{"product_id":"black-tpe-p-profile-20mm-flange-x-8mm-hollow-bulb-25m-coil","title":"Black TPE P Profile Seal – 20mm Flange x 8mm Hollow Bead – 25m Coil","description":"\u003cp\u003eA black TPE P profile with a flat 20 mm fixing flange and a thin-walled 8 mm hollow bead. The 1 mm wall and 6 mm bore make the bead very easy to compress, so it closes small gaps on hatches, enclosure lids, cabinet doors and glazed panels where only light closing pressure is available. Supplied as one continuous 25 m coil, held in UK stock.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 20 mm overall width, Ø8 mm bead outside, Ø6 mm bore, 1 mm flange and wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e thermoplastic elastomer (TPE), black, non-marking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness:\u003c\/strong\u003e 60 Shore A (product listing); the manufacturer's datasheet quotes 70 Shore A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e −40 °C to +90 °C (datasheet: −35 °C to +90 °C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 25 m continuous coil, works out at about £18.41 per metre\u003c\/li\u003e\n\u003cli\u003eWaterproof, lightweight, easy to cut with a sharp knife, recovers its shape after repeated closing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-p-profile-20x8mm-technical-drawing.png?v=1795315581\" alt=\"Technical drawing of the TPE P profile 20 x 8 mm: 20 mm overall, 8 mm outside bead, 6 mm bore, 1 mm flange and wall\" width=\"100%\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eUnit\u003c\/th\u003e\n\u003cth\u003eTest method \/ source\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eP section: flat flange with round hollow bead\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (flange incl. bead)\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003emm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBead outside diameter (free height)\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003emm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBead bore (inside diameter)\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003emm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing (Ø6 x 8)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBead wall thickness\u003c\/td\u003e\n\u003ctd\u003e1 (derived: (8 − 6) ÷ 2)\u003c\/td\u003e\n\u003ctd\u003emm\u003c\/td\u003e\n\u003ctd\u003eCalculated from drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlange thickness\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003emm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing \/ data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlat flange beyond the bead\u003c\/td\u003e\n\u003ctd\u003e12 (derived: 20 − 8)\u003c\/td\u003e\n\u003ctd\u003emm\u003c\/td\u003e\n\u003ctd\u003eCalculated from drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil length\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003em\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eThermoplastic elastomer (TPE)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack, non-marking\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e60 (product listing) \/ 70 (datasheet)\u003c\/td\u003e\n\u003ctd\u003eShore A\u003c\/td\u003e\n\u003ctd\u003eManufacturer listing and datasheet (method not stated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003eMPa\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e340\u003c\/td\u003e\n\u003ctd\u003e%\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.09\u003c\/td\u003e\n\u003ctd\u003eg\/cm³\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e−40 to +90 (listing) \/ −35 to +90 (datasheet)\u003c\/td\u003e\n\u003ctd\u003e°C\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eClass E2 (cross-section), L2 (cut length)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003eNot published for this profile\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003eNot published for this profile\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eWhere the manufacturer's product listing and datasheet differ (hardness, lower temperature limit) both figures are shown. Design to the more cautious value.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eMade from a black thermoplastic elastomer: a rubber-like material that is waterproof, lightweight and non-marking, so it will not leave black streaks on painted steel, glass or light-coloured surfaces. No food-contact, potable-water or other regulatory approvals are stated for this black grade, so do not use it where certified food-contact material is required. A white food-contact grade of the same 20 x 8 mm size is available separately.\u003c\/p\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHatch and access-panel seals on machinery and equipment\u003c\/li\u003e\n\u003cli\u003eEnclosure door and lid seals where only light closing pressure is available\u003c\/li\u003e\n\u003cli\u003eGlass and sheet panel edge seals, and architectural\/window seals\u003c\/li\u003e\n\u003cli\u003eDraught, dust and splash seals on cabinet and cupboard doors\u003c\/li\u003e\n\u003cli\u003eSealing the gap between adjacent panels on fabricated steelwork\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-p-profile-20x8mm-fitted-illustration.png?v=1795315581\" alt=\"Illustration: section through a frame and door showing the 20 x 8 mm P profile open at 8 mm and squeezed to about 5.5 mm when closed\" width=\"100%\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFix the flat flange to the fixed frame so the bead meets a clean closing face on the door or lid.\u003c\/li\u003e\n\u003cli\u003eClean and degrease the fixing surface; bond the flange with a contact adhesive suitable for TPE, or hold it under a clamping strip, rivets or screws through the outer part of the flange.\u003c\/li\u003e\n\u003cli\u003eLay the profile in without stretching it; stretched seal shrinks back and opens gaps at the corners.\u003c\/li\u003e\n\u003cli\u003eAim for the bead to be squeezed by roughly a quarter to a third when closed – a closed gap of about 5–6 mm.\u003c\/li\u003e\n\u003cli\u003eAt corners, notch the flange so the bead can run round continuously, or mitre and bond the joint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eMeasure the full perimeter of each opening and add about 5% for trimming and corners. Example: four enclosure doors of 600 x 800 mm need 4 x 2.8 m = 11.2 m, plus 5% = about 11.8 m, so one 25 m coil covers them with spare.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the 8 mm bead hollow or solid?\u003c\/strong\u003e\u003cbr\u003eHollow. It has a 6 mm bore and a 1 mm wall, which is why it compresses with light pressure and suits doors and hatches that cannot be forced shut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat gap does it seal?\u003c\/strong\u003e\u003cbr\u003eAs a guide, a closed gap of about 5–6 mm, so the 8 mm bead is squeezed by a quarter to a third. For gaps of 7 mm or more choose a larger bead, such as our \u003ca href=\"\/products\/black-tpe-p-profile-28mm-flange-10-5mm-bulb-25m-coil\"\u003e28 x 10.5 mm P profile\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I fix the flange?\u003c\/strong\u003e\u003cbr\u003eBond it with a contact adhesive suitable for thermoplastic elastomers, or mechanically fix it under a clamping strip, rivets or screws. Always clean and degrease the surface first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe working range is −40 °C to +90 °C (the manufacturer datasheet quotes −35 °C as the lower limit). It is not suitable for oven doors or other hot surfaces above 90 °C; use a silicone P profile there.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut and join it?\u003c\/strong\u003e\u003cbr\u003eYes. Cut it square with a sharp knife or snips. Butt joints can be bonded with a cyanoacrylate adhesive suitable for TPE; for a continuous seal round a frame, notch the flange at the corners so the bead runs unbroken.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it mark painted surfaces or glass?\u003c\/strong\u003e\u003cbr\u003eNo. The compound is non-marking, so it will not leave black streaks on paint, powder coat or glass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. The material is waterproof and suits outdoor hatches and enclosures within its temperature range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this grade food safe?\u003c\/strong\u003e\u003cbr\u003eNo food-contact approval is stated for this black grade. Choose the \u003ca href=\"\/products\/white-tpe-p-seal-food-contact-grade-20mm-x-8mm-profile-25m-coil\"\u003ewhite food-contact grade 20 x 8 mm P profile\u003c\/a\u003e if you need certified food-contact material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy a shorter length?\u003c\/strong\u003e\u003cbr\u003eThis listing is the 25 m coil. \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e for cut lengths or larger quantities.\u003c\/p\u003e\n\u003cp\u003eNeed help choosing the right seal? \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e on +44 1282 277786 or sales@industrial-polymers.co.uk.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"25 m coil","offer_id":56590264009083,"sku":"IP-TPEP-20X8-STD","price":460.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/black-tpe-p-profile-20mm-x-8mm-hollow-bulb-25m-coil-studio.jpg?v=1795056136","url":"https:\/\/industrial-polymers.co.uk\/products\/black-tpe-p-profile-20mm-flange-x-8mm-hollow-bulb-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}