{"product_id":"epdm-sponge-rear-door-seal-20mm-x-21mm-cut-length","title":"EPDM Sponge Rear Door Seal – 20mm x 21mm – 20m to 50m Lengths","description":"\u003cp\u003eA soft, closed-cell \u003cstrong\u003eEPDM sponge rear door seal\u003c\/strong\u003e, 20mm wide by 21mm high, with a raised sealing fin, a rounded compression lobe and a \u003cstrong\u003e2mm clip channel\u003c\/strong\u003e in the base. The channel locates on the door's seal clips, so it fits the same way as the original strip and compresses against the body opening to keep out wind, rain and road dust. Each variant is \u003cstrong\u003eone continuous length from 20m to 50m\u003c\/strong\u003e; the 50m full coil costs less than any cut length from 39m upwards.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 20mm overall width x 21mm overall height, 2mm clip channel, 8mm lower lip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e expanded (closed-cell) EPDM sponge, black, 40° Shore OO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing:\u003c\/strong\u003e clip-fitted through the 2mm channel; no adhesive needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeathering:\u003c\/strong\u003e rated excellent for ozone, weather and UV resistance; flexible at -40°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e one continuous length, 20m to 50m in 1m steps, or the full 50m coil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn stock\u003c\/strong\u003e for same-day dispatch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-rear-door-seal-20mm-x-21mm-technical-drawing.png?v=1795316144\" alt=\"Technical drawing of the EPDM sponge rear door seal cross-section, 20mm wide x 21mm high with 2mm clip channel and 8mm lower lip\" width=\"2000\" height=\"1490\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ source\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e21 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClip channel width\u003c\/td\u003e\n\u003ctd\u003e2 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLower lip (base) length\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper fin dimension\u003c\/td\u003e\n\u003ctd\u003e10 mm (as marked on the manufacturer's drawing)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eBS 3734 Class E3 (sponge sizes are approximate as the material compresses)\u003c\/td\u003e\n\u003ctd\u003eBS 3734-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eExpanded EPDM sponge (closed cell)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e40° Shore OO\u003c\/td\u003e\n\u003ctd\u003eShore OO durometer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity range\u003c\/td\u003e\n\u003ctd\u003e0.5 – 0.9 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003e5% maximum\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e25% maximum (data sheet, 24 h recovery); 50% (product page, 22 h)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data; the two published figures differ, so use the worse value for design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOven ageing, 7 days at 70°C\u003c\/td\u003e\n\u003ctd\u003e±30% change\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow-temperature flexibility\u003c\/td\u003e\n\u003ctd\u003ePass at -40°C\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer's rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeather resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer's rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV light resistance\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eManufacturer's rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMould growth resistance\u003c\/td\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003ctd\u003eManufacturer's rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper service temperature\u003c\/td\u003e\n\u003ctd\u003eApprox. +100°C continuous (typical for EPDM sponge, not tested on this profile)\u003c\/td\u003e\n\u003ctd\u003eGeneric material guidance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength, elongation, tear\u003c\/td\u003e\n\u003ctd\u003eNot published for this sponge profile\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e132 g per metre (data sheet rounds to 0.14 kg\/m)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil length\u003c\/td\u003e\n\u003ctd\u003e50 m; cut lengths 20 m to 49 m\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice per metre (cut lengths)\u003c\/td\u003e\n\u003ctd\u003e£12.50 inc VAT (£12.495 exactly), e.g. 20m = £249.90\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eExpanded EPDM is a synthetic rubber with a closed-cell structure, so it does not wick water and recovers well after compression. It resists weathering, ozone and UV, steam, and dilute acids, alkalis and ketones, but is \u003cstrong\u003enot\u003c\/strong\u003e suitable for continuous contact with petrol, mineral oils or greases. The manufacturer does not state any food-contact, potable-water or other third-party approvals for this profile, so none are claimed here.\u003c\/p\u003e\n\n\u003ch3\u003eWhere it is used\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear door seals on small vans and estate cars, including replacement strips for the classic Mini Van and Clubman estate rear doors\u003c\/li\u003e\n\u003cli\u003eClip-fitted door and hatch seals on trailers, horseboxes and kiosks\u003c\/li\u003e\n\u003cli\u003eRestoration projects where the original sponge seal has hardened or split\u003c\/li\u003e\n\u003cli\u003eEnclosure doors and access panels with seal clips or a 2mm retaining edge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eOn a twin rear-door van the seal is fitted along the outer three sides of the left-hand door and all the way round the right-hand door. Add both runs together and round up to the next metre.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorked example:\u003c\/strong\u003e doors 1.0m high x 0.6m wide. Left door: 1.0 + 0.6 + 1.0 = 2.6m. Right door: 1.0 + 0.6 + 1.0 + 0.6 = 3.2m. Total 5.8m per vehicle, so a 20m length does three vehicles with spare. If you need more than about 38m, the 50m coil is the cheaper option.\u003c\/p\u003e\n\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRemove the old seal and clips, and clean the door edge of residue and rust.\u003c\/li\u003e\n\u003cli\u003eFit the seal at room temperature; cold sponge is stiffer and harder to ease round corners.\u003c\/li\u003e\n\u003cli\u003eSlide the 2mm channel onto the clips, starting at the bottom of the hinge side, with the fin facing outwards towards the body opening.\u003c\/li\u003e\n\u003cli\u003eDo not stretch the strip as you go. Ease it round corners and push it back slightly so it is never under tension, otherwise it will shrink back and leave gaps.\u003c\/li\u003e\n\u003cli\u003eCut the end square with a sharp knife, leaving a few millimetres extra so the joint butts tightly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the seal attach to the door?\u003c\/strong\u003e\u003cbr\u003eThe 2mm channel in the base slides over the door's seal clips or a thin retaining edge, in the same way as the original strip. Clips are not included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the right size for my door?\u003c\/strong\u003e\u003cbr\u003eCompare your old seal's cross-section with the drawing above: 20mm wide, 21mm high, a pointed fin on top and a 2mm slot in the base. If you are unsure, send us a photo of the cut end next to a ruler and we will confirm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I use it for apart from van doors?\u003c\/strong\u003e\u003cbr\u003eAny clip-fitted door, hatch or panel where a soft, compressible seal of around 20mm is needed, such as trailers, kiosks and equipment enclosures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the material and how hard is it?\u003c\/strong\u003e\u003cbr\u003eClosed-cell expanded EPDM sponge at 40° Shore OO, which is soft enough to close easily but springs back to seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures will it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer confirms flexibility down to -40°C. EPDM sponge is typically used up to around +100°C, but that upper figure is generic for the material and has not been tested on this profile.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut with a sharp utility knife or scissors. For a continuous ring, butt the ends together and bond them with a cyanoacrylate rubber adhesive; on most doors a tight butt joint at the bottom corner is enough.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it sold per metre?\u003c\/strong\u003e\u003cbr\u003eEach variant is one continuous piece from 20m to 49m, or the full 50m coil. We do not join shorter pieces to make up a length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outside all year?\u003c\/strong\u003e\u003cbr\u003eYes. It is rated excellent for weather, ozone and UV resistance, and absorbs no more than 5% water.\u003c\/p\u003e\n\n\u003cp\u003eNeed help matching a profile? Call \u003ca href=\"tel:+441282277786\"\u003e+44 1282 277786\u003c\/a\u003e or email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"Industrial Polymers","offers":[{"title":"20m","offer_id":56591093039483,"sku":"IP-ESRD-20X21-20M","price":249.9,"currency_code":"GBP","in_stock":true},{"title":"21m","offer_id":56591093072251,"sku":"IP-ESRD-20X21-21M","price":262.41,"currency_code":"GBP","in_stock":true},{"title":"22m","offer_id":56591093105019,"sku":"IP-ESRD-20X21-22M","price":274.89,"currency_code":"GBP","in_stock":true},{"title":"23m","offer_id":56591093137787,"sku":"IP-ESRD-20X21-23M","price":287.4,"currency_code":"GBP","in_stock":true},{"title":"24m","offer_id":56591093170555,"sku":"IP-ESRD-20X21-24M","price":299.88,"currency_code":"GBP","in_stock":true},{"title":"25m","offer_id":56591093203323,"sku":"IP-ESRD-20X21-25M","price":312.39,"currency_code":"GBP","in_stock":true},{"title":"26m","offer_id":56591093236091,"sku":"IP-ESRD-20X21-26M","price":324.87,"currency_code":"GBP","in_stock":true},{"title":"27m","offer_id":56591093268859,"sku":"IP-ESRD-20X21-27M","price":337.38,"currency_code":"GBP","in_stock":true},{"title":"28m","offer_id":56591093301627,"sku":"IP-ESRD-20X21-28M","price":349.86,"currency_code":"GBP","in_stock":true},{"title":"29m","offer_id":56591093334395,"sku":"IP-ESRD-20X21-29M","price":362.37,"currency_code":"GBP","in_stock":true},{"title":"30m","offer_id":56591093367163,"sku":"IP-ESRD-20X21-30M","price":374.85,"currency_code":"GBP","in_stock":true},{"title":"31m","offer_id":56591093399931,"sku":"IP-ESRD-20X21-31M","price":387.36,"currency_code":"GBP","in_stock":true},{"title":"32m","offer_id":56591093432699,"sku":"IP-ESRD-20X21-32M","price":399.84,"currency_code":"GBP","in_stock":true},{"title":"33m","offer_id":56591093465467,"sku":"IP-ESRD-20X21-33M","price":412.35,"currency_code":"GBP","in_stock":true},{"title":"34m","offer_id":56591093498235,"sku":"IP-ESRD-20X21-34M","price":424.83,"currency_code":"GBP","in_stock":true},{"title":"35m","offer_id":56591093531003,"sku":"IP-ESRD-20X21-35M","price":437.34,"currency_code":"GBP","in_stock":true},{"title":"36m","offer_id":56591093563771,"sku":"IP-ESRD-20X21-36M","price":449.82,"currency_code":"GBP","in_stock":true},{"title":"37m","offer_id":56591093596539,"sku":"IP-ESRD-20X21-37M","price":462.33,"currency_code":"GBP","in_stock":true},{"title":"38m","offer_id":56591093629307,"sku":"IP-ESRD-20X21-38M","price":474.81,"currency_code":"GBP","in_stock":true},{"title":"39m","offer_id":56591093662075,"sku":"IP-ESRD-20X21-39M","price":487.32,"currency_code":"GBP","in_stock":true},{"title":"40m","offer_id":56591093694843,"sku":"IP-ESRD-20X21-40M","price":499.8,"currency_code":"GBP","in_stock":true},{"title":"41m","offer_id":56591093727611,"sku":"IP-ESRD-20X21-41M","price":512.31,"currency_code":"GBP","in_stock":true},{"title":"42m","offer_id":56591093760379,"sku":"IP-ESRD-20X21-42M","price":524.79,"currency_code":"GBP","in_stock":true},{"title":"43m","offer_id":56591093793147,"sku":"IP-ESRD-20X21-43M","price":537.3,"currency_code":"GBP","in_stock":true},{"title":"44m","offer_id":56591093825915,"sku":"IP-ESRD-20X21-44M","price":549.78,"currency_code":"GBP","in_stock":true},{"title":"45m","offer_id":56591093858683,"sku":"IP-ESRD-20X21-45M","price":562.29,"currency_code":"GBP","in_stock":true},{"title":"46m","offer_id":56591093891451,"sku":"IP-ESRD-20X21-46M","price":574.77,"currency_code":"GBP","in_stock":true},{"title":"47m","offer_id":56591093924219,"sku":"IP-ESRD-20X21-47M","price":587.28,"currency_code":"GBP","in_stock":true},{"title":"48m","offer_id":56591093956987,"sku":"IP-ESRD-20X21-48M","price":599.76,"currency_code":"GBP","in_stock":true},{"title":"49m","offer_id":56591093989755,"sku":"IP-ESRD-20X21-49M","price":612.27,"currency_code":"GBP","in_stock":true},{"title":"50m","offer_id":56591094022523,"sku":"IP-ESRD-20X21-50M-COIL","price":483.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-sponge-rear-door-seal-20mm-x-21mm-cut-length-studio.jpg?v=1795088710","url":"https:\/\/industrial-polymers.co.uk\/products\/epdm-sponge-rear-door-seal-20mm-x-21mm-cut-length","provider":"Industrial-polymers ","version":"1.0","type":"link"}