{"product_id":"black-epdm-sponge-half-round-profile-10mm-x-5mm-per-metre","title":"EPDM Sponge Half Round Seal – 10mm x 5mm – 14m to 30m Lengths","description":"\u003cp\u003e\u003cstrong\u003eA soft, solid half-round seal in black EPDM sponge, 10 mm wide and only 5 mm high, cut in one continuous length from 14 m up to a full 30 m coil.\u003c\/strong\u003e The flat 10 mm back bonds down with adhesive, and the rounded crown squashes flat when a lid, panel or door closes on it. That makes a low, neat air and water seal that also cushions light knocks.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10 mm wide × 5 mm high, solid half round (R 5 mm crown), no hollow core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing:\u003c\/strong\u003e plain flat back; bond it with a rubber-compatible contact or instant adhesive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e expanded (sponge) EPDM, very soft at 40° Shore OO, 20 g per metre\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e -40 °C to +115 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoors:\u003c\/strong\u003e ozone, weather and UV resistance rated excellent; absorbs no more than 5% water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLengths:\u003c\/strong\u003e 14 m to 30 m in one piece, all at £12.15 per metre inc VAT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStock:\u003c\/strong\u003e held in stock in the UK and dispatched from stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLow-profile lid and door seals on electrical enclosures, control boxes and cabinets\u003c\/li\u003e\n\u003cli\u003eGlazing, closure and weather strips where only a 3 to 4 mm gap is available\u003c\/li\u003e\n\u003cli\u003eSeals on vehicle, trailer and caravan hatches and access panels\u003c\/li\u003e\n\u003cli\u003eSoft bump and impact strip along panel edges, shelves and equipment\u003c\/li\u003e\n\u003cli\u003eExpansion-joint infill and light anti-vibration packing\u003c\/li\u003e\n\u003cli\u003eGasket strip on electronics housings and instrument covers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-half-round-10mm-x-5mm-technical-drawing.png?v=1795220446\" alt=\"Technical drawing of the EPDM sponge half round: 10 mm wide flat base, 5 mm high, R5 crown, solid section\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProperty\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eTest method \/ basis\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eSolid half round on a flat base (no hollow core)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (across the flat base)\u003c\/td\u003e\n\u003ctd\u003e10.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal; tolerance BS 3734 Class E3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height (base to crown)\u003c\/td\u003e\n\u003ctd\u003e5.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal; tolerance BS 3734 Class E3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrown radius\u003c\/td\u003e\n\u003ctd\u003eR 5 mm\u003c\/td\u003e\n\u003ctd\u003eFollows from 10 mm width and 5 mm height of a true half round; not separately stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBonding face\u003c\/td\u003e\n\u003ctd\u003eFlat, 10 mm wide, plain (no adhesive tape)\u003c\/td\u003e\n\u003ctd\u003eManufacturer recommends fixing with a suitable adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eExpanded (sponge) EPDM\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e40° Shore OO\u003c\/td\u003e\n\u003ctd\u003eShore OO durometer scale (for soft foams); test standard not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e0.5 to 0.9 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e20 g\/m (0.02 kg per metre): about 0.28 kg for 14 m, 0.6 kg for 30 m\u003c\/td\u003e\n\u003ctd\u003eManufacturer product page and datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-40 °C to +115 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer product page (minimum and maximum temperature)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow-temperature flexibility\u003c\/td\u003e\n\u003ctd\u003ePass at -40 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing\u003c\/td\u003e\n\u003ctd\u003e±30% change after 7 days at 70 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; property measured not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e25% maximum (after 24 h recovery)\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; test temperature and standard not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003e5% maximum\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeather resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV light resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMould growth resistance\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength, elongation at break, tear strength\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need them\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eBS 3734 Class E3 (extruded sponge)\u003c\/td\u003e\n\u003ctd\u003eBS 3734\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied lengths\u003c\/td\u003e\n\u003ctd\u003eOne continuous piece, 14 m to 30 m (30 m = full coil)\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice per metre\u003c\/td\u003e\n\u003ctd\u003e£12.15\/m inc VAT at every length\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eThe manufacturer's datasheet mentions a 50 m coil; its product page gives a 30 m full coil, which is the longest single piece we supply. Sponge sections are flexible, so treat all sizes as nominal.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eExpanded (closed-cell sponge) EPDM. The manufacturer describes it as air and watertight and resistant to heat, ozone, weathering, steam, ketones and dilute acids and alkalis, with good electrical insulating properties. Like all EPDM it is not suited to oils, fuels or most solvents.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer does \u003cstrong\u003enot\u003c\/strong\u003e state any food-contact (FDA, EC 1935\/2004), drinking-water (WRAS), REACH, RoHS or fire-rating approval for this profile, so we do not claim any. If your job needs a certified material, ask us before you order.\u003c\/p\u003e\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-half-round-10mm-x-5mm-fitted-lid-seal.png?v=1795220447\" alt=\"Illustration of the 10 x 5 mm sponge half round glued to a frame and squeezed to a 3.5 mm gap by a closed lid\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:640px;height:auto\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the closed gap.\u003c\/strong\u003e It must be under 5 mm so the dome is squeezed. About 3 to 4 mm (20 to 40% squeeze) is a good starting point; this is our guidance, not a manufacturer figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the landing.\u003c\/strong\u003e The face you bond to should be flat and at least 10 mm wide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and dry.\u003c\/strong\u003e Wipe both surfaces with isopropyl alcohol and let them dry. Check your adhesive suits the frame material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond the back.\u003c\/strong\u003e Apply a thin, even film of contact or rubber-compatible instant adhesive and press the strip down along its length. Do not stretch it, or it will shrink back and open gaps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorners and joins.\u003c\/strong\u003e It bends round gentle corners; for tight corners cut and butt the ends, or mitre them. Glue the ends together for a fully sealed join.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAdd up every edge you want to seal and allow about 5% for trimming. A 600 × 400 mm enclosure lid takes 2 m, so 14 m does seven lids. Choose the length you need; each one comes as a single continuous piece.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-half-round-10mm-x-5mm-size-against-mm-rule.png?v=1795220447\" alt=\"True-scale view of the 10 x 5 mm sponge half round against a millimetre rule\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:640px;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhich profile do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProfile\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSize (W × H)\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEPDM sponge half round (this item)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e10 × 5 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eClosed gaps of about 3 to 4 mm, solid section\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-crown-strip-10mm-x-5mm-100m-coil\"\u003eEPDM sponge crown strip\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10 × 5 mm\u003c\/td\u003e\n\u003ctd\u003eSame footprint on a 100 m coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/sponge-section-half-round-12-5mm-x-6-25mm-black-per-metre\"\u003eEPDM sponge half round\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e12.5 × 6.25 mm\u003c\/td\u003e\n\u003ctd\u003eClosed gaps of about 4 to 5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-d-section-8mm-x-10mm-50m-coil\"\u003eEPDM sponge D section\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e8 × 10 mm\u003c\/td\u003e\n\u003ctd\u003eLarger gaps (6 to 8 mm), hollow, self-adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eData sheet\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-half-round-10mm-x-5mm-data-sheet.pdf?v=1795220447\" target=\"_blank\" rel=\"noopener\"\u003eDownload the technical data sheet (PDF): drawing, full specification and compliance\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre or per length?\u003c\/strong\u003e\u003cbr\u003ePer length. Pick 14 m to 30 m from the Length menu; each is one continuous piece priced at £12.15 per metre inc VAT. 30 m is a full coil.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is the minimum 14 m?\u003c\/strong\u003e\u003cbr\u003eIt is cut from a continuous coil, and 14 m is the shortest length we cut. Any spare keeps well in a cool, dark place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat gap will it seal?\u003c\/strong\u003e\u003cbr\u003eAny closed gap under its 5 mm height. Aim for 3 to 4 mm. For gaps of 4 to 5 mm the 12.5 × 6.25 mm half round is a better fit; for 6 to 8 mm use the 8 × 10 mm D section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eNo. The back is plain sponge, so you can choose an adhesive to suit the surface. A contact adhesive or a rubber-compatible instant adhesive works well on metal, wood and most rigid plastics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eA sharp craft knife or scissors gives a clean square end. Butt the ends tightly; for a fully sealed join, glue the ends together with instant adhesive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it go round corners?\u003c\/strong\u003e\u003cbr\u003eYes, it bends easily round gentle curves. For sharp 90° corners cut and butt the strip or mitre it, so it does not lift.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer gives -40 °C to +115 °C, and it passes a -40 °C flexibility test.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. The manufacturer rates its ozone, weather and UV resistance as excellent and mould resistance as very good.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stand up to oil or fuel?\u003c\/strong\u003e\u003cbr\u003eNo. EPDM handles water, steam, weather and dilute acids and alkalis well, but swells in oils, fuels and most solvents. Ask us for a neoprene or nitrile alternative.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food-safe or WRAS approved?\u003c\/strong\u003e\u003cbr\u003eNo approvals are stated for this profile, so do not use it where certified food-contact or drinking-water material is required.\u003c\/p\u003e\n\u003ch3\u003eDelivery and help\u003c\/h3\u003e\n\u003cp\u003eHeld in stock and dispatched from the UK. Trade and quantity orders welcome. Not sure it is the right profile? Call +44 1282 277786 or email sales@industrial-polymers.co.uk and we will check it for you.\u003c\/p\u003e\n","brand":"Industrial Polymers","offers":[{"title":"14 m","offer_id":56593496834427,"sku":"IP-EPDMS-10X5-14M","price":170.1,"currency_code":"GBP","in_stock":true},{"title":"15 m","offer_id":56593496867195,"sku":"IP-EPDMS-10X5-15M","price":182.25,"currency_code":"GBP","in_stock":true},{"title":"16 m","offer_id":56593496899963,"sku":"IP-EPDMS-10X5-16M","price":194.4,"currency_code":"GBP","in_stock":true},{"title":"17 m","offer_id":56593496932731,"sku":"IP-EPDMS-10X5-17M","price":206.55,"currency_code":"GBP","in_stock":true},{"title":"18 m","offer_id":56593496965499,"sku":"IP-EPDMS-10X5-18M","price":218.7,"currency_code":"GBP","in_stock":true},{"title":"19 m","offer_id":56593496998267,"sku":"IP-EPDMS-10X5-19M","price":230.85,"currency_code":"GBP","in_stock":true},{"title":"20 m","offer_id":56593497031035,"sku":"IP-EPDMS-10X5-20M","price":243.0,"currency_code":"GBP","in_stock":true},{"title":"21 m","offer_id":56593497063803,"sku":"IP-EPDMS-10X5-21M","price":255.15,"currency_code":"GBP","in_stock":true},{"title":"22 m","offer_id":56593497096571,"sku":"IP-EPDMS-10X5-22M","price":267.3,"currency_code":"GBP","in_stock":true},{"title":"23 m","offer_id":56593497129339,"sku":"IP-EPDMS-10X5-23M","price":279.45,"currency_code":"GBP","in_stock":true},{"title":"24 m","offer_id":56593497162107,"sku":"IP-EPDMS-10X5-24M","price":291.6,"currency_code":"GBP","in_stock":true},{"title":"25 m","offer_id":56593497194875,"sku":"IP-EPDMS-10X5-25M","price":303.75,"currency_code":"GBP","in_stock":true},{"title":"26 m","offer_id":56593497227643,"sku":"IP-EPDMS-10X5-26M","price":315.9,"currency_code":"GBP","in_stock":true},{"title":"27 m","offer_id":56593497260411,"sku":"IP-EPDMS-10X5-27M","price":328.05,"currency_code":"GBP","in_stock":true},{"title":"28 m","offer_id":56593497293179,"sku":"IP-EPDMS-10X5-28M","price":340.2,"currency_code":"GBP","in_stock":true},{"title":"29 m","offer_id":56593497325947,"sku":"IP-EPDMS-10X5-29M","price":352.35,"currency_code":"GBP","in_stock":true},{"title":"30 m (full coil)","offer_id":56593497358715,"sku":"IP-EPDMS-10X5-30M-COIL","price":364.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-half-round-10mm-x-5mm-black.png?v=1795220447","url":"https:\/\/industrial-polymers.co.uk\/products\/black-epdm-sponge-half-round-profile-10mm-x-5mm-per-metre","provider":"Industrial-polymers ","version":"1.0","type":"link"}