\u003c\/th\u003e\n\u003ctd\u003eApprox. 6 mm wide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.08 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, in one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10006626 (supplier code SRS110)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy sponge rubber\u003c\/h3\u003e\n\u003cp\u003eExpanded sponge is light and compresses under gentle pressure, so a door or window can close fully without fighting the seal. The tall M shape gives it plenty of travel to take up a gap that varies along its length.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eBlack sponge M-section, cut to the number of metres you order and supplied as one length\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the profile.\u003c\/strong\u003e Hold our drawing against your old seal; the listing and drawing widths differ slightly (20 mm and 22.5 mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the surface.\u003c\/strong\u003e Remove old adhesive and dirt where the foot will sit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace it the right way.\u003c\/strong\u003e Copy the direction of the old seal so the tail lies towards the closing panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond without stretching.\u003c\/strong\u003e Use a contact adhesive suitable for rubber and lay the seal in along the run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and test.\u003c\/strong\u003e Cut the ends square, then close the door or window and check the seal line.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it sold?\u003c\/strong\u003e\u003cbr\u003eBy the metre. Order the number of metres you need and you get one continuous length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it 20 mm or 22.5 mm wide?\u003c\/strong\u003e\u003cbr\u003eThe supplier lists approx. 20 mm wide; its profile drawing measures 22.5 mm across the tail. The height is 18 mm in both.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eNo. Bond it with a suitable contact adhesive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat vehicles is it for?\u003c\/strong\u003e\u003cbr\u003eIt is a universal section used on classic cars, buses, caravans and boats. Send us a photo of your old seal if you would like us to check the match.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I paint it?\u003c\/strong\u003e\u003cbr\u003eNo. Leave it unpainted and clean it with mild soapy water.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure this is the right profile? Send us a photo of your old seal and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416128958843,"sku":"10006626","price":9.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10006626_render.png?v=1794527386"},{"product_id":"boot-seal-fits-triumph-tr4-tr5-tr6-per-metre","title":"Boot Lid Seal – Fits Triumph TR4, TR4A \u0026 TR5\/TR250 – Expanded EPDM Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA reproduction of the Triumph boot lid seal, part number 613277, in black expanded EPDM sponge.\u003c\/strong\u003e The slotted profile pushes onto the boot opening edge, and the soft upper face cushions the lid and keeps rain out of the boot floor.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph TR4, TR4A and TR5\/TR250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eBoot lid opening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003e613277\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eUpper face with a raised step, open slot and soft lower lobe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003eApprox. 25 mm wide x 13 mm high (drawing: 24.5 x 13 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSlot\u003c\/th\u003e\n\u003ctd\u003e4 mm wide, 12.5 mm deep (supplier drawing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded EPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.18 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, in one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10006618 (supplier code SRS094EP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy expanded EPDM\u003c\/h3\u003e\n\u003cp\u003eOld boot seals harden and flatten, so the lid stops sealing and water collects on the boot floor. EPDM sponge resists sunlight, ozone and weather, and stays soft enough to compress as the lid closes without forcing the catch.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eBlack sponge boot lid seal, cut to the number of metres you order and supplied as one length\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the opening.\u003c\/strong\u003e Run a tape round the boot opening on the car and add a little for trimming before you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip and clean.\u003c\/strong\u003e Remove the old seal and all old glue, then treat any rust on the edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart at the bottom centre.\u003c\/strong\u003e Push the slot onto the edge and work round, easing it into the corners rather than stretching it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond if needed.\u003c\/strong\u003e A thin line of contact adhesive suitable for EPDM keeps it from creeping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoin and check.\u003c\/strong\u003e Cut the ends square, butt them together at the bottom, then close the lid and check it latches easily.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it sold?\u003c\/strong\u003e\u003cbr\u003eBy the metre. Measure your boot opening and order enough to go round it in one length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the TR6?\u003c\/strong\u003e\u003cbr\u003eParts catalogues do not agree on the TR6, so we list it for the TR4, TR4A and TR5\/TR250, where they do agree. If you have a TR6, compare our profile drawing with your old seal or send us a photo and we will advise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it suit a Spitfire?\u003c\/strong\u003e\u003cbr\u003eSome suppliers also list 613277 for early Spitfires. Compare our profile drawing with your old seal before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eNo. It is held by the slot on the edge; add a little contact adhesive if you want extra grip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I paint it?\u003c\/strong\u003e\u003cbr\u003eNo. Leave it unpainted and clean it with mild soapy water.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure it suits your car? Send us your model and year and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416128991611,"sku":"10006618","price":21.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10006618_render_3d.png?v=1794526523"},{"product_id":"expanded-neoprene-sponge-rubber-section-universal-32mm-width-per-metre","title":"Universal Sponge Seal, 32mm Wide – Fits Jaguar, MG \u0026 Other Classics – Expanded Neoprene, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA wide black neoprene sponge section with a curled hook on one edge, a V-shaped fold and a broad sealing wing.\u003c\/strong\u003e The fold lets the section compress evenly, so the wing presses against the closing door, window or panel along its full width.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eUniversal; applications include Jaguar and MG, plus door and window sealing on other classic cars, buses, caravans, rail and marine work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eCurled hook edge, V fold and wide sealing wing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eListed width\u003c\/th\u003e\n\u003ctd\u003eApprox. 32 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile drawing\u003c\/th\u003e\n\u003ctd\u003e28 mm across x 12 mm high; wing approx. 21 mm from the fold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded neoprene sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.12 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, in one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eSRS096N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10006619\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy expanded neoprene\u003c\/h3\u003e\n\u003cp\u003eNeoprene sponge is soft and springy, so the wing recovers after each closing and keeps contact with the panel. It is also a practical choice near the engine bay or floor, where oil and grease splashes are common.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eBlack neoprene sponge section, cut to the number of metres you order and supplied as one length\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatch the profile.\u003c\/strong\u003e Compare our end-view drawing with your old seal; the listed width (32 mm) and the drawing (28 mm) differ slightly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the flange or face.\u003c\/strong\u003e Remove old adhesive, dirt and loose rust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocate the hook edge first.\u003c\/strong\u003e Set the hooked edge where the old one sat, then lay the wing out towards the closing panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond without stretching.\u003c\/strong\u003e Use a contact adhesive suitable for neoprene and ease the section along the run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and test.\u003c\/strong\u003e Cut the ends square and close the door or panel to check the wing seals all round.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it sold?\u003c\/strong\u003e\u003cbr\u003eBy the metre. Order the number of metres you need and you get one continuous length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich cars is it used on?\u003c\/strong\u003e\u003cbr\u003eThe supplier lists Jaguar and MG applications. It is a universal section, so send us a photo of your old seal if you want us to check the match.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is it 32 mm in the title but 28 mm on the drawing?\u003c\/strong\u003e\u003cbr\u003eThe supplier quotes approx. 32 mm overall width, while its profile drawing measures 28 mm. We show both so you can compare.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eNo. Bond it with a suitable contact adhesive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I paint it?\u003c\/strong\u003e\u003cbr\u003eNo. Leave it unpainted and clean it with mild soapy water.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure this is the right profile? Send us a photo of your old seal and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416129024379,"sku":"10006619","price":25.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/srs096n-neoprene-sponge-seal-fitting-67c6821c-40fa-49ce-9f93-ca3bf1bbb758.jpg?v=1794607307"},{"product_id":"expanded-neoprene-rubber-section-19mm-wide-x-18mm-high-per-metre","title":"Neoprene Sponge Seal with Wiper, 19 x 18mm – Universal Fit for Doors \u0026 Windows – Expanded Neoprene, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA black expanded neoprene sponge section with a solid flat base and an angled wiper arm that flexes against the closing door, window or panel.\u003c\/strong\u003e A small rib on the side of the base helps it locate.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eUniversal: door, window and other sealing on classic cars, buses, caravans, rail and marine work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eFlat base with an angled wiper arm and a small side rib\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eListed size\u003c\/th\u003e\n\u003ctd\u003eApprox. 19 mm wide x 18 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile drawing\u003c\/th\u003e\n\u003ctd\u003e24 mm across x 15 mm high, base 16.5 x 7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded neoprene sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.1 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, in one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eSRS088N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10006615\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy expanded neoprene\u003c\/h3\u003e\n\u003cp\u003eNeoprene sponge is soft, springy and tolerant of oil and grease splashes, so the wiper keeps pushing back against the panel each time it closes. The flat base gives a broad surface to bond to.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eBlack neoprene sponge section with wiper, cut to the number of metres you order and supplied as one length\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the profile first.\u003c\/strong\u003e Two sets of sizes are quoted for this part, so compare our drawing with your old seal before you cut it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the mounting face.\u003c\/strong\u003e Remove old adhesive and dirt so the base can sit flat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace the wiper the right way.\u003c\/strong\u003e The arm should lean towards the closing panel so it is wiped flat, not folded back.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond the base.\u003c\/strong\u003e Use a contact adhesive suitable for neoprene and work along the run without stretching the section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and test.\u003c\/strong\u003e Cut the ends square and close the door or window to check the seal line.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it sold?\u003c\/strong\u003e\u003cbr\u003eBy the metre. Order the number of metres you need and you get one continuous length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are there two sizes?\u003c\/strong\u003e\u003cbr\u003eThe supplier lists it as approx. 19 x 18 mm, but its profile drawing shows 24 x 15 mm overall. Our drawing uses the drawing figures; please check against your old seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eNo. Bond it with a suitable contact adhesive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stay available?\u003c\/strong\u003e\u003cbr\u003eThe supplier is phasing this profile out, so stock is limited.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I paint it?\u003c\/strong\u003e\u003cbr\u003eNo. Leave it unpainted and clean it with mild soapy water.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure this is the right profile? Send us a photo of your old seal and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416129057147,"sku":"10006615","price":4.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/srs088n-sponge-seal-wiper-fitting-cd4cf086-c7e5-4e04-a231-9e8f06d5168e.jpg?v=1794597544"},{"product_id":"expanded-epdm-sponge-wedge-section-13mm-wide-x-6mm-high-per-metre","title":"Sponge Wedge Section, 13 x 6mm – Universal Edging \u0026 Gap Seal – Expanded EPDM, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA low black sponge wedge with a flat base, a square back edge and a curved face that runs down to a fine edge.\u003c\/strong\u003e It is a neat way to finish an edge, protect a panel or fill a gap that narrows to nothing.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eUniversal: edging, protective strip and sealing on classic cars, buses, caravans, rail and marine work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eQuarter-round wedge: flat base, square back, curved face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003eApprox. 13 mm wide x 6 mm high (the supplier profile drawing shows 12 x 6 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded EPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBase\u003c\/th\u003e\n\u003ctd\u003eFlat, for bonding or seating on a flat surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.04 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, in one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eSRS053EP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10006611\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy expanded EPDM\u003c\/h3\u003e\n\u003cp\u003eEPDM copes well with sunlight, ozone and wet weather, so it keeps its shape and flexibility for years outdoors. The sponge form is soft and light, so the thin edge of the wedge follows a surface closely instead of standing proud.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eBlack sponge wedge section, cut to the number of metres you order and supplied as one length\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecide which way it faces.\u003c\/strong\u003e The square back edge usually sits against the step or panel edge, with the thin edge running away from it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the surface.\u003c\/strong\u003e Remove old adhesive, wax and dirt so the flat base can bond fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-fit first.\u003c\/strong\u003e Lay the strip in place and mark any cuts before you apply adhesive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond it.\u003c\/strong\u003e Use a contact adhesive suitable for EPDM and press the base down along its length without stretching it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim the ends.\u003c\/strong\u003e Cut square with a sharp blade for a tidy finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it sold?\u003c\/strong\u003e\u003cbr\u003eBy the metre. Order the number of metres you need and you get one continuous length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it 12 mm or 13 mm wide?\u003c\/strong\u003e\u003cbr\u003eThe listing gives approx. 13 mm; the supplier profile drawing shows 12 mm. Check our drawing against your gap if a millimetre matters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eNo. Bond it with a suitable contact adhesive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. EPDM is chosen for its resistance to UV, ozone and weathering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I paint it?\u003c\/strong\u003e\u003cbr\u003eNo. Leave it unpainted and clean it with mild soapy water.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure this is the right profile? Send us a photo of your old strip and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416129089915,"sku":"10006611","price":7.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/sponge-wedge-section-13x6mm-fitting-05ea4d85-d315-46d0-bf33-8bb5098358bc.jpg?v=1794562843"},{"product_id":"expanded-epdm-sponge-section-12mm-v-profile-rubber-seal-per-metre","title":"Sponge V-Section Seal, 12 x 12mm – Universal Fit for Doors, Windows \u0026 Panels – Expanded EPDM, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA soft black sponge seal with a V-shaped top and a rounded nose, made from expanded EPDM and cut to the length you need.\u003c\/strong\u003e The two flared wings close up as the seal is squeezed, so it fills an angled or uneven gap without needing much closing force.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eUniversal: door, window and panel gaps on classic cars, buses, caravans, rail and marine work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eV-section with an open groove and a rounded nose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003eApprox. 12 mm wide x 12 mm high (the supplier profile drawing shows 13 x 13 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGroove depth\u003c\/th\u003e\n\u003ctd\u003eApprox. 3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded EPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.04 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, in one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eSRS036EP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10003864\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy expanded EPDM\u003c\/h3\u003e\n\u003cp\u003eEPDM stands up well to sunlight, ozone and the weather, so it does not crack and harden the way old natural-rubber seals do. In its expanded (sponge) form it is light and squashes down easily, which makes it a good choice where a panel or door closes onto the seal with only light pressure.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eBlack sponge V-section, cut to the number of metres you order and supplied as one length\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the profile.\u003c\/strong\u003e Hold the drawing up against your old seal or the gap before you cut anything.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the surface.\u003c\/strong\u003e Remove old adhesive, dirt and loose rust so the seal can sit or bond flat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not stretch it.\u003c\/strong\u003e Lay the seal into place along the run; stretched sponge shrinks back and leaves gaps at the ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond if needed.\u003c\/strong\u003e Where the seal is not held mechanically, use a contact adhesive suitable for EPDM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and test.\u003c\/strong\u003e Cut the ends square with a sharp blade, then close the door or panel and check the seal line.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it sold?\u003c\/strong\u003e\u003cbr\u003eBy the metre. Order the number of metres you need and you get one continuous length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it 12 mm or 13 mm?\u003c\/strong\u003e\u003cbr\u003eThe listing size is approx. 12 x 12 mm; the supplier's profile drawing shows 13 x 13 mm. Compare our drawing with your old seal if the exact size matters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eNo. It has no adhesive backing; bond it with a suitable contact adhesive where needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stay available?\u003c\/strong\u003e\u003cbr\u003eThe supplier is phasing this profile out, so stock is limited. If you need a lot, ask us before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I paint it?\u003c\/strong\u003e\u003cbr\u003eNo. Paint will crack as the sponge flexes. Clean it with mild soapy water.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure this is the right profile? Send us a photo of your old seal and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416129122683,"sku":"10003864","price":12.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/sponge-v-section-seal-12x12mm-fitting-90932dac-8fc2-46a6-a18c-b3d3da4b4933.jpg?v=1794563056"},{"product_id":"expanded-epdm-sponge-rubber-t-section-18mm-x-17mm-per-metre","title":"Expanded EPDM Sponge Rubber T-Section – 18mm x 17mm – Black Sponge – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA black expanded EPDM sponge T-section with a rounded crown and a 5 mm upright stem, roughly 18 mm wide and 17 mm high, sold by the metre.\u003c\/strong\u003e The soft sponge crown makes a neat finishing edge or a gentle cushion, while the stem locates it in a slot or gap.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eRounded T-section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded EPDM (sponge) rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003eApprox. 18 mm wide x 17 mm high (profile drawing: 19 x 16.5 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUpright stem\u003c\/th\u003e\n\u003ctd\u003eApprox. 5 mm thick, 10.5 mm below the crown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrown\u003c\/th\u003e\n\u003ctd\u003e7.5 mm flat top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.08 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTypical uses\u003c\/th\u003e\n\u003ctd\u003eDecorative edging, protective strip and sealing on classic cars, buses, caravans and more\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, in one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCode \/ SKU\u003c\/th\u003e\n\u003ctd\u003eSRS052 \/ 10006610\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy expanded EPDM sponge\u003c\/h3\u003e\n\u003cp\u003eExpanded EPDM is foamed during manufacture, so it is much softer and lighter than solid rubber and squashes easily to fill uneven gaps. It keeps the weather resistance of EPDM, so it copes with sun, rain and ozone without going hard.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThe number of metres you order of SRS052 sponge T-section, as one unbroken length\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the run.\u003c\/strong\u003e Measure the length you need and add a little for trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the slot.\u003c\/strong\u003e The stem is about 5 mm thick, so make sure the slot or gap suits it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the edge.\u003c\/strong\u003e Remove old rubber, dirt and burrs so the stem seats fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress it in.\u003c\/strong\u003e Start at one end and push the stem home with your thumbs, without stretching the sponge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish the ends.\u003c\/strong\u003e Cut square with a sharp blade and butt the ends neatly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the metres you need and it comes as one continuous length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it solid rubber?\u003c\/strong\u003e\u003cbr\u003eNo. It is expanded (sponge) EPDM, which is softer and lighter than solid section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do the sizes differ slightly?\u003c\/strong\u003e\u003cbr\u003eThe listed size is rounded. The profile drawing gives 19 mm wide by 16.5 mm high, which our diagram uses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. EPDM sponge is weather resistant.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure this is the right profile? Send us a photo of your old seal before you order and we will check it.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416129188219,"sku":"10006610","price":15.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10006610_render.png?v=1794527387"},{"product_id":"dual-hardness-rubber-extrusion-fits-volkswagen-t4-per-metre","title":"Dual Hardness Channel Seal with Sponge Bead – Fits Volkswagen T4 – EPDM \u0026 Sponge, Black, 14 x 10mm – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA firm black EPDM channel with an angled lip on top and a soft sponge bead underneath, listed by our supplier for the Volkswagen T4.\u003c\/strong\u003e The channel grips an edge; the sponge bead compresses to close the gap.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eVolkswagen T4 (as listed by the supplier); also a general door and window section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eDual hardness: firm EPDM channel with angled lip, sponge rubber bead below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM with sponge rubber bead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003eApprox. 14 mm high x 10 mm wide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChannel\u003c\/th\u003e\n\u003ctd\u003e6.5 mm high, approx. 4 mm opening at the top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSponge bead\u003c\/th\u003e\n\u003ctd\u003eApprox. 3.5 mm wide x 4.5 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.06 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eSRS149\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, cut as one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10006655\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy dual hardness\u003c\/h3\u003e\n\u003cp\u003eThe dense EPDM channel holds its shape and keeps a firm grip, while the sponge bead is soft enough to seal without making doors or windows hard to close. EPDM stands up well to sunlight, ozone and weather.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThe number of metres you order, supplied as one continuous length\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompare the profile.\u003c\/strong\u003e Hold our section drawing against your old seal to confirm the shape and sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the edge.\u003c\/strong\u003e Remove old rubber, adhesive and loose rust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart at one end.\u003c\/strong\u003e Press the channel fully onto the edge and work along the run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDon't stretch it.\u003c\/strong\u003e Ease it round bends so the bead keeps its full height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and test.\u003c\/strong\u003e Cut the end square and close the door or window to check the seal.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price for one metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the number of metres you need and it is cut as one length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere does it go on a T4?\u003c\/strong\u003e\u003cbr\u003eOur supplier lists this section for the T4 but does not say which opening. Compare the drawing with your old seal, or send us a photo and we will check.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs stock limited?\u003c\/strong\u003e\u003cbr\u003eYes. The supplier is phasing this profile out of regular stock, so availability is limited.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it on other vehicles?\u003c\/strong\u003e\u003cbr\u003eYes, it is also sold as a general door and window section for cars, caravans, buses and boats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bead hollow?\u003c\/strong\u003e\u003cbr\u003eThe drawing shows a sponge bead rather than a hollow tube; the sponge gives the soft seal.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right profile, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416130433403,"sku":"10006655","price":6.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/srs149-dual-hardness-channel-seal-fitting-6198638c-cc65-4340-81bb-ddf1456a696b.jpg?v=1794597438"},{"product_id":"dual-hardness-door-seal-fits-various-applications-per-metre","title":"Dual Hardness Door Seal, Double Sponge Bulb – Fits Classic Car, Caravan \u0026 Bus Doors – EPDM \u0026 Sponge, Black, 19 x 12.5mm – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA two-material door seal: a firm black EPDM base with twin channels, plus a soft double sponge bulb that closes the gap.\u003c\/strong\u003e The firm part holds the seal in place; the sponge does the sealing against doors, windows and hatches.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eDoors, windows and other openings: classic cars, caravans, buses, rail, marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eDual hardness: firm EPDM twin channel with a barbed centre leg, double hollow sponge bulb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM with sponge rubber bulb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003e19 x 12.5 mm on the profile drawing (supplier text: approx. 18 x 13 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSponge bulb\u003c\/th\u003e\n\u003ctd\u003e8 mm wide, two hollow lobes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChannel slot\u003c\/th\u003e\n\u003ctd\u003eApprox. 3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.11 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eSRS137\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, cut as one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10006648\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy dual hardness\u003c\/h3\u003e\n\u003cp\u003eOne rubber cannot both grip well and seal softly. Here the dense EPDM section keeps its shape so the seal stays put, while the sponge bulb squashes easily, so the door closes without force and still seals along uneven panels. EPDM copes well with sunlight, ozone and weather.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThe number of metres you order, supplied as one continuous length\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the profile.\u003c\/strong\u003e Compare our section drawing with your old seal before ordering; this is a general-purpose profile, not made for one vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the flange.\u003c\/strong\u003e Remove old seal, adhesive and loose rust so the base seats cleanly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit from one end.\u003c\/strong\u003e Seat the firm base fully along the run, easing it round corners rather than stretching it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace the bulb correctly.\u003c\/strong\u003e The sponge bulb should meet the closing door or panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and test.\u003c\/strong\u003e Cut the end square and close the door to check the seal line all round.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price for one metre?\u003c\/strong\u003e\u003cbr\u003eYes. Order the number of metres you need and it is cut as one length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eIt is a universal section rather than a model-specific part. Check the sizes on the drawing against your old seal, or send us a photo of the old profile.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the sponge black?\u003c\/strong\u003e\u003cbr\u003eYes, both the firm base and the sponge bulb are black.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it go round corners?\u003c\/strong\u003e\u003cbr\u003eGentle radii, yes. For tight corners, cut and butt-join the seal neatly rather than forcing it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need glue?\u003c\/strong\u003e\u003cbr\u003eThe firm base is designed to hold mechanically; on a worn or uneven flange a little suitable adhesive can help.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right profile, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416130466171,"sku":"10006648","price":8.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/dual-hardness-door-seal-double-sponge-bulb-fitting-2bc33808-db60-4855-9792-bc309fa7f3dd.jpg?v=1794562913"},{"product_id":"sponge-rubber-seal-fits-jaguar-e-type-per-metre","title":"Tailgate Sponge Rubber Seal, Hook Section – Fits Jaguar E-Type – Expanded EPDM, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA black expanded-EPDM sponge seal in a hook section for the Jaguar E-Type tailgate, sold by the metre.\u003c\/strong\u003e The soft sponge closes the gap round the tailgate to keep out rain, dust and draughts without making the tailgate hard to shut.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar E-Type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eTailgate seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eHook section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile size\u003c\/th\u003e\n\u003ctd\u003e20.0 mm wide × 18.0 mm high (±1.6 mm), from the supplier's profile data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded EPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM part number\u003c\/th\u003e\n\u003ctd\u003eBD23347\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eSRS115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.07 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004051\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy expanded EPDM\u003c\/h3\u003e\n\u003cp\u003eExpanded (sponge) EPDM is full of tiny air cells, so it squashes easily and springs back, giving a light, even seal along the whole tailgate. EPDM also stands up to sunlight, ozone and wet weather, so the seal stays soft instead of flattening and cracking.\u003c\/p\u003e\n\u003ch3\u003eLength \u0026amp; ordering\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold per metre:\u003c\/strong\u003e the price is for one metre. Order the number of metres you need.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece:\u003c\/strong\u003e if you order several metres they are supplied as one continuous length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure first:\u003c\/strong\u003e measure the run of your old seal and add a little for trimming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHook-section sponge seal, cut to the number of metres ordered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip the old seal.\u003c\/strong\u003e Remove the old seal and all traces of old adhesive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and dry.\u003c\/strong\u003e Clean the mounting face, treat any rust and let it dry fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry fit.\u003c\/strong\u003e Lay the new seal in place without stretching it and mark the length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFix it.\u003c\/strong\u003e Fit it the same way the original was held, working round steadily without pulling the sponge thin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the closing.\u003c\/strong\u003e Butt the ends neatly and check the tailgate closes evenly all the way round.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I need?\u003c\/strong\u003e\u003cbr\u003eMeasure the run of your old seal and order that many metres, plus a little for trimming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it one length or several pieces?\u003c\/strong\u003e\u003cbr\u003eSeveral metres come as one continuous length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size is the profile?\u003c\/strong\u003e\u003cbr\u003eThe supplier's profile data gives 20.0 mm wide by 18.0 mm high (±1.6 mm). Compare it with a cut end of your old seal before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used elsewhere on the car?\u003c\/strong\u003e\u003cbr\u003eIt is listed as the E-Type tailgate seal. If you want it for another position, ask us first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich part number does it replace?\u003c\/strong\u003e\u003cbr\u003eIt matches OEM part number BD23347.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right seal for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416136888699,"sku":"10004051","price":12.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/jaguar-e-type-tailgate-sponge-seal-fitting-945c4aee-ac0f-4bfc-895c-3cef3ea882bb.jpg?v=1794562450"}],"url":"https:\/\/industrial-polymers.co.uk\/collections\/other-shapes.oembed","provider":"Industrial-polymers ","version":"1.0","type":"link"}