{"title":"Triumph TR4","description":null,"products":[{"product_id":"windscreen-rubber-seal-fits-triumph-spitfire-mk1-mk2-mk3-tr4-tr5-tr6","title":"Front Windscreen Rubber – Fits Triumph Spitfire Mk1–Mk3, GT6 \u0026 TR4\/TR5\/TR6 – Black EPDM, Takes PT11 Filler – Each","description":"\u003cp\u003e\u003cstrong\u003eA replacement front windscreen rubber for the Triumph Spitfire Mk1 to Mk3, the GT6 and the TR4, TR5 and TR6, made in black EPDM as a reproduction of part 913442.\u003c\/strong\u003e The glass sits in one channel, the body flange in the other, and a separate chrome-finish PT11 filler strip locks the whole seal tight.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph Spitfire Mk1, Mk2 and Mk3; Triumph GT6; Triumph TR4, TR5 and TR6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eFront windscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eGlazing rubber with a filler-strip slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLocking method\u003c\/th\u003e\n\u003ctd\u003ePT11 chrome-finish PVC filler strip, about 4 m per car (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003e913442\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eES89\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 1.275 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003eEach (one windscreen rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eIP-CS-15435172249979\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\n\u003cp\u003eEPDM is a synthetic rubber chosen for glazing seals because it copes well with sunlight, ozone and wet weather, so the lips keep pressing on the glass and body rather than hardening and shrinking back from the corners.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × front windscreen rubber, black EPDM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAlso needed (sold separately):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/pvc-chrome-insert-fits-triumph-herald-toledo-dolomite-per-metre\"\u003ePT11 chrome-finish PVC windscreen insert\u003c\/a\u003e: order about 4 metres per car\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/glazing-strip-fitting-tool-fits-pvc-chrome-filler\"\u003eGlazing strip fitting tool\u003c\/a\u003e: makes feeding the filler strip much easier\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarm it first.\u003c\/strong\u003e A warm rubber and a warm filler strip are far easier to work, especially round the corners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the aperture.\u003c\/strong\u003e Remove old sealant and loose rust from the flange so the new rubber seats on a sound edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber onto glass.\u003c\/strong\u003e Lay the glass on a soft surface, work the rubber on all the way round, then run a cord in the flange channel with the ends overlapping at the bottom centre.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePull it in.\u003c\/strong\u003e Lubricate with soapy water, offer the screen up and pull the cord from inside while a helper presses gently on the glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock it.\u003c\/strong\u003e Feed the PT11 filler strip into its slot with the fitting tool, starting at the bottom centre, and trim the joint neatly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the filler strip included?\u003c\/strong\u003e\u003cbr\u003eNo. The rubber needs PT11 chrome-finish filler strip, sold per metre. Allow about 4 m per car.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same rubber for the Spitfire and the TR cars?\u003c\/strong\u003e\u003cbr\u003eYes. The supplier lists one front windscreen rubber for the Spitfire Mk1 to Mk3 and the TR4, TR5 and TR6, and two classic Triumph specialists list the same 913442 seal for the GT6 as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit a Spitfire Mk4 or 1500?\u003c\/strong\u003e\u003cbr\u003eIt is not listed for those cars. Send us a photo of your old rubber's cut end and we will check.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I reuse my old filler strip?\u003c\/strong\u003e\u003cbr\u003eIt is not recommended. Old strip is usually hard and shrunken, and fresh strip is what clamps the new rubber tight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a factory part?\u003c\/strong\u003e\u003cbr\u003eNo. It is an aftermarket reproduction made to replace Triumph part 913442.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right rubber for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416110870907,"sku":"IP-CS-15435172249979","price":86.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/es89_flatlay.jpg?v=1794505125"},{"product_id":"heater-feed-hose-fits-triumph-tr4-tr5-tr6","title":"Straight Heater Feed Hose – Fits Triumph TR4, TR5 \u0026 TR6 – EPDM with Kevlar, Black – Each","description":"\u003cp\u003e\u003cstrong\u003eA straight heater feed hose for the Triumph TR4, TR5 and TR6, made as a reproduction of OEM part 627310 in Kevlar-reinforced black EPDM.\u003c\/strong\u003e It carries hot coolant to the heater and replaces a perished or swollen original.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph TR4, TR5 and TR6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart\u003c\/th\u003e\n\u003ctd\u003eHeater feed hose, straight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM number\u003c\/th\u003e\n\u003ctd\u003e627310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eHOSE051\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eEPDM with Kevlar reinforcement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eQuality\u003c\/th\u003e\n\u003ctd\u003eAftermarket reproduction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003eEach (one hose)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004903\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM with Kevlar\u003c\/h3\u003e\n\u003cp\u003eEPDM copes well with hot coolant, heat and ozone, so it stays flexible far longer than the old rubber compounds. The Kevlar layer inside the wall adds strength, helping the hose hold its shape under pressure instead of ballooning.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 × straight heater feed hose (hose clips not included)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork cold.\u003c\/strong\u003e Let the engine cool completely and drain enough coolant to bring the level below the hose.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the old hose.\u003c\/strong\u003e Slacken the clips and ease the hose off; cut it off if it has bonded to the stubs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the stubs.\u003c\/strong\u003e Remove scale and old rubber so the new hose seals on bare metal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit and clip.\u003c\/strong\u003e Push the new hose fully home on each stub and tighten the clips evenly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefill and check.\u003c\/strong\u003e Top up the coolant, run the engine to temperature and check both ends for weeps.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a genuine Triumph part?\u003c\/strong\u003e\u003cbr\u003eNo. It is a good-quality aftermarket reproduction of OEM 627310.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it straight or shaped?\u003c\/strong\u003e\u003cbr\u003eIt is a straight length of hose.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre hose clips included?\u003c\/strong\u003e\u003cbr\u003eNo, only the hose is supplied. Reuse sound clips or fit new ones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it made from?\u003c\/strong\u003e\u003cbr\u003eBlack EPDM rubber with a Kevlar reinforcement layer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know it matches my car?\u003c\/strong\u003e\u003cbr\u003eCheck the OEM number 627310 against your parts list, or compare with your old hose. If unsure, contact us before ordering.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure this is the right hose? Contact us before ordering and we will help you check.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416114573691,"sku":"10004903","price":21.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10004903_gen_flatlay.jpg?v=1794500889"},{"product_id":"drainage-hose-fits-triumph-tr2-tr3-tr4-tr6","title":"Drainage Hose – Fits Triumph TR2, TR3, TR4 \u0026 TR6 – EPDM with Kevlar, Black – Each","description":"\u003cp\u003e\u003cstrong\u003eA replacement drainage hose for the Triumph TR2, TR3, TR4 and TR6, reproduced to OEM part 602057.\u003c\/strong\u003e A long, slim black EPDM hose with Kevlar reinforcement and one hooked end, supplied singly.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph TR2, TR3, TR4 and TR6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart\u003c\/th\u003e\n\u003ctd\u003eDrainage hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShape\u003c\/th\u003e\n\u003ctd\u003eLong, slim length with one hooked end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReinforcement\u003c\/th\u003e\n\u003ctd\u003eKevlar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM part no.\u003c\/th\u003e\n\u003ctd\u003e602057\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaker code\u003c\/th\u003e\n\u003ctd\u003eHOSE043\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003e1 hose (each)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004895\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM with Kevlar\u003c\/h3\u003e\n\u003cp\u003eEPDM resists water, ozone and weathering, so it does not go hard and split the way old drain tubes do. The Kevlar layer stiffens the wall and helps the hose resist kinking and collapse.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 × drainage hose for Triumph TR2, TR3, TR4 and TR6\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote the route.\u003c\/strong\u003e Photograph how the old hose runs and where it is clipped before removing it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the old hose.\u003c\/strong\u003e Ease each end off its spigot without forcing the outlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear the outlet.\u003c\/strong\u003e Remove dirt and debris so water can run freely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit the new hose.\u003c\/strong\u003e Push each end fully home and follow the original route, clear of hot or moving parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest.\u003c\/strong\u003e Pour a little water in at the top and check it drains with no kinks or leaks.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhich models does it fit?\u003c\/strong\u003e\u003cbr\u003eTR2, TR3, TR4 and TR6.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich OEM number does it replace?\u003c\/strong\u003e\u003cbr\u003e602057.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it supplied as a pair?\u003c\/strong\u003e\u003cbr\u003eNo, the price is for one hose.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre clips included?\u003c\/strong\u003e\u003cbr\u003eNo, the hose is supplied on its own.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right hose for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416114671995,"sku":"10004895","price":14.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10004895_flatlay.jpg?v=1794501655"},{"product_id":"bonnet-badge-fits-triumph-tr4","title":"Bonnet Shield Badge – Fits Triumph TR4 – Metal \u0026 Enamel, Dark Blue \u0026 Cream – Each","description":"\u003cp\u003e\u003cstrong\u003eA reproduction front shield badge for the bonnet of the Triumph TR4, in bright metal with dark blue and cream enamel.\u003c\/strong\u003e Made to Triumph part number 705950, it replaces a pitted, faded or missing original on the nose of the car.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph TR4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eFront of the bonnet (shield badge)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLettering\u003c\/th\u003e\n\u003ctd\u003eTR 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColours\u003c\/th\u003e\n\u003ctd\u003eDark blue and cream enamel, bright metal body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMetal with enamel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.094 kg (94 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTriumph part number\u003c\/th\u003e\n\u003ctd\u003e705950\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eBADGE28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003e1 badge (each)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eIP-CS-15435176542587\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy metal and enamel\u003c\/h3\u003e\n\u003cp\u003eThe TR4 shield is the first thing people look at on the car. A metal body with enamel colour panels keeps its shape and shine, and the colours stay deep rather than fading like paint or print.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × TR4 bonnet shield badge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo fixings are listed with the badge, so keep the originals from your old one.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the part.\u003c\/strong\u003e Compare the shape and part number with your old badge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtect the paint.\u003c\/strong\u003e Mask the bonnet round the badge before you start.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the old badge.\u003c\/strong\u003e Take it off carefully and note how it was held.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the area.\u003c\/strong\u003e Clean the mounting area and treat any corrosion found under the old badge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit the new badge.\u003c\/strong\u003e Secure it the same way as the original, tightening any fixings gently and evenly so the enamel is not stressed.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this an original Triumph part?\u003c\/strong\u003e\u003cbr\u003eNo. It is an aftermarket reproduction made to the 705950 pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat colours is the enamel?\u003c\/strong\u003e\u003cbr\u003eDark blue and cream, set in a bright metal body.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit other TR models?\u003c\/strong\u003e\u003cbr\u003eIt is listed for the TR4. Other TR models used different badges, so check your part number first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre fixings included?\u003c\/strong\u003e\u003cbr\u003eNo fixings are listed, so plan to reuse your originals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I keep it looking good?\u003c\/strong\u003e\u003cbr\u003eWash it with the car and dry it with a soft cloth. Avoid abrasive polish on the enamel.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right badge for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416115622267,"sku":"IP-CS-15435176542587","price":153.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/bonnet-badge-fits-triumph-tr4-gen_closeup.jpg?v=1794501270"},{"product_id":"pedal-set-fits-triumph-dolomite-accelerator-brake-clutch","title":"Pedal Rubber Set – Fits Triumph Dolomite (Brake, Clutch \u0026 Accelerator) – Black EPDM – Set of 3","description":"\u003cp\u003e\u003cstrong\u003eA set of three replacement pedal rubbers for the Triumph Dolomite: one each for the brake, clutch and accelerator, in black EPDM.\u003c\/strong\u003e These are the rubber pads that slip over the metal pedals, not the pedals themselves.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph Dolomite (manual, with clutch pedal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eContents\u003c\/th\u003e\n\u003ctd\u003e3 pedal rubbers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrake and clutch\u003c\/th\u003e\n\u003ctd\u003e2 x PEDAL05, OEM 150881\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAccelerator\u003c\/th\u003e\n\u003ctd\u003e1 x PEDAL12, OEM 152165\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 57 g (PEDAL05) and 48 g (PEDAL12) each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eQuality\u003c\/th\u003e\n\u003ctd\u003eAftermarket reproduction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003eOne set of three rubbers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\n\u003cp\u003eEPDM is a synthetic rubber that stands up well to wear, ageing and temperature swings, so the pads keep their grip pattern longer than worn originals.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x PEDAL05 rubbers (brake and clutch)\u003c\/li\u003e\n\u003cli\u003e1 x PEDAL12 rubber (accelerator)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMetal pedals are not included. Need just one? We also sell the \u003ca href=\"\/products\/accelerator-pedal-fits-triumph-dolomite\"\u003eDolomite accelerator rubber\u003c\/a\u003e and the \u003ca href=\"\/products\/foot-pedal-fits-triumph-stag-dolomite-clutch-brake-accelerator\"\u003ebrake\/clutch rubber\u003c\/a\u003e singly.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatch the rubbers.\u003c\/strong\u003e The two matching PEDAL05 rubbers go on the brake and clutch; the PEDAL12 goes on the accelerator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the old pad.\u003c\/strong\u003e Peel off the worn rubber and clean the metal pedal underneath.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase it on.\u003c\/strong\u003e Stretch the new rubber over the pedal, starting at one edge and working round.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the seating.\u003c\/strong\u003e Make sure no lip is folded underneath, then test each pedal by foot before driving.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre the metal pedals included?\u003c\/strong\u003e\u003cbr\u003eNo. This set is the three rubber pads only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are two of the rubbers the same?\u003c\/strong\u003e\u003cbr\u003eThe Dolomite brake and clutch use the same rubber (PEDAL05); the accelerator uses its own rubber (PEDAL12).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it suit an automatic Dolomite?\u003c\/strong\u003e\u003cbr\u003eAn automatic has no clutch pedal, so one of the PEDAL05 rubbers would be spare. You can buy the rubbers singly instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are they made of?\u003c\/strong\u003e\u003cbr\u003eBlack EPDM rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a Triumph original?\u003c\/strong\u003e\u003cbr\u003eNo. It is an aftermarket reproduction to the original part numbers 150881 and 152165.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure these are the right rubbers for your car, contact us before ordering and we will check for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416116605307,"sku":"c65d027b-b15f-4d73-9950-b1053c87f01f","price":38.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/pedalset_section.png?v=1794499217"},{"product_id":"foot-pedal-set-fits-triumph-stag-automatic","title":"Pedal Rubber Set – Fits Triumph Stag Automatic – Brake \u0026 Accelerator – EPDM, Black – Set of 2","description":"\u003cp\u003e\u003cstrong\u003eBoth pedal rubbers for the automatic Triumph Stag in one set: the wide automatic brake rubber and the accelerator rubber, moulded in black EPDM with a ribbed face.\u003c\/strong\u003e They fit over the existing pedals to bring back grip where the old rubbers have worn smooth or split. These are rubber pads, not complete pedals.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph Stag with automatic gearbox\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eContents\u003c\/th\u003e\n\u003ctd\u003eBrake and accelerator pedal rubbers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrake rubber\u003c\/th\u003e\n\u003ctd\u003ePEDAL01, OEM 150883, 0.134 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAccelerator rubber\u003c\/th\u003e\n\u003ctd\u003ePEDAL05, OEM 150881, 0.057 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFace\u003c\/th\u003e\n\u003ctd\u003eRibbed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eAftermarket reproduction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003eOne set of 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\n\u003cp\u003ePedal rubbers are pressed and scuffed every time you drive. EPDM holds its grip and flexibility and resists cracking with age, so the ribs keep working for longer.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × automatic brake pedal rubber (150883)\u003c\/li\u003e\n\u003cli\u003e1 × accelerator pedal rubber (150881)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed only the brake rubber? The \u003ca href=\"\/products\/brake-pedal-fits-triumph-stag\"\u003eStag automatic brake pedal rubber\u003c\/a\u003e is also sold on its own.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the old rubber.\u003c\/strong\u003e Peel it off and clean the pedal of dirt and loose rust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarm the new one.\u003c\/strong\u003e A minute or two in warm water makes it easier to stretch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoll it on.\u003c\/strong\u003e Hook one edge over the pedal and work the rest round with your thumbs until it is fully seated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry and check.\u003c\/strong\u003e Dry the pedal and make sure the rubber sits square and tight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest before driving.\u003c\/strong\u003e Try both pedals with the car stationary.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre these complete pedals?\u003c\/strong\u003e\u003cbr\u003eNo. They are the rubber pads that fit over your existing pedals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill they fit a manual Stag?\u003c\/strong\u003e\u003cbr\u003eNo. Manual cars have a clutch pedal and a narrower brake, so they need the \u003ca href=\"\/products\/manual-pedal-set-fits-triumph-stag-all-manual-models\"\u003emanual pedal rubber set\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many rubbers are in the set?\u003c\/strong\u003e\u003cbr\u003eTwo: one brake and one accelerator.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need glue?\u003c\/strong\u003e\u003cbr\u003eNormally not. The rubbers stretch over the pedal and hold by their own grip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich part numbers does it replace?\u003c\/strong\u003e\u003cbr\u003e150883 (automatic brake) and 150881 (accelerator).\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are unsure this set suits your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416116638075,"sku":"IP-CS-15435177361787","price":30.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/foot-pedal-set-fits-triumph-stag-automatic-photo-1.jpg?v=1794460062"},{"product_id":"manual-pedal-set-fits-triumph-stag-all-manual-models","title":"Pedal Rubber Set – Fits Triumph Stag Manual – Clutch, Brake \u0026 Accelerator – EPDM, Black – Set of 3","description":"\u003cp\u003e\u003cstrong\u003eA full set of three pedal rubbers for the manual-gearbox Triumph Stag: clutch, brake and accelerator, moulded in black EPDM with a ribbed face.\u003c\/strong\u003e They fit over your existing pedals to restore grip where the old rubbers have worn smooth, split or gone missing. These are the rubber pads, not complete metal pedals.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph Stag with manual gearbox\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eContents\u003c\/th\u003e\n\u003ctd\u003eClutch, brake and accelerator pedal rubbers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eClutch rubber\u003c\/th\u003e\n\u003ctd\u003ePEDAL02, OEM 150879, 0.087 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrake rubber\u003c\/th\u003e\n\u003ctd\u003ePEDAL02, OEM 150879, 0.087 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAccelerator rubber\u003c\/th\u003e\n\u003ctd\u003ePEDAL05, OEM 150881, 0.057 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eAftermarket reproduction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003eOne set of 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\n\u003cp\u003ePedal rubbers take constant pressure and scuffing from shoes. EPDM keeps its grip and flexibility and resists cracking with age, so the ribbed face stays useful for longer.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 × clutch \/ brake pedal rubbers (150879)\u003c\/li\u003e\n\u003cli\u003e1 × accelerator pedal rubber (150881)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed just one? The \u003ca href=\"\/products\/clutch-brake-pedal-fits-triumph-toledo-2000-2500\"\u003eclutch \/ brake pedal rubber (150879)\u003c\/a\u003e is also sold on its own.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the old rubber.\u003c\/strong\u003e Peel it off the pedal and clean away dirt and loose rust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarm the new one.\u003c\/strong\u003e A minute or two in warm water makes the rubber easier to stretch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoll it on.\u003c\/strong\u003e Hook one edge over the pedal, then work the rest round with your thumbs until it sits fully home.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry and check.\u003c\/strong\u003e Dry the pedal and make sure the rubber sits square and tight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest before driving.\u003c\/strong\u003e Try each pedal with the car stationary to confirm nothing catches.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre these complete pedals?\u003c\/strong\u003e\u003cbr\u003eNo. They are the rubber pads that fit over the existing pedals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill they fit an automatic Stag?\u003c\/strong\u003e\u003cbr\u003eNo. Automatics have a wider brake pedal and no clutch, so they need the \u003ca href=\"\/products\/foot-pedal-set-fits-triumph-stag-automatic\"\u003eautomatic pedal rubber set\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are the clutch and brake rubbers the same?\u003c\/strong\u003e\u003cbr\u003eOn the manual Stag both pedals take the same rubber, part 150879.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need glue?\u003c\/strong\u003e\u003cbr\u003eNormally not. The rubbers stretch over the pedal and hold by their own grip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many rubbers are in the set?\u003c\/strong\u003e\u003cbr\u003eThree: clutch, brake and accelerator.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are unsure this set suits your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416116670843,"sku":"2b246d3f-66ea-49e7-a130-f300d52ea067","price":21.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/2b246d3f-66ea-49e7-a130-f300d52ea067_1.jpg?v=1789259773"},{"product_id":"carburettor-diaphragm-fits-triumph-tr4","title":"Stromberg 175CD Carburettor Diaphragm – Fits Triumph TR4 \u0026 TR4A – Nitrile Rubber, Black – Each","description":"\u003cp\u003e\u003cstrong\u003eA replacement diaphragm for the Zenith-Stromberg 175CD carburettors used on the Triumph TR4 and TR4A, moulded in black nitrile rubber to OE pattern 512278.\u003c\/strong\u003e A split or perished diaphragm upsets how the piston rises, so a fresh one is a standard part of any Stromberg overhaul.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph TR4 and TR4A with Zenith-Stromberg 175CD carburettors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eInside the carburettor, under the top cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOE reference\u003c\/th\u003e\n\u003ctd\u003e512278\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eGSKT17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eMoulded diaphragm with outer bead, centre collar and locating tabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eNitrile rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e8 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003eEach (one diaphragm, for one carburettor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004684\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy nitrile\u003c\/h3\u003e\n\u003cp\u003eNitrile rubber is the usual choice for parts that live in fuel vapour and oil mist. It stays flexible where general-purpose rubbers swell or harden.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Stromberg 175CD carburettor diaphragm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSold each. A twin-carb engine needs one for each carburettor, so order two.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMark the cover.\u003c\/strong\u003e Mark the position of the top cover before removing it, then lift out the piston assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote the old one.\u003c\/strong\u003e See how the old diaphragm and its tabs sit before taking it off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit the new one.\u003c\/strong\u003e Fit it the same way round, with the tabs in their recesses and the outer bead seated all the way round.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefit evenly.\u003c\/strong\u003e Refit the cover in its marked position and tighten the screws evenly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck.\u003c\/strong\u003e Lift the piston and let it drop: it should move freely. Follow your workshop manual for tuning.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit SU carburettors?\u003c\/strong\u003e\u003cbr\u003eNo. This diaphragm is for Zenith-Stromberg 175CD carburettors only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many do I need?\u003c\/strong\u003e\u003cbr\u003eOne per carburettor. Twin-carb cars need two.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the TR4A?\u003c\/strong\u003e\u003cbr\u003eYes. It is listed for both the TR4 and TR4A with 175CD carburettors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it made from?\u003c\/strong\u003e\u003cbr\u003eBlack nitrile rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine Triumph part?\u003c\/strong\u003e\u003cbr\u003eNo, it is a quality aftermarket reproduction made to OE reference 512278.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure which carburettors your car has? Send us a photo before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416122110331,"sku":"10004684","price":43.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10004684_closeup.jpg?v=1794496057"},{"product_id":"seat-diaphragm-fits-triumph-tr4-tr5-tr6","title":"Seat Cushion Diaphragm – Fits Triumph TR4 (from CT20877), TR4A, TR5\/TR250 \u0026 TR6 – EPDM Rubber, Black – Each","description":"\u003cp\u003e\u003cstrong\u003eA replacement rubber diaphragm for the front seat cushion of the later Triumph TR4, TR4A, TR5\/TR250 and TR6, moulded in black EPDM and supplied with metal fitting hooks.\u003c\/strong\u003e It is the springy base the seat cushion rests on, so a sagging or split one is the usual reason a TR seat feels flat.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph TR4 from chassis CT20877, TR4A, TR5\/TR250, TR6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eFront seat cushion (base)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOE reference\u003c\/th\u003e\n\u003ctd\u003e612251\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eGSKT05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eOne-piece moulded rubber web with rows of holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM synthetic rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFixings\u003c\/th\u003e\n\u003ctd\u003eMetal fitting hooks supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.475 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003eEach (one diaphragm, for one seat)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10004671\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\n\u003cp\u003eEPDM keeps its stretch and resists ozone, heat and ageing far better than older natural-rubber blends, so the diaphragm keeps supporting the cushion instead of sagging or cracking after a few seasons.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × seat cushion diaphragm\u003c\/li\u003e\n\u003cli\u003eMetal fitting hooks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSold each. Order two to do both front seats.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip the seat.\u003c\/strong\u003e Take the seat out of the car and remove the cushion so the frame is bare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecord the old one.\u003c\/strong\u003e Photograph how the old diaphragm and its hooks sit before you remove them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the frame.\u003c\/strong\u003e Clean off rust and treat the frame where the hooks attach.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit and tension.\u003c\/strong\u003e Hook the new diaphragm in the same way as the old, working evenly round so it sits flat and level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRebuild.\u003c\/strong\u003e Refit the cushion and cover and check the seat sits evenly before refitting it to the car.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit an early TR4?\u003c\/strong\u003e\u003cbr\u003eIt is listed for the TR4 from chassis CT20877 onwards. If your car is earlier, send us the chassis number and we will check before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the hooks included?\u003c\/strong\u003e\u003cbr\u003eYes. Metal fitting hooks are supplied with the diaphragm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price for one or two?\u003c\/strong\u003e\u003cbr\u003eOne. Each diaphragm does one seat, so order two for both front seats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same for the TR250?\u003c\/strong\u003e\u003cbr\u003eYes, the TR5 and TR250 are both listed for this part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I reuse my old hooks?\u003c\/strong\u003e\u003cbr\u003eYou can if they are sound, but new hooks are included, so most people fit the new set.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right diaphragm for your seats, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416122143099,"sku":"10004671","price":70.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10004671_closeup.jpg?v=1794496037"},{"product_id":"windscreen-seal-fits-triumph-tr4","title":"Rear Screen Rubber, Hardtop \u0026 Surrey Top – Fits Triumph TR4, TR4A, TR5 \u0026 TR250 (1961–1968) – EPDM, Black, Takes PT11 Filler – Each","description":"\u003cp\u003e\u003cstrong\u003eThe rear window rubber for the Triumph TR4, TR4A, TR5 and TR250 hardtop and Surrey top, 1961–1968, in black EPDM.\u003c\/strong\u003e It holds the rear glass in the top and seals out rain and draughts, and is locked tight with a PT11 filler strip. This is the rear screen rubber, not the front windscreen seal.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph TR4, TR4A, TR5 and TR250, 1961–1968\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eRear window of the hardtop \/ Surrey top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOE number\u003c\/th\u003e\n\u003ctd\u003e902349\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLocking method\u003c\/th\u003e\n\u003ctd\u003ePT11 filler strip (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eResistance\u003c\/th\u003e\n\u003ctd\u003eUV, ozone and weathering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.31 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003e1 rubber (each)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eESBL10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10001210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\n\u003cp\u003eOld glazing rubbers harden and shrink in sunlight, which is when rear screens start to leak at the corners. EPDM stays supple in UV and ozone, so the lips keep their grip on the glass and the top.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 × rear screen rubber for the TR4–TR250 hardtop or Surrey top\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAlso needed (sold separately):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/pvc-chrome-insert-fits-triumph-herald-toledo-dolomite-per-metre\"\u003ePT11 PVC chrome filler insert\u003c\/a\u003e, priced per metre: measure round your rear window to work out how much you need\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/glazing-strip-fitting-tool-fits-pvc-chrome-filler\"\u003eGlazing strip fitting tool\u003c\/a\u003e: makes feeding the filler much easier\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarm it up.\u003c\/strong\u003e Leave the rubber somewhere warm before fitting so it is supple.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the aperture.\u003c\/strong\u003e Clean the flange in the top and remove all old rubber and sealer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber onto glass.\u003c\/strong\u003e Fit the rubber round the glass, then lay a strong cord in the flange channel with the ends crossing at the bottom.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePull it in.\u003c\/strong\u003e With a helper pressing gently from outside, pull the cord from inside so the lip rolls over the flange.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock it.\u003c\/strong\u003e Feed the PT11 filler into its groove with the fitting tool and butt the ends neatly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the front windscreen rubber?\u003c\/strong\u003e\u003cbr\u003eNo. It is for the rear window of the hardtop or Surrey top. The front screen uses a \u003ca href=\"\/products\/windscreen-rubber-seal-fits-triumph-spitfire-mk1-mk2-mk3-tr4-tr5-tr6\"\u003edifferent rubber\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the filler strip included?\u003c\/strong\u003e\u003cbr\u003eNo. PT11 filler is sold separately by the metre.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the TR5 and TR250?\u003c\/strong\u003e\u003cbr\u003eYes. The 902349 rear screen seal is listed for the TR4, TR4A, TR5 and TR250 hardtop and Surrey top.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need sealant?\u003c\/strong\u003e\u003cbr\u003eNot usually on a clean, sound flange. On a pitted or repaired aperture a non-setting glazing sealant is cheap insurance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan a glazier fit it?\u003c\/strong\u003e\u003cbr\u003eYes. Any mobile glazier familiar with filler-strip rubbers can fit it.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure which top you have, send us a photo before ordering.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416122175867,"sku":"10001210","price":108.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10001210_gen_flatlay.jpg?v=1794494319"},{"product_id":"sponge-section-seal-fits-jaguar-e-type-triumph-2000-2500-per-metre","title":"Dual-Hardness Sponge Seal – Fits Jaguar E-Type S1, Triumph TR4, 2000\/2500 \u0026 Stag – EPDM\/Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA two-part seal with a firm EPDM foot that locates in a metal channel and a soft black sponge head that squashes to seal.\u003c\/strong\u003e It is the profile used for the Jaguar E-Type Series 1 quarterlight and on several Triumphs, and it is sold by the metre.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eJaguar E-Type \/ XKE Series 1 quarterlight; Triumph TR4 door; Triumph 2000\/2500; Triumph Stag stowage seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eDual hardness: dense EPDM foot, expanded sponge head with internal slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003e16 mm wide x 17 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFoot\u003c\/th\u003e\n\u003ctd\u003e9.5 mm across the base, 6 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCatalogue size\u003c\/th\u003e\n\u003ctd\u003eApprox. 10 mm base, 15 mm overall height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eFoot pushes into a metal channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial \/ colour\u003c\/th\u003e\n\u003ctd\u003eEPDM and EPDM sponge, black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM references\u003c\/th\u003e\n\u003ctd\u003eBD20500\/4; Jaguar BD28434\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.1 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, in one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code \/ SKU\u003c\/th\u003e\n\u003ctd\u003eSRS071 \/ 10006612\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eDrawing sizes are taken from the supplier's profile drawing; the catalogue text quotes slightly smaller approximate figures.\u003c\/p\u003e\n\u003ch3\u003eWhy dual hardness\u003c\/h3\u003e\n\u003cp\u003eA single soft sponge would pull out of the channel, and a solid rubber would need too much force to close. The dense EPDM foot holds its grip in the channel while the sponge head compresses easily against the glass or panel. Both parts are EPDM, so they resist sunlight, ozone and weather.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eDual-hardness sponge seal, cut to the number of metres you order and supplied as one piece\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the channel\u003c\/strong\u003e and add about 100 mm for trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the channel.\u003c\/strong\u003e Pick out all old rubber and debris so the foot can seat fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart at one end.\u003c\/strong\u003e Press the dense foot into the channel and work along without stretching the seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse a blunt tool\u003c\/strong\u003e such as a plastic trim tool to push the foot home, never a screwdriver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and check.\u003c\/strong\u003e Cut a little long, butt the ends tight and close the panel or window to check the seal.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it priced?\u003c\/strong\u003e\u003cbr\u003ePer metre. Order 3 and you get a single 3 m length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich way up does it go?\u003c\/strong\u003e\u003cbr\u003eThe dense black foot goes into the channel; the sponge head faces the part that closes against it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need glue?\u003c\/strong\u003e\u003cbr\u003eIt is designed to be held by the channel. A small amount of suitable adhesive can help in a worn or opened-up channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the E-Type quarterlight seal?\u003c\/strong\u003e\u003cbr\u003eYes, this profile is listed for the Series 1 E-Type \/ XKE quarterlight, as well as the Triumph applications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut it?\u003c\/strong\u003e\u003cbr\u003eYes. Use a sharp knife and make a square cut.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right profile, send us a photo of your old seal's cut end before ordering.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416123289979,"sku":"10006612","price":11.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/jaguar-e-type-triumph-stag-sponge-seal-fitting-1e9ced40-9d44-4d5d-bc5d-a4687a140bec.jpg?v=1794564755"},{"product_id":"boot-seal-fits-triumph-tr4-tr5-tr6-per-metre","title":"Boot Lid Seal – Fits Triumph TR4, TR4A \u0026 TR5\/TR250 – Expanded EPDM Sponge, Black – Per Metre","description":"\u003cp\u003e\u003cstrong\u003eA reproduction of the Triumph boot lid seal, part number 613277, in black expanded EPDM sponge.\u003c\/strong\u003e The slotted profile pushes onto the boot opening edge, and the soft upper face cushions the lid and keeps rain out of the boot floor.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph TR4, TR4A and TR5\/TR250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eBoot lid opening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003e613277\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eUpper face with a raised step, open slot and soft lower lobe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003eApprox. 25 mm wide x 13 mm high (drawing: 24.5 x 13 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSlot\u003c\/th\u003e\n\u003ctd\u003e4 mm wide, 12.5 mm deep (supplier drawing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eExpanded EPDM sponge rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.18 kg per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePer metre, in one continuous length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10006618 (supplier code SRS094EP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhy expanded EPDM\u003c\/h3\u003e\n\u003cp\u003eOld boot seals harden and flatten, so the lid stops sealing and water collects on the boot floor. EPDM sponge resists sunlight, ozone and weather, and stays soft enough to compress as the lid closes without forcing the catch.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eBlack sponge boot lid seal, cut to the number of metres you order and supplied as one length\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the opening.\u003c\/strong\u003e Run a tape round the boot opening on the car and add a little for trimming before you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip and clean.\u003c\/strong\u003e Remove the old seal and all old glue, then treat any rust on the edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart at the bottom centre.\u003c\/strong\u003e Push the slot onto the edge and work round, easing it into the corners rather than stretching it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond if needed.\u003c\/strong\u003e A thin line of contact adhesive suitable for EPDM keeps it from creeping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoin and check.\u003c\/strong\u003e Cut the ends square, butt them together at the bottom, then close the lid and check it latches easily.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it sold?\u003c\/strong\u003e\u003cbr\u003eBy the metre. Measure your boot opening and order enough to go round it in one length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the TR6?\u003c\/strong\u003e\u003cbr\u003eParts catalogues do not agree on the TR6, so we list it for the TR4, TR4A and TR5\/TR250, where they do agree. If you have a TR6, compare our profile drawing with your old seal or send us a photo and we will advise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it suit a Spitfire?\u003c\/strong\u003e\u003cbr\u003eSome suppliers also list 613277 for early Spitfires. Compare our profile drawing with your old seal before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eNo. It is held by the slot on the edge; add a little contact adhesive if you want extra grip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I paint it?\u003c\/strong\u003e\u003cbr\u003eNo. Leave it unpainted and clean it with mild soapy water.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. Not sure it suits your car? Send us your model and year and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416128991611,"sku":"10006618","price":21.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10006618_render_3d.png?v=1794526523"},{"product_id":"differential-mounting-cup-polyurethane-bush-fits-triumph-models","title":"Differential Mounting Cup Bush – Fits Triumph 2000, 2500, Stag \u0026 TR4 – Polyurethane, Blue – Each","description":"\u003cp\u003e\u003cstrong\u003eA blue polyurethane differential mounting cup for the Triumph 2000, 2500, Stag and TR4, replacing part 134236.\u003c\/strong\u003e It works with the matching mounting cone to locate the differential, and polyurethane holds its shape where tired rubber lets the diff shift and clonk.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph 2000, 2500, Stag and TR4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eDifferential mounting (cup half)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM part no.\u003c\/th\u003e\n\u003ctd\u003e134236 PU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePartner part\u003c\/th\u003e\n\u003ctd\u003eMounting cone, BUSH10 (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShape\u003c\/th\u003e\n\u003ctd\u003eRound cup with a dished top face and a centre bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePolyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.079 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003e1 cup bush (each)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code \/ SKU\u003c\/th\u003e\n\u003ctd\u003eBUSH11 \/ 10000277\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy polyurethane\u003c\/h3\u003e\n\u003cp\u003ePolyurethane is firmer and longer-lasting than rubber in a mounting like this. It resists squashing out under load and is not softened by the odd drip of oil, so the differential stays where it should.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x polyurethane differential mounting cup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAlso needed (sold separately):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/differential-mounting-cone-fits-triumph-2000-2500-stag-tr4\"\u003eDifferential mounting cone, polyurethane (BUSH10)\u003c\/a\u003e: the cup is normally fitted with this cone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport the differential.\u003c\/strong\u003e Take its weight on a jack before undoing the mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the old parts.\u003c\/strong\u003e Undo the mounting nut and pull out the worn cup and cone, noting which way round they sat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the seat.\u003c\/strong\u003e Clear dirt and rust from the mounting so the new parts sit square.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit cone and cup.\u003c\/strong\u003e Fit them the same way round as the originals; a smear of suitable grease helps them seat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTighten.\u003c\/strong\u003e Lower the jack and tighten the nut to the figure in your workshop manual.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cone included?\u003c\/strong\u003e\u003cbr\u003eNo. This is the cup only. The matching cone, BUSH10, is linked above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many do I need?\u003c\/strong\u003e\u003cbr\u003eCheck how many mountings your car uses before you order; the price is for one cup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill polyurethane make the car harsher?\u003c\/strong\u003e\u003cbr\u003eIt is firmer than rubber, so you may notice slightly more feedback, but the differential is held more securely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it still available?\u003c\/strong\u003e\u003cbr\u003eOur supplier is phasing this part out and has limited stock left.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine part?\u003c\/strong\u003e\u003cbr\u003eIt is a quality aftermarket reproduction made in polyurethane.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right part for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416131875195,"sku":"10000277","price":24.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10000277_closeup.jpg?v=1794484859"},{"product_id":"clutch-brake-pedal-fits-triumph-toledo-2000-2500","title":"Clutch\/Brake Pedal Rubber – Fits Triumph Stag, 2000, 2500 \u0026 Toledo (Manual, OEM 150879) – Black EPDM – Each","description":"\u003cp\u003e\u003cstrong\u003eA replacement clutch or brake pedal rubber for manual Triumph Stag, 2000, 2500 and Toledo models, made to the 150879 pattern.\u003c\/strong\u003e Cross ribs and a moulded centre emblem give a firm footing, and the pad simply stretches over the pedal plate.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph Stag, 2000 and 2500; also listed for the Toledo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePedals\u003c\/th\u003e\n\u003ctd\u003eClutch and brake, manual-gearbox cars (one pad per pedal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM part no.\u003c\/th\u003e\n\u003ctd\u003e150879\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTread\u003c\/th\u003e\n\u003ctd\u003eCross ribs with a moulded centre emblem and raised rim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM synthetic rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.087 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003e1 pedal rubber (each)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplier code \/ SKU\u003c\/th\u003e\n\u003ctd\u003ePEDAL02 \/ 10005610\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\n\u003cp\u003eEPDM stays supple and grippy under wet shoes and footwell heat, and does not crack or glaze as quickly as the rubber the cars left the factory with.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x clutch or brake pedal rubber\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAlso available (sold separately):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/foot-pedal-fits-triumph-stag-dolomite-clutch-brake-accelerator\"\u003eMatching Triumph accelerator pedal rubber (PEDAL05)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the old pad.\u003c\/strong\u003e Peel it off the pedal plate, cutting it away if it has perished.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the plate.\u003c\/strong\u003e Clear rust and old rubber so the new pad sits flat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarm the new pad.\u003c\/strong\u003e Leave it somewhere warm or dip it in hot water so it stretches easily.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush it on.\u003c\/strong\u003e Hook one edge over the plate and roll the rest of the pad on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck it.\u003c\/strong\u003e Make sure it sits square with the emblem the right way up before you drive.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo I get one or two?\u003c\/strong\u003e\u003cbr\u003eOne. Order a quantity of 2 for both the clutch and brake.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit an automatic?\u003c\/strong\u003e\u003cbr\u003eIt is listed for manual-gearbox cars. Automatics use a different brake pedal pad.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit other Triumphs?\u003c\/strong\u003e\u003cbr\u003eThe supplier lists it for manual Triumphs generally, but some models, such as the Dolomite, are catalogued elsewhere with a different clutch and brake pad. Compare with your old pad or send us a photo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003eAbout 90 mm tall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the accelerator pad included?\u003c\/strong\u003e\u003cbr\u003eNo. The matching accelerator pad, PEDAL05, is sold separately and linked above.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right pad for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416132006267,"sku":"10005610","price":8.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10005610_flatlay.jpg?v=1794484779"},{"product_id":"differential-mounting-cone-fits-triumph-2000-2500-stag-tr4","title":"Differential Mounting Cone – Fits Triumph 2000, 2500, Stag \u0026 TR4 – Polyurethane, Blue – Each","description":"\u003cp\u003e\u003cstrong\u003eA blue polyurethane differential mounting cone for the Triumph 2000, 2500, Stag and TR4.\u003c\/strong\u003e Polyurethane is chosen here for performance and durability, and the cone is normally fitted together with its matching mounting cup.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph 2000, 2500, Stag and TR4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eDifferential mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eTapered cone with centre bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePolyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePartner part\u003c\/th\u003e\n\u003ctd\u003eMounting cup BUSH11 (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003e134235 PU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart code\u003c\/th\u003e\n\u003ctd\u003eBUSH10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.075 kg (75 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003e1 cone (each)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10000276\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhy polyurethane\u003c\/h3\u003e\n\u003cp\u003eRubber differential mounts on these cars are often tired, soft or split after decades of oil and load. This cone is made in polyurethane for performance and durability, so it is a longer-lasting replacement for a worn mount.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × polyurethane differential mounting cone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAlso needed (sold separately):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/differential-mounting-cup-polyurethane-bush-fits-triumph-models\"\u003eDifferential mounting cup, polyurethane bush (SKU 10000277)\u003c\/a\u003e: the cone is normally fitted with this cup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport it safely.\u003c\/strong\u003e Raise the car on axle stands and support the differential with a jack before undoing anything.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote the order.\u003c\/strong\u003e Undo the mounting bolt and remove the old cone and cup, noting which way round they sit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean up.\u003c\/strong\u003e Clean the mounting faces so the new parts seat squarely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit cone and cup.\u003c\/strong\u003e Fit them the same way round as the old parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTighten and check.\u003c\/strong\u003e Tighten the bolt to the figure in your workshop manual, then road test and recheck.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the mounting cup included?\u003c\/strong\u003e\u003cbr\u003eNo. The cone is sold on its own; the matching cup is listed separately (linked above).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich cars does it fit?\u003c\/strong\u003e\u003cbr\u003eThe Triumph 2000, 2500, Stag and TR4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat colour is it?\u003c\/strong\u003e\u003cbr\u003eBlue polyurethane.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine Triumph part?\u003c\/strong\u003e\u003cbr\u003eNo. It is a quality aftermarket polyurethane replacement (OEM reference 134235 PU).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price for one?\u003c\/strong\u003e\u003cbr\u003eYes, it is sold each.\u003c\/p\u003e\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right part for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416136200571,"sku":"10000276","price":16.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/differential-mounting-cone-fits-triumph-2000-2500-stag-tr4-workshop-photo.jpg?v=1794481264"},{"product_id":"differential-mounting-pad-fits-triumph-gt6-tr2-tr3-vitesse","title":"Differential Mounting Pad – Fits Triumph Spitfire, Herald, Vitesse, GT6, TR2, TR3, TR3A, TR4 \u0026 TR6 – Polyurethane, Black – Each","description":"\u003cp\u003e\u003cstrong\u003eA black polyurethane differential mounting pad that fits a wide range of Triumphs: Spitfire, Herald, Vitesse, GT6, TR2, TR3, TR3A, TR4 and TR6.\u003c\/strong\u003e Made as a polyurethane version of OEM part 131796PU.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph Spitfire, Herald, Vitesse, GT6, TR2, TR3, TR3A, TR4 and TR6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eDifferential mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShape\u003c\/th\u003e\n\u003ctd\u003eFlat pad with a centre hole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePolyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003e131796PU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.003 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003e1 pad (each)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10005398\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhy polyurethane\u003c\/h3\u003e\n\u003cp\u003ePolyurethane is chosen for mountings because it is tougher and more durable than ordinary rubber and resists oil and road grime well.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × polyurethane differential mounting pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork safely.\u003c\/strong\u003e Raise the car on stands and support the differential before undoing the mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the old pad.\u003c\/strong\u003e Undo the mounting and take out the old pad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the faces.\u003c\/strong\u003e Clean the faces the pad sits against so it beds down flat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit the new pad.\u003c\/strong\u003e Place it in the same position as the old one, with the hole lined up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTighten up.\u003c\/strong\u003e Refit the bolt and tighten it to the figure in your workshop manual.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow many do I get?\u003c\/strong\u003e\u003cbr\u003eOne pad, sold each. Check how many your car uses before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich cars does it fit?\u003c\/strong\u003e\u003cbr\u003eTriumph Spitfire, Herald, Vitesse, GT6, TR2, TR3, TR3A, TR4 and TR6.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it rubber?\u003c\/strong\u003e\u003cbr\u003eNo. It is black polyurethane.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the OEM number?\u003c\/strong\u003e\u003cbr\u003eIt is made to replace part 131796PU.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine Triumph part?\u003c\/strong\u003e\u003cbr\u003eNo. It is an aftermarket reproduction.\u003c\/p\u003e\n\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right pad for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416138264955,"sku":"10005398","price":10.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/10005398-section.png?v=1794477811"},{"product_id":"windscreen-seal-fits-triumph-spitfire-tr4-tr6","title":"Hood to Windscreen Rail Seal – Fits Triumph Spitfire, TR4 \u0026 TR6 – EPDM, Black – Each (1.14 m Length)","description":"\u003cp\u003e\u003cstrong\u003eThe seal that closes the gap between the soft top's front rail and the top of the windscreen frame on the Triumph Spitfire, TR4 and TR6.\u003c\/strong\u003e One 1.14 m length of black EPDM, made as a reproduction of OEM part 616187.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTriumph Spitfire, TR4 and TR6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eSoft top front rail to windscreen top rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSponge sealing body on a solid T-section foot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEPDM synthetic rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1.14 m, one piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOEM reference\u003c\/th\u003e\n\u003ctd\u003e616187\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003e1 length (each)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e10006659\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\n\u003cp\u003eThe front rail seal sits right on top of the screen, in full sun and rain every time the hood is up. EPDM copes with UV, ozone and weather far better than old natural-rubber seals, so the sponge stays springy and keeps pressing against the rail instead of going hard and flat.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × hood to windscreen rail seal, 1.14 m long\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep the old one.\u003c\/strong\u003e Remove the old seal and lay it next to the new one to confirm the profile and length match.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the channel.\u003c\/strong\u003e Scrape out old rubber, dirt and any rust so the foot can seat all the way down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarm it.\u003c\/strong\u003e A seal that has been somewhere warm is far easier to feed in than a cold one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeed in the foot.\u003c\/strong\u003e Start at one end and work the T-foot into the channel a little at a time, without stretching the seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the fit.\u003c\/strong\u003e Close and latch the hood and make sure the seal touches the rail along its whole length.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eQuestions buyers ask\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this sold per metre?\u003c\/strong\u003e\u003cbr\u003eNo. It is sold each, as one 1.14 m length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich cars does it fit?\u003c\/strong\u003e\u003cbr\u003eThe Triumph Spitfire, TR4 and TR6. If you are unsure about your car, send us the details and we will check before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere exactly does it go?\u003c\/strong\u003e\u003cbr\u003eBetween the front rail of the soft top and the top rail of the windscreen frame, where it stops wind and rain getting in over the screen.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e\u003cbr\u003eBlack EPDM synthetic rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine Triumph part?\u003c\/strong\u003e\u003cbr\u003eNo. It is an aftermarket reproduction of OEM part 616187.\u003c\/p\u003e\n\n\u003ch3\u003eDelivery \u0026amp; help\u003c\/h3\u003e\n\u003cp\u003eDispatched from the UK. Trade orders welcome. If you are not sure this is the right seal for your car, contact us before ordering and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56416138494331,"sku":"10006659","price":24.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/triumph-spitfire-tr4-tr6-soft-top-front-rail-seal-close-up-1c0e629a-ae01-489d-9cf8-3592ce8aff54.jpg?v=1794476708"}],"url":"https:\/\/industrial-polymers.co.uk\/collections\/triumph-tr4.oembed","provider":"Industrial-polymers ","version":"1.0","type":"link"}