{"product_id":"epdm-sponge-crown-strip-10mm-x-5mm-100m-coil","title":"EPDM Sponge Crown Strip – 10mm x 5mm, Self-Adhesive – 100m Coil","description":"\u003cp\u003e\u003cstrong\u003eA low-profile black EPDM sponge seal, 10 mm wide and only 5 mm high, with a peel-and-stick adhesive base. One continuous 100 m coil.\u003c\/strong\u003e Two rounded crowns and a lower centre rib press flat when a lid, hatch or door closes on them, giving three sealing lines across the face. Use it where there is little room for a seal, or as a soft, discreet bump strip on panel edges.\u003c\/p\u003e \u003ch3\u003eAt a glance\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10 mm wide × 5 mm high; 2.5 mm crowns, 4 mm at the groove floor\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFixing:\u003c\/strong\u003e factory-applied adhesive backing with a peel-off liner; sticks to clean metal, plastic, wood and rubber\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e solid expanded (sponge) EPDM, very soft at 40° Shore OO, non-marking\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eOutdoors:\u003c\/strong\u003e rated excellent for ozone, weather and UV; flexible at -40 °C\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCoil:\u003c\/strong\u003e 100 m continuous length, black, about £2.35 per metre\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eStock:\u003c\/strong\u003e held in stock in the UK and dispatched from stock\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eTypical uses\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eLid and door seals on electrical enclosures, control boxes, equipment cases and cabinets\u003c\/li\u003e \u003cli\u003eDraught and dust strips on light doors, hatches, access panels and glazed closures\u003c\/li\u003e \u003cli\u003eLow-profile weather strips on vehicles, trailers, caravans and boats\u003c\/li\u003e \u003cli\u003eAnti-rattle and vibration pads between panels, covers and housings\u003c\/li\u003e \u003cli\u003eSoft, discreet impact protection on edges, shelving and display fittings\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eTechnical drawing\u003c\/h3\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-crown-strip-10mm-x-5mm-technical-drawing.png?v=1795220555\" alt=\"Technical drawing of the EPDM sponge crown strip: 10 mm wide, 5 mm high, 4 mm at the groove floor, 2.5 mm crowns, adhesive-backed base\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e \u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e \u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProperty\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eTest method \/ basis\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eSolid crown strip: two rounded outer crowns and a low centre rib on a flat, self-adhesive base\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eOverall width (across the base)\u003c\/td\u003e\n\u003ctd\u003e10.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal; tolerance BS 3734 Class E3\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eOverall height (base to top of crowns)\u003c\/td\u003e\n\u003ctd\u003e5.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal; tolerance BS 3734 Class E3\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHeight at the groove floor\u003c\/td\u003e\n\u003ctd\u003e4.0 mm (grooves about 1 mm deep)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eCrown width (each outer crown)\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eCentre rib\u003c\/td\u003e\n\u003ctd\u003eLower than the crowns; height not stated\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing (shape only)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eFixing\u003c\/td\u003e\n\u003ctd\u003eFactory-applied adhesive backing with peel-off liner\u003c\/td\u003e\n\u003ctd\u003eAdhesive type and thickness not stated by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eExpanded (sponge) EPDM\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e40° Shore OO\u003c\/td\u003e\n\u003ctd\u003eShore OO durometer scale (for soft foams); test standard not stated\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e0.5 to 0.9 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e14 g\/m (technical table) to 20 g\/m (product summary and datasheet): about 1.4 to 2.0 kg per 100 m coil\u003c\/td\u003e\n\u003ctd\u003eManufacturer figures; the sources differ\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003e5% maximum\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e25% maximum (datasheet, 24 h recovery) · 50% (product page, 22 h)\u003c\/td\u003e\n\u003ctd\u003eManufacturer figures; test temperature and standard not stated. The two sources differ, so plan on the higher figure\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHeat ageing\u003c\/td\u003e\n\u003ctd\u003e±30% change after 7 days at 70 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; property measured not stated\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eLow-temperature flexibility\u003c\/td\u003e\n\u003ctd\u003ePass at -40 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eWeather resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eUV light resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eMould growth resistance\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eService temperature range\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile. About -40 °C to +100 °C (typical for EPDM sponge, not tested on this profile)\u003c\/td\u003e\n\u003ctd\u003eTested points stated: flexible at -40 °C, aged at +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTensile strength, elongation at break, tear strength\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need them\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eBS 3734 Class E3 (extruded sponge)\u003c\/td\u003e\n\u003ctd\u003eBS 3734\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eSupplied length\u003c\/td\u003e\n\u003ctd\u003e100 m continuous coil\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003ePrice per metre\u003c\/td\u003e\n\u003ctd\u003eAbout £2.35\/m inc VAT (£235.41 per 100 m coil)\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp\u003e\u003csmall\u003eThe manufacturer gives two weights (14 g\/m and 0.02 kg\/m) and two compression-set figures for this part; both are shown above. Sponge sections are flexible, so treat all sizes as nominal.\u003c\/small\u003e\u003c\/p\u003e \u003ch3\u003eMaterials and compliance\u003c\/h3\u003e \u003cp\u003eExpanded (sponge) EPDM with a factory-applied adhesive backing. The manufacturer describes the profile as non-marking, air and watertight, and resistant to ozone, weather, heat, steam, ketones and dilute acids and alkalis. Like all EPDM it is not suited to oils, fuels or solvents.\u003c\/p\u003e \u003cp\u003eThe manufacturer does \u003cstrong\u003enot\u003c\/strong\u003e state any food-contact (FDA, EC 1935\/2004), drinking-water (WRAS), REACH, RoHS or fire-rating approval for this profile, so we do not claim any. If your job needs a certified material, ask us before you order.\u003c\/p\u003e \u003ch3\u003eHow it fits\u003c\/h3\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-crown-strip-10mm-x-5mm-fitted-lid-seal.png?v=1795220555\" alt=\"Illustration of the 10 x 5 mm crown strip stuck to a frame and squeezed to 3.5 mm by a closed lid, with the free shape shown dashed\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:640px;height:auto\"\u003e\u003c\/p\u003e \u003col\u003e \u003cli\u003e\n\u003cstrong\u003eMeasure the closed gap.\u003c\/strong\u003e It should be smaller than 5 mm so the crowns are squeezed. About 3 to 4 mm (20 to 40% squeeze) is a good starting point; this is our guidance, not a manufacturer figure.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCheck the landing.\u003c\/strong\u003e The flat face you stick to should be at least 10 mm wide.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eClean and dry.\u003c\/strong\u003e Wipe with isopropyl alcohol and let it dry. Fit above about 10 °C for the best bond.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePeel and press.\u003c\/strong\u003e Peel the liner a short way at a time and press the base down firmly along its length. Do not stretch the strip or it will shrink back.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCorners and joins.\u003c\/strong\u003e Ease it round gentle corners; for sharp corners cut and butt the ends tightly, or mitre them. Put joins where water will not sit.\u003c\/li\u003e \u003c\/ol\u003e \u003ch3\u003eWhich size do I need?\u003c\/h3\u003e \u003ctable\u003e \u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProfile\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSize (W × H)\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSupplied as\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEPDM sponge crown strip (this item)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e10 × 5 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e100 m coil, self-adhesive\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-crown-strip-15mm-x-4mm-adhesive-backed-100m-coil\"\u003eEPDM sponge crown strip\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e15 × 4 mm\u003c\/td\u003e\n\u003ctd\u003e100 m coil, self-adhesive\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-crown-strip-14-5mm-x-7-5mm-50m-coil\"\u003eEPDM sponge crown strip\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e14.5 × 7.5 mm\u003c\/td\u003e\n\u003ctd\u003e50 m coil\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/sponge-section-half-round-10mm-x-5mm-black-per-metre\"\u003eEPDM sponge half round\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10 × 5 mm\u003c\/td\u003e\n\u003ctd\u003ePer metre\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-d-section-8mm-x-10mm-50m-coil\"\u003eEPDM sponge D section (hollow)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e8 × 10 mm\u003c\/td\u003e\n\u003ctd\u003e50 m coil, self-adhesive\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch3\u003eData sheet\u003c\/h3\u003e \u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-crown-strip-10mm-x-5mm-data-sheet.pdf?v=1795220555\" target=\"_blank\" rel=\"noopener\"\u003eDownload the technical data sheet (PDF): drawing, full specification and compliance\u003c\/a\u003e\u003c\/p\u003e \u003ch3\u003eQuestions\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eIs the price per metre or per coil?\u003c\/strong\u003e\u003cbr\u003ePer coil. One unit is a complete 100 m continuous coil, which works out at about £2.35 per metre.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat gap will it seal?\u003c\/strong\u003e\u003cbr\u003eClosed gaps below its 5 mm height; aim for about 3 to 4 mm. For gaps of 5 to 7 mm choose the 14.5 × 7.5 mm crown strip, and for 6 to 8 mm the hollow 8 × 10 mm D section, which closes with less force.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHow do I fit it?\u003c\/strong\u003e\u003cbr\u003eClean the surface with isopropyl alcohol, peel back the liner a little at a time and press the flat base down firmly. Do not stretch it as you go.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eA sharp craft knife or scissors gives a clean square end. Butt the ends tightly together; for a fully sealed join, bond the ends with a rubber-compatible instant adhesive.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCan I use it outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. The manufacturer rates its ozone, weather and UV resistance as excellent, and it absorbs no more than 5% water.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer has tested it as flexible at -40 °C and heat-aged it at +70 °C, but does not state a full working range. EPDM sponge typically works from about -40 °C to +100 °C (typical for EPDM sponge, not tested on this profile).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy the crowns and grooves rather than a flat strip?\u003c\/strong\u003e\u003cbr\u003eThe two crowns and centre rib each make a line of contact, so the strip seals with less closing force than a flat foam tape of the same size, and the grooves give the sponge room to spread as it is squeezed.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWill it mark painted surfaces?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states it is non-marking.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWill it stand up to oil or fuel?\u003c\/strong\u003e\u003cbr\u003eNo. EPDM handles water, steam, weather and dilute acids and alkalis well but swells in oils, fuels and most solvents. Ask us for a neoprene or nitrile alternative.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIs it food-safe or WRAS approved?\u003c\/strong\u003e\u003cbr\u003eNo approvals are stated for this profile, so do not use it where certified food-contact or drinking-water material is required.\u003c\/p\u003e \u003ch3\u003eDelivery and help\u003c\/h3\u003e \u003cp\u003eHeld in stock and dispatched from the UK. Trade and quantity orders welcome. Not sure it is the right profile? Call +44 1282 277786 or email sales@industrial-polymers.co.uk and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"100 m coil","offer_id":56590319518075,"sku":"IP-EPDM-10X5-STD","price":235.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-crown-strip-10mm-x-5mm-black.png?v=1795220556","url":"https:\/\/industrial-polymers.co.uk\/products\/epdm-sponge-crown-strip-10mm-x-5mm-100m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}