{"product_id":"epdm-sponge-caravan-seal-9mm-x-14mm-dual-hardness-cut-length","title":"EPDM Sponge Caravan Seal – 9mm x 14mm Dual Hardness – Cut Length or 50m Coil","description":"\u003cp\u003eA black \u003cstrong\u003edual-hardness EPDM caravan seal, 9 mm wide by 14 mm high\u003c\/strong\u003e. A soft 10 mm hollow sponge bulb sits on a solid rubber T-foot with a 5 mm base, and the foot slides or pushes into the slotted channel found around caravan and motorhome doors, windows, lockers and shower cubicles. When the door closes, the bulb compresses and fills uneven gaps to keep out draughts and rain. It is supplied as one continuous length, 15 m to 49 m, or as a full 50 m coil, and is held in stock for dispatch.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 9 mm wide x 14 mm high overall: 10 mm sponge bulb on a 4 mm foot with a 5 mm base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo hardnesses in one strip:\u003c\/strong\u003e 70° Shore A solid EPDM foot grips the slot; 40° Shore OO sponge bulb seals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e ozone, weather and UV resistance rated excellent; flexible at -40 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow water uptake:\u003c\/strong\u003e sponge absorbs 5% maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-marking\u003c\/strong\u003e, cuts cleanly with a sharp knife\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLengths:\u003c\/strong\u003e any whole metre from 15 m to 49 m in one piece, or a 50 m coil at the lowest price per metre\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my frame?\u003c\/h3\u003e\n\u003cp\u003eThis seal is for frames with a \u003cstrong\u003eslot\u003c\/strong\u003e: a narrow mouth with a wider chamber behind it that holds the T-foot. The foot is 5 mm wide, so the chamber needs to be at least 5 mm wide. It is not self-adhesive and will not stay on a flat surface without a slot. If your old seal has a similar round bulb on a T-shaped foot, measure its overall height and width and compare them with the drawing below. If you are unsure, email a photo of the cut end next to a ruler to \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e and we will check it for you.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-caravan-seal-9mm-x-14mm-technical-drawing.png?v=1795163186\" alt=\"Technical drawing of the EPDM sponge caravan seal: 9 mm wide, 14 mm high, 10 mm sponge bulb, 5 mm T-foot base\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProperty\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eTest method \/ basis\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eHollow sponge bulb on a solid T-foot (push-in \/ slide-in seal)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (across the bulb)\u003c\/td\u003e\n\u003ctd\u003e9.0 mm (data sheet drawing: 8.5 mm)\u003c\/td\u003e\n\u003ctd\u003eNominal; tolerance BS 3734 Class E3. The product page and data sheet differ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height (foot to top of bulb)\u003c\/td\u003e\n\u003ctd\u003e14.0 mm (data sheet drawing: 14.5 mm)\u003c\/td\u003e\n\u003ctd\u003eNominal; tolerance BS 3734 Class E3. The product page and data sheet differ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSponge bulb height\u003c\/td\u003e\n\u003ctd\u003e10.0 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFoot height below the bulb\u003c\/td\u003e\n\u003ctd\u003e4.0 mm\u003c\/td\u003e\n\u003ctd\u003eWorked out from 14 mm overall less 10 mm bulb; not separately stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase (T-foot) width\u003c\/td\u003e\n\u003ctd\u003e5.0 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStem width, flange thickness, bulb wall, core size\u003c\/td\u003e\n\u003ctd\u003eNot stated\u003c\/td\u003e\n\u003ctd\u003eShown indicatively on our drawing only. Send us your slot size if the fit is tight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003ctd\u003eA slotted groove in a door, window, locker or shower frame with a chamber at least 5 mm wide behind a narrower mouth\u003c\/td\u003e\n\u003ctd\u003eFrom the 5 mm foot width; check your frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial: foot\u003c\/td\u003e\n\u003ctd\u003eSolid (dense) EPDM rubber\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial: bulb\u003c\/td\u003e\n\u003ctd\u003eExpanded (sponge) EPDM\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness: solid foot\u003c\/td\u003e\n\u003ctd\u003e70° Shore A (data sheet: 65–75 IRHD)\u003c\/td\u003e\n\u003ctd\u003eShore A \/ IRHD; test standard not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness: sponge bulb\u003c\/td\u003e\n\u003ctd\u003e40° Shore OO\u003c\/td\u003e\n\u003ctd\u003eShore OO durometer scale (for soft foams); test standard not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (solid EPDM)\u003c\/td\u003e\n\u003ctd\u003e10 MPa\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break (solid EPDM)\u003c\/td\u003e\n\u003ctd\u003e500%\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength (solid EPDM)\u003c\/td\u003e\n\u003ctd\u003e50 kN\/m\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set (solid EPDM)\u003c\/td\u003e\n\u003ctd\u003e21% after 22 h at 70 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet; standard not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set (sponge bulb)\u003c\/td\u003e\n\u003ctd\u003e25% maximum (data sheet, 24 h recovery) · 50% (product page, 22 h)\u003c\/td\u003e\n\u003ctd\u003eManufacturer figures; temperature and standard not stated. The two sources differ, so plan on the higher figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing (solid EPDM), 70 h at 70 °C\u003c\/td\u003e\n\u003ctd\u003eHardness change 0 IRHD · tensile change +9% · elongation change 0\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing (sponge), 7 days at 70 °C\u003c\/td\u003e\n\u003ctd\u003e±30% change\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet; property measured not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance (solid EPDM)\u003c\/td\u003e\n\u003ctd\u003eNo cracks after 72 h at 40 °C, 22 pphm, extended\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSponge density\u003c\/td\u003e\n\u003ctd\u003e0.5 to 0.9 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption (sponge)\u003c\/td\u003e\n\u003ctd\u003e5% maximum\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow-temperature flexibility\u003c\/td\u003e\n\u003ctd\u003ePass at -40 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone, weather and UV resistance (sponge)\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMould growth resistance\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature range\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile. Typical for EPDM: about -40 °C to +100 °C (typical for EPDM, not tested on this profile)\u003c\/td\u003e\n\u003ctd\u003eTested points stated: flexible at -40 °C, aged at +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e116 g\/m (product page) · 50 g\/m (data sheet)\u003c\/td\u003e\n\u003ctd\u003eManufacturer figures; the two sources differ. We ship on the higher figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eBS 3734 Class E3 (extruded sponge)\u003c\/td\u003e\n\u003ctd\u003eBS 3734\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied length\u003c\/td\u003e\n\u003ctd\u003eOne continuous length, 15 m to 49 m in 1 m steps, or a full 50 m coil\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice per metre\u003c\/td\u003e\n\u003ctd\u003e£12.77\/m inc VAT for cut lengths · £9.90\/m on the 50 m coil (£495.00)\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eSolid EPDM foot co-extruded with an expanded (sponge) EPDM bulb. The manufacturer describes it as non-marking, air and watertight, and resistant to heat, ozone, weather, steam, ketones and dilute acids and alkalis.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer does \u003cstrong\u003enot\u003c\/strong\u003e state any food-contact (FDA, EC 1935\/2004), drinking-water (WRAS), REACH, RoHS or fire-rating approval for this profile, so we do not claim any. If your application needs a certified material, ask us before you order.\u003c\/p\u003e\n\n\u003ch3\u003eChoosing a length\u003c\/h3\u003e\n\u003cp\u003eCut lengths are £12.77 per metre inc VAT (15 m = £191.58, 20 m = £255.42, 30 m = £383.13). The full \u003cstrong\u003e50 m coil is £495.00, only £9.90 per metre\u003c\/strong\u003e, so if you need \u003cstrong\u003e39 m or more\u003c\/strong\u003e the coil costs less than the cut length. Measure the full run of each slot, add about 5% for trimming and for easing the seal round corners, and round up to the next metre. A typical 1.8 m x 0.6 m caravan entrance door has a 4.8 m perimeter, so three doors or lockers of that size need about 15 m.\u003c\/p\u003e\n\n\u003ch3\u003eHow to fit it\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-caravan-seal-9mm-x-14mm-fitted-door-frame.png?v=1795163187\" alt=\"Fitting illustration: the 5 mm T-foot slid into a slotted caravan door frame, door open and door closed\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePull out the old seal and clean the slot of dirt, old sealant and grit.\u003c\/li\u003e\n\u003cli\u003eStart at the bottom of the frame, away from the hinge side, and feed the T-foot into the end of the slot or press it in with your thumbs. A little soapy water helps it slide.\u003c\/li\u003e\n\u003cli\u003eWork round the frame without stretching the seal: stretched EPDM shortens back and leaves gaps at the joints.\u003c\/li\u003e\n\u003cli\u003eAt corners, ease the seal round in a gentle curve rather than cutting it, so the bulb does not kink.\u003c\/li\u003e\n\u003cli\u003eLeave 5 mm extra at the end, then cut square with a sharp knife and push the two ends tightly together. A spot of rubber-compatible adhesive on the butt joint stops it opening up.\u003c\/li\u003e\n\u003cli\u003eClose the door and check that it shuts without forcing: with the bulb about a third compressed, the door should close easily and seal along its full length.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the right seal for my caravan door?\u003c\/strong\u003e\u003cbr\u003eIt suits doors, windows and lockers whose frames have a slot that takes a T-shaped foot about 5 mm wide. Compare your old seal with the drawing: if it is a round sponge bulb about 9 mm wide and 14 mm tall on a T-foot, this is the match. Many different seals are used across makes and years, so check the cut end before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need glue to fit it?\u003c\/strong\u003e\u003cbr\u003eNo. The solid foot is held by the slot. Adhesive is only worth using on the butt joint where the two ends meet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much does the bulb compress, and what gap does it seal?\u003c\/strong\u003e\u003cbr\u003eThe sponge bulb is 10 mm tall and is designed to be squashed. As a guide, it seals best with the door closing to leave about 6 to 8 mm between the door and the frame face, so the bulb is compressed by about a third. Much tighter than that and the door may be hard to shut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it outdoors and in winter?\u003c\/strong\u003e\u003cbr\u003eYes. EPDM is the standard outdoor seal rubber: the manufacturer rates its ozone, weather and UV resistance as excellent and it passes a flexibility test at -40 °C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it in a shower or washroom?\u003c\/strong\u003e\u003cbr\u003eYes, the manufacturer lists shower seals as a use. The sponge absorbs no more than 5% water and mould growth resistance is rated very good. It is not approved for food or drinking-water contact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut square with a sharp knife or scissors. Push the ends together tightly when you finish a run; a small amount of rubber-compatible adhesive keeps the joint closed. Ease it round corners rather than mitring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are the sizes on the data sheet slightly different?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer's product page says 9 x 14 mm and its data sheet drawing says 8.5 x 14.5 mm. Both are within the normal tolerance for soft sponge extrusions (BS 3734 Class E3), and we show both so you can judge the fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it come in one piece?\u003c\/strong\u003e\u003cbr\u003eYes. Every length from 15 m to 49 m is cut as one continuous strip, and the 50 m option is a full unbroken coil.\u003c\/p\u003e\n\n\u003ch3\u003eData sheet\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-caravan-seal-9mm-x-14mm-data-sheet.pdf?v=1795163186\" target=\"_blank\" rel=\"noopener\"\u003eDownload the technical data sheet (PDF)\u003c\/a\u003e with the drawing, full specification and compliance notes.\u003c\/p\u003e\n\n\u003ch3\u003eComplete your project\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-sponge-rubber-strip-3mm-thick-25m-roll\"\u003eSilicone Sponge Rubber Strip – 3mm Thick – 25m Roll\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/self-grip-epdm-top-seal-6mm-x-15mm-profile-cut-to-length\"\u003eSelf-Grip EPDM Top Seal – 6mm x 15mm – Sponge Bulb, Fits 1.6mm Panels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/tpe-u-channel-12mm-x-17-5mm-for-4-5mm-panels-50m-coil\"\u003eTPE U Channel – 12mm x 17.5mm for 4.5mm Panels – 50m Coil\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eNeed help choosing the right profile? Call \u003ca href=\"tel:+441282277786\"\u003e+44 1282 277786\u003c\/a\u003e, email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003econtact our team\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"15m","offer_id":56590864286075,"sku":"IP-EPDM-9X14-15M","price":191.58,"currency_code":"GBP","in_stock":true},{"title":"16m","offer_id":56590929625467,"sku":"IP-EPDM-9X14-16M","price":204.33,"currency_code":"GBP","in_stock":true},{"title":"17m","offer_id":56590929658235,"sku":"IP-EPDM-9X14-17M","price":217.11,"currency_code":"GBP","in_stock":true},{"title":"18m","offer_id":56590929691003,"sku":"IP-EPDM-9X14-18M","price":229.89,"currency_code":"GBP","in_stock":true},{"title":"19m","offer_id":56590929723771,"sku":"IP-EPDM-9X14-19M","price":242.64,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":56590929756539,"sku":"IP-EPDM-9X14-20M","price":255.42,"currency_code":"GBP","in_stock":true},{"title":"21m","offer_id":56590929789307,"sku":"IP-EPDM-9X14-21M","price":268.2,"currency_code":"GBP","in_stock":true},{"title":"22m","offer_id":56590929822075,"sku":"IP-EPDM-9X14-22M","price":280.95,"currency_code":"GBP","in_stock":true},{"title":"23m","offer_id":56590929854843,"sku":"IP-EPDM-9X14-23M","price":293.73,"currency_code":"GBP","in_stock":true},{"title":"24m","offer_id":56590929887611,"sku":"IP-EPDM-9X14-24M","price":306.51,"currency_code":"GBP","in_stock":true},{"title":"25m","offer_id":56590929920379,"sku":"IP-EPDM-9X14-25M","price":319.29,"currency_code":"GBP","in_stock":true},{"title":"26m","offer_id":56590929953147,"sku":"IP-EPDM-9X14-26M","price":332.04,"currency_code":"GBP","in_stock":true},{"title":"27m","offer_id":56590929985915,"sku":"IP-EPDM-9X14-27M","price":344.82,"currency_code":"GBP","in_stock":true},{"title":"28m","offer_id":56590930018683,"sku":"IP-EPDM-9X14-28M","price":357.6,"currency_code":"GBP","in_stock":true},{"title":"29m","offer_id":56590930051451,"sku":"IP-EPDM-9X14-29M","price":370.35,"currency_code":"GBP","in_stock":true},{"title":"30m","offer_id":56590930084219,"sku":"IP-EPDM-9X14-30M","price":383.13,"currency_code":"GBP","in_stock":true},{"title":"31m","offer_id":56590930116987,"sku":"IP-EPDM-9X14-31M","price":395.91,"currency_code":"GBP","in_stock":true},{"title":"32m","offer_id":56590930149755,"sku":"IP-EPDM-9X14-32M","price":408.66,"currency_code":"GBP","in_stock":true},{"title":"33m","offer_id":56590930182523,"sku":"IP-EPDM-9X14-33M","price":421.44,"currency_code":"GBP","in_stock":true},{"title":"34m","offer_id":56590930215291,"sku":"IP-EPDM-9X14-34M","price":434.22,"currency_code":"GBP","in_stock":true},{"title":"35m","offer_id":56590930248059,"sku":"IP-EPDM-9X14-35M","price":447.0,"currency_code":"GBP","in_stock":true},{"title":"36m","offer_id":56590930280827,"sku":"IP-EPDM-9X14-36M","price":459.75,"currency_code":"GBP","in_stock":true},{"title":"37m","offer_id":56590930313595,"sku":"IP-EPDM-9X14-37M","price":472.53,"currency_code":"GBP","in_stock":true},{"title":"38m","offer_id":56590930346363,"sku":"IP-EPDM-9X14-38M","price":485.31,"currency_code":"GBP","in_stock":true},{"title":"39m","offer_id":56590930379131,"sku":"IP-EPDM-9X14-39M","price":498.06,"currency_code":"GBP","in_stock":true},{"title":"40m","offer_id":56590930411899,"sku":"IP-EPDM-9X14-40M","price":510.84,"currency_code":"GBP","in_stock":true},{"title":"41m","offer_id":56590930444667,"sku":"IP-EPDM-9X14-41M","price":523.62,"currency_code":"GBP","in_stock":true},{"title":"42m","offer_id":56590930477435,"sku":"IP-EPDM-9X14-42M","price":536.37,"currency_code":"GBP","in_stock":true},{"title":"43m","offer_id":56590930510203,"sku":"IP-EPDM-9X14-43M","price":549.15,"currency_code":"GBP","in_stock":true},{"title":"44m","offer_id":56590930542971,"sku":"IP-EPDM-9X14-44M","price":561.93,"currency_code":"GBP","in_stock":true},{"title":"45m","offer_id":56590930575739,"sku":"IP-EPDM-9X14-45M","price":574.71,"currency_code":"GBP","in_stock":true},{"title":"46m","offer_id":56590930608507,"sku":"IP-EPDM-9X14-46M","price":587.46,"currency_code":"GBP","in_stock":true},{"title":"47m","offer_id":56590930641275,"sku":"IP-EPDM-9X14-47M","price":600.24,"currency_code":"GBP","in_stock":true},{"title":"48m","offer_id":56590930674043,"sku":"IP-EPDM-9X14-48M","price":613.02,"currency_code":"GBP","in_stock":true},{"title":"49m","offer_id":56590930706811,"sku":"IP-EPDM-9X14-49M","price":625.77,"currency_code":"GBP","in_stock":true},{"title":"50m coil","offer_id":56590930739579,"sku":"IP-EPDM-9X14-50M","price":495.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-caravan-seal-9mm-x-14mm-dual-hardness-cut-length-studio.jpg?v=1795083437","url":"https:\/\/industrial-polymers.co.uk\/products\/epdm-sponge-caravan-seal-9mm-x-14mm-dual-hardness-cut-length","provider":"Industrial-polymers ","version":"1.0","type":"link"}