{"product_id":"black-tpe-expansion-joint-seal-16mm-x-18mm-25m-coil","title":"Black TPE Expansion Joint Seal – 16mm x 18mm – 25m Coil","description":"\u003cp\u003eA solid black TPE expansion joint seal for \u003cstrong\u003emovement joints 9 mm to 11 mm wide\u003c\/strong\u003e. The 16 mm cap sits on the surface and laps both joint edges, while two pairs of angled fins on a solid 4 mm stem grip the joint walls below, so it pushes in by hand and resists pulling out. It is 18 mm deep overall and 13 mm across the fin tips. Supplied as one continuous \u003cstrong\u003e25 m coil\u003c\/strong\u003e (£23.76 per metre inc VAT), held in stock in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits joints 9–11 mm wide\u003c\/strong\u003e: the 13 mm fin span is squeezed into the gap and holds by friction, with no adhesive needed in most joints\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 mm twin-wing cap\u003c\/strong\u003e covers the joint arrises and keeps out grit, water and debris\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid body\u003c\/strong\u003e, not hollow: rigid enough for foot and vehicle traffic over small joints\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTPV (PP\/EPDM) thermoplastic rubber\u003c\/strong\u003e, 70–72 Shore A, rated −50 °C to +90 °C\u003c\/li\u003e\n\u003cli\u003eWeather and UV resistant, 141 g per metre, cuts cleanly with a sharp knife\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-expansion-joint-seal-16x18mm-technical-drawing.png?v=1795315865\" alt=\"Technical drawing of the black TPE expansion joint seal 16 x 18 mm cross-section with all dimensions in mm\" width=\"2000\" height=\"1490\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ source\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCap width (overall width)\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003ctd\u003eSupplier drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height (cap top to foot)\u003c\/td\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003ctd\u003eSupplier drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth across fin tips (free state)\u003c\/td\u003e\n\u003ctd\u003e13 mm\u003c\/td\u003e\n\u003ctd\u003eSupplier drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFoot width\u003c\/td\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003ctd\u003eSupplier drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStem width\u003c\/td\u003e\n\u003ctd\u003e≈4.2 mm\u003c\/td\u003e\n\u003ctd\u003eMeasured from the drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCap thickness at the wings\u003c\/td\u003e\n\u003ctd\u003e≈2.5 mm\u003c\/td\u003e\n\u003ctd\u003eMeasured from the drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJoint \/ groove width it fits\u003c\/td\u003e\n\u003ctd\u003e9 mm min – 11 mm max\u003c\/td\u003e\n\u003ctd\u003eSupplier data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJoint depth needed\u003c\/td\u003e\n\u003ctd\u003eat least ≈16 mm\u003c\/td\u003e\n\u003ctd\u003eDerived from the drawing (depth below the cap)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross-section\u003c\/td\u003e\n\u003ctd\u003eSolid: twin-wing cap, central stem, 2 pairs of angled fins, flat foot\u003c\/td\u003e\n\u003ctd\u003eSupplier drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eThermoplastic elastomer, TPV type (PP\/EPDM)\u003c\/td\u003e\n\u003ctd\u003eSupplier datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e70–72 Shore A (product page 70°, datasheet 72°)\u003c\/td\u003e\n\u003ctd\u003eISO 868\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (specific gravity)\u003c\/td\u003e\n\u003ctd\u003e0.97 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eASTM D792 \/ ISO 1183\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e7.4 MPa\u003c\/td\u003e\n\u003ctd\u003eASTM D412 \/ ISO 37\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e450 %\u003c\/td\u003e\n\u003ctd\u003eASTM D412 \/ ISO 37\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set, 22 h at 70 °C\u003c\/td\u003e\n\u003ctd\u003e30 %\u003c\/td\u003e\n\u003ctd\u003eASTM D395 B \/ ISO 815\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set, 70 h at 125 °C\u003c\/td\u003e\n\u003ctd\u003e41 %\u003c\/td\u003e\n\u003ctd\u003eASTM D395 B \/ ISO 815\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003eNot published for this profile\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e−50 °C to +90 °C\u003c\/td\u003e\n\u003ctd\u003eSupplier datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e141 g per metre (≈3.5 kg per 25 m coil)\u003c\/td\u003e\n\u003ctd\u003eSupplier data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1:2014 class E2 (cross-section); L2 quoted for length\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied as\u003c\/td\u003e\n\u003ctd\u003e25 m continuous coil\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice per metre\u003c\/td\u003e\n\u003ctd\u003e£23.76 inc VAT (£594.00 per 25 m coil)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThe seal is extruded from a TPV, a thermoplastic vulcanisate of polypropylene with cross-linked EPDM rubber. The EPDM phase gives the fins rubber-like recovery and good resistance to weather, ozone and UV; the polypropylene keeps it light (SG 0.97), clean-cutting and recyclable as a thermoplastic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApprovals:\u003c\/strong\u003e the manufacturer's written specification does not state any approvals for this profile, so we make no FDA, food-contact, WRAS, REACH or RoHS claim. If your project needs a declaration, \u003ca href=\"\/pages\/contact\"\u003eask us\u003c\/a\u003e before ordering and we will request it.\u003c\/p\u003e\n\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-expansion-joint-seal-16x18mm-fit-range-9-11mm.png?v=1795315865\" alt=\"Illustration: the seal drawn to scale in 9 mm, 10 mm and 11 mm wide joints, the narrowest, middle and widest it fits\" width=\"2000\" height=\"1490\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCheck the joint is 9–11 mm wide along its whole length and at least about 16 mm deep.\u003c\/li\u003e\n\u003cli\u003eBrush and blow out dust, grit and loose concrete so the fins bite on clean, sound arrises.\u003c\/li\u003e\n\u003cli\u003eStart at one end with the cap facing up. Feed the foot and fins into the joint and press the cap down until it rests on both edges. A rubber mallet or wooden block helps in tight joints.\u003c\/li\u003e\n\u003cli\u003eWork along a short length at a time without stretching the seal, or it will shrink back and open gaps at the ends.\u003c\/li\u003e\n\u003cli\u003eCut to length with a sharp knife, leaving 1–2 mm extra so the ends butt tightly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eWhere it is used\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMovement joints in multi-storey and underground car park decks\u003c\/li\u003e\n\u003cli\u003eJoints between precast concrete panels, walls and floor slabs\u003c\/li\u003e\n\u003cli\u003eSmall joints in bridge decks, walkways and podiums\u003c\/li\u003e\n\u003cli\u003eRoof joints, tunnels and service ducts\u003c\/li\u003e\n\u003cli\u003eWater treatment plants, plant rooms and loading areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat joint width does it fit?\u003c\/strong\u003e\u003cbr\u003eJoints from 9 mm to 11 mm wide. Narrower than 9 mm and the fins cannot fold far enough to go in; wider than 11 mm and they no longer grip hard enough to hold the seal down. Measure the narrowest and widest points of the joint before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow deep does the joint need to be?\u003c\/strong\u003e\u003cbr\u003eAt least about 16 mm, so the stem and foot fit fully below the cap. The cap itself (about 2.5 mm thick) sits on top of the surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need adhesive?\u003c\/strong\u003e\u003cbr\u003eNot usually. The angled fins work like barbs: they fold up as the seal goes in and dig into the joint walls if anything tries to pull it out. On joints with heavy traffic or standing water you can add a bead of polyurethane or MS-polymer sealant along the edges for extra security.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan vehicles drive over it?\u003c\/strong\u003e\u003cbr\u003eYes, within the 9–11 mm range. The body is solid rather than hollow, so it supports the cap under wheels. Tracked plant and steel-wheeled trolleys can damage any elastomer seal, so protect it during construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable outdoors and in frost?\u003c\/strong\u003e\u003cbr\u003eYes. The TPV material is rated from −50 °C to +90 °C and resists weathering and UV, so it stays flexible through winter and on sun-exposed decks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut square with a sharp knife or fine-toothed saw and butt the ends tightly. Mitre the cap at 45° at corners. For a permanent joint, TPV can be heat-welded, or bonded with a cyanoacrylate made for polyolefins used with a primer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it watertight?\u003c\/strong\u003e\u003cbr\u003eIt keeps out water, dirt and debris in normal use, but it is a compression seal, not a hydrostatic waterstop. Under constant water pressure, use it as the visible top seal over a proper waterstop or sealant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it supplied and how fast is dispatch?\u003c\/strong\u003e\u003cbr\u003eAs one continuous 25 m coil, about 3.5 kg. It is held in stock and orders placed before the cut-off on our dispatch message ship the same day.\u003c\/p\u003e\n\n\u003ch3\u003eData sheet\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/black-tpe-expansion-joint-seal-16mm-x-18mm-25m-coil-data-sheet.pdf?v=1795061703\" target=\"_blank\" rel=\"noopener\"\u003eDownload the technical data sheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp\u003eNeed help choosing a profile for your joint? Call \u003ca href=\"tel:+441282277786\"\u003e+44 1282 277786\u003c\/a\u003e or email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRelated products\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/black-tpe-expansion-joint-seal-15-5mm-x-13-2mm-25m-coil\"\u003eBlack TPE Expansion Joint Seal – 15.5mm x 13.2mm – 25m Coil\u003c\/a\u003e (for 10–12.5 mm joints, low flat cap)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/tpe-expansion-seal-17-5mm-x-17mm-25m-roll\"\u003eTPE Expansion Seal – 17.5mm x 17mm – 25m Roll\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/expansion-seal-black-tpe-26mm-x-26mm-x-25m-for-19mm-to-23mm-grooves\"\u003eExpansion Seal, Black TPE, 26mm x 26mm – for 19mm to 23mm grooves\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56590426472827,"sku":"IP-TPEE-16X18-STD","price":594.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/black-tpe-expansion-joint-seal-16mm-x-18mm-25m-coil-studio.jpg?v=1795061706","url":"https:\/\/industrial-polymers.co.uk\/products\/black-tpe-expansion-joint-seal-16mm-x-18mm-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}