{"product_id":"epdm-sponge-boot-seal-12mm-x-17mm-custom-length","title":"EPDM Sponge Boot Seal – 12mm x 17mm Twin-Hollow, Self-Adhesive – 10m to 50m Lengths","description":"\u003cp\u003eA self-adhesive EPDM sponge boot seal, 12 mm wide and 17 mm high, with two hollow chambers stacked one on the other in a figure-8. The soft, skinned sponge (40° Shore OO) and the twin hollows let it squeeze down evenly and follow a lid that does not sit perfectly flat, keeping out water, draughts and dust. It is an aftermarket reproduction of the boot seal profile used on classic Jaguar XK models, and it works just as well on hatches, cabinet doors, enclosures and access panels.\u003c\/p\u003e\u003cp\u003eCut to your length in one continuous piece from 10 m to 49 m, or buy the full 50 m coil at a much lower price per metre. Black. Held in stock.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 12 mm wide × 17 mm high overall, figure-8 section\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChambers:\u003c\/strong\u003e Ø7 mm upper hollow over an 8 × 6 mm lower hollow, 2 mm walls and a 1.5 mm web between them\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e expanded (closed-cell) EPDM sponge with a smooth outer skin, 40° Shore OO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing:\u003c\/strong\u003e adhesive backing on the base: peel the liner and press on, no clips or glue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather:\u003c\/strong\u003e EPDM rated excellent for ozone, weather and UV; flexible at -40 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable route:\u003c\/strong\u003e the hollows can also carry a thin wire or cable, protected inside the seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrice:\u003c\/strong\u003e £23.17 per metre inc VAT for 10–49 m; £17.82 per metre as a 50 m coil (£891.00)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-boot-seal-12mm-x-17mm-technical-drawing.png?v=1795309390\" alt=\"Technical drawing: EPDM sponge boot seal cross-section, 12 mm wide x 17 mm high figure-8 with a 7 mm upper hollow, 8 x 6 mm lower hollow, 2 mm walls and 1.5 mm web, adhesive base\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e \u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProperty\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eTest method \/ basis\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e \u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eTwin-hollow figure-8 sponge seal on a flat self-adhesive base\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (across the base)\u003c\/td\u003e\n\u003ctd\u003e12.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal; tolerance BS 3734 Class E3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height (base to top)\u003c\/td\u003e\n\u003ctd\u003e17.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal; tolerance BS 3734 Class E3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper hollow\u003c\/td\u003e\n\u003ctd\u003eØ7 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLower hollow\u003c\/td\u003e\n\u003ctd\u003e8 mm wide × 6 mm high\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSide wall (upper chamber)\u003c\/td\u003e\n\u003ctd\u003e2 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeb between the chambers\u003c\/td\u003e\n\u003ctd\u003e1.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper lobe width \/ waist width\u003c\/td\u003e\n\u003ctd\u003eAbout 11 mm \/ about 10 mm\u003c\/td\u003e\n\u003ctd\u003eScaled from the manufacturer's drawing; not separately stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixing\u003c\/td\u003e\n\u003ctd\u003eAdhesive backing with peel-off liner on the base\u003c\/td\u003e\n\u003ctd\u003eManufacturer product page and datasheet (\"Adhesive Backed\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eExpanded (sponge) EPDM, skinned surface\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet and product page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack, non-marking\u003c\/td\u003e\n\u003ctd\u003eManufacturer product page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e40° Shore OO\u003c\/td\u003e\n\u003ctd\u003eShore OO durometer scale (for soft foams); test standard not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e0.5 to 0.9 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.07 kg\/m: about 3.5 kg per 50 m coil\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e25% maximum (datasheet, 24 h recovery) · 50% (product page, 22 h)\u003c\/td\u003e\n\u003ctd\u003eManufacturer figures; temperature and standard not stated. The two sources differ, so plan on the higher figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOven ageing\u003c\/td\u003e\n\u003ctd\u003e±30% change after 7 days at 70 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; property measured not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003e5% maximum\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeather \/ UV light resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent \/ excellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow-temperature flexibility\u003c\/td\u003e\n\u003ctd\u003ePass at -40 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMould growth resistance\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength \/ elongation \/ tear strength\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer for this sponge\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature range\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile. About -40 °C to +100 °C is typical for EPDM sponge, not tested on this profile\u003c\/td\u003e\n\u003ctd\u003eTested points stated: flexible at -40 °C, aged at +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eBS 3734 Class E3 (extruded sponge); sponge sizes are approximate\u003c\/td\u003e\n\u003ctd\u003eBS 3734\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eReproduction boot seal for classic Jaguar XK models; general lid, hatch and door sealing\u003c\/td\u003e\n\u003ctd\u003eManufacturer's product description\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied length\u003c\/td\u003e\n\u003ctd\u003eAny whole length from 10 m to 49 m as one continuous piece, or a full 50 m coil\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice per metre\u003c\/td\u003e\n\u003ctd\u003e£23.17\/m inc VAT for 10–49 m; £17.82\/m inc VAT as a full 50 m coil (£891.00)\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e \u003c\/table\u003e\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\u003cp\u003eClosed-cell expanded EPDM (ethylene propylene diene rubber) sponge with a smooth outer skin, extruded to BS 3734 Class E3 tolerances and supplied with an adhesive backing. EPDM is chosen for outdoor seals because it shrugs off ozone, weather and sunlight, and it resists water, steam, dilute acids, alkalis and ketones. It is \u003cstrong\u003enot\u003c\/strong\u003e resistant to petrol, oils or other hydrocarbon solvents, so keep it out of fuel and oil splash zones.\u003c\/p\u003e\u003cp\u003eThe manufacturer states no food-contact, drinking-water, fire-rating, REACH or RoHS approvals for this profile, so we do not claim any. Ask us if you need a compliant alternative.\u003c\/p\u003e\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\u003cp\u003eMeasure the full perimeter you want to seal and round up to the next whole metre, adding a little for joins. The 50 m coil (£891.00) costs less than any cut length from 39 m upward, so for 39 m or more the coil is the better buy.\u003c\/p\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eClean the mounting face with a solvent wipe (isopropyl alcohol) and let it dry. Fit above about 10 °C if you can, as the adhesive grabs best when warm.\u003c\/li\u003e\n\u003cli\u003ePeel back a short length of liner, place the seal and press down, then peel and press as you go. Do not stretch the sponge: it shrinks back and opens gaps at the joins.\u003c\/li\u003e\n\u003cli\u003eCut a few millimetres over-length with a sharp knife or scissors and butt the ends together under light compression. Join on a straight run rather than at a corner.\u003c\/li\u003e\n\u003cli\u003ePress firmly along the full length to bed the adhesive in, and leave the lid closed for a few hours if possible.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat gap will this seal fill?\u003c\/strong\u003e\u003cbr\u003eIt stands 17 mm high when free. It seals best when the lid squeezes it by about a third to a half, so a closed gap of roughly 8 to 12 mm is ideal. For a smaller gap choose a lower profile, or for a larger gap a taller one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it fit my Jaguar XK boot?\u003c\/strong\u003e\u003cbr\u003eIt is an aftermarket reproduction of the XK boot seal profile, made to the same 12 × 17 mm figure-8 section. Compare it with your old seal or the drawing above; if in doubt, send us a photo of the old section and we will check it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit it?\u003c\/strong\u003e\u003cbr\u003eIt is self-adhesive: clean and dry the surface, peel the liner and press it on. No clips, channels or glue are needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut with a sharp craft knife or scissors. Leave it a few millimetres long and push the ends together so the joint is under light compression. For a permanent join, a drop of cyanoacrylate (superglue) on the cut faces works well on EPDM sponge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperatures can it handle?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer tests it flexible at -40 °C and heat-ages it at +70 °C. EPDM sponge is typically used up to about +100 °C, but that is not tested on this profile.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it suitable for outdoor use?\u003c\/strong\u003e\u003cbr\u003eYes. EPDM is rated excellent for ozone, weather and UV resistance, and it absorbs no more than 5% water, so it suits exterior boot lids, hatches and enclosures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat else can I use it for?\u003c\/strong\u003e\u003cbr\u003eCabinet and enclosure doors, inspection hatches, caravan and trailer lockers, and as a soft anti-rattle cushion between panels. The hollows can also carry a thin cable or wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs my length sent in one piece?\u003c\/strong\u003e\u003cbr\u003eYes. Every length from 10 m to 49 m is cut as one continuous piece, and the 50 m option is a full coil.\u003c\/p\u003e\u003cp\u003eNeed help choosing a seal? \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e, call +44 1282 277786 or email sales@industrial-polymers.co.uk.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"10m","offer_id":56584918696315,"sku":"IP-EPDM-12X17-10M","price":231.66,"currency_code":"GBP","in_stock":true},{"title":"11m","offer_id":56584918729083,"sku":"IP-EPDM-12X17-11M","price":254.82,"currency_code":"GBP","in_stock":true},{"title":"12m","offer_id":56584918761851,"sku":"IP-EPDM-12X17-12M","price":277.98,"currency_code":"GBP","in_stock":true},{"title":"13m","offer_id":56584918794619,"sku":"IP-EPDM-12X17-13M","price":301.17,"currency_code":"GBP","in_stock":true},{"title":"14m","offer_id":56584918827387,"sku":"IP-EPDM-12X17-14M","price":324.33,"currency_code":"GBP","in_stock":true},{"title":"15m","offer_id":56584918860155,"sku":"IP-EPDM-12X17-15M","price":347.49,"currency_code":"GBP","in_stock":true},{"title":"16m","offer_id":56584918892923,"sku":"IP-EPDM-12X17-16M","price":370.65,"currency_code":"GBP","in_stock":true},{"title":"17m","offer_id":56584918925691,"sku":"IP-EPDM-12X17-17M","price":393.81,"currency_code":"GBP","in_stock":true},{"title":"18m","offer_id":56584918958459,"sku":"IP-EPDM-12X17-18M","price":417.0,"currency_code":"GBP","in_stock":true},{"title":"19m","offer_id":56584918991227,"sku":"IP-EPDM-12X17-19M","price":440.16,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":56584919023995,"sku":"IP-EPDM-12X17-20M","price":463.32,"currency_code":"GBP","in_stock":true},{"title":"21m","offer_id":56584919056763,"sku":"IP-EPDM-12X17-21M","price":486.48,"currency_code":"GBP","in_stock":true},{"title":"22m","offer_id":56584919089531,"sku":"IP-EPDM-12X17-22M","price":509.64,"currency_code":"GBP","in_stock":true},{"title":"23m","offer_id":56584919122299,"sku":"IP-EPDM-12X17-23M","price":532.83,"currency_code":"GBP","in_stock":true},{"title":"24m","offer_id":56584919155067,"sku":"IP-EPDM-12X17-24M","price":555.99,"currency_code":"GBP","in_stock":true},{"title":"25m","offer_id":56584919187835,"sku":"IP-EPDM-12X17-25M","price":579.15,"currency_code":"GBP","in_stock":true},{"title":"26m","offer_id":56584919220603,"sku":"IP-EPDM-12X17-26M","price":602.31,"currency_code":"GBP","in_stock":true},{"title":"27m","offer_id":56584919253371,"sku":"IP-EPDM-12X17-27M","price":625.47,"currency_code":"GBP","in_stock":true},{"title":"28m","offer_id":56584919286139,"sku":"IP-EPDM-12X17-28M","price":648.66,"currency_code":"GBP","in_stock":true},{"title":"29m","offer_id":56584919318907,"sku":"IP-EPDM-12X17-29M","price":671.82,"currency_code":"GBP","in_stock":true},{"title":"30m","offer_id":56584919351675,"sku":"IP-EPDM-12X17-30M","price":694.98,"currency_code":"GBP","in_stock":true},{"title":"31m","offer_id":56584919384443,"sku":"IP-EPDM-12X17-31M","price":718.14,"currency_code":"GBP","in_stock":true},{"title":"32m","offer_id":56584919417211,"sku":"IP-EPDM-12X17-32M","price":741.3,"currency_code":"GBP","in_stock":true},{"title":"33m","offer_id":56584919449979,"sku":"IP-EPDM-12X17-33M","price":764.49,"currency_code":"GBP","in_stock":true},{"title":"34m","offer_id":56584919482747,"sku":"IP-EPDM-12X17-34M","price":787.65,"currency_code":"GBP","in_stock":true},{"title":"35m","offer_id":56584919515515,"sku":"IP-EPDM-12X17-35M","price":810.81,"currency_code":"GBP","in_stock":true},{"title":"36m","offer_id":56584919548283,"sku":"IP-EPDM-12X17-36M","price":833.97,"currency_code":"GBP","in_stock":true},{"title":"37m","offer_id":56584919581051,"sku":"IP-EPDM-12X17-37M","price":857.13,"currency_code":"GBP","in_stock":true},{"title":"38m","offer_id":56584919613819,"sku":"IP-EPDM-12X17-38M","price":880.32,"currency_code":"GBP","in_stock":true},{"title":"39m","offer_id":56584919646587,"sku":"IP-EPDM-12X17-39M","price":903.48,"currency_code":"GBP","in_stock":true},{"title":"40m","offer_id":56584919679355,"sku":"IP-EPDM-12X17-40M","price":926.64,"currency_code":"GBP","in_stock":true},{"title":"41m","offer_id":56584919712123,"sku":"IP-EPDM-12X17-41M","price":949.8,"currency_code":"GBP","in_stock":true},{"title":"42m","offer_id":56584919744891,"sku":"IP-EPDM-12X17-42M","price":972.96,"currency_code":"GBP","in_stock":true},{"title":"43m","offer_id":56584919777659,"sku":"IP-EPDM-12X17-43M","price":996.15,"currency_code":"GBP","in_stock":true},{"title":"44m","offer_id":56584919810427,"sku":"IP-EPDM-12X17-44M","price":1019.31,"currency_code":"GBP","in_stock":true},{"title":"45m","offer_id":56584919843195,"sku":"IP-EPDM-12X17-45M","price":1042.47,"currency_code":"GBP","in_stock":true},{"title":"46m","offer_id":56584919875963,"sku":"IP-EPDM-12X17-46M","price":1065.63,"currency_code":"GBP","in_stock":true},{"title":"47m","offer_id":56584919908731,"sku":"IP-EPDM-12X17-47M","price":1088.79,"currency_code":"GBP","in_stock":true},{"title":"48m","offer_id":56584919941499,"sku":"IP-EPDM-12X17-48M","price":1111.98,"currency_code":"GBP","in_stock":true},{"title":"49m","offer_id":56584919974267,"sku":"IP-EPDM-12X17-49M","price":1135.14,"currency_code":"GBP","in_stock":true},{"title":"50m coil","offer_id":56584920007035,"sku":"IP-EPDM-12X17-50M","price":891.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-boot-seal-12mm-x-17mm-custom-length-detail.jpg?v=1794827495","url":"https:\/\/industrial-polymers.co.uk\/products\/epdm-sponge-boot-seal-12mm-x-17mm-custom-length","provider":"Industrial-polymers ","version":"1.0","type":"link"}