{"product_id":"black-pvc-self-grip-edge-trim-10-5mm-x-14-5mm-50m-coil","title":"PVC Self-Grip Edge Trim – 10.5mm x 14.5mm for 3mm to 5mm Panels – 50m Coil","description":"\u003cp\u003e\u003cstrong\u003eA black PVC push-on edge trim with a steel carrier, made for panel edges from 3 mm to 5 mm thick.\u003c\/strong\u003e It is 10.5 mm wide and 14.5 mm high, with a 12 mm deep channel and a 2.5 mm thick crown over the edge. A U-shaped steel strip runs through the PVC for its whole length and a gripping fin inside the channel folds onto the panel, so it holds by clamping force alone, with no glue. It covers sharp cut edges, protects the panel from knocks and leaves a neat rounded finish. It comes as one continuous 50 m coil and is in stock in the UK for same-day dispatch.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e sheet metal, plastic, fibreglass, glass and board edges 3 mm to 5 mm thick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10.5 mm wide × 14.5 mm high; 12 mm inside depth; 3 mm mouth before fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e flexible PVC, 70° Shore A, over a U-shaped steel carrier, 2.5 mm section\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip:\u003c\/strong\u003e internal gripping fin; push on by hand, no adhesive, and it can be removed and refitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking temperature:\u003c\/strong\u003e −10 °C to +60 °C, indoors or outdoors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e a 50 m coil in one piece, £506.58 inc VAT (about £10.13 per metre)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/self-grip-pvc-edge-trim-10-5x14-5mm-technical-drawing.png?v=1795304726\" alt=\"Technical drawing of self-grip PVC edge trim 10.5 x 14.5 mm: 10.5 mm wide, 14.5 mm high, 12 mm inside depth, 2.5 mm crown, 3 mm mouth for 3 to 5 mm panels, with steel carrier and single gripping fin\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eAll dimensions are in mm and nominal. The drawing is not to scale; the carrier and fin shapes are shown as typical.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ basis\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eSelf-gripping U edge trim with steel carrier and one internal gripping fin\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e10.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing and data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e14.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing and data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInside depth (grip depth)\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMouth opening (before fitting)\u003c\/td\u003e\n\u003ctd\u003e3 mm; the lips spread open over thicker panels\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel thickness it fits\u003c\/td\u003e\n\u003ctd\u003e3 mm to 5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer page and range data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSection thickness\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCover over the panel edge (crown)\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003ctd\u003eCalculated: 14.5 − 12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJacket material\u003c\/td\u003e\n\u003ctd\u003eFlexible PVC\u003c\/td\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarrier\u003c\/td\u003e\n\u003ctd\u003eSteel, U-shaped, full length\u003c\/td\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e70° Shore A\u003c\/td\u003e\n\u003ctd\u003eManufacturer data; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.35 to 1.45 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eManufacturer data; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eMore than 11 MPa\u003c\/td\u003e\n\u003ctd\u003eManufacturer data; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eMore than 260 %\u003c\/td\u003e\n\u003ctd\u003eManufacturer data; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum working temperature\u003c\/td\u003e\n\u003ctd\u003e−10 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum working temperature\u003c\/td\u003e\n\u003ctd\u003e+60 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eNot stated; dimensions are nominal\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it for carriage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied as\u003c\/td\u003e\n\u003ctd\u003eOne continuous 50 m coil\u003c\/td\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/self-grip-pvc-edge-trim-10-5x14-5mm-how-it-fits.png?v=1795304726\" alt=\"How the 10.5 x 14.5 mm self-grip edge trim fits on a 4 mm panel edge, with the lips spread and the fin folded onto the panel, plus four fitting steps\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the edge.\u003c\/strong\u003e Measure the panel: it must be 3 mm to 5 mm thick. Deburr it and wipe it clean and dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush on.\u003c\/strong\u003e Start at one end and press the trim fully home by hand, working along the edge. The lips open up over the panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat it.\u003c\/strong\u003e Tap along the top with a rubber or plastic mallet, especially on curves and corners. No glue is needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut and finish.\u003c\/strong\u003e Cut through the PVC and steel with heavy side cutters or a fine hacksaw. Butt the ends tightly together.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSharp edges of 3 mm to 5 mm steel and aluminium machine guards, enclosures and cabinets\u003c\/li\u003e\n\u003cli\u003eConveyor side guards and machine frames\u003c\/li\u003e\n\u003cli\u003eGarage door and shed panels\u003c\/li\u003e\n\u003cli\u003eFibreglass panels and marine equipment\u003c\/li\u003e\n\u003cli\u003ePlayground and leisure equipment, for safety edging\u003c\/li\u003e\n\u003cli\u003eVehicle interior side panels, side window edges, glass and furniture panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich edge trim do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePanel thickness\u003c\/th\u003e\n\u003cth\u003eBest match\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 mm to 1.5 mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/self-grip-pvc-edge-trim-5-5mm-x-8-5mm-profile-cut-to-length\"\u003eSelf-Grip PVC Edge Trim 5.5 × 8.5 mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 mm to 3 mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/pvc-edge-trim-9-5mm-x-14mm-fits-1mm-to-3mm-panels-50m-roll\"\u003eSelf-Grip PVC Edge Trim 9.5 × 14 mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e3 mm to 5 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eThis trim, 10.5 × 14.5 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.5 mm to 4.5 mm, cut to length\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/pvc-self-grip-edge-trim-10mm-x-13-5mm-3-5mm-to-4-5mm-panels-continuous-length\"\u003eSelf-Grip PVC Edge Trim 10 × 13.5 mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4 mm to 5 mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/pvc-self-grip-edge-trim-11mm-x-16-5mm-50m-coil\"\u003eSelf-Grip PVC Edge Trim 11 × 16.5 mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6 mm to 8 mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/pvc-self-grip-edge-trim-14mm-x-16-2mm-50m-coil\"\u003eSelf-Grip PVC Edge Trim 14 × 16.2 mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThe jacket is flexible PVC and the carrier is steel. The PVC resists weather, moisture and many common chemicals, which suits it to indoor and outdoor use within −10 °C to +60 °C. The manufacturer does not state any approvals (such as FDA, REACH or RoHS) for this profile, so we do not claim any. If you need a declaration for your project, contact us before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I fit it?\u003c\/strong\u003e\u003cbr\u003ePush it onto the clean edge by hand, starting at one end, then tap it home with a rubber mallet. The steel carrier and the inner fin grip the panel, so no glue or fixings are needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat panel thickness does it fit?\u003c\/strong\u003e\u003cbr\u003e3 mm to 5 mm. The 3 mm mouth spreads open as it goes on, so the steel carrier clamps the panel from both sides. On sheet thinner than 3 mm it will not grip firmly; see the table above for trims that fit other thicknesses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much will I get from one coil?\u003c\/strong\u003e\u003cbr\u003eOne 50 m coil in a single piece. Add up the length of every edge to be covered; for example, twenty guard panels with a 2.4 m top edge need 48 m, so one coil covers them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it go round corners and curves?\u003c\/strong\u003e\u003cbr\u003eYes. The steel carrier lets it bend around gentle curves and radiused corners and hold the shape. On a tight corner, tap it home with a mallet as you go. For a sharp 90° corner, cut it and butt the two ends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut through the PVC and the steel carrier with heavy side cutters or a fine-tooth hacksaw. There is no jointing piece; butt the cut ends tightly together on the edge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. The PVC jacket resists weather and moisture. Its working range is −10 °C to +60 °C, so it suits UK outdoor use but not hot areas such as engine bays or ovens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I remove it and use it again?\u003c\/strong\u003e\u003cbr\u003eYes. Because it holds by grip rather than adhesive, it can be pulled off and refitted, although the fin grips best the first time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a food-grade or certified material?\u003c\/strong\u003e\u003cbr\u003eNo approvals are stated for this profile. It is a general-purpose protective trim; ask us if you need a certified material.\u003c\/p\u003e\n\n\u003cp\u003eNeed help choosing? Call \u003ca href=\"tel:+441282277786\"\u003e+44 1282 277786\u003c\/a\u003e or email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56590439514491,"sku":"IP-PVCET-10.5X14.5-50M","price":506.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/black-pvc-self-grip-edge-trim-10-5mm-x-14-5mm-50m-coil-studio.jpg?v=1795062624","url":"https:\/\/industrial-polymers.co.uk\/products\/black-pvc-self-grip-edge-trim-10-5mm-x-14-5mm-50m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}