{"product_id":"black-tpe-expansion-joint-seal-15-5mm-x-13-2mm-25m-coil","title":"Black TPE Expansion Joint Seal – 15.5mm x 13.2mm – 25m Coil","description":"\u003cp\u003eA black TPE expansion joint seal for \u003cstrong\u003e10 mm to 12.5 mm wide joints\u003c\/strong\u003e. The 11.7 mm flat cap gives a level, low-profile top that wheels and feet roll straight over, and two pairs of flexible fins grip the joint walls below. The 5 mm central stem has two hollow chambers, so the seal squeezes as the joint closes and recovers as it opens. It is 15.5 mm across the lower fins and 13.2 mm deep overall. Supplied as a continuous \u003cstrong\u003e25 m coil\u003c\/strong\u003e (£23.36 per metre inc VAT), held in stock in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits joints 10–12.5 mm wide\u003c\/strong\u003e: fins 15.5 mm tip to tip are squeezed into the gap and hold it in by friction, with no adhesive needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat 11.7 mm cap\u003c\/strong\u003e: laps the joint edges in joints up to about 11.5 mm and sits flush inside wider ones, so it is not a trip hazard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwin hollow chambers\u003c\/strong\u003e in the stem let the seal follow joint movement without tearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTPV (PP\/EPDM) thermoplastic rubber\u003c\/strong\u003e, 70–72 Shore A, working range −50 °C to +90 °C\u003c\/li\u003e\n\u003cli\u003eResistant to weathering and UV, light (80 g\/m), and cuts cleanly with a sharp knife\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-expansion-joint-seal-15-5x13-2mm-technical-drawing.png?v=1795310560\" alt=\"Branded technical drawing of the TPE expansion joint seal 15.5 x 13.2 mm cross-section with all dimensions in mm\" width=\"2000\" height=\"1490\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ source\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (across lower fins, free state)\u003c\/td\u003e\n\u003ctd\u003e15.5 mm\u003c\/td\u003e\n\u003ctd\u003eSupplier drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height (cap top to foot)\u003c\/td\u003e\n\u003ctd\u003e13.2 mm\u003c\/td\u003e\n\u003ctd\u003eSupplier drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCap width (visible top face)\u003c\/td\u003e\n\u003ctd\u003e11.7 mm\u003c\/td\u003e\n\u003ctd\u003eSupplier drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody height below the cap\u003c\/td\u003e\n\u003ctd\u003e12.3 mm\u003c\/td\u003e\n\u003ctd\u003eSupplier drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCap thickness\u003c\/td\u003e\n\u003ctd\u003e≈0.9 mm (13.2 − 12.3)\u003c\/td\u003e\n\u003ctd\u003eDerived from the drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJoint \/ groove width it fits\u003c\/td\u003e\n\u003ctd\u003e10 mm min – 12.5 mm max\u003c\/td\u003e\n\u003ctd\u003eSupplier data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJoint depth needed\u003c\/td\u003e\n\u003ctd\u003eat least ≈12.5 mm (≈13.5 mm where the cap sits inside a joint wider than 11.7 mm)\u003c\/td\u003e\n\u003ctd\u003eDerived from the 12.3 mm body height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross-section\u003c\/td\u003e\n\u003ctd\u003eFlat cap, central stem with 2 hollow chambers, 2 pairs of angled fins, small locating foot\u003c\/td\u003e\n\u003ctd\u003eSupplier drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eThermoplastic elastomer, TPV type (PP\/EPDM)\u003c\/td\u003e\n\u003ctd\u003eSupplier datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e70–72 Shore A (product page 70°, datasheet 72°)\u003c\/td\u003e\n\u003ctd\u003eISO 868\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (specific gravity)\u003c\/td\u003e\n\u003ctd\u003e0.97 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eASTM D792 \/ ISO 1183\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e7.4 MPa\u003c\/td\u003e\n\u003ctd\u003eASTM D412 \/ ISO 37\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e450 %\u003c\/td\u003e\n\u003ctd\u003eASTM D412 \/ ISO 37\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set, 22 h at 70 °C\u003c\/td\u003e\n\u003ctd\u003e30 %\u003c\/td\u003e\n\u003ctd\u003eASTM D395 B \/ ISO 815\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set, 70 h at 125 °C\u003c\/td\u003e\n\u003ctd\u003e41 %\u003c\/td\u003e\n\u003ctd\u003eASTM D395 B \/ ISO 815\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003eNot published for this profile\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e−50 °C to +90 °C\u003c\/td\u003e\n\u003ctd\u003eSupplier datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e80 g per metre (≈2.0 kg per 25 m coil)\u003c\/td\u003e\n\u003ctd\u003eSupplier data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1:2014 class E2 (cross-section); L2 quoted for length\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied as\u003c\/td\u003e\n\u003ctd\u003e25 m continuous coil\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice per metre\u003c\/td\u003e\n\u003ctd\u003e£23.36 inc VAT (£583.95 per 25 m coil)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThe seal is extruded from a TPV, a thermoplastic vulcanisate made of polypropylene with cross-linked EPDM rubber. The EPDM gives the fins rubber-like recovery and weather and UV resistance. The polypropylene makes it light (SG 0.97), clean to cut and recyclable as a thermoplastic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApprovals:\u003c\/strong\u003e the manufacturer does not state any approvals for this profile in its written specification, so we make no FDA, food-contact, WRAS, REACH or RoHS claim. If your project needs a declaration, \u003ca href=\"\/pages\/contact\"\u003eask us\u003c\/a\u003e before ordering and we will request it.\u003c\/p\u003e\n\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-expansion-joint-seal-15-5x13-2mm-fitted-11mm-joint.png?v=1795310560\" alt=\"Illustration: cross-section of the 15.5 x 13.2 mm expansion seal pressed into an 11 mm joint between two concrete slabs, fins flexed against the joint walls and cap on the surface\" width=\"2000\" height=\"1490\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCheck the joint is 10–12.5 mm wide along its whole length, and at least about 12.5 mm deep.\u003c\/li\u003e\n\u003cli\u003eBrush and blow out dust, grit and loose concrete. The fins grip best on clean, sound arrises.\u003c\/li\u003e\n\u003cli\u003eStart at one end with the flat cap facing up. Push the foot and lower fins into the joint, then press the cap down until it is level with the surface. A rubber mallet or a wooden block helps.\u003c\/li\u003e\n\u003cli\u003eWork along the joint a short length at a time. Do not stretch the seal as you go, or it will shrink back and open gaps at the ends.\u003c\/li\u003e\n\u003cli\u003eCut to length with a sharp knife, leaving 1–2 mm extra so the ends butt tightly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-expansion-joint-seal-15-5x13-2mm-fit-range-10-12-5mm.png\" alt=\"Illustration: the seal drawn to scale in a 10 mm joint and a 12.5 mm joint, the narrowest and widest it fits\" width=\"2000\" height=\"1490\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eWhere it is used\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMovement joints in multi-storey and underground car park decks\u003c\/li\u003e\n\u003cli\u003eJoints between precast concrete panels, walls and slabs\u003c\/li\u003e\n\u003cli\u003eBridge decks and walkways with small joints\u003c\/li\u003e\n\u003cli\u003eRoof and podium joints, tunnels and service ducts\u003c\/li\u003e\n\u003cli\u003eWater and wastewater treatment plants, plant rooms and loading areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat joint width does it fit?\u003c\/strong\u003e\u003cbr\u003eJoints from 10 mm to 12.5 mm wide. Below 10 mm the fins cannot fold far enough to go in. Above 12.5 mm they do not grip the walls hard enough to hold the seal down. Measure the narrowest and widest points of the joint before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need adhesive?\u003c\/strong\u003e\u003cbr\u003eNo. The angled fins act like barbs: they flex upwards as you push the seal in and dig into the joint walls if anything tries to pull it out. On joints that see heavy traffic or water pressure, you can add a polyurethane or MS-polymer sealant bead along the arrises for extra security.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan vehicles drive over it?\u003c\/strong\u003e\u003cbr\u003eYes, as long as the joint is within the 10–12.5 mm range. The low flat cap stays level with the surface, which is why it suits car park decks. Tracked plant or steel-wheeled trolleys can damage any elastomer seal, so protect it during construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable outdoors and in cold weather?\u003c\/strong\u003e\u003cbr\u003eYes. The TPV material is rated from −50 °C to +90 °C and resists weathering and UV, so it stays flexible through a UK winter and on sun-exposed decks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut square with a sharp knife or fine-toothed saw. Butt the ends tightly, leaving 1–2 mm extra so they press together. At corners, mitre the cap at 45°. For a permanent bond, TPV can be heat-welded or joined with a cyanoacrylate made for polyolefins (use a primer).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it watertight?\u003c\/strong\u003e\u003cbr\u003eIt keeps out water, dirt and debris in normal use, but it is a compression seal, not a hydrostatic waterstop. For joints under constant water pressure, use it as the visible top seal over a proper waterstop or sealant system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much movement can it take?\u003c\/strong\u003e\u003cbr\u003eIt works across the full 10–12.5 mm joint range, so it takes about 2.5 mm of opening and closing between those limits. The hollow stem means the cap stays level while the fins flex.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it supplied and how fast is dispatch?\u003c\/strong\u003e\u003cbr\u003eAs one continuous 25 m coil (about 2 kg). It is held in stock, and orders placed by the cut-off on our dispatch message ship the same day.\u003c\/p\u003e\n\n\u003cp\u003eNeed help choosing a profile for your joint? Call \u003ca href=\"tel:+441282277786\"\u003e+44 1282 277786\u003c\/a\u003e or email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRelated products\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/black-tpe-expansion-joint-seal-16mm-x-18mm-25m-coil\"\u003eBlack TPE Expansion Joint Seal – 16mm x 18mm – 25m Coil\u003c\/a\u003e (for wider joints)\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Industrial Polymers","offers":[{"title":"25m coil","offer_id":56590427423099,"sku":"IP-TPEE-15.5X13.2-25M","price":583.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/black-tpe-expansion-joint-seal-15-5mm-x-13-2mm-25m-coil-studio.jpg?v=1795061806","url":"https:\/\/industrial-polymers.co.uk\/products\/black-tpe-expansion-joint-seal-15-5mm-x-13-2mm-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}