{"product_id":"epdm-sponge-door-seal-10mm-x-15mm-per-metre","title":"EPDM Sponge Door Seal – 10mm x 15mm Figure-8 Double Hollow, Self-Adhesive, Black – 10m to 50m","description":"\u003cp\u003e\u003cstrong\u003eA soft, deep-compressing door seal in black EPDM sponge: 10 mm wide and 15 mm tall, with two hollow chambers stacked in a figure-8, and a self-adhesive base. Cut to one continuous length from 10 m to 50 m.\u003c\/strong\u003e Peel the liner, press it onto the door frame or aperture flange, and the round upper chamber and the wider lower chamber both squash down when the door shuts. That two-stage squeeze closes larger and less even gaps than a single bulb, which is why this section is used on classic car doors as well as enclosures, hatches and garden-room doors.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10 mm wide × 15 mm high; Ø6 mm round bore over a 7 × 5 mm lower hollow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls:\u003c\/strong\u003e 2 mm side walls, 1.5 mm dividing wall between the chambers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing:\u003c\/strong\u003e self-adhesive tape across the full 10 mm base, so no glue or clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e expanded (sponge) EPDM, very soft at 40° Shore OO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeals gaps:\u003c\/strong\u003e best on closed gaps of about 8 to 11 mm (our guidance)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClassic cars:\u003c\/strong\u003e the manufacturer makes this section as a replacement door seal for Jaguar Mk 1 saloons (original part numbers BD 10896, BD 10900, BD 17885 and BD 17886)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoors:\u003c\/strong\u003e ozone, weather and UV resistance rated excellent; flexible at -40 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e one continuous length, 10 m to 49 m at £21.34 per metre, or a full 50 m coil at £16.48 per metre (inc VAT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStock:\u003c\/strong\u003e held in stock in the UK and dispatched from stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDoor aperture seals on classic and kit cars, including the Jaguar Mk 1\u003c\/li\u003e\n\u003cli\u003eDoor seals on electrical enclosures, control cabinets, lockers and kiosks\u003c\/li\u003e\n\u003cli\u003eDraught and weather seals on shed, workshop, garden-room and loft-hatch doors\u003c\/li\u003e\n\u003cli\u003eLocker, hatch and tailgate seals on vans, trailers, horseboxes and boats\u003c\/li\u003e\n\u003cli\u003eGlazing and closure seals on panels, covers and machine guards\u003c\/li\u003e\n\u003cli\u003eSoft anti-rattle and impact strip where a gap of around 10 mm must be closed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-door-seal-10mm-x-15mm-technical-drawing.png?v=1795299314\" alt=\"Technical drawing of the EPDM sponge door seal: 10 mm wide, 15 mm high figure-8 section with a 6 mm round bore over a 7 x 5 mm hollow, 2 mm side walls, 1.5 mm dividing wall and adhesive base\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProperty\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eTest method \/ basis\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eFigure-8 double hollow: round upper chamber over a rounded-rectangle lower chamber, flat self-adhesive base\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (across the base)\u003c\/td\u003e\n\u003ctd\u003e10.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal; tolerance BS 3734 Class E3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height (base to crown)\u003c\/td\u003e\n\u003ctd\u003e15.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal; tolerance BS 3734 Class E3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper bore\u003c\/td\u003e\n\u003ctd\u003eØ6.0 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLower hollow\u003c\/td\u003e\n\u003ctd\u003e7.0 mm wide × 5.0 mm high\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSide wall (upper chamber)\u003c\/td\u003e\n\u003ctd\u003e2.0 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDividing wall between chambers\u003c\/td\u003e\n\u003ctd\u003e1.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop and base wall, waist notch\u003c\/td\u003e\n\u003ctd\u003eAbout 1.25 mm walls; shallow waist about 1 mm deep each side\u003c\/td\u003e\n\u003ctd\u003eScaled from the manufacturer's drawing; not separately stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixing\u003c\/td\u003e\n\u003ctd\u003eSelf-adhesive tape on the full 10 mm base\u003c\/td\u003e\n\u003ctd\u003eManufacturer product page and datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eExpanded (sponge) EPDM\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e40° Shore OO\u003c\/td\u003e\n\u003ctd\u003eShore OO durometer scale (for soft foams); test standard not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e0.5 to 0.9 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.05 kg per metre (0.5 kg per 10 m, 2.5 kg per 50 m coil)\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile. EPDM sponge is typically used from about -40 °C to +100 °C (typical for EPDM sponge, not tested on this profile)\u003c\/td\u003e\n\u003ctd\u003eAsk us if your job runs hot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow-temperature flexibility\u003c\/td\u003e\n\u003ctd\u003ePass at -40 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing\u003c\/td\u003e\n\u003ctd\u003e±30% change after 7 days at 70 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; property measured not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e25% maximum (24 h recovery) on the datasheet; 50% (22 h) on the product page\u003c\/td\u003e\n\u003ctd\u003eManufacturer figures differ; test temperature and standard not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003e5% maximum\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeather resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV light resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMould growth resistance\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003ctd\u003eManufacturer rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eBS 3734 Class E3 (extruded sponge)\u003c\/td\u003e\n\u003ctd\u003eBS 3734\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied as\u003c\/td\u003e\n\u003ctd\u003eOne continuous length: any whole metre from 10 m to 49 m, or a full 50 m coil\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice per metre\u003c\/td\u003e\n\u003ctd\u003e£21.34\/m inc VAT for 10 to 49 m; £16.48\/m on the 50 m coil (£824.19)\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eThe manufacturer's compression set figures differ: 50% after 22 hours on its product page and 25% maximum (24 hour recovery) on its datasheet. We show both. Sponge sections are soft and flexible, so treat all sizes as nominal.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eExpanded (closed-cell sponge) EPDM. The manufacturer describes it as air and water tight, with outstanding resistance to heat, ozone and weathering, good resistance to steam and polar substances, resistance to ketones and dilute acids and alkalis, and good electrical insulating properties. Like all EPDM it is not suited to oils, fuels or most solvents.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer does \u003cstrong\u003enot\u003c\/strong\u003e state any food-contact (FDA, EC 1935\/2004), drinking-water (WRAS), REACH, RoHS or fire-rating approval for this profile, so we do not claim any. If your job needs a certified material, ask us before you order.\u003c\/p\u003e\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-door-seal-10mm-x-15mm-fitted-door-aperture.png?v=1795299314\" alt=\"Illustration: the 10 x 15 mm figure-8 sponge seal stuck to a door frame, standing 15 mm tall with the door open and squeezed to about 9 mm when closed\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:640px;height:auto\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the closed gap.\u003c\/strong\u003e It must be under 15 mm so the seal is squeezed. About 8 to 11 mm (roughly 25 to 45% squeeze) is a good starting point; this is our guidance, not a manufacturer figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the landing.\u003c\/strong\u003e The face you stick to should be flat and at least 10 mm wide. The flat base goes on the frame and the rounded crown faces the door.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and dry.\u003c\/strong\u003e Wipe the surface with isopropyl alcohol and let it dry. Fit above about 10 °C so the adhesive grabs well.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeel and press.\u003c\/strong\u003e Peel the liner a little at a time and press the strip down firmly along its length. Do not stretch it, or it will shrink back and open gaps at the ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorners and joins.\u003c\/strong\u003e It follows gentle curves such as car door tops. For tight 90° corners, cut and butt the ends or mitre them. Butt joins tightly and make the join at the top of the door, where water will not sit; a spot of instant adhesive on the ends gives a fully sealed join.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAdd up every edge you want to seal and allow about 5% for trimming. A classic saloon front door opening is typically about 4 to 5 m round, so a four-door car needs roughly 17 to 20 m. A 600 × 800 mm enclosure door takes 2.8 m. Every length is cut as one continuous piece, so you can run several doors from one order. From 39 m upwards the full 50 m coil costs less than a cut length.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-door-seal-10mm-x-15mm-size-against-mm-rule.png?v=1795299315\" alt=\"Illustration: true-scale side and end view of the 10 x 15 mm black EPDM sponge door seal against a millimetre rule\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:640px;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhich profile do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProfile\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSize (W × H)\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-door-seal-9mm-x-7mm-white-adhesive-backed-100m-coil\"\u003eEPDM sponge door seal (white)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e9 × 7 mm\u003c\/td\u003e\n\u003ctd\u003eSmall gaps on interior doors, white wrap-over lip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-multipurpose-seal-10mm-x-7mm-100m-coil\"\u003eEPDM sponge P-section\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10 × 7 mm\u003c\/td\u003e\n\u003ctd\u003eClosed gaps of about 4 to 5.5 mm, hollow bulb with flange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-d-section-10mm-x-8mm-per-metre\"\u003eEPDM sponge D section\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10 × 8 mm\u003c\/td\u003e\n\u003ctd\u003eMedium gaps, single hollow D bulb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEPDM sponge door seal, figure-8 (this item)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e10 × 15 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eClosed gaps of about 8 to 11 mm, double hollow, uneven frames\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-sponge-door-seal-15mm-x-18mm-cut-lengths\"\u003eEPDM sponge door seal\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e15 × 18 mm\u003c\/td\u003e\n\u003ctd\u003eLarger gaps and heavier doors, wider base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat gap will it seal?\u003c\/strong\u003e\u003cbr\u003eAny closed gap under its 15 mm height. Aim for about 8 to 11 mm. For smaller gaps choose the 10 × 8 mm D section or the 10 × 7 mm P-section; for bigger gaps use the 15 × 18 mm door seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my Jaguar Mk 1?\u003c\/strong\u003e\u003cbr\u003eYes. The manufacturer makes this section as a replacement door seal for Jaguar Mk 1 saloons, matching original part numbers BD 10896, BD 10900, BD 17885 and BD 17886. Check the shape against your old seal before fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it self-adhesive?\u003c\/strong\u003e\u003cbr\u003eYes. The full 10 mm base carries adhesive tape with a peel-off liner. It sticks to clean, dry painted metal, bare metal, wood, glass, most rigid plastics and rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich way up does it go?\u003c\/strong\u003e\u003cbr\u003eThe flat base with the adhesive goes on the frame or flange. The rounded top over the 6 mm bore faces the closing door.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eScissors or a sharp craft knife gives a clean square end. Butt the ends tightly; for a fully sealed join, glue the ends together with instant adhesive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it go round corners?\u003c\/strong\u003e\u003cbr\u003eYes, it follows the gentle curves of a car door or a radiused frame. For sharp 90° corners, cut and butt or mitre the strip so it does not lift or pucker.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states it passes a -40 °C flexibility test but gives no maximum for this profile. EPDM sponge is typically used up to about +100 °C (typical for the material, not tested on this profile). The adhesive may soften before the rubber does, so ask us about hot jobs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. The manufacturer rates its ozone, weather and UV resistance as excellent and mould resistance as very good, and water absorption is 5% maximum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stand up to oil or fuel?\u003c\/strong\u003e\u003cbr\u003eNo. EPDM handles water, steam, weather and dilute acids and alkalis well, but swells in oils, fuels and most solvents.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it supplied?\u003c\/strong\u003e\u003cbr\u003eAs one continuous piece in the length you choose, from 10 m to 49 m, or as a full 50 m coil. The coil works out cheaper per metre, and from 39 m upwards it is cheaper outright.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food-safe or WRAS approved?\u003c\/strong\u003e\u003cbr\u003eNo approvals are stated for this profile, so do not use it where certified food-contact or drinking-water material is required.\u003c\/p\u003e\n\u003ch3\u003eDelivery and help\u003c\/h3\u003e\n\u003cp\u003eHeld in stock and dispatched from the UK. Trade and quantity orders welcome. Not sure it is the right profile? Call +44 1282 277786 or email sales@industrial-polymers.co.uk and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"10m","offer_id":56592901636475,"sku":"IP-EPDMS-10X15-10M","price":213.36,"currency_code":"GBP","in_stock":true},{"title":"11m","offer_id":56592901669243,"sku":"IP-EPDMS-10X15-11M","price":234.69,"currency_code":"GBP","in_stock":true},{"title":"12m","offer_id":56592901702011,"sku":"IP-EPDMS-10X15-12M","price":256.02,"currency_code":"GBP","in_stock":true},{"title":"13m","offer_id":56592901734779,"sku":"IP-EPDMS-10X15-13M","price":277.35,"currency_code":"GBP","in_stock":true},{"title":"14m","offer_id":56592901767547,"sku":"IP-EPDMS-10X15-14M","price":298.68,"currency_code":"GBP","in_stock":true},{"title":"15m","offer_id":56592901800315,"sku":"IP-EPDMS-10X15-15M","price":320.01,"currency_code":"GBP","in_stock":true},{"title":"16m","offer_id":56592901833083,"sku":"IP-EPDMS-10X15-16M","price":341.34,"currency_code":"GBP","in_stock":true},{"title":"17m","offer_id":56592901865851,"sku":"IP-EPDMS-10X15-17M","price":362.7,"currency_code":"GBP","in_stock":true},{"title":"18m","offer_id":56592901898619,"sku":"IP-EPDMS-10X15-18M","price":384.03,"currency_code":"GBP","in_stock":true},{"title":"19m","offer_id":56592901931387,"sku":"IP-EPDMS-10X15-19M","price":405.36,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":56592901964155,"sku":"IP-EPDMS-10X15-20M","price":426.69,"currency_code":"GBP","in_stock":true},{"title":"21m","offer_id":56592901996923,"sku":"IP-EPDMS-10X15-21M","price":448.02,"currency_code":"GBP","in_stock":true},{"title":"22m","offer_id":56592902029691,"sku":"IP-EPDMS-10X15-22M","price":469.35,"currency_code":"GBP","in_stock":true},{"title":"23m","offer_id":56592902062459,"sku":"IP-EPDMS-10X15-23M","price":490.68,"currency_code":"GBP","in_stock":true},{"title":"24m","offer_id":56592902095227,"sku":"IP-EPDMS-10X15-24M","price":512.04,"currency_code":"GBP","in_stock":true},{"title":"25m","offer_id":56592902127995,"sku":"IP-EPDMS-10X15-25M","price":533.37,"currency_code":"GBP","in_stock":true},{"title":"26m","offer_id":56592902160763,"sku":"IP-EPDMS-10X15-26M","price":554.7,"currency_code":"GBP","in_stock":true},{"title":"27m","offer_id":56592902193531,"sku":"IP-EPDMS-10X15-27M","price":576.03,"currency_code":"GBP","in_stock":true},{"title":"28m","offer_id":56592902226299,"sku":"IP-EPDMS-10X15-28M","price":597.36,"currency_code":"GBP","in_stock":true},{"title":"29m","offer_id":56592902259067,"sku":"IP-EPDMS-10X15-29M","price":618.69,"currency_code":"GBP","in_stock":true},{"title":"30m","offer_id":56592902291835,"sku":"IP-EPDMS-10X15-30M","price":640.05,"currency_code":"GBP","in_stock":true},{"title":"31m","offer_id":56592902324603,"sku":"IP-EPDMS-10X15-31M","price":661.38,"currency_code":"GBP","in_stock":true},{"title":"32m","offer_id":56592902357371,"sku":"IP-EPDMS-10X15-32M","price":682.71,"currency_code":"GBP","in_stock":true},{"title":"33m","offer_id":56592902390139,"sku":"IP-EPDMS-10X15-33M","price":704.04,"currency_code":"GBP","in_stock":true},{"title":"34m","offer_id":56592902422907,"sku":"IP-EPDMS-10X15-34M","price":725.37,"currency_code":"GBP","in_stock":true},{"title":"35m","offer_id":56592902455675,"sku":"IP-EPDMS-10X15-35M","price":746.7,"currency_code":"GBP","in_stock":true},{"title":"36m","offer_id":56592902488443,"sku":"IP-EPDMS-10X15-36M","price":768.03,"currency_code":"GBP","in_stock":true},{"title":"37m","offer_id":56592902521211,"sku":"IP-EPDMS-10X15-37M","price":789.39,"currency_code":"GBP","in_stock":true},{"title":"38m","offer_id":56592902553979,"sku":"IP-EPDMS-10X15-38M","price":810.72,"currency_code":"GBP","in_stock":true},{"title":"39m","offer_id":56592902586747,"sku":"IP-EPDMS-10X15-39M","price":832.05,"currency_code":"GBP","in_stock":true},{"title":"40m","offer_id":56592902619515,"sku":"IP-EPDMS-10X15-40M","price":853.38,"currency_code":"GBP","in_stock":true},{"title":"41m","offer_id":56592902652283,"sku":"IP-EPDMS-10X15-41M","price":874.71,"currency_code":"GBP","in_stock":true},{"title":"42m","offer_id":56592902685051,"sku":"IP-EPDMS-10X15-42M","price":896.04,"currency_code":"GBP","in_stock":true},{"title":"43m","offer_id":56592902717819,"sku":"IP-EPDMS-10X15-43M","price":917.37,"currency_code":"GBP","in_stock":true},{"title":"44m","offer_id":56592902750587,"sku":"IP-EPDMS-10X15-44M","price":938.73,"currency_code":"GBP","in_stock":true},{"title":"45m","offer_id":56592902783355,"sku":"IP-EPDMS-10X15-45M","price":960.06,"currency_code":"GBP","in_stock":true},{"title":"46m","offer_id":56592902816123,"sku":"IP-EPDMS-10X15-46M","price":981.39,"currency_code":"GBP","in_stock":true},{"title":"47m","offer_id":56592902848891,"sku":"IP-EPDMS-10X15-47M","price":1002.72,"currency_code":"GBP","in_stock":true},{"title":"48m","offer_id":56592902881659,"sku":"IP-EPDMS-10X15-48M","price":1024.05,"currency_code":"GBP","in_stock":true},{"title":"49m","offer_id":56592902914427,"sku":"IP-EPDMS-10X15-49M","price":1045.38,"currency_code":"GBP","in_stock":true},{"title":"50m (full coil)","offer_id":56592902947195,"sku":"IP-EPDMS-10X15-50M","price":824.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-door-seal-10mm-x-15mm-per-metre-studio.jpg?v=1795179500","url":"https:\/\/industrial-polymers.co.uk\/products\/epdm-sponge-door-seal-10mm-x-15mm-per-metre","provider":"Industrial-polymers ","version":"1.0","type":"link"}