{"product_id":"epdm-sponge-d-section-12-5mm-x-12-5mm-per-metre","title":"EPDM Sponge D Section – 12.5mm x 12.5mm, Plain Base – 7m to 50m or 25m Coil","description":"\u003cp\u003e\u003cstrong\u003eA soft, hollow D-section seal in black EPDM sponge, 12.5 mm wide and 12.5 mm high, with a flat 12.5 mm base and a 6.2 mm round hollow core. Cut to any whole length from 7 m to 50 m, or buy the full 25 m coil.\u003c\/strong\u003e The arched crown squeezes down into the hollow as a door, lid or hatch closes, so it seals uneven gaps of roughly 7.5 to 10 mm with little closing force. It is also a recognised replacement for the classic MG and Jaguar sponge D seal (OE part BD 2159) and works as a soft bump or edge strip.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 12.5 mm wide × 12.5 mm high, with a Ø6.2 mm round hollow core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e expanded (sponge) EPDM, very soft at 40° Shore OO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing:\u003c\/strong\u003e plain flat base: bond it with a contact adhesive suited to EPDM sponge. Want peel-and-stick? See the \u003ca href=\"\/products\/epdm-sponge-d-section-self-adhesive-12-5mm-x-12-5mm-25m-coil\"\u003eself-adhesive (SAB) version of this seal\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoors:\u003c\/strong\u003e rated excellent for ozone, weather and UV; flexible at -40 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLengths:\u003c\/strong\u003e 7 m to 24 m at £24.33 per metre; the full 25 m coil at £486.75 (£19.47 per metre); 26 m to 50 m at £19.47 per metre\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStock:\u003c\/strong\u003e held in stock in the UK and dispatched from stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDoor, boot and bonnet seals on classic cars: replaces the MG and Jaguar sponge D seal, OE part BD 2159\u003c\/li\u003e\n\u003cli\u003eDoor and lid seals on electrical enclosures, control cabinets and kiosks\u003c\/li\u003e\n\u003cli\u003eHatch, access panel and inspection door seals on buses, caravans, trailers and rail vehicles\u003c\/li\u003e\n\u003cli\u003eGlazing, closure and weather strips\u003c\/li\u003e\n\u003cli\u003eSoft edging and light impact protection on panels and equipment\u003c\/li\u003e\n\u003cli\u003eGaskets and small expansion-joint fillers; thin cables can run through the hollow core\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-d-section-12-5mm-x-12-5mm-technical-drawing.png?v=1795310041\" alt=\"Technical drawing of the EPDM sponge D section: 12.5 mm wide, 12.5 mm high, 6.2 mm round hollow core, flat plain base, with approximate wall thicknesses\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProperty\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eTest method \/ basis\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eHollow D section on a flat, plain base\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (across the base)\u003c\/td\u003e\n\u003ctd\u003e12.5 mm\u003c\/td\u003e\n\u003ctd\u003eNominal; tolerance BS 3734 Class E3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height (base to crown)\u003c\/td\u003e\n\u003ctd\u003e12.5 mm\u003c\/td\u003e\n\u003ctd\u003eNominal; tolerance BS 3734 Class E3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHollow core\u003c\/td\u003e\n\u003ctd\u003eØ6.2 mm, round\u003c\/td\u003e\n\u003ctd\u003eManufacturer's product description (their drawing shows it a little smaller)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight of the straight sides\u003c\/td\u003e\n\u003ctd\u003eAbout 8.8 mm, then an arched crown\u003c\/td\u003e\n\u003ctd\u003eScaled from the manufacturer's drawing; not separately stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHollow centre above the base\u003c\/td\u003e\n\u003ctd\u003eAbout 6.2 mm\u003c\/td\u003e\n\u003ctd\u003eScaled from the manufacturer's drawing; not separately stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrown wall thickness\u003c\/td\u003e\n\u003ctd\u003eAbout 3.2 mm\u003c\/td\u003e\n\u003ctd\u003eWorked out from the stated sizes and the hole position; not separately stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSide wall thickness\u003c\/td\u003e\n\u003ctd\u003eAbout 3.15 mm\u003c\/td\u003e\n\u003ctd\u003eWorked out from 12.5 mm width and Ø6.2 mm core; not separately stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase thickness under the core\u003c\/td\u003e\n\u003ctd\u003eAbout 3.1 mm\u003c\/td\u003e\n\u003ctd\u003eWorked out as above; not separately stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixing\u003c\/td\u003e\n\u003ctd\u003ePlain base, no adhesive tape: bond with a contact adhesive suited to EPDM sponge\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing and product page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eExpanded (sponge) EPDM\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e40° Shore OO\u003c\/td\u003e\n\u003ctd\u003eShore OO durometer scale (for soft foams); test standard not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e0.5 to 0.9 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e80 g per metre: about 2.0 kg per 25 m coil\u003c\/td\u003e\n\u003ctd\u003eManufacturer figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003e5% maximum\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e50% (product page, 22 h) · 25% maximum (datasheet, 24 h recovery)\u003c\/td\u003e\n\u003ctd\u003eManufacturer figures; test temperature and standard not stated. The two sources differ, so plan on the higher figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing\u003c\/td\u003e\n\u003ctd\u003e±30% change after 7 days at 70 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; property measured not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow-temperature flexibility\u003c\/td\u003e\n\u003ctd\u003ePass at -40 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeather resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV light resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMould growth resistance\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature range\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile. About -40 °C to +100 °C (typical for EPDM sponge, not tested on this profile)\u003c\/td\u003e\n\u003ctd\u003eTested points stated: flexible at -40 °C, aged at +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength, elongation at break, tear strength\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need them\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eBS 3734 Class E3 (extruded sponge)\u003c\/td\u003e\n\u003ctd\u003eBS 3734\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied length\u003c\/td\u003e\n\u003ctd\u003e7 m to 24 m in one continuous piece; full 25 m coil; 26 m to 50 m as a 25 m coil plus the balance cut from a second coil\u003c\/td\u003e\n\u003ctd\u003eManufacturer coil length 25 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice per metre\u003c\/td\u003e\n\u003ctd\u003e£24.33\/m inc VAT for 7–24 m; £19.47\/m inc VAT for the 25 m coil (£486.75) and for 26–50 m\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eSponge sections are flexible, so treat all sizes as nominal. The manufacturer states the core as 6.2 mm; on its drawing the core looks closer to 5 mm. Either way the walls are around 3 mm thick.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eExpanded (closed-cell sponge) EPDM. The manufacturer describes the profile as air and watertight, with good UV and weather resistance, and EPDM as resistant to ozone, heat, steam, ketones and dilute acids and alkalis, with good electrical insulation. Like all EPDM it is not suited to oils, fuels or solvents.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer does \u003cstrong\u003enot\u003c\/strong\u003e state any food-contact (FDA, EC 1935\/2004), drinking-water (WRAS), REACH, RoHS or fire-rating approval for this profile, so we do not claim any. If your job needs a certified material, ask us before you order.\u003c\/p\u003e\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-d-section-12-5mm-x-12-5mm-fitted-door-seal.png?v=1795310042\" alt=\"Illustration: 12.5 x 12.5 mm EPDM sponge D seal bonded to a frame and squeezed to an 8.5 mm gap by a closed door, free shape shown dashed\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:640px;height:auto\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the closed gap.\u003c\/strong\u003e It should be smaller than 12.5 mm so the D is squeezed. About 7.5 to 10 mm (20 to 40% squeeze) is a good starting point; this is our guidance, not a manufacturer figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the landing.\u003c\/strong\u003e The face you bond to should be at least 12.5 mm wide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and dry.\u003c\/strong\u003e Degrease with isopropyl alcohol and let it dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond the base.\u003c\/strong\u003e Use a contact adhesive suited to EPDM sponge on the flat base. Lay the strip without stretching it, or it will shrink back from the ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorners and joins.\u003c\/strong\u003e Ease it round gentle corners; for sharp corners cut and butt the ends tightly, or mitre them. Put joins where water will not sit.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAdd up the edges to be sealed and allow about 5% for trimming. Example: a classic car with two doors about 1.0 m × 0.9 m needs 2 × 2 × (1.0 + 0.9) = 7.6 m; add 5% and choose 8 m. From 20 m upwards the full 25 m coil costs about the same or less than a cut length, so pick the coil.\u003c\/p\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProfile\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSize (W × H)\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSupplied as\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-d-section-10mm-x-8mm-per-metre\"\u003eEPDM sponge D section\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10 × 8 mm\u003c\/td\u003e\n\u003ctd\u003eCut length or 100 m coil, plain base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-d-section-12mm-x-10mm-75m-coil\"\u003eEPDM sponge D section\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e12 × 10 mm\u003c\/td\u003e\n\u003ctd\u003e75 m coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEPDM sponge D section (this item)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e12.5 × 12.5 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e7–50 m or 25 m coil, plain base\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-d-section-self-adhesive-12-5mm-x-12-5mm-25m-coil\"\u003eEPDM sponge D section, self-adhesive (SAB)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e12.5 × 12.5 mm\u003c\/td\u003e\n\u003ctd\u003eSame profile with an adhesive-backed base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/black-epdm-d-section-door-seal-12-5mm-x-9-5mm-per-metre\"\u003eEPDM D section door seal\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e12.5 × 9.5 mm\u003c\/td\u003e\n\u003ctd\u003ePer metre, lower profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it sold?\u003c\/strong\u003e\u003cbr\u003eChoose a length from 7 m to 24 m and it is cut as one continuous piece at £24.33 per metre. The full 25 m coil is £486.75, and 26 m to 50 m is £19.47 per metre (a full coil plus the balance). The minimum length is 7 m. For more than 50 m, add several coils or ask us.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat gap will it seal?\u003c\/strong\u003e\u003cbr\u003eAny closed gap below its 12.5 mm height. Aim for roughly 7.5 to 10 mm closed. For gaps of about 7 mm or less the 10 × 8 mm or 12 × 10 mm sponge D closes more easily.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my MG or Jaguar?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer lists it as a replacement for the MG and Jaguar sponge D seal, OE part BD 2159. Compare it with your old seal or the drawing above before you cut it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eNo. The base is plain, so bond it with a contact adhesive suited to EPDM sponge. If you want peel-and-stick, choose the \u003ca href=\"\/products\/epdm-sponge-d-section-self-adhesive-12-5mm-x-12-5mm-25m-coil\"\u003eself-adhesive (SAB) 12.5 × 12.5 mm version\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eA sharp craft knife or scissors gives a clean square end. Butt the ends tightly; for a fully sealed join, bond the ends with a rubber-compatible instant adhesive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. The manufacturer rates its ozone, weather and UV resistance as excellent, and it absorbs no more than 5% water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer has tested it as flexible at -40 °C and heat-aged it at +70 °C, but does not state a full working range. EPDM sponge typically works from about -40 °C to +100 °C (typical for EPDM sponge, not tested on this profile).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stand up to oil or fuel?\u003c\/strong\u003e\u003cbr\u003eNo. EPDM handles water, steam, weather and dilute acids and alkalis well but swells in oils, fuels and most solvents. Ask us for a neoprene or nitrile alternative.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food-safe or WRAS approved?\u003c\/strong\u003e\u003cbr\u003eNo approvals are stated for this profile, so do not use it where certified food-contact or drinking-water material is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I run a cable through the hollow?\u003c\/strong\u003e\u003cbr\u003eYes, cables up to about 5 mm can be threaded through the 6.2 mm core, and the sponge gives them some weather protection. Leave the core empty if you need the full sealing squeeze.\u003c\/p\u003e\n\u003ch3\u003eDelivery and help\u003c\/h3\u003e\n\u003cp\u003eHeld in stock and dispatched from the UK. Trade and quantity orders welcome. Not sure it is the right profile? Call +44 1282 277786 or email sales@industrial-polymers.co.uk and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"7 m","offer_id":56594045665659,"sku":"IP-EPDMD-12.5X12.5-7M","price":170.31,"currency_code":"GBP","in_stock":true},{"title":"8 m","offer_id":56594045698427,"sku":"IP-EPDMD-12.5X12.5-8M","price":194.64,"currency_code":"GBP","in_stock":true},{"title":"9 m","offer_id":56594045731195,"sku":"IP-EPDMD-12.5X12.5-9M","price":218.97,"currency_code":"GBP","in_stock":true},{"title":"10 m","offer_id":56594045763963,"sku":"IP-EPDMD-12.5X12.5-10M","price":243.3,"currency_code":"GBP","in_stock":true},{"title":"11 m","offer_id":56594045796731,"sku":"IP-EPDMD-12.5X12.5-11M","price":267.63,"currency_code":"GBP","in_stock":true},{"title":"12 m","offer_id":56594045829499,"sku":"IP-EPDMD-12.5X12.5-12M","price":291.96,"currency_code":"GBP","in_stock":true},{"title":"13 m","offer_id":56594045862267,"sku":"IP-EPDMD-12.5X12.5-13M","price":316.29,"currency_code":"GBP","in_stock":true},{"title":"14 m","offer_id":56594045895035,"sku":"IP-EPDMD-12.5X12.5-14M","price":340.62,"currency_code":"GBP","in_stock":true},{"title":"15 m","offer_id":56594045927803,"sku":"IP-EPDMD-12.5X12.5-15M","price":364.95,"currency_code":"GBP","in_stock":true},{"title":"16 m","offer_id":56594045960571,"sku":"IP-EPDMD-12.5X12.5-16M","price":389.28,"currency_code":"GBP","in_stock":true},{"title":"17 m","offer_id":56594045993339,"sku":"IP-EPDMD-12.5X12.5-17M","price":413.61,"currency_code":"GBP","in_stock":true},{"title":"18 m","offer_id":56594046026107,"sku":"IP-EPDMD-12.5X12.5-18M","price":437.94,"currency_code":"GBP","in_stock":true},{"title":"19 m","offer_id":56594046058875,"sku":"IP-EPDMD-12.5X12.5-19M","price":462.27,"currency_code":"GBP","in_stock":true},{"title":"20 m","offer_id":56594046091643,"sku":"IP-EPDMD-12.5X12.5-20M","price":486.6,"currency_code":"GBP","in_stock":true},{"title":"21 m","offer_id":56594046124411,"sku":"IP-EPDMD-12.5X12.5-21M","price":510.93,"currency_code":"GBP","in_stock":true},{"title":"22 m","offer_id":56594046157179,"sku":"IP-EPDMD-12.5X12.5-22M","price":535.26,"currency_code":"GBP","in_stock":true},{"title":"23 m","offer_id":56594046189947,"sku":"IP-EPDMD-12.5X12.5-23M","price":559.59,"currency_code":"GBP","in_stock":true},{"title":"24 m","offer_id":56594046222715,"sku":"IP-EPDMD-12.5X12.5-24M","price":583.92,"currency_code":"GBP","in_stock":true},{"title":"25 m (full coil)","offer_id":56594046255483,"sku":"IP-EPDMD-12.5X12.5-25M-COIL","price":486.75,"currency_code":"GBP","in_stock":true},{"title":"26 m","offer_id":56594046288251,"sku":"IP-EPDMD-12.5X12.5-26M","price":506.22,"currency_code":"GBP","in_stock":true},{"title":"27 m","offer_id":56594046321019,"sku":"IP-EPDMD-12.5X12.5-27M","price":525.69,"currency_code":"GBP","in_stock":true},{"title":"28 m","offer_id":56594046353787,"sku":"IP-EPDMD-12.5X12.5-28M","price":545.16,"currency_code":"GBP","in_stock":true},{"title":"29 m","offer_id":56594046386555,"sku":"IP-EPDMD-12.5X12.5-29M","price":564.63,"currency_code":"GBP","in_stock":true},{"title":"30 m","offer_id":56594046419323,"sku":"IP-EPDMD-12.5X12.5-30M","price":584.1,"currency_code":"GBP","in_stock":true},{"title":"31 m","offer_id":56594046452091,"sku":"IP-EPDMD-12.5X12.5-31M","price":603.57,"currency_code":"GBP","in_stock":true},{"title":"32 m","offer_id":56594046484859,"sku":"IP-EPDMD-12.5X12.5-32M","price":623.04,"currency_code":"GBP","in_stock":true},{"title":"33 m","offer_id":56594046517627,"sku":"IP-EPDMD-12.5X12.5-33M","price":642.51,"currency_code":"GBP","in_stock":true},{"title":"34 m","offer_id":56594046550395,"sku":"IP-EPDMD-12.5X12.5-34M","price":661.98,"currency_code":"GBP","in_stock":true},{"title":"35 m","offer_id":56594046583163,"sku":"IP-EPDMD-12.5X12.5-35M","price":681.45,"currency_code":"GBP","in_stock":true},{"title":"36 m","offer_id":56594046615931,"sku":"IP-EPDMD-12.5X12.5-36M","price":700.92,"currency_code":"GBP","in_stock":true},{"title":"37 m","offer_id":56594046648699,"sku":"IP-EPDMD-12.5X12.5-37M","price":720.39,"currency_code":"GBP","in_stock":true},{"title":"38 m","offer_id":56594046681467,"sku":"IP-EPDMD-12.5X12.5-38M","price":739.86,"currency_code":"GBP","in_stock":true},{"title":"39 m","offer_id":56594046714235,"sku":"IP-EPDMD-12.5X12.5-39M","price":759.33,"currency_code":"GBP","in_stock":true},{"title":"40 m","offer_id":56594046747003,"sku":"IP-EPDMD-12.5X12.5-40M","price":778.8,"currency_code":"GBP","in_stock":true},{"title":"41 m","offer_id":56594046779771,"sku":"IP-EPDMD-12.5X12.5-41M","price":798.27,"currency_code":"GBP","in_stock":true},{"title":"42 m","offer_id":56594046812539,"sku":"IP-EPDMD-12.5X12.5-42M","price":817.74,"currency_code":"GBP","in_stock":true},{"title":"43 m","offer_id":56594046845307,"sku":"IP-EPDMD-12.5X12.5-43M","price":837.21,"currency_code":"GBP","in_stock":true},{"title":"44 m","offer_id":56594046878075,"sku":"IP-EPDMD-12.5X12.5-44M","price":856.68,"currency_code":"GBP","in_stock":true},{"title":"45 m","offer_id":56594046910843,"sku":"IP-EPDMD-12.5X12.5-45M","price":876.15,"currency_code":"GBP","in_stock":true},{"title":"46 m","offer_id":56594046943611,"sku":"IP-EPDMD-12.5X12.5-46M","price":895.62,"currency_code":"GBP","in_stock":true},{"title":"47 m","offer_id":56594046976379,"sku":"IP-EPDMD-12.5X12.5-47M","price":915.09,"currency_code":"GBP","in_stock":true},{"title":"48 m","offer_id":56594047009147,"sku":"IP-EPDMD-12.5X12.5-48M","price":934.56,"currency_code":"GBP","in_stock":true},{"title":"49 m","offer_id":56594047041915,"sku":"IP-EPDMD-12.5X12.5-49M","price":954.03,"currency_code":"GBP","in_stock":true},{"title":"50 m","offer_id":56594047074683,"sku":"IP-EPDMD-12.5X12.5-50M","price":973.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-d-section-12-5mm-x-12-5mm-per-metre-studio.jpg?v=1795185592","url":"https:\/\/industrial-polymers.co.uk\/products\/epdm-sponge-d-section-12-5mm-x-12-5mm-per-metre","provider":"Industrial-polymers ","version":"1.0","type":"link"}