{"product_id":"epdm-round-u-channel-7mm-x-7mm-1-6mm-panel-cut-length","title":"EPDM Round U Channel – 7mm x 7mm – Fits 1.6mm Panel – Black Rubber Edge Trim","description":"\u003cp\u003e\u003cstrong\u003eA solid black EPDM round U channel that pushes onto 1.6 mm sheet and panel edges and finishes them with a smooth, cushioned 7 mm bead.\u003c\/strong\u003e The section is a 7 mm round with a 1.6 mm slot cut 3 mm deep into it, so the panel edge is held between 2.7 mm side walls and capped by 4 mm of solid rubber. That makes it a tough bumper for sharp cut edges on sheet metal, plastic and thin glazing. EPDM stands up well to weather and ozone, so it works indoors and out. Choose any length from 15 m to 29 m in one continuous piece, or a full 30 m coil. It is in stock in the UK for same-day dispatch.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e sheet, panels and glazing 1.6 mm thick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 7 mm round (7 mm wide × 7 mm high); 1.6 mm slot, 3 mm deep; 2.7 mm side walls; 4 mm of rubber over the edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e solid EPDM rubber, 65–75° Shore A, black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrength:\u003c\/strong\u003e 10 MPa tensile, 500 % elongation, 50 kN\/m tear (manufacturer data)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeathering:\u003c\/strong\u003e no cracks after the manufacturer's 72 h ozone test; compression set 21 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLengths:\u003c\/strong\u003e 15 m to 29 m in 1 m steps, or a full 30 m coil. The full coil costs less than any length from 26 m up.\u003c\/li\u003e\n\u003cli\u003ePush-on fit with no tools. It cuts cleanly with a knife and is 100 % recyclable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-round-u-channel-7mm-x-7mm-technical-drawing.png?v=1795045377\" alt=\"Technical drawing of the EPDM round U channel: 7 mm diameter, 1.6 mm slot 3 mm deep, 2.7 mm side walls, 4 mm of rubber under the slot\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eAll dimensions are in mm and nominal. The 7 mm overall size, 1.6 mm slot and 3 mm slot depth are from the manufacturer's drawing. The 4 mm of rubber under the slot is 7 mm minus the 3 mm slot depth. The 2.7 mm side wall is the 7 mm width minus the 1.6 mm slot, split over two walls, and matches the manufacturer's stated 2.7 mm thickness. The drawing is not to scale.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ basis\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eRound U channel: solid 7 mm round section with a single slot\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (diameter)\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing and listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing and listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot (channel) width\u003c\/td\u003e\n\u003ctd\u003e1.6 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing and listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot depth (grip depth)\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSide wall thickness\u003c\/td\u003e\n\u003ctd\u003e2.7 mm each side\u003c\/td\u003e\n\u003ctd\u003eManufacturer (\"thickness 2.7 mm\"); matches (7 − 1.6) ÷ 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRubber over the edge (under the slot)\u003c\/td\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003ctd\u003eCalculated: 7 − 3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel thickness it fits\u003c\/td\u003e\n\u003ctd\u003e1.6 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSolid EPDM (ethylene propylene diene monomer)\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e65–75° Shore A (website), 65–75 IRHD ±5 (datasheet)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e10.0 MPa\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e500 %\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e50 kN\/m\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e21 %\u003c\/td\u003e\n\u003ctd\u003e22 h at 70 °C (manufacturer datasheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eNo cracks\u003c\/td\u003e\n\u003ctd\u003e72 h at 40 °C, 25 pphm (manufacturer datasheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: change in tensile strength\u003c\/td\u003e\n\u003ctd\u003e+9 %\u003c\/td\u003e\n\u003ctd\u003e70 h at 70 °C (manufacturer datasheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: change in elongation\u003c\/td\u003e\n\u003ctd\u003e0 %\u003c\/td\u003e\n\u003ctd\u003e70 h at 70 °C (manufacturer datasheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature range\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile. About −40 °C to +120 °C is typical for EPDM, not tested on this profile.\u003c\/td\u003e\n\u003ctd\u003eTypical for EPDM; ask us if you need a rated value\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.07 kg per metre\u003c\/td\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile; dimensions are nominal\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied as\u003c\/td\u003e\n\u003ctd\u003eOne continuous length, 15 m to 29 m, or a 30 m coil\u003c\/td\u003e\n\u003ctd\u003eChoose a length above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eLengths and prices\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003cth\u003ePrice inc VAT\u003c\/th\u003e\n\u003cth\u003ePer metre\u003c\/th\u003e\n\u003cth\u003eApprox. weight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e15 m\u003c\/td\u003e\n\u003ctd\u003e£172.26\u003c\/td\u003e\n\u003ctd\u003e£11.48\u003c\/td\u003e\n\u003ctd\u003e1.05 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e16 m\u003c\/td\u003e\n\u003ctd\u003e£183.75\u003c\/td\u003e\n\u003ctd\u003e£11.48\u003c\/td\u003e\n\u003ctd\u003e1.12 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e17 m\u003c\/td\u003e\n\u003ctd\u003e£195.24\u003c\/td\u003e\n\u003ctd\u003e£11.48\u003c\/td\u003e\n\u003ctd\u003e1.19 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e18 m\u003c\/td\u003e\n\u003ctd\u003e£206.70\u003c\/td\u003e\n\u003ctd\u003e£11.48\u003c\/td\u003e\n\u003ctd\u003e1.26 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e19 m\u003c\/td\u003e\n\u003ctd\u003e£218.19\u003c\/td\u003e\n\u003ctd\u003e£11.48\u003c\/td\u003e\n\u003ctd\u003e1.33 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20 m\u003c\/td\u003e\n\u003ctd\u003e£229.68\u003c\/td\u003e\n\u003ctd\u003e£11.48\u003c\/td\u003e\n\u003ctd\u003e1.40 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e21 m\u003c\/td\u003e\n\u003ctd\u003e£241.17\u003c\/td\u003e\n\u003ctd\u003e£11.48\u003c\/td\u003e\n\u003ctd\u003e1.47 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e22 m\u003c\/td\u003e\n\u003ctd\u003e£252.66\u003c\/td\u003e\n\u003ctd\u003e£11.48\u003c\/td\u003e\n\u003ctd\u003e1.54 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e23 m\u003c\/td\u003e\n\u003ctd\u003e£264.12\u003c\/td\u003e\n\u003ctd\u003e£11.48\u003c\/td\u003e\n\u003ctd\u003e1.61 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e24 m\u003c\/td\u003e\n\u003ctd\u003e£275.61\u003c\/td\u003e\n\u003ctd\u003e£11.48\u003c\/td\u003e\n\u003ctd\u003e1.68 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e25 m\u003c\/td\u003e\n\u003ctd\u003e£287.10\u003c\/td\u003e\n\u003ctd\u003e£11.48\u003c\/td\u003e\n\u003ctd\u003e1.75 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e26 m\u003c\/td\u003e\n\u003ctd\u003e£298.59\u003c\/td\u003e\n\u003ctd\u003e£11.48\u003c\/td\u003e\n\u003ctd\u003e1.82 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e27 m\u003c\/td\u003e\n\u003ctd\u003e£310.08\u003c\/td\u003e\n\u003ctd\u003e£11.48\u003c\/td\u003e\n\u003ctd\u003e1.89 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e28 m\u003c\/td\u003e\n\u003ctd\u003e£321.54\u003c\/td\u003e\n\u003ctd\u003e£11.48\u003c\/td\u003e\n\u003ctd\u003e1.96 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e29 m\u003c\/td\u003e\n\u003ctd\u003e£333.03\u003c\/td\u003e\n\u003ctd\u003e£11.48\u003c\/td\u003e\n\u003ctd\u003e2.03 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e30 m full coil\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e£297.00\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e£9.90\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.10 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eThe 30 m full coil works out at £9.90 per metre and costs less than any cut length from 26 m upwards, so if you need 26 m or more, take the coil.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThis profile is made from solid EPDM, a synthetic rubber known for its resistance to weather, ozone and UV. The manufacturer states that it is 100 % recyclable. The manufacturer does not state any food-contact (FDA, EC 1935\/2004), drinking-water (WRAS), fire-rating, REACH, RoHS or other product approvals for this profile, so we do not claim any. Do not use it where a certified material is required. Ask us for a certified alternative.\u003c\/p\u003e\n\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-round-u-channel-7mm-x-7mm-how-it-fits.png?v=1795045375\" alt=\"How the 7 x 7 mm EPDM round U channel fits over a 1.6 mm panel edge, with four fitting steps\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:700px;height:auto\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the edge.\u003c\/strong\u003e Deburr, clean and dry it, and check the sheet is about 1.6 mm thick (16 gauge steel is about this size).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush on.\u003c\/strong\u003e Start at one end or a corner and press the channel down along the edge with your thumb. You need no tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut and join.\u003c\/strong\u003e Cut slightly over-length with a sharp knife or shears, then push the ends together into a tight butt joint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond if needed.\u003c\/strong\u003e Where there is vibration, or where you need a sealed fit (for example round an aluminium window channel), run a bead of polyurethane or silicone sealant into the slot before fitting.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEdge protection on 1.6 mm sheet steel and aluminium, machine guards and enclosure panels\u003c\/li\u003e\n\u003cli\u003eFinishing the cut edges of thin acrylic, polycarbonate or hardboard panels around 1.5–1.6 mm thick\u003c\/li\u003e\n\u003cli\u003eKnock protection on vending machines, cabinets, shelving and furniture\u003c\/li\u003e\n\u003cli\u003eEdging thin glass or glazing panels and door edges\u003c\/li\u003e\n\u003cli\u003eSafety edging on stairs, running boards and exposed sheet edges where people brush past\u003c\/li\u003e\n\u003cli\u003eOutdoor trailers, kiosks and equipment covers, where EPDM's weather resistance helps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat thickness of panel does it fit?\u003c\/strong\u003e\u003cbr\u003eIt is made for 1.6 mm material. For slightly thinner sheet you can bond a thin rubber strip inside the slot to pack it out. For thicker material choose a channel with a wider slot. To make the finished edge wider, a neoprene strip can be bonded alongside it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy a round profile?\u003c\/strong\u003e\u003cbr\u003eThe solid 7 mm round puts 4 mm of rubber over the cut edge and leaves no corners to catch or peel. It gives a soft, rounded bumper that is kinder to hands and to anything that knocks against it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I work out what length I need?\u003c\/strong\u003e\u003cbr\u003eMeasure the sheet thickness with a caliper, and the total run of edge in metres. Add about 5 % for cutting. Choose the next length up. The shortest length is 15 m. If you need 26 m or more, take the full 30 m coil, because it is cheaper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stay on without glue?\u003c\/strong\u003e\u003cbr\u003eOn a clean 1.6 mm edge it grips by itself for most static uses. The slot is 3 mm deep, so on moving doors, vibrating machinery or outdoor parts, bond it with polyurethane or silicone sealant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. EPDM is one of the most weather-resistant rubbers. In the manufacturer's ozone test (72 h at 40 °C, 25 pphm) it showed no cracks, and heat ageing at 70 °C left its elongation unchanged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer does not give a temperature range for this profile. EPDM is typically used from about −40 °C to +120 °C, but that is a general figure for the material, not a tested rating for this part. If your application is near those limits, ask us first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut it with a sharp knife, shears or a fine-tooth saw for a square end. Butt the ends tightly together. For a sealed joint, bond the ends with a flexible adhesive or sealant. To go round a tight corner, notch the solid back of the channel slightly so it bends without lifting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it oil resistant?\u003c\/strong\u003e\u003cbr\u003eEPDM is not recommended for contact with mineral oils, petrol or diesel. For oily areas, ask us about a nitrile or neoprene channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe or WRAS approved?\u003c\/strong\u003e\u003cbr\u003eNo approvals are stated for this profile, so it should not be used where food-contact or drinking-water certification is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it in stock?\u003c\/strong\u003e\u003cbr\u003eYes. We hold it in stock and it is supplied as one continuous length cut to the size you choose, or as a full 30 m coil.\u003c\/p\u003e\n\n\u003ch3\u003eComplete your project\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-u-channel-9mm-x-9mm-1-6mm-panel-fit-cut-length\"\u003eEPDM U Channel – 9mm x 9mm – fits 1.6 mm panel (larger round bead)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-u-channel-4-5mm-x-9mm-black-rubber-edge-trim\"\u003eEPDM U Channel 4.5mm x 9mm – fits 1.6 mm panel (slimmer, deeper grip)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-rubber-u-channel-6mm-x-8-5mm-per-length\"\u003eEPDM U Channel 6mm x 8.5mm – fits 2 mm panel\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help choosing or fitting? Call \u003ca href=\"tel:+441282277786\"\u003e+44 1282 277786\u003c\/a\u003e, email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003econtact our team\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"15m","offer_id":56590237008251,"sku":"IP-EPDMU-7X7-15M","price":172.26,"currency_code":"GBP","in_stock":true},{"title":"16m","offer_id":56590237041019,"sku":"IP-EPDMU-7X7-16M","price":183.75,"currency_code":"GBP","in_stock":true},{"title":"17m","offer_id":56590237073787,"sku":"IP-EPDMU-7X7-17M","price":195.24,"currency_code":"GBP","in_stock":true},{"title":"18m","offer_id":56590237106555,"sku":"IP-EPDMU-7X7-18M","price":206.7,"currency_code":"GBP","in_stock":true},{"title":"19m","offer_id":56590237139323,"sku":"IP-EPDMU-7X7-19M","price":218.19,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":56590237172091,"sku":"IP-EPDMU-7X7-20M","price":229.68,"currency_code":"GBP","in_stock":true},{"title":"21m","offer_id":56590237204859,"sku":"IP-EPDMU-7X7-21M","price":241.17,"currency_code":"GBP","in_stock":true},{"title":"22m","offer_id":56590237237627,"sku":"IP-EPDMU-7X7-22M","price":252.66,"currency_code":"GBP","in_stock":true},{"title":"23m","offer_id":56590237270395,"sku":"IP-EPDMU-7X7-23M","price":264.12,"currency_code":"GBP","in_stock":true},{"title":"24m","offer_id":56590237303163,"sku":"IP-EPDMU-7X7-24M","price":275.61,"currency_code":"GBP","in_stock":true},{"title":"25m","offer_id":56590237335931,"sku":"IP-EPDMU-7X7-25M","price":287.1,"currency_code":"GBP","in_stock":true},{"title":"26m","offer_id":56590237368699,"sku":"IP-EPDMU-7X7-26M","price":298.59,"currency_code":"GBP","in_stock":true},{"title":"27m","offer_id":56590237401467,"sku":"IP-EPDMU-7X7-27M","price":310.08,"currency_code":"GBP","in_stock":true},{"title":"28m","offer_id":56590237434235,"sku":"IP-EPDMU-7X7-28M","price":321.54,"currency_code":"GBP","in_stock":true},{"title":"29m","offer_id":56590237467003,"sku":"IP-EPDMU-7X7-29M","price":333.03,"currency_code":"GBP","in_stock":true},{"title":"30m (full coil)","offer_id":56590237499771,"sku":"IP-EPDMU-7X7-30M-COIL","price":297.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-round-u-channel-7mm-x-7mm-black-end-view.png?v=1795045376","url":"https:\/\/industrial-polymers.co.uk\/products\/epdm-round-u-channel-7mm-x-7mm-1-6mm-panel-cut-length","provider":"Industrial-polymers ","version":"1.0","type":"link"}