{"product_id":"epdm-sponge-boot-seal-20-8mm-x-21-2mm-6-3mm-channel-per-metre","title":"EPDM Sponge Boot Seal – 20.8mm x 21.2mm, 6.3mm Panel Slot – 10m to 49m or 50m Coil","description":"\u003cp\u003eThis \u003cstrong\u003eEPDM sponge boot seal, 20.8 mm wide x 21.2 mm high\u003c\/strong\u003e, is a one-piece expanded EPDM profile with an angled \u003cstrong\u003e6.3 mm slot\u003c\/strong\u003e. The slot pushes over a boot aperture flange or panel edge up to about 6.3 mm thick, and the soft sponge body closes the gap when the lid shuts. It is a correct-section replacement for classic saloon boot lid seals, and it works just as well on hatches, lids and access doors.\u003c\/p\u003e \u003cp\u003eChoose a cut length from \u003cstrong\u003e10 m to 49 m\u003c\/strong\u003e, supplied as one continuous piece, or a \u003cstrong\u003e50 m full coil\u003c\/strong\u003e at the lower coil rate. Held in stock for same-day dispatch.\u003c\/p\u003e \u003ch3\u003eAt a glance\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 20.8 mm W x 21.2 mm H, with a 6.3 mm angled panel slot\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e expanded (closed-cell) EPDM sponge, black, 40° Shore OO\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFixing:\u003c\/strong\u003e push-on over the flange; add a rubber-compatible adhesive in the slot for a permanent fit\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eWeather:\u003c\/strong\u003e excellent ozone, UV and weather resistance; passes flexibility at -40 °C\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.15 kg per metre\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePrice:\u003c\/strong\u003e £16.23 per metre inc VAT for 10–49 m; 50 m full coil £649.50 inc VAT (£12.99\/m)\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eTechnical drawing\u003c\/h3\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-boot-seal-20-8mm-x-21-2mm-technical-drawing.png?v=1795315055\" alt=\"Technical drawing of the EPDM sponge boot seal 20.8 mm x 21.2 mm: dimensioned cross-section showing 20.8 mm width, 21.2 mm height and 6.3 mm panel slot\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-boot-seal-20-8mm-x-21-2mm-fitted-panel-edge-illustration.png?v=1795315055\" alt=\"Illustration: 20.8 x 21.2 mm EPDM sponge boot seal pushed onto a 6 mm steel flange, end view at true proportions with a 10 mm scale bar\" width=\"1600\" height=\"1200\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e \u003ch3\u003eSpecification\u003c\/h3\u003e \u003ctable\u003e \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ basis\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e20.8 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing (nominal)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e21.2 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing (nominal)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003ePanel slot width\u003c\/td\u003e\n\u003ctd\u003e6.3 mm (fits panels \/ flanges up to approx. 6.3 mm)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing (nominal)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eSection type\u003c\/td\u003e\n\u003ctd\u003eSolid one-piece sponge with angled open slot; no metal carrier, no adhesive tape\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eBS 3734 Class E3 (sponge is compressible, so sizes are approximate)\u003c\/td\u003e\n\u003ctd\u003eBS 3734-1\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eExpanded EPDM sponge (closed cell)\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e40° Shore OO\u003c\/td\u003e\n\u003ctd\u003eShore OO durometer\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e0.5 – 0.9 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.15 kg per metre\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e25% max (24 h recovery) per data sheet; 50% (22 h) per product listing\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data (two published values)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003e5% maximum\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eOven ageing\u003c\/td\u003e\n\u003ctd\u003e±30% change after 7 days at 70 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eLow-temperature flexibility\u003c\/td\u003e\n\u003ctd\u003ePass at -40 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eWeather resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eUV light resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eMould growth resistance\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003eapprox. -40 °C to +100 °C (typical for EPDM sponge, not tested on this profile)\u003c\/td\u003e\n\u003ctd\u003eGeneric material guidance only\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTensile strength, elongation, tear\u003c\/td\u003e\n\u003ctd\u003eNot published for this profile\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eLengths\u003c\/td\u003e\n\u003ctd\u003e10 m to 49 m in 1 m steps (one piece), or 50 m full coil\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch3\u003eMaterials and compliance\u003c\/h3\u003e \u003cp\u003eExpanded EPDM is a closed-cell synthetic rubber sponge chosen for outdoor sealing: it shrugs off ozone, UV and weathering, stays flexible in frost and does not support mould growth. The manufacturer does not state any food-contact, potable-water, flame-retardancy or RoHS\/REACH approval for this profile, so none is claimed here. If you need a certificate for a specific approval, \u003ca href=\"\/pages\/contact\"\u003eask us before ordering\u003c\/a\u003e.\u003c\/p\u003e \u003ch3\u003eWhich one do I need?\u003c\/h3\u003e \u003ctable\u003e \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003ctd\u003eEPDM sponge boot seal 20.8 x 21.2 mm, 6.3 mm slot (this product)\u003c\/td\u003e\n\u003ctd\u003eDeep gaps; push-on over thick flanges up to about 6.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-boot-seal-16mm-x-13-5mm-per-metre\"\u003eEPDM sponge boot seal 16 x 13.5 mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSmaller gaps; thin flanges (3 mm slot)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-boot-seal-12mm-x-17mm-custom-length\"\u003eEPDM sponge boot seal 12 x 17 mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSelf-adhesive twin-hollow seal for flat faces\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-door-seal-15mm-x-18mm-cut-lengths\"\u003eEPDM sponge door seal 15 x 18 mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSelf-adhesive dual-hardness seal for frames without a flange\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch3\u003eHow much do I need?\u003c\/h3\u003e \u003cp\u003eMeasure every edge the seal runs along and add about 5% for trimming. Example: a boot opening of 1.2 m x 0.9 m has a perimeter of 2 x (1.2 + 0.9) = 4.2 m, so the 10 m minimum length covers two openings. Order the whole run as one length so there is only one joint. From 41 m upward the 50 m full coil costs less than a cut length.\u003c\/p\u003e \u003ch3\u003eFitting tips\u003c\/h3\u003e \u003col\u003e \u003cli\u003eClean the flange and remove rust, old seal and sealant so the slot seats fully.\u003c\/li\u003e \u003cli\u003eStart at the bottom centre of the opening with the slot facing the flange and press it on with your thumbs, working round in one direction.\u003c\/li\u003e \u003cli\u003eEase the seal round corners rather than stretching it; stretched sponge shrinks back and opens a gap.\u003c\/li\u003e \u003cli\u003eLeave the end slightly long, then cut square with a sharp knife so the two ends butt under light compression.\u003c\/li\u003e \u003cli\u003eFor a permanent fit, run a thin bead of rubber-compatible adhesive inside the slot, and bond the butt joint with a cyanoacrylate rubber glue.\u003c\/li\u003e \u003c\/ol\u003e \u003ch3\u003eFrequently asked questions\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eWhat thickness of panel does this boot seal fit?\u003c\/strong\u003e\u003cbr\u003eThe slot is 6.3 mm wide, so it grips flanges and panel edges up to about 6.3 mm thick. On thinner metal it will still sit, but add adhesive in the slot so it cannot pull off.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHow do I know this is the right size for my car or hatch?\u003c\/strong\u003e\u003cbr\u003eCut a short piece of your old seal and compare the end section with the technical drawing above: 20.8 mm across, 21.2 mm high, with one angled slot. Also check that your flange is no thicker than about 6.3 mm and that the closed lid will press a few millimetres into the sponge.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat can it be used for besides a boot lid?\u003c\/strong\u003e\u003cbr\u003eAny push-on edge seal where a soft, deep sponge is needed: tailgates, engine covers, trailer and plant lids, steel cabinet doors, access hatches and enclosure covers.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat is expanded EPDM sponge?\u003c\/strong\u003e\u003cbr\u003eIt is EPDM synthetic rubber foamed into tiny closed cells. The cells make it soft (40° Shore OO) so it seals with little closing force, while the EPDM base gives excellent resistance to ozone, UV, rain and frost.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat temperatures will it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer confirms it stays flexible at -40 °C and passes 7 days ageing at 70 °C. EPDM sponge is typically used up to about +100 °C, but that upper figure has not been tested on this profile.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut with a sharp craft knife or scissors, square across the section. Butt the two ends together under light compression and bond them with a cyanoacrylate glue suited to rubber.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIs it supplied in one piece?\u003c\/strong\u003e\u003cbr\u003eYes. Every length from 10 m to 49 m is cut as one continuous piece, and the 50 m option is a full uncut coil.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDoes it have an adhesive backing?\u003c\/strong\u003e\u003cbr\u003eNo. It is a push-on seal held by the slot; use adhesive in the slot if you want it permanently fixed.\u003c\/p\u003e \u003cp\u003eNeed help choosing a seal? \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e, call +44 1282 277786 or email sales@industrial-polymers.co.uk.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"10 m","offer_id":56592900129147,"sku":"IP-EPDMS-20.8X21.2-10M","price":162.3,"currency_code":"GBP","in_stock":true},{"title":"11 m","offer_id":56594072437115,"sku":"IP-EPDMS-20.8X21.2-11M","price":178.53,"currency_code":"GBP","in_stock":true},{"title":"12 m","offer_id":56594072469883,"sku":"IP-EPDMS-20.8X21.2-12M","price":194.76,"currency_code":"GBP","in_stock":true},{"title":"13 m","offer_id":56594072502651,"sku":"IP-EPDMS-20.8X21.2-13M","price":210.99,"currency_code":"GBP","in_stock":true},{"title":"14 m","offer_id":56594072535419,"sku":"IP-EPDMS-20.8X21.2-14M","price":227.22,"currency_code":"GBP","in_stock":true},{"title":"15 m","offer_id":56594072568187,"sku":"IP-EPDMS-20.8X21.2-15M","price":243.45,"currency_code":"GBP","in_stock":true},{"title":"16 m","offer_id":56594072600955,"sku":"IP-EPDMS-20.8X21.2-16M","price":259.68,"currency_code":"GBP","in_stock":true},{"title":"17 m","offer_id":56594072633723,"sku":"IP-EPDMS-20.8X21.2-17M","price":275.91,"currency_code":"GBP","in_stock":true},{"title":"18 m","offer_id":56594072666491,"sku":"IP-EPDMS-20.8X21.2-18M","price":292.14,"currency_code":"GBP","in_stock":true},{"title":"19 m","offer_id":56594072699259,"sku":"IP-EPDMS-20.8X21.2-19M","price":308.37,"currency_code":"GBP","in_stock":true},{"title":"20 m","offer_id":56594072732027,"sku":"IP-EPDMS-20.8X21.2-20M","price":324.6,"currency_code":"GBP","in_stock":true},{"title":"21 m","offer_id":56594072764795,"sku":"IP-EPDMS-20.8X21.2-21M","price":340.83,"currency_code":"GBP","in_stock":true},{"title":"22 m","offer_id":56594072797563,"sku":"IP-EPDMS-20.8X21.2-22M","price":357.06,"currency_code":"GBP","in_stock":true},{"title":"23 m","offer_id":56594072830331,"sku":"IP-EPDMS-20.8X21.2-23M","price":373.29,"currency_code":"GBP","in_stock":true},{"title":"24 m","offer_id":56594072863099,"sku":"IP-EPDMS-20.8X21.2-24M","price":389.52,"currency_code":"GBP","in_stock":true},{"title":"25 m","offer_id":56594072895867,"sku":"IP-EPDMS-20.8X21.2-25M","price":405.75,"currency_code":"GBP","in_stock":true},{"title":"26 m","offer_id":56594072928635,"sku":"IP-EPDMS-20.8X21.2-26M","price":421.98,"currency_code":"GBP","in_stock":true},{"title":"27 m","offer_id":56594072961403,"sku":"IP-EPDMS-20.8X21.2-27M","price":438.21,"currency_code":"GBP","in_stock":true},{"title":"28 m","offer_id":56594072994171,"sku":"IP-EPDMS-20.8X21.2-28M","price":454.44,"currency_code":"GBP","in_stock":true},{"title":"29 m","offer_id":56594073026939,"sku":"IP-EPDMS-20.8X21.2-29M","price":470.67,"currency_code":"GBP","in_stock":true},{"title":"30 m","offer_id":56594073059707,"sku":"IP-EPDMS-20.8X21.2-30M","price":486.9,"currency_code":"GBP","in_stock":true},{"title":"31 m","offer_id":56594073092475,"sku":"IP-EPDMS-20.8X21.2-31M","price":503.13,"currency_code":"GBP","in_stock":true},{"title":"32 m","offer_id":56594073125243,"sku":"IP-EPDMS-20.8X21.2-32M","price":519.36,"currency_code":"GBP","in_stock":true},{"title":"33 m","offer_id":56594073158011,"sku":"IP-EPDMS-20.8X21.2-33M","price":535.59,"currency_code":"GBP","in_stock":true},{"title":"34 m","offer_id":56594073190779,"sku":"IP-EPDMS-20.8X21.2-34M","price":551.82,"currency_code":"GBP","in_stock":true},{"title":"35 m","offer_id":56594073223547,"sku":"IP-EPDMS-20.8X21.2-35M","price":568.05,"currency_code":"GBP","in_stock":true},{"title":"36 m","offer_id":56594073256315,"sku":"IP-EPDMS-20.8X21.2-36M","price":584.28,"currency_code":"GBP","in_stock":true},{"title":"37 m","offer_id":56594073289083,"sku":"IP-EPDMS-20.8X21.2-37M","price":600.51,"currency_code":"GBP","in_stock":true},{"title":"38 m","offer_id":56594073321851,"sku":"IP-EPDMS-20.8X21.2-38M","price":616.74,"currency_code":"GBP","in_stock":true},{"title":"39 m","offer_id":56594073354619,"sku":"IP-EPDMS-20.8X21.2-39M","price":632.97,"currency_code":"GBP","in_stock":true},{"title":"40 m","offer_id":56594073387387,"sku":"IP-EPDMS-20.8X21.2-40M","price":649.2,"currency_code":"GBP","in_stock":true},{"title":"41 m","offer_id":56594073420155,"sku":"IP-EPDMS-20.8X21.2-41M","price":665.43,"currency_code":"GBP","in_stock":true},{"title":"42 m","offer_id":56594073452923,"sku":"IP-EPDMS-20.8X21.2-42M","price":681.66,"currency_code":"GBP","in_stock":true},{"title":"43 m","offer_id":56594073485691,"sku":"IP-EPDMS-20.8X21.2-43M","price":697.89,"currency_code":"GBP","in_stock":true},{"title":"44 m","offer_id":56594073518459,"sku":"IP-EPDMS-20.8X21.2-44M","price":714.12,"currency_code":"GBP","in_stock":true},{"title":"45 m","offer_id":56594073551227,"sku":"IP-EPDMS-20.8X21.2-45M","price":730.35,"currency_code":"GBP","in_stock":true},{"title":"46 m","offer_id":56594073583995,"sku":"IP-EPDMS-20.8X21.2-46M","price":746.58,"currency_code":"GBP","in_stock":true},{"title":"47 m","offer_id":56594073616763,"sku":"IP-EPDMS-20.8X21.2-47M","price":762.81,"currency_code":"GBP","in_stock":true},{"title":"48 m","offer_id":56594073649531,"sku":"IP-EPDMS-20.8X21.2-48M","price":779.04,"currency_code":"GBP","in_stock":true},{"title":"49 m","offer_id":56594073682299,"sku":"IP-EPDMS-20.8X21.2-49M","price":795.27,"currency_code":"GBP","in_stock":true},{"title":"50 m (full coil)","offer_id":56594073715067,"sku":"IP-EPDMS-20.8X21.2-50M-COIL","price":649.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-boot-seal-20-8mm-x-21-2mm-6-3mm-channel-per-metr-studio.jpg?v=1795179382","url":"https:\/\/industrial-polymers.co.uk\/products\/epdm-sponge-boot-seal-20-8mm-x-21-2mm-6-3mm-channel-per-metre","provider":"Industrial-polymers ","version":"1.0","type":"link"}