{"product_id":"embedded-roof-walkway-matting-liquid-applied-roof-coatings","title":"Embedded Roof Walkway Matting for Liquid-Applied Roofs – 6mm Open-Grid PVC Bonded into the Coating, R11 Slip Rated | 10m Rolls, 2 Widths, Grey or Yellow","description":"\u003ch2 class=\"hidden mb-8 text-3xl font-medium leading-snug tracking-tight text-gray-900 md:block\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eA walkway that becomes part of the roof — bedded into the liquid coating, so it cannot lift, creep or blow away, and the coating underneath is never walked on.\u003c\/span\u003e\u003c\/h2\u003e\n\u003cdiv class=\"mb-8 text-lg richtext story-text\"\u003e\n\u003cp\u003eLiquid-applied roofs are the easiest roofs to damage with foot traffic. The coating is thin, it softens in summer, and every trip to a plant unit grinds grit into it. A loose-laid walkway helps, but on a coated roof there is a better answer: a walkway that is embedded into the top coat while it is wet, so the mat and the roof cure into one surface.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mb-8 text-lg richtext story-text\"\u003e\n\u003cp\u003eThis is a 6mm open-grid PVC matting etched on both faces. The underside etching keys into the wet top coat; the top face gives an R11 slip-rated tread that stays clear because rain drains straight through the grid and evaporates. Once cured it is thermally stable, needs no fixings, and marks the safe route to every item of plant. Choose grey or yellow and a 0.6m or 0.91m wide 10m roll above. Longer rolls up to 50m are made to order.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mt-8\"\u003e\n\u003cdiv\u003e\n\u003ch4 class=\"glance-heading\"\u003eEMBEDS INTO THE COATING\u003c\/h4\u003e\n\u003cdiv class=\"richtext story-text\"\u003e\n\u003cp\u003eLaid into the wet top coat of the liquid roof system. The etched underside keys in, the coating rises through the open grid, and the mat becomes part of the roof. Nothing to lift, nothing to blow off.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4 class=\"glance-heading\"\u003eR11 GRIP, DRAINS THROUGH\u003c\/h4\u003e\n\u003cdiv class=\"richtext story-text\"\u003e\n\u003cp\u003eEtched top face rated DIN 51130 R11 with V10 drainage and ASTM F1677 1.0 dry \/ 0.8 wet. Rain runs through the grid rather than sitting on the tread.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4 class=\"glance-heading\"\u003ePROTECTS THE MEMBRANE\u003c\/h4\u003e\n\u003cdiv class=\"richtext story-text\"\u003e\n\u003cp\u003eBoots, ladder feet and toolboxes land on 6mm of flexible PVC instead of the coating. The mat contours to falls, upstands and uneven decks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4 class=\"glance-heading\"\u003eLIGHT AND QUICK TO FIT\u003c\/h4\u003e\n\u003cdiv class=\"richtext story-text\"\u003e\n\u003cp\u003e3.7 kg\/m², cut with a knife on site, rolled out and bedded in one visit as part of the coating works. No mechanical fixings and no penetrations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"mt-8 richtext story-text\"\u003e\n\u003ch4 class=\"glance-heading\"\u003eEMBEDDED OR LOOSE LAID?\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eEmbedded (this page)\u003c\/th\u003e\n\u003cth\u003e\u003ca href=\"\/products\/roof-wet-area-walkway-matting-14mm-open-lattice-pvc\"\u003eLoose-lay lattice\u003c\/a\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRoof type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLiquid-applied coatings, fitted during the coating works\u003c\/td\u003e\n\u003ctd\u003eSingle-ply PVC, felt, asphalt, metal deck, concrete — any finished roof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6mm, sits almost flush with the coating\u003c\/td\u003e\n\u003ctd\u003e14mm, sits on top of the membrane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFixing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBonded into the top coat, permanent\u003c\/td\u003e\n\u003ctd\u003eLoose laid, lifts for inspection and re-roofing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWind\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot a factor once embedded\u003c\/td\u003e\n\u003ctd\u003eStable to 60mph loose laid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSlip rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDIN 51130 R11\u003c\/td\u003e\n\u003ctd\u003eR10 standard, \u003ca href=\"\/products\/heavy-duty-roof-walkway-matting-r11-four-way-drainage\"\u003eR11 heavy-duty\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChoose it for\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNew or re-coated liquid roofs, exposed and windy sites, a walkway that must never move\u003c\/td\u003e\n\u003ctd\u003eExisting roofs, temporary routes, roofs that will be re-covered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eRule of thumb:\u003c\/strong\u003e if the roof is being coated or re-coated, embed the walkway now and it is there for the life of the coating. If the roof is already finished, take the loose-lay lattice instead. On TPO or EPDM single-ply, use the \u003ca href=\"\/products\/slip-resistant-walkway-mat-for-tpo-roofing-and-epdm-roof-membranes\"\u003eTPO walkway matting\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"mt-8 richtext story-text\"\u003e\n\u003ch4 class=\"glance-heading\"\u003eHOW MUCH DO I NEED?\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e10m x 0.6m roll\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCovers \u003cstrong\u003e6.0 m²\u003c\/strong\u003e. About 22 kg. Single-file access route — hatch to plant, plant to plant, gutter and outlet runs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e10m x 0.91m roll\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCovers \u003cstrong\u003e9.1 m²\u003c\/strong\u003e. About 34 kg. Room to pass and carry a toolbox, and for working areas in front of plant.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePlanning the route\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMeasure from the access point to every item of plant that gets a visit. Add a working area at each unit, typically 1m deep by the width of the unit. Round up to whole rolls and keep an offcut for ladder landings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLonger rolls\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eContinuous lengths up to 50m are made to order for long straight runs. Tell us the length and we will quote it.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCut lengths\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot listed here. Send us the lengths and we will price them cut to size.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"mt-8 richtext story-text\"\u003e\n\u003ch4 class=\"glance-heading\"\u003eCOLOURS\u003c\/h4\u003e\n\u003cp\u003eTwo stock colours, the same mat and the same price in each. Use the colour selector above to see each one in place.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYellow\u003c\/strong\u003e — the usual choice. Reads as a marked safe route from the hatch and from a distance, so visiting contractors follow it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrey\u003c\/strong\u003e — sits quietly on grey and white coatings where the roof is overlooked and the walkway should not dominate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"mt-8 richtext story-text\"\u003e\n\u003ch4 class=\"glance-heading\"\u003eWHICH ROOFS IS IT FOR?\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLiquid-applied roof systems\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eThis mat.\u003c\/strong\u003e Designed to be bedded into the wet top coat of most cold-applied liquid roofing systems. Confirm compatibility and the embedding sequence with your coating manufacturer before you start; we can help with that.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRe-coating an existing roof\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes. The walkway goes in with the new top coat, so the maintenance route is defined from day one.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinished roofs, no coating works planned\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTake the \u003ca href=\"\/products\/roof-wet-area-walkway-matting-14mm-open-lattice-pvc\"\u003eloose-lay roof walkway matting\u003c\/a\u003e instead.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTPO and EPDM single-ply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTake the \u003ca href=\"\/products\/slip-resistant-walkway-mat-for-tpo-roofing-and-epdm-roof-membranes\"\u003eTPO walkway matting\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"mt-8 richtext story-text\"\u003e\n\u003ch4 class=\"glance-heading\"\u003eTYPICAL APPLICATIONS\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaintenance routes across liquid-coated flat roofs to air-handling units, chillers and plant decks\u003c\/li\u003e\n\u003cli\u003eRoof hatch and ladder landing zones\u003c\/li\u003e\n\u003cli\u003eSolar PV array access paths on coated roofs\u003c\/li\u003e\n\u003cli\u003eGutter, outlet and rooflight inspection routes\u003c\/li\u003e\n\u003cli\u003eWorking areas in front of plant where engineers stand and set tools down\u003c\/li\u003e\n\u003cli\u003eExposed and high-level roofs where a loose-laid walkway would be at risk from wind\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"mt-8 richtext story-text\"\u003e\n\u003ch4 class=\"glance-heading\"\u003eTECHNICAL SPECIFICATION\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eComposition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFlexible polyvinyl chloride (PVC), non-porous, UV resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOne-piece open-grid moulding, etched surface on both the top and the underside\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6mm (1\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRoll sizes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10m x 0.6m (6.0 m²)  |  10m x 0.91m (9.1 m²). Lengths up to 50m to order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTolerances\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHeight ±0.5mm  |  length 0 \/ +0.3m  |  width ±1cm. All dimensions nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.70 kg\/m² (0.76 lb\/sq.ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColours\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGrey or yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSlip resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDIN 51130 R11, V10 drainage  |  DIN 51097 Class C  |  ASTM F1677 dry\/wet 1.0 \/ 0.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFire\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDIN 4102 Part 1 Class B2  |  BS 2782 Part 1 method 140A:1992 (ISO 1210:1992)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eService temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-23°C to +60°C. Thermally stable once embedded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUV\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eResistant to PVC degradation. Solar reflectance index (SRI) values available on request\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChemical\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eResistant to most acids, alkalis and oils — ask for the chemical resistance sheet if you need a specific check\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHygiene\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNon-porous PVC, naturally resistant to bacterial growth, with antimicrobial and antifungal additive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReversion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 2% thermoplastic shrinkage possible before embedding; once bedded into the coating the mat is dimensionally stable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFixing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEmbedded into the wet top coat of the liquid roof system. No adhesive, no mechanical fixings, no penetrations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnvironment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100% recyclable; contains no SVHC substances under REACH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"mt-8 richtext story-text\"\u003e\n\u003ch4 class=\"glance-heading\"\u003eFOR SPECIFIERS\u003c\/h4\u003e\n\u003cp\u003eSuggested clause: \u003cem\u003eEmbedded roof walkway matting, flexible PVC open-grid construction etched both faces, 6mm high, 3.7 kg\/m², slip resistance DIN 51130 R11 \/ DIN 51097 C \/ ASTM F1677 1.0 dry 0.8 wet, fire DIN 4102-1 B2, service temperature -23°C to +60°C, REACH SVHC free, bedded into the top coat of the liquid-applied roof system in accordance with the coating manufacturer's instructions. 10m rolls, [0.6 \/ 0.91]m wide, colour [grey \/ yellow].\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTell us the coating system, the route length and the number of plant items and we will return a marked-up quantity and the data sheet.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"mt-8 richtext story-text\"\u003e\n\u003ch4 class=\"glance-heading\"\u003eINSTALLATION\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlan the route first.\u003c\/strong\u003e Hatch to plant along the line people actually walk, with a working area at each unit. Mark it out on the roof before the top coat goes down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut to length dry.\u003c\/strong\u003e A sharp knife through the grid. Cut fractionally long to allow for up to 2% reversion; it is stable once embedded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply the top coat\u003c\/strong\u003e along the route to the coating manufacturer's wet film thickness, then lay the mat into it while the coat is wet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoll it in.\u003c\/strong\u003e Press the mat down so the coating rises through the grid and the etched underside is fully wetted. Add coating over the edges and any thin spots so the grid is locked in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButt joints, never overlap.\u003c\/strong\u003e Adjacent rolls butt tightly end to end; the coating bridges the joint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep off it until cured\u003c\/strong\u003e for the coating manufacturer's stated cure time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlways follow the coating manufacturer's instructions for embedding. Sequence and cure times vary between systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"mt-8 richtext story-text\"\u003e\n\u003ch4 class=\"glance-heading\"\u003eCLEANING \u0026amp; MAINTENANCE\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eRoutine:\u003c\/strong\u003e hose it down in place; a pressure washer clears grit from the grid. Non-porous PVC, nothing soaks in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnnual:\u003c\/strong\u003e walk the route with the roof inspection and check the coating around the edges of the run is intact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAfter works:\u003c\/strong\u003e sweep off screws, swarf and debris before they are trodden into the grid.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"mt-8 richtext story-text\"\u003e\n\u003ch4 class=\"glance-heading\"\u003eFREQUENTLY ASKED QUESTIONS\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquid roof coatings can it be embedded in?\u003c\/strong\u003e\u003cbr\u003eIt is designed for most cold-applied liquid roofing systems. Because coatings vary, confirm compatibility and the embedding method with your coating manufacturer before installation. Send us the system name and we will check with you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I lay it loose instead of embedding it?\u003c\/strong\u003e\u003cbr\u003eNo. At 6mm with an etched underside it is made to be bonded in. For a loose-laid walkway use the \u003ca href=\"\/products\/roof-wet-area-walkway-matting-14mm-open-lattice-pvc\"\u003e14mm open-lattice roof walkway matting\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes embedding damage the waterproofing?\u003c\/strong\u003e\u003cbr\u003eNo. The mat sits in the top coat, above the waterproof layers, with no fixings and no penetrations. It protects the coating from foot traffic rather than compromising it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it blow off?\u003c\/strong\u003e\u003cbr\u003eNot once embedded. It is bonded into the coating across its whole area, which is why it suits exposed and high-level roofs where loose-laid matting is at risk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it safe when wet?\u003c\/strong\u003e\u003cbr\u003eYes. The etched top face is rated R11 and water drains straight through the open grid. Clear snow and ice from any roof walkway before use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I get longer rolls or cut lengths?\u003c\/strong\u003e\u003cbr\u003eYes. Continuous lengths up to 50m are made to order, and we can cut lengths to size before dispatch.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"mt-8 richtext story-text\"\u003e\n\u003ch4 class=\"glance-heading\"\u003eNOT SURE WHAT YOU NEED?\u003c\/h4\u003e\n\u003cp\u003eSend us the coating system, the route length and the number of plant items. We will confirm the grade, the width, the colour and the number of rolls.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Industrial Polymers UK","offers":[{"title":"Grey \/ 0.6m × 10m roll","offer_id":56470559031675,"sku":"IPM-FLE-GRY-060-10M","price":481.85,"currency_code":"GBP","in_stock":true},{"title":"Grey \/ 0.91m × 10m roll","offer_id":56470559064443,"sku":"IPM-FLE-GRY-091-10M","price":721.46,"currency_code":"GBP","in_stock":true},{"title":"Yellow \/ 0.6m × 10m roll","offer_id":56470559097211,"sku":"IPM-FLE-YEL-060-10M","price":481.85,"currency_code":"GBP","in_stock":true},{"title":"Yellow \/ 0.91m × 10m roll","offer_id":56470559129979,"sku":"IPM-FLE-YEL-091-10M","price":721.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/embed-walkway-matting-yellow-inspector-straight-cc1e2eb9-a8df-4260-883f-5b8f72c80559.jpg?v=1790290392","url":"https:\/\/industrial-polymers.co.uk\/products\/embedded-roof-walkway-matting-liquid-applied-roof-coatings","provider":"Industrial-polymers ","version":"1.0","type":"link"}