{"product_id":"epdm-self-grip-edge-trim-7-4mm-x-9-7mm","title":"EPDM Self-Grip Edge Trim – 7.4mm x 9.7mm – Fits 1mm to 2mm Panels – 20m to 75m","description":"\u003cp\u003e\u003cstrong\u003eA solid black EPDM rubber edge trim with a steel wire carrier that pushes onto 1 mm to 2 mm sheet edges and holds by grip alone, with no glue.\u003c\/strong\u003e The profile is 7.4 mm wide and 9.7 mm high. A U-shaped steel wire runs inside the rubber for the full length and keeps the jaws clamped, while two angled fins inside the 3.6 mm mouth fold against both faces of the panel and stop it pulling off. EPDM stays flexible from −40 °C to +120 °C and stands up to sun, ozone and weather, so it suits outdoor and indoor edges alike. Choose any continuous length from 20 m to 74 m, or a full 75 m coil. It is in stock in the UK for same-day dispatch.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e sheet metal, glass, plastic, fibreglass and board edges 1 mm to 2 mm thick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 7.4 mm wide × 9.7 mm high; 3.6 mm mouth; 7.8 mm inner depth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e solid EPDM rubber, 70° Shore A, moulded over a U-shaped steel wire carrier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip:\u003c\/strong\u003e twin internal fins and the wire clamp hold it on with no adhesive, so it can be removed and refitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking temperature:\u003c\/strong\u003e −40 °C to +120 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.07 kg per metre\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrice:\u003c\/strong\u003e £6.60 per metre inc VAT for 20 m to 49 m; £5.10 per metre for 50 m and over (75 m coil £382.50)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNeed fire-rated trim for rail or public transport?\u003c\/strong\u003e The same 7.4 × 9.7 mm profile is available in a flame-retardant EPDM compound stated to EN 45545-2: \u003ca href=\"\/products\/fire-rated-epdm-self-grip-edge-trim-7-4mm-x-9-7mm-en-45545-2\"\u003eFire-Rated EPDM Self-Grip Edge Trim 7.4 × 9.7 mm\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-self-grip-edge-trim-7-4x9-7mm-technical-drawing.png?v=1795078867\" alt=\"Technical drawing of the EPDM self-grip edge trim cross-section: 7.4 mm wide, 9.7 mm high, 3.6 mm mouth, 7.8 mm inner depth, steel wire carrier and twin gripping fins, fits 1 to 2 mm panels\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eAll dimensions are in mm and nominal. The drawing is not to scale. The carrier and fin shapes are shown as typical.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ basis\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eSelf-gripping U edge trim with steel wire carrier and twin internal gripping fins\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e7.4 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing and data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e9.7 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing and data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMouth opening (unflexed, between the feet)\u003c\/td\u003e\n\u003ctd\u003e3.6 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner depth (mouth to inside of crown)\u003c\/td\u003e\n\u003ctd\u003e7.8 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrown thickness\u003c\/td\u003e\n\u003ctd\u003e1.9 mm\u003c\/td\u003e\n\u003ctd\u003eCalculated: 9.7 − 7.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSide wall each side of the mouth\u003c\/td\u003e\n\u003ctd\u003e1.9 mm\u003c\/td\u003e\n\u003ctd\u003eCalculated: (7.4 − 3.6) ÷ 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel thickness it fits\u003c\/td\u003e\n\u003ctd\u003e1 mm to 2 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer product data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSolid EPDM (ethylene propylene diene monomer) rubber\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarrier\u003c\/td\u003e\n\u003ctd\u003eSteel wire, U-shaped, full length\u003c\/td\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e70° Shore A (data sheet: 70° to 71°)\u003c\/td\u003e\n\u003ctd\u003eISO 7619-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e7.8 MPa\u003c\/td\u003e\n\u003ctd\u003eISO 37\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e340 %\u003c\/td\u003e\n\u003ctd\u003eISO 37\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear resistance\u003c\/td\u003e\n\u003ctd\u003e22.18 N\/mm\u003c\/td\u003e\n\u003ctd\u003eISO 34-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set (22 h at 100 °C)\u003c\/td\u003e\n\u003ctd\u003e23.12 %\u003c\/td\u003e\n\u003ctd\u003eISO 815\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness change after low-temperature ageing (168 h at −10 °C)\u003c\/td\u003e\n\u003ctd\u003e+4° Shore A\u003c\/td\u003e\n\u003ctd\u003eDIN 53505\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance (72 h at 40 °C, 50 pphm)\u003c\/td\u003e\n\u003ctd\u003eNo cracking\u003c\/td\u003e\n\u003ctd\u003eISO 1431-1, method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV resistance\u003c\/td\u003e\n\u003ctd\u003eNo migration\u003c\/td\u003e\n\u003ctd\u003eASTM D1148\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrittleness (24 h at −40 °C)\u003c\/td\u003e\n\u003ctd\u003eNo cracking\u003c\/td\u003e\n\u003ctd\u003eISO 812\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum working temperature\u003c\/td\u003e\n\u003ctd\u003e−40 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum working temperature\u003c\/td\u003e\n\u003ctd\u003e+120 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.07 kg per metre\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eNot stated; dimensions are nominal\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied as\u003c\/td\u003e\n\u003ctd\u003eOne continuous length, 20 m to 74 m, or a full 75 m coil\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e£6.60\/m inc VAT (20–49 m); £5.10\/m inc VAT (50–75 m)\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThe trim is solid EPDM rubber moulded over a steel wire carrier. EPDM keeps its flexibility in frost and summer heat and resists UV, ozone and weathering, which is why the manufacturer's tests show no cracking after ozone exposure or at −40 °C. It is a good choice for outdoor sheet edges. EPDM is not resistant to petrol, oils or most solvents, so do not use it where it will be soaked in them. The manufacturer does not state any food-contact (FDA, EC 1935\/2004), drinking-water (WRAS), fire-rating, REACH, RoHS or other product approvals for this standard version, so we do not claim any. If you need fire performance, choose the \u003ca href=\"\/products\/fire-rated-epdm-self-grip-edge-trim-7-4mm-x-9-7mm-en-45545-2\"\u003efire-rated version\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-self-grip-edge-trim-7-4x9-7mm-how-it-fits.png?v=1795078868\" alt=\"How it fits: section through the 7.4 x 9.7 mm EPDM edge trim on a 1.5 mm panel, showing the twin fins gripping both faces and the steel carrier, plus four fitting steps\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:700px;height:auto\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the edge.\u003c\/strong\u003e The panel should be 1 mm to 2 mm thick. Deburr the edge and make sure it is clean and dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush on.\u003c\/strong\u003e Start at one end and press the trim onto the edge by hand, working along the run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat it.\u003c\/strong\u003e Tap along the top with a rubber or plastic mallet until the edge sits fully inside the channel. You need no adhesive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut and finish.\u003c\/strong\u003e Cut through the rubber and wire with side cutters, tin snips or a fine hacksaw. Butt the ends tightly together.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFinishing cut edges on sheet steel and aluminium panels, enclosures and computer or electrical cabinets\u003c\/li\u003e\n\u003cli\u003eSafety edging on machine guards, brackets and access hatches\u003c\/li\u003e\n\u003cli\u003eGarage doors, sheds, playground equipment and other outdoor sheet edges\u003c\/li\u003e\n\u003cli\u003eFibreglass and composite panels on boats and marine equipment\u003c\/li\u003e\n\u003cli\u003eVehicle interior side panels and side window surrounds\u003c\/li\u003e\n\u003cli\u003eProtecting sheet and glass edges in storage and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat thickness of panel does it fit?\u003c\/strong\u003e\u003cbr\u003eIt is made for edges 1 mm to 2 mm thick, which covers most 1.2 mm and 1.5 mm sheet steel, 2 mm aluminium and thin glass or acrylic. The fins grip less firmly below 1 mm. For thinner edges, look at our 5.5 × 8.5 mm or 6.5 × 9.5 mm PVC trims.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I need?\u003c\/strong\u003e\u003cbr\u003eMeasure the total run in metres and add about 5 % for cuts and corners. Each length is supplied as one continuous piece, from 20 m up to a full 75 m coil.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is 50 m cheaper than 45 m?\u003c\/strong\u003e\u003cbr\u003eThe price per metre drops from £6.60 to £5.10 at 50 m. So if you need 39 m to 49 m, ordering 50 m costs the same or less. The full 75 m coil is the best value at £5.10 per metre.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need glue?\u003c\/strong\u003e\u003cbr\u003eNo. The steel wire keeps the jaws clamped and the two fins hold the trim on. Because there is no adhesive, you can remove it and fit it again.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it go round corners and curves?\u003c\/strong\u003e\u003cbr\u003eYes. The wire carrier bends, so the trim follows curves and radiused corners. For a sharp 90° external corner, cut a small V-notch in the inside of the trim so it folds neatly without bunching.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eBecause of the steel wire, a knife alone will not do. Use side cutters, tin snips or a fine-tooth hacksaw, then trim any loose rubber. Butt the ends tightly for a neat joint; no joining piece is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer rates it for −40 °C to +120 °C, and its tests show no cracking after 24 hours at −40 °C. That covers outdoor UK use all year and warm machinery, but not ovens or exhaust parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. EPDM is one of the most weather-resistant rubbers. The manufacturer's ozone and UV tests show no cracking and no migration, so it suits garage doors, sheds, boats and outdoor equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between this and the fire-rated version?\u003c\/strong\u003e\u003cbr\u003eThe size and fit are the same. The fire-rated version uses a flame-retardant EPDM compound stated to EN 45545-2 for rail vehicles. This standard version has higher published tensile, tear and elongation figures and costs less, but has no fire rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e\u003cbr\u003eNo food-contact or drinking-water approvals are stated for this profile, so do not use it where those are required.\u003c\/p\u003e\n\n\u003ch3\u003eComplete your project\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/fire-rated-epdm-self-grip-edge-trim-7-4mm-x-9-7mm-en-45545-2\"\u003eFire-Rated EPDM Self-Grip Edge Trim – 7.4mm x 9.7mm – EN 45545-2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/self-grip-pvc-edge-trim-6-5mm-x-9-5mm-50m-coil\"\u003eSelf-Grip PVC Edge Trim – 6.5mm x 9.5mm – for 1mm to 1.5mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/self-grip-pvc-edge-trim-5-5mm-x-8-5mm-profile-cut-to-length\"\u003eSelf-Grip PVC Edge Trim – 5.5mm x 8.5mm – 14m to 50m lengths\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pvc-self-grip-edge-trim-12mm-x-15-5mm-cut-to-length\"\u003ePVC Self-Grip Edge Trim – 12mm x 15.5mm – for thicker panels\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help choosing or fitting? Call \u003ca href=\"tel:+441282277786\"\u003e+44 1282 277786\u003c\/a\u003e, email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003econtact our team\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"20 m","offer_id":56590688616827,"sku":"IP-EPDMET-7.4X9.7-20M","price":132.0,"currency_code":"GBP","in_stock":true},{"title":"21 m","offer_id":56590688649595,"sku":"IP-EPDMET-7.4X9.7-21M","price":138.6,"currency_code":"GBP","in_stock":true},{"title":"22 m","offer_id":56590688682363,"sku":"IP-EPDMET-7.4X9.7-22M","price":145.2,"currency_code":"GBP","in_stock":true},{"title":"23 m","offer_id":56590688715131,"sku":"IP-EPDMET-7.4X9.7-23M","price":151.8,"currency_code":"GBP","in_stock":true},{"title":"24 m","offer_id":56590688747899,"sku":"IP-EPDMET-7.4X9.7-24M","price":158.4,"currency_code":"GBP","in_stock":true},{"title":"25 m","offer_id":56590688780667,"sku":"IP-EPDMET-7.4X9.7-25M","price":165.0,"currency_code":"GBP","in_stock":true},{"title":"26 m","offer_id":56590688813435,"sku":"IP-EPDMET-7.4X9.7-26M","price":171.6,"currency_code":"GBP","in_stock":true},{"title":"27 m","offer_id":56590688846203,"sku":"IP-EPDMET-7.4X9.7-27M","price":178.2,"currency_code":"GBP","in_stock":true},{"title":"28 m","offer_id":56590688878971,"sku":"IP-EPDMET-7.4X9.7-28M","price":184.8,"currency_code":"GBP","in_stock":true},{"title":"29 m","offer_id":56590688911739,"sku":"IP-EPDMET-7.4X9.7-29M","price":191.4,"currency_code":"GBP","in_stock":true},{"title":"30 m","offer_id":56590688944507,"sku":"IP-EPDMET-7.4X9.7-30M","price":198.0,"currency_code":"GBP","in_stock":true},{"title":"31 m","offer_id":56590688977275,"sku":"IP-EPDMET-7.4X9.7-31M","price":204.6,"currency_code":"GBP","in_stock":true},{"title":"32 m","offer_id":56590689010043,"sku":"IP-EPDMET-7.4X9.7-32M","price":211.2,"currency_code":"GBP","in_stock":true},{"title":"33 m","offer_id":56590689042811,"sku":"IP-EPDMET-7.4X9.7-33M","price":217.8,"currency_code":"GBP","in_stock":true},{"title":"34 m","offer_id":56590689075579,"sku":"IP-EPDMET-7.4X9.7-34M","price":224.4,"currency_code":"GBP","in_stock":true},{"title":"35 m","offer_id":56590689108347,"sku":"IP-EPDMET-7.4X9.7-35M","price":231.0,"currency_code":"GBP","in_stock":true},{"title":"36 m","offer_id":56590689141115,"sku":"IP-EPDMET-7.4X9.7-36M","price":237.6,"currency_code":"GBP","in_stock":true},{"title":"37 m","offer_id":56590689173883,"sku":"IP-EPDMET-7.4X9.7-37M","price":244.2,"currency_code":"GBP","in_stock":true},{"title":"38 m","offer_id":56590689206651,"sku":"IP-EPDMET-7.4X9.7-38M","price":250.8,"currency_code":"GBP","in_stock":true},{"title":"39 m","offer_id":56590689239419,"sku":"IP-EPDMET-7.4X9.7-39M","price":257.4,"currency_code":"GBP","in_stock":true},{"title":"40 m","offer_id":56590689272187,"sku":"IP-EPDMET-7.4X9.7-40M","price":264.0,"currency_code":"GBP","in_stock":true},{"title":"41 m","offer_id":56590689304955,"sku":"IP-EPDMET-7.4X9.7-41M","price":270.6,"currency_code":"GBP","in_stock":true},{"title":"42 m","offer_id":56590689337723,"sku":"IP-EPDMET-7.4X9.7-42M","price":277.2,"currency_code":"GBP","in_stock":true},{"title":"43 m","offer_id":56590689370491,"sku":"IP-EPDMET-7.4X9.7-43M","price":283.8,"currency_code":"GBP","in_stock":true},{"title":"44 m","offer_id":56590689403259,"sku":"IP-EPDMET-7.4X9.7-44M","price":290.4,"currency_code":"GBP","in_stock":true},{"title":"45 m","offer_id":56590689436027,"sku":"IP-EPDMET-7.4X9.7-45M","price":297.0,"currency_code":"GBP","in_stock":true},{"title":"46 m","offer_id":56590689468795,"sku":"IP-EPDMET-7.4X9.7-46M","price":303.6,"currency_code":"GBP","in_stock":true},{"title":"47 m","offer_id":56590689501563,"sku":"IP-EPDMET-7.4X9.7-47M","price":310.2,"currency_code":"GBP","in_stock":true},{"title":"48 m","offer_id":56590689534331,"sku":"IP-EPDMET-7.4X9.7-48M","price":316.8,"currency_code":"GBP","in_stock":true},{"title":"49 m","offer_id":56590689567099,"sku":"IP-EPDMET-7.4X9.7-49M","price":323.4,"currency_code":"GBP","in_stock":true},{"title":"50 m","offer_id":56590689599867,"sku":"IP-EPDMET-7.4X9.7-50M","price":255.0,"currency_code":"GBP","in_stock":true},{"title":"51 m","offer_id":56590689632635,"sku":"IP-EPDMET-7.4X9.7-51M","price":260.1,"currency_code":"GBP","in_stock":true},{"title":"52 m","offer_id":56590689665403,"sku":"IP-EPDMET-7.4X9.7-52M","price":265.2,"currency_code":"GBP","in_stock":true},{"title":"53 m","offer_id":56590689698171,"sku":"IP-EPDMET-7.4X9.7-53M","price":270.3,"currency_code":"GBP","in_stock":true},{"title":"54 m","offer_id":56590689730939,"sku":"IP-EPDMET-7.4X9.7-54M","price":275.4,"currency_code":"GBP","in_stock":true},{"title":"55 m","offer_id":56590689763707,"sku":"IP-EPDMET-7.4X9.7-55M","price":280.5,"currency_code":"GBP","in_stock":true},{"title":"56 m","offer_id":56590689796475,"sku":"IP-EPDMET-7.4X9.7-56M","price":285.6,"currency_code":"GBP","in_stock":true},{"title":"57 m","offer_id":56590689829243,"sku":"IP-EPDMET-7.4X9.7-57M","price":290.7,"currency_code":"GBP","in_stock":true},{"title":"58 m","offer_id":56590689862011,"sku":"IP-EPDMET-7.4X9.7-58M","price":295.8,"currency_code":"GBP","in_stock":true},{"title":"59 m","offer_id":56590689894779,"sku":"IP-EPDMET-7.4X9.7-59M","price":300.9,"currency_code":"GBP","in_stock":true},{"title":"60 m","offer_id":56590689927547,"sku":"IP-EPDMET-7.4X9.7-60M","price":306.0,"currency_code":"GBP","in_stock":true},{"title":"61 m","offer_id":56590689960315,"sku":"IP-EPDMET-7.4X9.7-61M","price":311.1,"currency_code":"GBP","in_stock":true},{"title":"62 m","offer_id":56590689993083,"sku":"IP-EPDMET-7.4X9.7-62M","price":316.2,"currency_code":"GBP","in_stock":true},{"title":"63 m","offer_id":56590690025851,"sku":"IP-EPDMET-7.4X9.7-63M","price":321.3,"currency_code":"GBP","in_stock":true},{"title":"64 m","offer_id":56590690058619,"sku":"IP-EPDMET-7.4X9.7-64M","price":326.4,"currency_code":"GBP","in_stock":true},{"title":"65 m","offer_id":56590690091387,"sku":"IP-EPDMET-7.4X9.7-65M","price":331.5,"currency_code":"GBP","in_stock":true},{"title":"66 m","offer_id":56590690124155,"sku":"IP-EPDMET-7.4X9.7-66M","price":336.6,"currency_code":"GBP","in_stock":true},{"title":"67 m","offer_id":56590690156923,"sku":"IP-EPDMET-7.4X9.7-67M","price":341.7,"currency_code":"GBP","in_stock":true},{"title":"68 m","offer_id":56590690189691,"sku":"IP-EPDMET-7.4X9.7-68M","price":346.8,"currency_code":"GBP","in_stock":true},{"title":"69 m","offer_id":56590690222459,"sku":"IP-EPDMET-7.4X9.7-69M","price":351.9,"currency_code":"GBP","in_stock":true},{"title":"70 m","offer_id":56590690255227,"sku":"IP-EPDMET-7.4X9.7-70M","price":357.0,"currency_code":"GBP","in_stock":true},{"title":"71 m","offer_id":56590690287995,"sku":"IP-EPDMET-7.4X9.7-71M","price":362.1,"currency_code":"GBP","in_stock":true},{"title":"72 m","offer_id":56590690320763,"sku":"IP-EPDMET-7.4X9.7-72M","price":367.2,"currency_code":"GBP","in_stock":true},{"title":"73 m","offer_id":56590690353531,"sku":"IP-EPDMET-7.4X9.7-73M","price":372.3,"currency_code":"GBP","in_stock":true},{"title":"74 m","offer_id":56590690386299,"sku":"IP-EPDMET-7.4X9.7-74M","price":377.4,"currency_code":"GBP","in_stock":true},{"title":"75 m (full coil)","offer_id":56590690419067,"sku":"IP-EPDMET-7.4X9.7-75M-COIL","price":382.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-self-grip-edge-trim-7-4x9-7mm-black-end-view.png?v=1795078869","url":"https:\/\/industrial-polymers.co.uk\/products\/epdm-self-grip-edge-trim-7-4mm-x-9-7mm","provider":"Industrial-polymers ","version":"1.0","type":"link"}