{"product_id":"epdm-rubber-u-channel-12-8mm-x-21-5mm-4-8mm-panel-fit","title":"EPDM U Channel 12.8mm x 21.5mm – Round-Back Edge Trim for 4.8mm Panels – 5m to 30m","description":"\u003cp\u003e\u003cstrong\u003eA heavy, round-backed edge trim for 4.8 mm panels.\u003c\/strong\u003e This solid black EPDM U channel is 12.8 mm wide and 21.5 mm high, with a 4.8 mm slot. Its J-shaped section has one tall 21.5 mm leg and one short 11.5 mm leg joined by a thick, fully rounded back. The round back takes knocks on the edge, the tall leg covers a deep band on one face, and the tapered slot grips the panel. Choose one continuous length from 5 m to 29 m in 1 m steps, or a full 30 m coil. Every length is held in stock in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 4.8 mm panels:\u003c\/strong\u003e the 4.8 mm slot grips 4.8 mm (3\/16 in) sheet metal, glass, acrylic, polycarbonate, plywood or board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBig 12.8 × 21.5 mm bumper:\u003c\/strong\u003e a thick round back gives far more cushioning than a slim trim. The tall leg covers one face and the 11.5 mm short leg covers the other.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid EPDM, 65–75 Shore A:\u003c\/strong\u003e tensile strength 10 MPa, elongation at break 500%, tear strength 50 kN\/m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for outdoor use:\u003c\/strong\u003e no cracks after the 72 h ozone test. Good resistance to weathering, heat, cold, flexing and abrasion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo special tools:\u003c\/strong\u003e push on by hand and cut with a sharp knife. Bond with PU or silicone sealant for a permanent or sealed fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAny length from 5 m to 30 m:\u003c\/strong\u003e one continuous piece, 0.17 kg per metre. The 30 m full coil has the lowest price per metre.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-u-channel-12-8mm-x-21-5mm-technical-drawing.png?v=1795310782\" alt=\"Technical drawing of the EPDM U channel 12.8 x 21.5 mm: J-shaped round-back cross-section dimensioned 12.8 mm wide, 21.5 mm high, 11.5 mm short leg and 4.8 mm slot\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eNominal dimensions in mm. Overall width 12.8, overall height 21.5, short leg height 11.5 and slot width 4.8 are the manufacturer's figures. The manufacturer does not give wall or base thicknesses, so we do not quote them.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ source\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eRound-back U channel with one tall and one short leg (J section)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e12.8 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height (tall leg)\u003c\/td\u003e\n\u003ctd\u003e21.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShort (outer) leg height\u003c\/td\u003e\n\u003ctd\u003e11.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot (channel) width\u003c\/td\u003e\n\u003ctd\u003e4.8 mm, tapered inner channel\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing and data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits panel thickness\u003c\/td\u003e\n\u003ctd\u003e4.8 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSolid EPDM (ethylene propylene diene monomer)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e65–75 IRHD (±5), about 65–75 Shore A\u003c\/td\u003e\n\u003ctd\u003eIRHD, manufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e10 MPa\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e500%\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e50 kN\/m\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e21%\u003c\/td\u003e\n\u003ctd\u003e22 h at 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eNo cracks\u003c\/td\u003e\n\u003ctd\u003e72 h at 40 °C, 25 pphm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: change in tensile strength\u003c\/td\u003e\n\u003ctd\u003e+9%\u003c\/td\u003e\n\u003ctd\u003e70 h at 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: change in elongation at break\u003c\/td\u003e\n\u003ctd\u003e0%\u003c\/td\u003e\n\u003ctd\u003e70 h at 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.17 kg per metre (30 m coil about 5.1 kg)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLengths available\u003c\/td\u003e\n\u003ctd\u003e5, 6, 7 … 29 m, or a full 30 m coil (one continuous piece)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003eabout −40 °C to +120 °C, \u003cem\u003etypical for EPDM, not tested on this profile\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003eGeneral EPDM data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eNot stated; extruded rubber is normally made to ISO 3302-1 tolerance classes\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThis profile is extruded from a solid EPDM compound. EPDM resists weathering, ozone, UV and water, and stays flexible over time. The test results in the table come from the manufacturer's data sheet for this profile.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer does not state any food-contact, WRAS, REACH, RoHS or fire approval for this product, so we do not claim one. If your application needs a certified material, please contact us before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-u-channel-12-8mm-x-21-5mm-how-it-fits.png?v=1795310782\" alt=\"How it fits: section of the 12.8 x 21.5 mm EPDM U channel pushed onto a 4.8 mm panel edge, tall leg on one face and short leg on the other, with four fitting steps\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:640px;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eChoosing your length\u003c\/h3\u003e\n\u003cp\u003eAdd up the total length of edge to be covered and allow about 5% extra for cutting and joints. For example, a 4.8 mm panel of 1,200 × 600 mm edged all round needs 3.6 m, or about 3.8 m with allowance; two such panels need about 7.6 m, so choose 8 m. The price covers one continuous piece of the length you choose.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003cth\u003ePrice inc VAT\u003c\/th\u003e\n\u003cth\u003ePrice per metre\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e5 m\u003c\/td\u003e\n\u003ctd\u003e£211.38\u003c\/td\u003e\n\u003ctd\u003e£42.28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10 m\u003c\/td\u003e\n\u003ctd\u003e£422.73\u003c\/td\u003e\n\u003ctd\u003e£42.27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15 m\u003c\/td\u003e\n\u003ctd\u003e£634.11\u003c\/td\u003e\n\u003ctd\u003e£42.27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20 m\u003c\/td\u003e\n\u003ctd\u003e£845.46\u003c\/td\u003e\n\u003ctd\u003e£42.27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e25 m\u003c\/td\u003e\n\u003ctd\u003e£1,056.84\u003c\/td\u003e\n\u003ctd\u003e£42.27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e30 m full coil\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e£1,098.00\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e£36.60\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eNeed 26 m or more? The full 30 m coil costs less than the 26 m, 27 m, 28 m or 29 m lengths.\u003c\/p\u003e\n\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMachine guards, hoppers and enclosure panels made from 4.8 mm (3\/16 in) sheet\u003c\/li\u003e\n\u003cli\u003eProtective edge on 4.8 mm glass, acrylic and polycarbonate screens and guards\u003c\/li\u003e\n\u003cli\u003eVending machines, kiosks, shop fittings and furniture panels where a soft, rounded bumper is wanted\u003c\/li\u003e\n\u003cli\u003eStair nosings, steps, kick plates and running boards\u003c\/li\u003e\n\u003cli\u003eTrailer, van-racking and workshop shelving edges that take regular knocks\u003c\/li\u003e\n\u003cli\u003eBonded into aluminium channels as a push-in glazing or panel seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eDeburr and clean the edge. Check the panel is 4.8 mm thick.\u003c\/li\u003e\n\u003cli\u003eDecide which face the tall 21.5 mm leg goes on: it covers the deeper band, so put it on the side that needs most protection or that people see.\u003c\/li\u003e\n\u003cli\u003eStart at a corner and press the channel on by hand, working along the edge. A soft-faced mallet helps on long runs.\u003c\/li\u003e\n\u003cli\u003eOn outside corners, ease the trim round the bend. On tight corners, cut a small V-notch out of the legs.\u003c\/li\u003e\n\u003cli\u003eCut a few millimetres long with a sharp knife, then push the ends together into a tight butt joint.\u003c\/li\u003e\n\u003cli\u003eFor a sealed or permanent fit, run a bead of PU or silicone sealant into the slot first.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat panel thickness does it fit?\u003c\/strong\u003e\u003cbr\u003e4.8 mm panels (3\/16 in). On 4 mm or 4.5 mm sheet the grip will be looser: bond it with sealant, or choose a channel made for that thickness. A 5 mm or 6 mm edge will not fit this slot. To fit a thinner panel, the manufacturer suggests bonding a packing strip inside the slot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are the two legs different heights?\u003c\/strong\u003e\u003cbr\u003eThe tall 21.5 mm leg covers a deep band on one face, while the 11.5 mm leg keeps the other face neat and low. The thick round back between them is the bumper that takes the knocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I measure what I need?\u003c\/strong\u003e\u003cbr\u003eMeasure the panel thickness with a caliper first, then measure the total edge length in metres and round up. Allow about 5% extra for cuts and joints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it used for?\u003c\/strong\u003e\u003cbr\u003eEdge protection on 4.8 mm sheet metal, glass, plastic and wooden panels: machine guards, doors, vending machines, stairs, shelving and glazing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. EPDM is chosen for outdoor use because it resists weathering and ozone. This compound passed a 72 h ozone test with no cracks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer has not published a temperature range for this profile. EPDM is typically used from about −40 °C to +120 °C, but this has not been tested on this profile. The compound did pass heat ageing for 70 h at 70 °C with little change in properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eUse a sharp knife or heavy shears and cut square. Butt the ends together tightly. For a sealed joint, add a little cyanoacrylate glue or sealant to the cut faces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it go round corners?\u003c\/strong\u003e\u003cbr\u003eIt follows gentle curves. Because the back is thick, sharp outside corners are neater if you notch the legs from the inside, or cut and butt-join the ends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it soft or firm?\u003c\/strong\u003e\u003cbr\u003eAt 65–75 Shore A it is medium-firm: soft enough to absorb knocks, and firm enough to hold its shape and grip the panel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is the 30 m coil cheaper than 26 m to 29 m?\u003c\/strong\u003e\u003cbr\u003e30 m is a full, uncut coil, so there is no cutting or handling, and it is priced lower per metre.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food-safe or certified?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states no food-contact or other approvals for this product, so we do not claim any. Ask us about certified alternatives.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it in stock?\u003c\/strong\u003e\u003cbr\u003eYes. All lengths are held in stock and dispatched from the UK.\u003c\/p\u003e\n\n\u003ch3\u003eRelated profiles\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-u-channel-edge-protection-black-12mm-x-11mm-for-4-75mm-panels\"\u003eEPDM U Channel 12 × 11 mm, for 4.75 mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-square-u-channel-8-75mm-x-14mm-cut-length\"\u003eEPDM Square U Channel 8.75 × 14 mm, for 4.75 mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/solid-epdm-u-channel-17mm-x-17mm-fits-3mm-to-6mm-panels\"\u003eSolid EPDM U Channel 17 × 17 mm, for 3–6 mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-rubber-u-channel-8-4mm-x-21mm-50m-coil\"\u003eEPDM U Channel 8.4 × 21 mm, for 2.4 mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-u-channel-7mm-x-21mm-for-2mm-panels-cut-lengths\"\u003eEPDM U Channel 7 × 21 mm, for 2 mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help choosing? Call \u003ca href=\"tel:+441282277786\"\u003e+44 1282 277786\u003c\/a\u003e or email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"Industrial Polymers","offers":[{"title":"5m","offer_id":56584490353019,"sku":"IP-EPDMU-12.8X21.5-5M","price":211.38,"currency_code":"GBP","in_stock":true},{"title":"6m","offer_id":56584490385787,"sku":"IP-EPDMU-12.8X21.5-6M","price":253.65,"currency_code":"GBP","in_stock":true},{"title":"7m","offer_id":56584490418555,"sku":"IP-EPDMU-12.8X21.5-7M","price":295.92,"currency_code":"GBP","in_stock":true},{"title":"8m","offer_id":56584490451323,"sku":"IP-EPDMU-12.8X21.5-8M","price":338.19,"currency_code":"GBP","in_stock":true},{"title":"9m","offer_id":56584490484091,"sku":"IP-EPDMU-12.8X21.5-9M","price":380.46,"currency_code":"GBP","in_stock":true},{"title":"10m","offer_id":56584490516859,"sku":"IP-EPDMU-12.8X21.5-10M","price":422.73,"currency_code":"GBP","in_stock":true},{"title":"11m","offer_id":56584490549627,"sku":"IP-EPDMU-12.8X21.5-11M","price":465.0,"currency_code":"GBP","in_stock":true},{"title":"12m","offer_id":56584490582395,"sku":"IP-EPDMU-12.8X21.5-12M","price":507.27,"currency_code":"GBP","in_stock":true},{"title":"13m","offer_id":56584490615163,"sku":"IP-EPDMU-12.8X21.5-13M","price":549.54,"currency_code":"GBP","in_stock":true},{"title":"14m","offer_id":56584490647931,"sku":"IP-EPDMU-12.8X21.5-14M","price":591.81,"currency_code":"GBP","in_stock":true},{"title":"15m","offer_id":56584490680699,"sku":"IP-EPDMU-12.8X21.5-15M","price":634.11,"currency_code":"GBP","in_stock":true},{"title":"16m","offer_id":56584490713467,"sku":"IP-EPDMU-12.8X21.5-16M","price":676.38,"currency_code":"GBP","in_stock":true},{"title":"17m","offer_id":56584490746235,"sku":"IP-EPDMU-12.8X21.5-17M","price":718.65,"currency_code":"GBP","in_stock":true},{"title":"18m","offer_id":56584490779003,"sku":"IP-EPDMU-12.8X21.5-18M","price":760.92,"currency_code":"GBP","in_stock":true},{"title":"19m","offer_id":56584490811771,"sku":"IP-EPDMU-12.8X21.5-19M","price":803.19,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":56584490844539,"sku":"IP-EPDMU-12.8X21.5-20M","price":845.46,"currency_code":"GBP","in_stock":true},{"title":"21m","offer_id":56584490877307,"sku":"IP-EPDMU-12.8X21.5-21M","price":887.73,"currency_code":"GBP","in_stock":true},{"title":"22m","offer_id":56584490910075,"sku":"IP-EPDMU-12.8X21.5-22M","price":930.0,"currency_code":"GBP","in_stock":true},{"title":"23m","offer_id":56584490942843,"sku":"IP-EPDMU-12.8X21.5-23M","price":972.27,"currency_code":"GBP","in_stock":true},{"title":"24m","offer_id":56584490975611,"sku":"IP-EPDMU-12.8X21.5-24M","price":1014.54,"currency_code":"GBP","in_stock":true},{"title":"25m","offer_id":56584491008379,"sku":"IP-EPDMU-12.8X21.5-25M","price":1056.84,"currency_code":"GBP","in_stock":true},{"title":"26m","offer_id":56584491041147,"sku":"IP-EPDMU-12.8X21.5-26M","price":1099.11,"currency_code":"GBP","in_stock":true},{"title":"27m","offer_id":56584491073915,"sku":"IP-EPDMU-12.8X21.5-27M","price":1141.38,"currency_code":"GBP","in_stock":true},{"title":"28m","offer_id":56584491106683,"sku":"IP-EPDMU-12.8X21.5-28M","price":1183.65,"currency_code":"GBP","in_stock":true},{"title":"29m","offer_id":56584491139451,"sku":"IP-EPDMU-12.8X21.5-29M","price":1225.92,"currency_code":"GBP","in_stock":true},{"title":"30m full coil","offer_id":56584491172219,"sku":"IP-EPDMU-12.8X21.5-30M-COIL","price":1098.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-rubber-u-channel-12-8mm-x-21-5mm-4-8mm-panel-fit-studio.jpg?v=1794824019","url":"https:\/\/industrial-polymers.co.uk\/products\/epdm-rubber-u-channel-12-8mm-x-21-5mm-4-8mm-panel-fit","provider":"Industrial-polymers ","version":"1.0","type":"link"}