{"product_id":"black-tpe-square-u-channel-9mm-x-20mm-25m-coil","title":"TPE Square U Channel – 9mm x 20mm for 3mm Panels – 25m Coil","description":"\u003cp\u003eA tall, heavy-walled square U channel for capping the raw edges of 3mm sheet. The profile is 9mm wide and 20mm high, with a 3mm parallel slot running a full 17mm deep. The walls and base are each a solid 3mm thick, so the trim takes knocks and pressure without crushing, while the long 17mm arms clamp a deep band of each face and usually need no adhesive. It is extruded from black 60 Shore A thermoplastic elastomer (TPE), supplied as one continuous 25m coil, and held in stock.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-square-u-channel-9mm-x-20mm-technical-drawing.png?v=1795162968\" alt=\"Technical drawing of TPE square U channel 9mm x 20mm cross-section: 9mm wide, 20mm high, 3mm slot 17mm deep, 3mm walls and 3mm base, for 3mm panels\" width=\"1000\" height=\"745\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits sheet and panel edges 3mm thick\u003c\/li\u003e\n\u003cli\u003e9mm wide x 20mm high, 3mm slot 17mm deep\u003c\/li\u003e\n\u003cli\u003eUniform 3mm walls and base: about as rigid and crush-resistant as a trim this size gets\u003c\/li\u003e\n\u003cli\u003eDeep 17mm gripping arms hold each face, so glue is rarely needed\u003c\/li\u003e\n\u003cli\u003eFlat, square 9mm top gives a bold, protective finished edge\u003c\/li\u003e\n\u003cli\u003e60 Shore A TPE: resists UV, weathering, chemicals and repeated flexing\u003c\/li\u003e\n\u003cli\u003eCuts cleanly with a knife; fully recyclable thermoplastic\u003c\/li\u003e\n\u003cli\u003eBlack, 25m coil, about £21.01 per metre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCapping sharp edges on 3mm sheet-metal machine guards, covers and enclosure panels\u003c\/li\u003e\n\u003cli\u003eEdge finish on 3mm glazing, acrylic and polycarbonate screens\u003c\/li\u003e\n\u003cli\u003eRunning boards, steps and stair-edge panels where a knock-resistant edge matters\u003c\/li\u003e\n\u003cli\u003eVending machine, kiosk and display cabinet panels\u003c\/li\u003e\n\u003cli\u003eFurniture and shelving panels\u003c\/li\u003e\n\u003cli\u003eProtecting sheet stock edges during handling and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-square-u-channel-9mm-x-20mm-fitted-on-3mm-panel.png?v=1795162968\" alt=\"Fitting illustration: TPE square U channel 9mm x 20mm pushed onto a 3mm panel edge, gripping 17mm of each face\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\u003cp\u003eMeasure the edge you want to cover and match it to the slot. A square U channel should fit the panel snugly: too thin and it sits loose, too thick and it splays the arms. Several trims fit 3mm sheet; they differ in how tall the trim is and how deep it grips.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eU channel\u003c\/th\u003e\n\u003cth\u003eFits edge thickness\u003c\/th\u003e\n\u003cth\u003eChoose it when\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-square-u-channel-6mm-x-12mm-25m-coil\"\u003eTPE Square U Channel 6mm x 12mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e2mm\u003c\/td\u003e\n\u003ctd\u003eYour sheet is 2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-square-u-channel-7mm-x-12mm-for-3mm-panels-25m-coil\"\u003eTPE Square U Channel 7mm x 12mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003ctd\u003eYou want a compact, low-profile trim on 3mm sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/square-u-channel-black-tpe-7mm-x-18mm-25m-coil-for-3mm-panels\"\u003eTPE Square U Channel 7mm x 18mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003ctd\u003eYou want a deep grip with a narrower 7mm face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-square-u-channel-9mm-x-17mm-for-3mm-panels-50m-coil\"\u003eTPE Square U Channel 9mm x 17mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003ctd\u003eYou want a similar heavy trim on a 50m coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTPE Square U Channel 9mm x 20mm (this one)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003ctd\u003eYou want the deepest 17mm grip and 3mm walls on a 25m coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-square-u-channel-8mm-x-12mm-for-4mm-panels-25m-coil\"\u003eTPE Square U Channel 8mm x 12mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e4mm\u003c\/td\u003e\n\u003ctd\u003eYour sheet is 4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-square-u-channel-9mm-x-16mm-for-5mm-panels-25m-coil\"\u003eTPE Square U Channel 9mm x 16mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003ctd\u003eYour sheet is 5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ source\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eProfile and dimensions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eSquare-section U channel (push-on edge trim)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e9.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, ISO 3302-1 class E2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e20.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, ISO 3302-1 class E2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot width\u003c\/td\u003e\n\u003ctd\u003e3.0 mm, parallel sides\u003c\/td\u003e\n\u003ctd\u003eNominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot depth (gripping arm length)\u003c\/td\u003e\n\u003ctd\u003e17.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall thickness\u003c\/td\u003e\n\u003ctd\u003e3.0 mm each side\u003c\/td\u003e\n\u003ctd\u003eNominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase thickness under slot\u003c\/td\u003e\n\u003ctd\u003e3.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal (20 mm height less 17 mm arms)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits edge \/ panel (clamping range)\u003c\/td\u003e\n\u003ctd\u003e3 mm only\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eCross-section class E2, length class L2 (quality level 2)\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e141 g per metre, approx. 3.5 kg per 25 m coil\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eThermoplastic elastomer (TPE)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e60 Shore A\u003c\/td\u003e\n\u003ctd\u003eShore A durometer (ISO 48-4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e-25 °C to +70 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet (a wider -40 °C to +90 °C is also quoted; we list the more cautious datasheet figure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eUV, weathering, chemicals, flex fatigue; good tear and abrasion resistance\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity, tensile strength, elongation, tear, compression set\u003c\/td\u003e\n\u003ctd\u003eNot published for this profile; ask us if you need them\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSupply\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit of sale\u003c\/td\u003e\n\u003ctd\u003eOne continuous 25 m coil\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eHeld in stock\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial and compliance\u003c\/h3\u003e\u003cp\u003eTPE is a rubber-like material that is processed like a plastic. It gives a consistent, rubbery feel, needs no vulcanising, and can be recycled at end of life.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeathering:\u003c\/strong\u003e stable in sunlight and outdoor conditions, and resists ageing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistance:\u003c\/strong\u003e stands up to water, mild cleaning agents and general workshop exposure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTolerances:\u003c\/strong\u003e extruded to ISO 3302-1, the standard tolerance scheme for rubber and elastomer extrusions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNo food-contact, potable-water (WRAS), REACH\/RoHS or fire-rating approval is claimed for this profile. If you need a declaration for your file, \u003ca href=\"\/pages\/contact\"\u003econtact our team\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/tpe-square-u-channel-9mm-x-20mm-to-scale-on-machine-guard.png?v=1795162968\" alt=\"TPE square U channel 9mm x 20mm shown to scale along the top edge of a 600mm wide, 3mm machine guard panel\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\u003cp\u003eTotal the length of every edge you want to cover and add about 5% for trimming. Example: twenty 600mm x 400mm guard panels trimmed on all four sides have 40m of edge, or 42m with allowance, so order two 25m coils. Ten of the same panels (20m, 21m with allowance) fit on one coil.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCheck the panel really is 3mm: thinner sheet will sit loose, thicker sheet will splay the arms\u003c\/li\u003e\n\u003cli\u003eDeburr the edge and wipe it free of oil and grease before fitting\u003c\/li\u003e\n\u003cli\u003eStart at one end and press the channel on with your thumb as you work along; a soft mallet helps on long runs, as the 3mm walls are stiff\u003c\/li\u003e\n\u003cli\u003ePush the channel down until the panel edge seats against the base of the slot\u003c\/li\u003e\n\u003cli\u003eCut slightly over length with a sharp knife and push the ends together for a tight joint\u003c\/li\u003e\n\u003cli\u003eEase it round gentle curves; this tall, stiff section is best mitred or V-notched in the base at tight corners\u003c\/li\u003e\n\u003cli\u003eFor a permanent or vibration-proof fit, add a thin bead of sealant or adhesive in the slot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat edge thickness does it fit?\u003c\/strong\u003e\u003cbr\u003eIt is made for 3mm edges only. For 2mm sheet choose the 6mm x 12mm square U channel; for 4mm sheet choose the 8mm x 12mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it differ from the other 3mm square U channels?\u003c\/strong\u003e\u003cbr\u003eThis is the tallest and heaviest of them: 20mm high with 17mm arms and 3mm walls, so it grips deepest and protects best. The 7mm x 12mm is a slimmer, low-profile option, and the 9mm x 17mm is a similar heavy trim sold on a 50m coil.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need glue?\u003c\/strong\u003e\u003cbr\u003eNot usually. The 17mm sides grip a clean 3mm edge firmly on their own. Add adhesive only where there is heavy traffic, vibration, or you want it permanent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it go round curves and corners?\u003c\/strong\u003e\u003cbr\u003eIt follows gentle curves. Because the section is tall and stiff, mitre the channel or notch the base for a tight 90° corner so it folds neatly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable outdoors, and what temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eYes. TPE resists UV and weathering. The datasheet working range is -25°C to +70°C, so keep it away from ovens, exhausts and other hot surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eA sharp knife or fine-toothed saw gives a clean square cut. Butt the ends tightly; for a sealed joint, add a dab of instant adhesive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e\u003cbr\u003eBlack thermoplastic elastomer (TPE) at 60 Shore A: firm enough to protect, soft enough to push on by hand, and fully recyclable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food-safe?\u003c\/strong\u003e\u003cbr\u003eNo food-contact approval is claimed for this black TPE trim.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate are the dimensions?\u003c\/strong\u003e\u003cbr\u003eThe cross-section is extruded to ISO 3302-1 class E2, so allow a few tenths of a millimetre either way on the nominal sizes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen will it ship?\u003c\/strong\u003e\u003cbr\u003eThis trim is held in stock and ships in line with the dispatch times shown on this page.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy a shorter length?\u003c\/strong\u003e\u003cbr\u003eThis listing is a full 25m coil in black. For cut lengths or larger quantities, \u003ca href=\"\/pages\/contact\"\u003eask our team for a quote\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNeed help choosing an edge trim? \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e on +44 1282 277786 or sales@industrial-polymers.co.uk.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"25m coil","offer_id":56589879050619,"sku":"IP-TPEU-9X20X3-STD","price":525.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/black-tpe-square-u-channel-9mm-x-20mm-25m-coil-studio.jpg?v=1795012716","url":"https:\/\/industrial-polymers.co.uk\/products\/black-tpe-square-u-channel-9mm-x-20mm-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}