{"product_id":"epdm-self-grip-top-seal-22-5mm-high-11m-to-25m-lengths","title":"Self-Grip EPDM Top Seal – 22.5mm High – Offset Sponge Bulb, Fits 1-2mm Panels – 11m to 25m","description":"\u003cp\u003eA push-on EPDM top seal for \u003cstrong\u003e1mm to 2mm\u003c\/strong\u003e sheet and panel edges. A metal-reinforced solid EPDM grip clamps the edge with no glue, and a \u003cstrong\u003ehollow sponge EPDM bulb\u003c\/strong\u003e, raised 10.5mm above the grip on an angled stem, seals against a closing hatch, lid, door or roof panel. It stands \u003cstrong\u003e22.5mm high\u003c\/strong\u003e overall, is black, and comes as \u003cstrong\u003eone continuous length from 11m to 24m, or a full 25m coil\u003c\/strong\u003e. Cut lengths work out at £20.70 per metre inc VAT; the 25m coil is £15.84 per metre.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e22.5mm overall height; the sponge bulb sits 10.5mm above the top of the grip\u003c\/li\u003e\n\u003cli\u003eGrip channel 4mm opening x 9.5mm deep; fits edges 1mm to 2mm thick\u003c\/li\u003e\n\u003cli\u003eSolid EPDM grip (80 ± 5° Shore A) with a full-length U-shaped steel carrier and internal gripping fingers\u003c\/li\u003e\n\u003cli\u003eOffset hollow sponge bulb with a small fin, for a soft, low-force seal\u003c\/li\u003e\n\u003cli\u003eWeather and ozone resistant EPDM, -40°C to +80°C\u003c\/li\u003e\n\u003cli\u003eIn stock in the UK; each length is one piece with no joins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/self-grip-epdm-top-seal-22-5mm-technical-drawing.png?v=1795315966\" alt=\"Technical drawing of EPDM self-grip top seal 22.5mm high with offset sponge bulb, all dimensions in mm\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e22.5mm\u003c\/td\u003e\n\u003ctd\u003eBase of grip to tip of the bulb fin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb height above grip\u003c\/td\u003e\n\u003ctd\u003e10.5mm\u003c\/td\u003e\n\u003ctd\u003eTop of grip to tip of the bulb fin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrip height\u003c\/td\u003e\n\u003ctd\u003e12mm\u003c\/td\u003e\n\u003ctd\u003eDerived: 22.5mm minus 10.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrip channel opening\u003c\/td\u003e\n\u003ctd\u003e4mm\u003c\/td\u003e\n\u003ctd\u003eNominal, before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrip channel depth\u003c\/td\u003e\n\u003ctd\u003e9.5mm\u003c\/td\u003e\n\u003ctd\u003eNominal; the edge should be at least this deep to seat fully\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits panel \/ edge thickness\u003c\/td\u003e\n\u003ctd\u003e1mm to 2mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer fitting range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSponge bulb size\u003c\/td\u003e\n\u003ctd\u003eApprox. 7mm across\u003c\/td\u003e\n\u003ctd\u003eScaled from the manufacturer's drawing; not a stated dimension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer\u003c\/td\u003e\n\u003ctd\u003eApprox. 11 to 12mm, scaled from the drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrip material\u003c\/td\u003e\n\u003ctd\u003eSolid EPDM rubber\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb material\u003c\/td\u003e\n\u003ctd\u003eSponge (cellular) EPDM\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarrier\u003c\/td\u003e\n\u003ctd\u003eSteel, U-shaped, full length\u003c\/td\u003e\n\u003ctd\u003eType Fe 50 to UNI 5961-67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSolid EPDM grip\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e80° ± 5° Shore A (listed range 67° to 82°)\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e80 kg\/cm² min (approx. 7.8 MPa)\u003c\/td\u003e\n\u003ctd\u003eASTM D412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear resistance\u003c\/td\u003e\n\u003ctd\u003e3 kg\/mm min (approx. 29 kN\/m)\u003c\/td\u003e\n\u003ctd\u003eASTM D624\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrittle point\u003c\/td\u003e\n\u003ctd\u003e-40°C\u003c\/td\u003e\n\u003ctd\u003eASTM D746\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e40% max\u003c\/td\u003e\n\u003ctd\u003eASTM D395 Method B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness change after air ageing\u003c\/td\u003e\n\u003ctd\u003e+2° Shore A\u003c\/td\u003e\n\u003ctd\u003e70h at 70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile change after air ageing\u003c\/td\u003e\n\u003ctd\u003e+15%\u003c\/td\u003e\n\u003ctd\u003e70h at 70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eNo cracks\u003c\/td\u003e\n\u003ctd\u003eASTM D1149, 70h at 50°C, 50 pphm, 20% elongation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSponge EPDM bulb\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (indicative)\u003c\/td\u003e\n\u003ctd\u003e550 to 600 kg\/m³ (0.55 to 0.60 g\/cm³)\u003c\/td\u003e\n\u003ctd\u003eManufacturer figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e7 to 10 kg\/cm² (approx. 0.7 to 1.0 MPa)\u003c\/td\u003e\n\u003ctd\u003eASTM D412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear resistance\u003c\/td\u003e\n\u003ctd\u003e0.6 to 0.8 kg\/mm\u003c\/td\u003e\n\u003ctd\u003eASTM D624\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003e1.2% max\u003c\/td\u003e\n\u003ctd\u003eASTM D1056, 22h at 23°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrittle point\u003c\/td\u003e\n\u003ctd\u003e-40°C\u003c\/td\u003e\n\u003ctd\u003eASTM D746\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eNo cracks\u003c\/td\u003e\n\u003ctd\u003eASTM D1149, 70h at 50°C, 50 pphm, 50% elongation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSteel carrier\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e80 to 90 HRB\u003c\/td\u003e\n\u003ctd\u003eRockwell B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e50 kg\/mm² min (approx. 490 MPa)\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eComplete profile\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-40°C to +80°C\u003c\/td\u003e\n\u003ctd\u003eContinuous service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set (bulb)\u003c\/td\u003e\n\u003ctd\u003e50% max\u003c\/td\u003e\n\u003ctd\u003eASTM D1056, 7 days at 70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended bulb compression\u003c\/td\u003e\n\u003ctd\u003e30% to 40%; 40% max in service (the data sheet's absolute limit is 50%)\u003c\/td\u003e\n\u003ctd\u003eManufacturer guidance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStaining (migration and contact)\u003c\/td\u003e\n\u003ctd\u003eSatisfactory\u003c\/td\u003e\n\u003ctd\u003eASTM D925\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour fastness\u003c\/td\u003e\n\u003ctd\u003eSatisfactory\u003c\/td\u003e\n\u003ctd\u003eASTM D750\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer; extruded sponge sections are typically held to ISO 3302-1 class E2 (typical for EPDM extrusions, not tested on this profile)\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied as\u003c\/td\u003e\n\u003ctd\u003eOne continuous length, 11m to 24m in 1m steps, or a full 25m coil\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThe grip and stem are solid EPDM, the sealing bulb is closed-skin sponge EPDM, and the core is a U-shaped steel carrier. EPDM is chosen here for its resistance to weather, UV, ozone and water. The manufacturer does not state any food-contact, drinking-water, REACH or RoHS approval for this profile, so we do not claim one. If you need a certificate for your application, ask us before ordering.\u003c\/p\u003e\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/self-grip-epdm-top-seal-22-5mm-fitting-guide.png?v=1795315965\" alt=\"Illustration: true-scale cross-section of the 22.5mm top seal pushed onto a 1.5mm sheet edge, open and with a closing lid squashing the bulb by about a third\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSealing the closing edge of access hatches, inspection covers and lids made from thin sheet\u003c\/li\u003e\n\u003cli\u003eWeatherproofing electrical enclosure, cabinet and kiosk doors\u003c\/li\u003e\n\u003cli\u003eVehicle, bus, train and van body doors, side windows and interior panels\u003c\/li\u003e\n\u003cli\u003eMarine lockers and equipment hatches\u003c\/li\u003e\n\u003cli\u003eRoof panels, glazing panels and machine guards\u003c\/li\u003e\n\u003cli\u003eCovering raw sheet-metal edges while sealing at the same time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eTop seal\u003c\/th\u003e\n\u003cth\u003eChoose it when\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e22.5mm high (this seal)\u003c\/td\u003e\n\u003ctd\u003e1mm to 2mm edges and a compact bulb offset to one side of the grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-rubber-top-seal-20mm-x-32mm-for-1-2mm-panels-per-metre\"\u003e20mm x 32mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eThe same 1mm to 2mm edges with a much larger bulb for bigger gaps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-self-grip-top-seal-11mm-x-16mm-10m-to-50m-coil\"\u003e11mm x 16mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eThinner 0.8mm to 1.2mm sheet and a lower profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-self-grip-top-seal-12mm-x-21mm-per-metre\"\u003e12mm x 21mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eThicker 1.6mm to 3mm edges at a similar height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAdd up every edge the seal runs along, then add about 5% for trimming. A hatch of 1.5m x 1m has a perimeter of 5m, so two hatches need about 10.5m and the 11m length covers them. The 25m full coil (£396.00) costs less than any cut length from 20m upwards, so choose it whenever you need more than 19m.\u003c\/p\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eClean the edge and file off burrs; the edge must be 1mm to 2mm thick and ideally at least 9.5mm deep.\u003c\/li\u003e\n\u003cli\u003eStart at the centre of the bottom or least visible edge, with the bulb facing the closing surface.\u003c\/li\u003e\n\u003cli\u003ePress the grip on by hand, then tap along it with a rubber or plastic mallet until the edge is fully seated in the channel.\u003c\/li\u003e\n\u003cli\u003eGo round radiused corners in one piece. At sharp corners, cut a small notch out of the grip only so the bulb stays continuous.\u003c\/li\u003e\n\u003cli\u003eCut the end square with heavy-duty side cutters (through the steel), leave it 2mm to 3mm long and push it in tight against the start for a closed joint.\u003c\/li\u003e\n\u003cli\u003eCheck the closed gap: the sponge bulb should be squashed by 30% to 40% and never more.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eData sheet\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-self-grip-top-seal-22-5mm-high-11m-to-25m-lengths-data-sheet.pdf?v=1794961467\" target=\"_blank\" rel=\"noopener\"\u003eDownload the technical data sheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs it sold per metre?\u003c\/strong\u003e\u003cbr\u003eNo. Each option is one continuous length (11m to 24m) or a full 25m coil, at the price shown for that length, so a whole opening can be sealed with a single joint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich panel thickness does it fit?\u003c\/strong\u003e\u003cbr\u003eEdges from 1mm to 2mm. Thinner sheet will not be gripped firmly, and thicker sheet will not seat fully in the 4mm channel. Measure with calipers if unsure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow far should the bulb be squashed?\u003c\/strong\u003e\u003cbr\u003eBy 30% to 40% when the door or lid is closed. The bulb is roughly 7mm across, so that is about 2mm to 3mm of squash. Squashing it harder makes the sponge take a permanent set and stop sealing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need adhesive?\u003c\/strong\u003e\u003cbr\u003eNo. The steel carrier and internal gripping fingers hold it on the edge. Adhesive is only worth adding where the edge is shorter than the 9.5mm channel depth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. Both the solid grip and the sponge bulb are EPDM, passed the ASTM D1149 ozone test with no cracks, and are rated from -40°C to +80°C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut through the steel carrier with heavy-duty side cutters or a fine hacksaw, not scissors. Butt the two ends tightly together; for a fully sealed joint, add a little flexible sealant or instant adhesive suitable for EPDM to the bulb ends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it go round corners?\u003c\/strong\u003e\u003cbr\u003eYes, it follows radiused corners without cutting. For a tight 90° corner, notch the grip only so the bulb continues round unbroken.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for fuel or oil?\u003c\/strong\u003e\u003cbr\u003eNo. EPDM swells in petrol, diesel and mineral oils. It is fine with water, detergents, most household chemicals and weather.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen will it be dispatched?\u003c\/strong\u003e\u003cbr\u003eIt is held in stock in the UK; see the dispatch message by the Add to basket button.\u003c\/p\u003e\n\u003cp\u003eNeed help choosing the right edge seal? Contact \u003ca href=\"\/pages\/contact\"\u003eour team\u003c\/a\u003e on +44 1282 277786 or sales@industrial-polymers.co.uk.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"11m","offer_id":56588508070267,"sku":"IP-IPSGT-22.5-11","price":227.7,"currency_code":"GBP","in_stock":true},{"title":"12m","offer_id":56588508103035,"sku":"IP-IPSGT-22.5-12","price":248.4,"currency_code":"GBP","in_stock":true},{"title":"13m","offer_id":56588508135803,"sku":"IP-IPSGT-22.5-13","price":269.1,"currency_code":"GBP","in_stock":true},{"title":"14m","offer_id":56588508168571,"sku":"IP-IPSGT-22.5-14","price":289.8,"currency_code":"GBP","in_stock":true},{"title":"15m","offer_id":56588508201339,"sku":"IP-IPSGT-22.5-15","price":310.5,"currency_code":"GBP","in_stock":true},{"title":"16m","offer_id":56588508234107,"sku":"IP-IPSGT-22.5-16","price":331.2,"currency_code":"GBP","in_stock":true},{"title":"17m","offer_id":56588508266875,"sku":"IP-IPSGT-22.5-17","price":351.9,"currency_code":"GBP","in_stock":true},{"title":"18m","offer_id":56588508299643,"sku":"IP-IPSGT-22.5-18","price":372.6,"currency_code":"GBP","in_stock":true},{"title":"19m","offer_id":56588508332411,"sku":"IP-IPSGT-22.5-19","price":393.3,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":56588508365179,"sku":"IP-IPSGT-22.5-20","price":414.0,"currency_code":"GBP","in_stock":true},{"title":"21m","offer_id":56588508397947,"sku":"IP-IPSGT-22.5-21","price":434.7,"currency_code":"GBP","in_stock":true},{"title":"22m","offer_id":56588508430715,"sku":"IP-IPSGT-22.5-22","price":455.4,"currency_code":"GBP","in_stock":true},{"title":"23m","offer_id":56588508463483,"sku":"IP-IPSGT-22.5-23","price":476.1,"currency_code":"GBP","in_stock":true},{"title":"24m","offer_id":56588508496251,"sku":"IP-IPSGT-22.5-24","price":496.8,"currency_code":"GBP","in_stock":true},{"title":"25m full coil","offer_id":56588508529019,"sku":"IP-IPSGT-22.5-25","price":396.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-self-grip-top-seal-22-5mm-high-11m-to-25m-lengths-studio.jpg?v=1794961471","url":"https:\/\/industrial-polymers.co.uk\/products\/epdm-self-grip-top-seal-22-5mm-high-11m-to-25m-lengths","provider":"Industrial-polymers ","version":"1.0","type":"link"}