{"product_id":"epdm-sponge-d-section-12mm-x-10mm-75m-coil","title":"EPDM Sponge D Section – 12mm x 10mm Self-Adhesive – 75m Coil","description":"\u003cp\u003e\u003cstrong\u003eA soft, hollow D-section seal in black EPDM sponge, 12 mm wide and 10 mm high, with a peel-and-stick adhesive base. One continuous 75 m coil.\u003c\/strong\u003e The domed crown folds into its 8 × 6 mm hollow core when a door, lid or hatch closes on it, so it fills uneven gaps with very little closing force and doubles as a soft bump strip for light to medium knocks.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 12 mm wide × 10 mm high, with an 8 mm × 6 mm hollow core and 2 mm walls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing:\u003c\/strong\u003e factory-applied adhesive backing with a peel-off liner; no channel, clips or glue needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e expanded (sponge) EPDM, very soft at 40° Shore OO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoors:\u003c\/strong\u003e rated excellent for ozone, weather and UV; flexible at -40 °C; 5% maximum water absorption\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil:\u003c\/strong\u003e 75 m continuous length, black, about £6.09 per metre\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStock:\u003c\/strong\u003e held in stock in the UK and dispatched from stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDoor and lid seals on electrical enclosures, control cabinets, kiosks and switchgear\u003c\/li\u003e\n\u003cli\u003eHatch, locker, access panel and inspection door seals on vehicles, trailers, horseboxes, caravans and boats\u003c\/li\u003e\n\u003cli\u003eDraught and weather strips on sheds, outbuildings, light doors and glazed closures\u003c\/li\u003e\n\u003cli\u003eSoft bump and impact strip on panel edges, tailboards, shelving and equipment\u003c\/li\u003e\n\u003cli\u003eCable protection: small cables can be run through the 8 × 6 mm hollow core\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-d-section-12mm-x-10mm-technical-drawing.png\" alt=\"Technical drawing of the EPDM sponge D section: 12 mm wide, 10 mm high, 8 x 6 mm hollow core, 2 mm crown wall, adhesive-backed base\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProperty\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eTest method \/ basis\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eHollow D section on a flat base, self-adhesive\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (across the base)\u003c\/td\u003e\n\u003ctd\u003e12.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal; tolerance BS 3734 Class E3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height (base to crown)\u003c\/td\u003e\n\u003ctd\u003e10.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal; tolerance BS 3734 Class E3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHollow core (width × height)\u003c\/td\u003e\n\u003ctd\u003e8.0 mm × 6.0 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing and product description\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrown wall thickness\u003c\/td\u003e\n\u003ctd\u003e2.0 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSide wall thickness\u003c\/td\u003e\n\u003ctd\u003e2.0 mm\u003c\/td\u003e\n\u003ctd\u003eWorked out from 12 mm width and 8 mm core; not separately stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase thickness under the core\u003c\/td\u003e\n\u003ctd\u003e2.0 mm\u003c\/td\u003e\n\u003ctd\u003eWorked out from 10 mm height, 6 mm core and 2 mm crown; not separately stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum landing width\u003c\/td\u003e\n\u003ctd\u003e12 mm flat surface\u003c\/td\u003e\n\u003ctd\u003eFrom the 12 mm base width\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixing\u003c\/td\u003e\n\u003ctd\u003eFactory-applied adhesive backing with peel-off liner\u003c\/td\u003e\n\u003ctd\u003eAdhesive type and thickness not stated by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eExpanded (sponge) EPDM\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e40° Shore OO\u003c\/td\u003e\n\u003ctd\u003eShore OO durometer scale (for soft foams); test standard not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e0.5 to 0.9 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e40 g\/m (datasheet) to 75 g\/m (product page): about 3.0 to 5.6 kg per 75 m coil\u003c\/td\u003e\n\u003ctd\u003eManufacturer figures; the two sources differ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003e5% maximum\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e25% maximum (datasheet, 24 h recovery) · 50% (product page, 22 h)\u003c\/td\u003e\n\u003ctd\u003eManufacturer figures; test temperature and standard not stated. The two sources differ, so plan on the higher figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing\u003c\/td\u003e\n\u003ctd\u003e±30% change after 7 days at 70 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; property measured not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow-temperature flexibility\u003c\/td\u003e\n\u003ctd\u003ePass at -40 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeather resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV light resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMould growth resistance\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature range\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile. Typical for EPDM sponge: about -40 °C to +100 °C (typical for EPDM sponge, not tested on this profile)\u003c\/td\u003e\n\u003ctd\u003eTested points stated: flexible at -40 °C, aged at +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength, elongation at break, tear strength\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need them\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eBS 3734 Class E3 (extruded sponge)\u003c\/td\u003e\n\u003ctd\u003eBS 3734\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied length\u003c\/td\u003e\n\u003ctd\u003e75 m continuous coil\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice per metre\u003c\/td\u003e\n\u003ctd\u003eAbout £6.09\/m inc VAT (£456.63 per 75 m coil)\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eSponge sections are soft and flexible, so the manufacturer rounds sizes to the nearest whole millimetre. Treat all sizes as nominal.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eExpanded (sponge) EPDM with a factory-applied adhesive backing. The manufacturer describes the material as air and watertight, with good resistance to heat, ozone, weather, steam and polar substances, ketones and dilute acids and alkalis, and good electrical insulation. Like all EPDM it is not suited to oils, fuels or most solvents.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer does \u003cstrong\u003enot\u003c\/strong\u003e state any food-contact (FDA, EC 1935\/2004), drinking-water (WRAS), REACH, RoHS or fire-rating approval for this profile, so we do not claim any. If your job needs a certified material, ask us before you order.\u003c\/p\u003e\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-d-section-12mm-x-10mm-fitted-door-seal.png\" alt=\"Illustration of the 12 x 10 mm EPDM sponge D seal stuck to a frame and squeezed to 7 mm by a closed cabinet door, with the free shape shown dashed\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:640px;height:auto\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the closed gap.\u003c\/strong\u003e It should be smaller than 10 mm so the D is squeezed. Around 6 to 8 mm (20 to 40% squeeze) is a good starting point; this is our guidance, not a manufacturer figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the landing.\u003c\/strong\u003e The flat face you stick to should be at least 12 mm wide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and dry.\u003c\/strong\u003e Wipe with isopropyl alcohol and let it dry. Fit above about 10 °C for the best bond.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeel and press.\u003c\/strong\u003e Peel the liner a short way at a time and press the base down firmly along its length. Do not stretch the strip or it will shrink back.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorners and joins.\u003c\/strong\u003e Ease it round gentle corners; for sharp corners cut and butt the ends tightly, or mitre them. Put joins where water will not sit.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProfile\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSize (W × H)\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSupplied as\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-d-section-8mm-x-10mm-50m-coil\"\u003eEPDM sponge D section\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e8 × 10 mm\u003c\/td\u003e\n\u003ctd\u003e50 m coil, self-adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-d-section-10mm-x-8mm-per-metre\"\u003eEPDM sponge D section\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10 × 8 mm\u003c\/td\u003e\n\u003ctd\u003ePer metre or 100 m coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEPDM sponge D section (this item)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e12 × 10 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e75 m coil, self-adhesive\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-d-section-self-adhesive-12-5mm-x-12-5mm-25m-coil\"\u003eEPDM sponge D section\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e12.5 × 12.5 mm\u003c\/td\u003e\n\u003ctd\u003e25 m coil, self-adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eData sheet\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-d-section-12mm-x-10mm-data-sheet-v2.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDownload the technical data sheet (PDF): drawing, full specification and compliance\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price per metre or per coil?\u003c\/strong\u003e\u003cbr\u003ePer coil. One unit is a complete 75 m continuous coil, which works out at about £6.09 per metre.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat gap will it seal?\u003c\/strong\u003e\u003cbr\u003eAny closed gap below its 10 mm height. Aim for roughly 6 to 8 mm closed. For gaps of about 5 to 7 mm the 8 × 10 mm or 10 × 8 mm sections are easier to close; for slightly larger gaps choose the 12.5 × 12.5 mm section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I fit it?\u003c\/strong\u003e\u003cbr\u003eClean the surface with isopropyl alcohol, peel back the liner a little at a time and press the flat 12 mm base down firmly. Do not stretch it as you go.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eA sharp craft knife or scissors gives a clean square end. Butt the ends tightly together; for a fully sealed join, bond the ends with a rubber-compatible instant adhesive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. The manufacturer rates its ozone, weather and UV resistance as excellent, and it absorbs no more than 5% water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer has tested it as flexible at -40 °C and heat-aged it at +70 °C, but does not state a full working range. EPDM sponge typically works from about -40 °C to +100 °C (typical for EPDM sponge, not tested on this profile).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stand up to oil or fuel?\u003c\/strong\u003e\u003cbr\u003eNo. EPDM handles water, steam, weather and dilute acids and alkalis well but swells in oils, fuels and most solvents. Ask us for a neoprene or nitrile alternative.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food-safe or WRAS approved?\u003c\/strong\u003e\u003cbr\u003eNo approvals are stated for this profile, so do not use it where certified food-contact or drinking-water material is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I run a cable through the hollow?\u003c\/strong\u003e\u003cbr\u003eYes. Small cables can be threaded through the 8 × 6 mm core for protection against weather and knocks; leave the core empty if you need the full sealing squeeze.\u003c\/p\u003e\n\u003ch3\u003eDelivery and help\u003c\/h3\u003e\n\u003cp\u003eHeld in stock and dispatched from the UK. Trade and quantity orders welcome. Not sure it is the right profile? Call +44 1282 277786 or email sales@industrial-polymers.co.uk and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56590320501115,"sku":"IP-EPDMS-12X10-STD","price":456.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-d-section-12mm-x-10mm-75m-coil-studio.jpg?v=1795059233","url":"https:\/\/industrial-polymers.co.uk\/products\/epdm-sponge-d-section-12mm-x-10mm-75m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}