{"product_id":"epdm-rubber-u-channel-8-4mm-x-21mm-50m-coil","title":"EPDM U Channel – 8.4mm x 21mm for 2.4mm Panels – 50m Coil","description":"\u003cp\u003e\u003cstrong\u003eA tall, tapered-grip edge trim for 2.4 mm panels.\u003c\/strong\u003e This solid black EPDM U channel is 8.4 mm wide and 21 mm high, with a 2.4 mm slot, 3 mm thick legs and a fully rounded crown. The inner channel tapers so the long legs pinch the panel harder near the open end, which means it often holds without adhesive. Supplied as one continuous 50 m coil and held in stock in the UK.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2.4 mm panels:\u003c\/strong\u003e the 2.4 mm slot grips both faces of 2.4 mm sheet metal, glass, acrylic, polycarbonate or board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTall 8.4 × 21 mm profile:\u003c\/strong\u003e 3 mm walls and long gripping legs give a wide cushioned band on both sides of the sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid EPDM, 65 Shore A:\u003c\/strong\u003e 69 ±5 IRHD, tensile strength 10.5 MPa, elongation at break 315%, compression set only 7%.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated −40 °C to +120 °C:\u003c\/strong\u003e no cracks in the −30 °C cold-bend test or the UV test; good resistance to weathering, ozone, flexing and abrasion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo special tools:\u003c\/strong\u003e push on by hand and cut with a sharp knife. Bond with PU or silicone sealant for a permanent or sealed fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 m coil, one piece:\u003c\/strong\u003e £545.40 inc VAT, which works out at £10.91 per metre. About 7.85 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-u-channel-8-4mm-x-21mm-technical-drawing.png?v=1795129252\" alt=\"Technical drawing of the EPDM U channel 8.4 x 21 mm: cross-section dimensioned 8.4 mm wide, 21 mm high, 2.4 mm slot and 3 mm legs at the open end, with a tapered inner channel and rounded crown\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eNominal dimensions in mm. The 8.4 mm width, 21 mm height, 2.4 mm slot and 3 mm leg dimension are the manufacturer's figures. The 3 mm wall at the crown is (8.4 − 2.4) ÷ 2, which agrees with the 3 mm leg. The amount of taper in the slot is not published, so it is drawn for illustration only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ source\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eRound-crown U channel (edge trim) with tapered inner channel\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e8.4 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height (depth over the panel)\u003c\/td\u003e\n\u003ctd\u003e21 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot (channel) width\u003c\/td\u003e\n\u003ctd\u003e2.4 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits panel thickness\u003c\/td\u003e\n\u003ctd\u003e2.4 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg thickness at the open end\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall thickness at the crown\u003c\/td\u003e\n\u003ctd\u003e3 mm (calculated)\u003c\/td\u003e\n\u003ctd\u003e(8.4 − 2.4) ÷ 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSolid EPDM (ethylene propylene diene monomer)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e65 Shore A\u003c\/td\u003e\n\u003ctd\u003eShore A, manufacturer's product data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness (compound)\u003c\/td\u003e\n\u003ctd\u003e69 ±5 IRHD\u003c\/td\u003e\n\u003ctd\u003eIRHD, manufacturer's material sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e10.5 MPa (compound sheet); 9 MPa quoted for the profile\u003c\/td\u003e\n\u003ctd\u003eManufacturer's material sheet \/ product data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e315%\u003c\/td\u003e\n\u003ctd\u003eManufacturer's material sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e12 kN\/m\u003c\/td\u003e\n\u003ctd\u003eManufacturer's material sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e7%\u003c\/td\u003e\n\u003ctd\u003e22 h at 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eRating 6\u003c\/td\u003e\n\u003ctd\u003e98 h at 40 °C, 100 pphm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCold bend\u003c\/td\u003e\n\u003ctd\u003eNo cracks\u003c\/td\u003e\n\u003ctd\u003e−30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV stability\u003c\/td\u003e\n\u003ctd\u003eNo cracks\u003c\/td\u003e\n\u003ctd\u003eManufacturer's material sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMigration resistance\u003c\/td\u003e\n\u003ctd\u003e0.02 mg\u003c\/td\u003e\n\u003ctd\u003eManufacturer's material sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStaining\u003c\/td\u003e\n\u003ctd\u003eNo stain\u003c\/td\u003e\n\u003ctd\u003eManufacturer's material sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: change in hardness \/ tensile \/ elongation\u003c\/td\u003e\n\u003ctd\u003e+2° \/ +5% \/ 0%\u003c\/td\u003e\n\u003ctd\u003e70 h at 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: change in hardness \/ tensile \/ elongation\u003c\/td\u003e\n\u003ctd\u003e+2° \/ −1% \/ +7%\u003c\/td\u003e\n\u003ctd\u003e10 days at 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e−40 °C to +120 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer's product data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e157 g per metre (50 m coil about 7.85 kg)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's product data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied as\u003c\/td\u003e\n\u003ctd\u003eOne continuous 50 m coil\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eNot stated; extruded rubber is normally made to ISO 3302-1 tolerance classes\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThis profile is extruded from a solid EPDM compound. EPDM resists weathering, ozone, UV and water and stays flexible from cold winters to hot plant rooms. The manufacturer states the material is 100% recyclable. All test results in the table come from the manufacturer's data for this profile and its compound.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer does not state any food-contact (FDA or EC 1935\/2004), WRAS, REACH, RoHS or fire approval for this product, so we do not claim one. If your application needs a certified material, please contact us before ordering.\u003c\/p\u003e\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-u-channel-8-4mm-x-21mm-how-it-fits.png?v=1795129252\" alt=\"How it fits: section of the 8.4 x 21 mm EPDM U channel pushed onto a 2.4 mm panel edge, with four fitting steps\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:640px;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eIs a 50 m coil right for you?\u003c\/h3\u003e\n\u003cp\u003eAdd up the total length of edge to cover. For example, eight 2.4 mm guard panels of 1,200 × 800 mm edged all round need 8 × 4 m = 32 m, plus about 5% for cuts and joints: one 50 m coil does the job with spare. At £10.91 per metre a full coil is the most economical way to buy this size of trim.\u003c\/p\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSheet metal machine guards, covers and enclosure doors made from 2.4 mm sheet\u003c\/li\u003e\n\u003cli\u003eProtective edge on 2.4 mm glass, acrylic and polycarbonate screens\u003c\/li\u003e\n\u003cli\u003eHiding rough, burred or uneven cut edges on sheet and board\u003c\/li\u003e\n\u003cli\u003eVending machines, kiosks, shop fittings and furniture panels\u003c\/li\u003e\n\u003cli\u003eStairs, steps, kick plates and running boards\u003c\/li\u003e\n\u003cli\u003eBonded into aluminium window or panel channels as a sealing strip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eDeburr and clean the edge. Check with a caliper that the sheet is 2.4 mm thick.\u003c\/li\u003e\n\u003cli\u003eStart at a corner and press the channel on by hand, working along the edge. A soft-faced mallet helps on long runs.\u003c\/li\u003e\n\u003cli\u003eOn outside corners, ease the trim round the bend. On tight corners, cut a small V-notch out of the legs.\u003c\/li\u003e\n\u003cli\u003eCut a few millimetres long with a sharp knife, then push the ends together into a tight butt joint.\u003c\/li\u003e\n\u003cli\u003eFor a sealed or permanent fit, run a bead of PU or silicone sealant into the slot first.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat panel thickness does it fit?\u003c\/strong\u003e\u003cbr\u003e2.4 mm panels. To use it on a thinner sheet, bond a thin rubber strip inside the slot to pack it out. For 2 mm sheet choose the 7 × 21 mm channel; for 4.8 mm panels choose the 12.8 × 21.5 mm channel. A 3 mm edge will not fit this slot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to glue it?\u003c\/strong\u003e\u003cbr\u003eUsually not. The tapered slot and long legs give a firm mechanical grip on 2.4 mm sheet. Use PU or silicone sealant where it must seal, where there is heavy vibration, or on a panel at the thin end of the tolerance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I measure what I need?\u003c\/strong\u003e\u003cbr\u003eMeasure the panel thickness with a caliper first, then add up the total edge length in metres and allow about 5% extra for cuts and joints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. EPDM is chosen for outdoor use: this compound showed no cracks in the UV test and the −30 °C cold-bend test, and resists weathering and ozone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer rates it from −40 °C to +120 °C. Its properties barely changed after 10 days at 70 °C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eUse a sharp knife or heavy shears and cut square. Butt the ends together tightly. For a sealed joint, add a little cyanoacrylate glue or sealant to the cut faces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it go round corners?\u003c\/strong\u003e\u003cbr\u003eIt follows gentle curves easily. For sharp outside corners, notch the legs from the inside so the crown bends neatly, or cut and butt-join the ends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it soft or firm?\u003c\/strong\u003e\u003cbr\u003eAt 65 Shore A it is medium-firm: soft enough to absorb knocks, firm enough to hold its shape and grip the panel. The low 7% compression set means it keeps its grip over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I make the trim wider or fit a thinner panel?\u003c\/strong\u003e\u003cbr\u003eYes. Bond a neoprene strip alongside the channel to widen the finished edge, or bond a strip inside the slot to suit a thinner panel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food-safe or certified?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states no food-contact or other approvals for this product, so we do not claim any. Ask us about certified alternatives.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it in stock?\u003c\/strong\u003e\u003cbr\u003eYes. 50 m coils are held in stock and dispatched from the UK.\u003c\/p\u003e\n\u003ch3\u003eRelated profiles\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-u-channel-7mm-x-21mm-for-2mm-panels-cut-lengths\"\u003eEPDM U Channel 7 × 21 mm, for 2 mm panels, 6 m to 30 m\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-rubber-u-channel-5-6mm-x-19mm-8m-to-30m-coils\"\u003eEPDM U Channel 5.6 × 19 mm, for 1.6 mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-rubber-u-channel-12-8mm-x-21-5mm-4-8mm-panel-fit\"\u003eEPDM U Channel 12.8 × 21.5 mm, for 4.8 mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/tpe-u-channel-8-4mm-x-20mm-for-1-5mm-panels-50m-coil\"\u003eTPE U Channel 8.4 × 20 mm, for 1.5 mm panels, 50 m coil\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-square-u-channel-14-7mm-x-22mm-cut-lengths\"\u003eEPDM Square U Channel 14.7 × 22 mm\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help choosing? Call \u003ca href=\"tel:+441282277786\"\u003e+44 1282 277786\u003c\/a\u003e or email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"50 m coil","offer_id":56590427586939,"sku":"IP-EPDMU-8.4X21-50M-COIL","price":545.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-rubber-u-channel-8-4mm-x-21mm-50m-coil-studio.jpg?v=1795062013","url":"https:\/\/industrial-polymers.co.uk\/products\/epdm-rubber-u-channel-8-4mm-x-21mm-50m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}