{"product_id":"epdm-sponge-d-section-8mm-x-10mm-50m-coil","title":"EPDM Sponge D Section – 8mm x 10mm – 50m Coil","description":"\u003cp\u003e\u003cstrong\u003eA soft, hollow D-section seal in black EPDM sponge, 8 mm wide and 10 mm high, with a peel-and-stick adhesive base. One continuous 50 m coil.\u003c\/strong\u003e The rounded crown folds into its 5 × 7 mm hollow core when a door, lid or hatch closes on it, so it seals uneven gaps with very little closing force and also works as a light bump strip.\u003c\/p\u003e \u003ch3\u003eAt a glance\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 8 mm wide × 10 mm high, with a 5 mm × 7 mm hollow core and 1.5 mm walls\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFixing:\u003c\/strong\u003e factory-applied adhesive backing with a peel-off liner; no channel, clips or glue needed\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e expanded (sponge) EPDM, very soft at 40° Shore OO\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eOutdoors:\u003c\/strong\u003e rated excellent for ozone, weather and UV; flexible at -40 °C\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCoil:\u003c\/strong\u003e 50 m continuous length, black, about £5.23 per metre\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eStock:\u003c\/strong\u003e held in stock in the UK and dispatched from stock\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eTypical uses\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDoor and lid seals on electrical enclosures, control cabinets and switchgear\u003c\/li\u003e \u003cli\u003eHatch, access panel and inspection door seals on vehicles, trailers, caravans and boats\u003c\/li\u003e \u003cli\u003eDraught and weather strips on light doors, windows and glazed closures\u003c\/li\u003e \u003cli\u003eSoft bump and impact strip on panel edges, shelving and equipment\u003c\/li\u003e \u003cli\u003eSmall cable protection: thin cables can be run through the hollow core\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eTechnical drawing\u003c\/h3\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-d-section-8mm-x-10mm-technical-drawing.png?v=1795129442\" alt=\"Technical drawing of the EPDM sponge D section: 8 mm wide, 10 mm high, 5 x 7 mm hollow core, 1.5 mm crown wall, adhesive-backed base\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e \u003ch3\u003eSpecifications\u003c\/h3\u003e \u003ctable\u003e \u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProperty\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eTest method \/ basis\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eHollow D section on a flat base, self-adhesive\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eOverall width (across the base)\u003c\/td\u003e\n\u003ctd\u003e8.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal; tolerance BS 3734 Class E3\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eOverall height (base to crown)\u003c\/td\u003e\n\u003ctd\u003e10.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal; tolerance BS 3734 Class E3\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHollow core (width × height)\u003c\/td\u003e\n\u003ctd\u003e5.0 mm × 7.0 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eCrown wall thickness\u003c\/td\u003e\n\u003ctd\u003e1.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eSide wall thickness\u003c\/td\u003e\n\u003ctd\u003e1.5 mm\u003c\/td\u003e\n\u003ctd\u003eWorked out from 8 mm width and 5 mm core; not separately stated\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eBase thickness under the core\u003c\/td\u003e\n\u003ctd\u003e1.5 mm\u003c\/td\u003e\n\u003ctd\u003eWorked out from 10 mm height, 7 mm core and 1.5 mm crown; not separately stated\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eFixing\u003c\/td\u003e\n\u003ctd\u003eFactory-applied adhesive backing with peel-off liner\u003c\/td\u003e\n\u003ctd\u003eAdhesive type and thickness not stated by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eExpanded (sponge) EPDM\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e40° Shore OO\u003c\/td\u003e\n\u003ctd\u003eShore OO durometer scale (for soft foams); test standard not stated\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e0.5 to 0.9 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e24 g\/m (product page) to 30 g\/m (datasheet): about 1.2 to 1.5 kg per 50 m coil\u003c\/td\u003e\n\u003ctd\u003eManufacturer figures; the two sources differ\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003e5% maximum\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e25% maximum (datasheet, 24 h recovery) · 50% (product page, 22 h)\u003c\/td\u003e\n\u003ctd\u003eManufacturer figures; test temperature and standard not stated. The two sources differ, so plan on the higher figure\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHeat ageing\u003c\/td\u003e\n\u003ctd\u003e±30% change after 7 days at 70 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; property measured not stated\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eLow-temperature flexibility\u003c\/td\u003e\n\u003ctd\u003ePass at -40 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eWeather resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eUV light resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eMould growth resistance\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eService temperature range\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile. Typical for EPDM sponge: about -40 °C to +100 °C (typical for EPDM sponge, not tested on this profile)\u003c\/td\u003e\n\u003ctd\u003eTested points stated: flexible at -40 °C, aged at +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTensile strength, elongation at break, tear strength\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need them\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eBS 3734 Class E3 (extruded sponge)\u003c\/td\u003e\n\u003ctd\u003eBS 3734\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eSupplied length\u003c\/td\u003e\n\u003ctd\u003e50 m continuous coil\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003ePrice per metre\u003c\/td\u003e\n\u003ctd\u003eAbout £5.23\/m inc VAT (£261.27 per 50 m coil)\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp\u003e\u003csmall\u003eThe manufacturer's sponge-profile catalogue lists this part as 9 mm wide; its product page, drawing and datasheet all give 8 mm. Sponge sections are flexible, so treat all sizes as nominal.\u003c\/small\u003e\u003c\/p\u003e \u003ch3\u003eMaterials and compliance\u003c\/h3\u003e \u003cp\u003eExpanded (closed-cell sponge) EPDM with a factory-applied adhesive backing. The manufacturer describes the profile as non-marking, air and watertight, and resistant to ozone, weather, UV, heat, steam, ketones and dilute acids and alkalis. Like all EPDM it is not suited to oils, fuels or solvents.\u003c\/p\u003e \u003cp\u003eThe manufacturer does \u003cstrong\u003enot\u003c\/strong\u003e state any food-contact (FDA, EC 1935\/2004), drinking-water (WRAS), REACH, RoHS or fire-rating approval for this profile, so we do not claim any. If your job needs a certified material, ask us before you order.\u003c\/p\u003e \u003ch3\u003eHow it fits\u003c\/h3\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-d-section-8mm-x-10mm-fitted-door-seal.png?v=1795129442\" alt=\"Illustration of the 8 x 10 mm EPDM sponge D seal stuck to a frame and squeezed to 7 mm by a closed cabinet door, with the free shape shown dashed\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:640px;height:auto\"\u003e\u003c\/p\u003e \u003col\u003e \u003cli\u003e\n\u003cstrong\u003eMeasure the closed gap.\u003c\/strong\u003e It should be smaller than 10 mm so the D is squeezed. Around 6 to 8 mm (20 to 40% squeeze) is a good starting point; this is our guidance, not a manufacturer figure.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCheck the landing.\u003c\/strong\u003e The flat face you stick to should be at least 8 mm wide.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eClean and dry.\u003c\/strong\u003e Wipe with isopropyl alcohol and let it dry. Fit above about 10 °C for the best bond.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePeel and press.\u003c\/strong\u003e Peel the liner a short way at a time and press the base down firmly along its length. Do not stretch the strip or it will shrink back.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCorners and joins.\u003c\/strong\u003e Ease it round gentle corners; for sharp corners cut and butt the ends tightly, or mitre them. Put joins where water will not sit.\u003c\/li\u003e \u003c\/ol\u003e \u003ch3\u003eWhich size do I need?\u003c\/h3\u003e \u003ctable\u003e \u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProfile\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSize (W × H)\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSupplied as\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/tpe-sponge-protective-d-profile-6mm-x-5-5mm-100m-coil\"\u003eTPE sponge D profile\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e6 × 5.5 mm\u003c\/td\u003e\n\u003ctd\u003e100 m coil, self-adhesive\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEPDM sponge D section (this item)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e8 × 10 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e50 m coil, self-adhesive\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-d-section-10mm-x-8mm-per-metre\"\u003eEPDM sponge D section\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10 × 8 mm\u003c\/td\u003e\n\u003ctd\u003ePer metre, not adhesive\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-d-section-12mm-x-10mm-75m-coil\"\u003eEPDM sponge D section\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e12 × 10 mm\u003c\/td\u003e\n\u003ctd\u003e75 m coil\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-d-section-self-adhesive-12-5mm-x-12-5mm-25m-coil\"\u003eEPDM sponge D section\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e12.5 × 12.5 mm\u003c\/td\u003e\n\u003ctd\u003e25 m coil, self-adhesive\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch3\u003eData sheet\u003c\/h3\u003e \u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-d-section-8mm-x-10mm-data-sheet-v2.pdf?v=1795129442\" target=\"_blank\" rel=\"noopener\"\u003eDownload the technical data sheet (PDF): drawing, full specification and compliance\u003c\/a\u003e\u003c\/p\u003e \u003ch3\u003eQuestions\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eIs the price per metre or per coil?\u003c\/strong\u003e\u003cbr\u003ePer coil. One unit is a complete 50 m continuous coil, which works out at about £5.23 per metre.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat gap will it seal?\u003c\/strong\u003e\u003cbr\u003eAny closed gap below its 10 mm height. Aim for roughly 6 to 8 mm closed. If your gap is 5 mm or less, the smaller 6 × 5.5 mm TPE sponge D will close more easily; for gaps over about 8 mm choose the 12 × 10 mm or 12.5 × 12.5 mm section.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHow do I fit it?\u003c\/strong\u003e\u003cbr\u003eClean the surface with isopropyl alcohol, peel back the liner a little at a time and press the flat base down firmly. Do not stretch it as you go.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eA sharp craft knife or scissors gives a clean square end. Butt the ends tightly together; for a fully sealed join, bond the ends with a rubber-compatible instant adhesive.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCan I use it outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. The manufacturer rates its ozone, weather and UV resistance as excellent, and it absorbs no more than 5% water.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer has tested it as flexible at -40 °C and heat-aged it at +70 °C, but does not state a full working range. EPDM sponge typically works from about -40 °C to +100 °C (typical for EPDM sponge, not tested on this profile).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWill it mark painted surfaces?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states it is non-marking.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWill it stand up to oil or fuel?\u003c\/strong\u003e\u003cbr\u003eNo. EPDM handles water, steam, weather and dilute acids and alkalis well but swells in oils, fuels and most solvents. Ask us for a neoprene or nitrile alternative.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIs it food-safe or WRAS approved?\u003c\/strong\u003e\u003cbr\u003eNo approvals are stated for this profile, so do not use it where certified food-contact or drinking-water material is required.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCan I run a cable through the hollow?\u003c\/strong\u003e\u003cbr\u003eYes, small cables up to about 4 mm can be threaded through the 5 × 7 mm core for protection; leave the core empty if you need the full sealing squeeze.\u003c\/p\u003e \u003ch3\u003eDelivery and help\u003c\/h3\u003e \u003cp\u003eHeld in stock and dispatched from the UK. Trade and quantity orders welcome. Not sure it is the right profile? Call +44 1282 277786 or email sales@industrial-polymers.co.uk and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"50 m coil","offer_id":56590323089787,"sku":"IP-EPDM-8X10-STD","price":261.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-d-section-8mm-x-10mm-black.png?v=1795129443","url":"https:\/\/industrial-polymers.co.uk\/products\/epdm-sponge-d-section-8mm-x-10mm-50m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}