{"product_id":"epdm-square-u-channel-5mm-x-8-5mm-black-rubber-edge-trim-cut-to-length","title":"EPDM Square U Channel – 5mm x 8.5mm – Fits 1.6mm Panel – Black Rubber Edge Trim","description":"\u003cp\u003e\u003cstrong\u003eA solid black EPDM square U channel that pushes onto 1.6 mm sheet and panel edges.\u003c\/strong\u003e It is 5 mm wide and 8.5 mm high, with straight 1.7 mm walls, a 2.0 mm solid base and rounded top edges. The 1.6 mm slot is 6.5 mm deep, so it grips a good depth of the sheet and covers sharp cut metal with a neat, square-shouldered edge. EPDM resists weather and ozone well, so it works indoors and out. Choose any length from 12 m to 30 m in one continuous piece. It is in stock in the UK for same-day dispatch.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e sheet, panels and glazing 1.6 mm thick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5 mm wide × 8.5 mm high; 1.6 × 6.5 mm slot; 1.7 mm walls; 2.0 mm base over the edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e solid EPDM rubber, 65–75° Shore A, black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrength:\u003c\/strong\u003e 10 MPa tensile, 500 % elongation, 50 kN\/m tear (manufacturer data)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeathering:\u003c\/strong\u003e no cracks after the manufacturer's 72 h ozone test; compression set 21 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLengths:\u003c\/strong\u003e 12 m to 29 m in 1 m steps, or a full 30 m coil. A full coil costs less than 26 to 29 m.\u003c\/li\u003e\n\u003cli\u003ePush-on fit with no tools. It cuts cleanly with a knife and is 100 % recyclable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-square-u-channel-5mm-x-8-5mm-technical-drawing.png?v=1794995567\" alt=\"Technical drawing of the EPDM square U channel: 5 mm wide, 8.5 mm high, 1.6 mm slot 6.5 mm deep, 1.7 mm walls, 2.0 mm base\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eAll dimensions are in mm and nominal. The 2.0 mm base is the 8.5 mm height minus the 6.5 mm slot depth. The drawing is not to scale.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ basis\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eSquare U channel, straight parallel walls, rounded top edges\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e5.0 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e8.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot (channel) width\u003c\/td\u003e\n\u003ctd\u003e1.6 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot depth (grip depth)\u003c\/td\u003e\n\u003ctd\u003e6.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall thickness\u003c\/td\u003e\n\u003ctd\u003e1.7 mm each side\u003c\/td\u003e\n\u003ctd\u003eManufacturer (5.0 − 1.6 = 3.4 mm, split over two walls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase thickness over the edge\u003c\/td\u003e\n\u003ctd\u003e2.0 mm\u003c\/td\u003e\n\u003ctd\u003eCalculated: 8.5 − 6.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel thickness it fits\u003c\/td\u003e\n\u003ctd\u003e1.6 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSolid EPDM (ethylene propylene diene monomer)\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e65–75° Shore A (website), 65–75 IRHD ±5 (datasheet)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e10.0 MPa\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e500 %\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e50 kN\/m\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e21 %\u003c\/td\u003e\n\u003ctd\u003e22 h at 70 °C (manufacturer datasheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eNo cracks\u003c\/td\u003e\n\u003ctd\u003e72 h at 40 °C, 25 pphm (manufacturer datasheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: change in tensile strength\u003c\/td\u003e\n\u003ctd\u003e+9 %\u003c\/td\u003e\n\u003ctd\u003e70 h at 70 °C (manufacturer datasheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: change in elongation\u003c\/td\u003e\n\u003ctd\u003e0 %\u003c\/td\u003e\n\u003ctd\u003e70 h at 70 °C (manufacturer datasheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature range\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile. About −40 °C to +120 °C is typical for EPDM, not tested on this profile.\u003c\/td\u003e\n\u003ctd\u003eTypical for EPDM; ask us if you need a rated value\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.04 kg per metre\u003c\/td\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile; dimensions are nominal\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied as\u003c\/td\u003e\n\u003ctd\u003eOne continuous length, 12 m to 30 m\u003c\/td\u003e\n\u003ctd\u003eChoose a length above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eLengths and prices\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003cth\u003ePrice inc VAT\u003c\/th\u003e\n\u003cth\u003ePer metre\u003c\/th\u003e\n\u003cth\u003eApprox. weight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e12 m\u003c\/td\u003e\n\u003ctd\u003e£158.01\u003c\/td\u003e\n\u003ctd\u003e£13.17\u003c\/td\u003e\n\u003ctd\u003e0.48 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e13 m\u003c\/td\u003e\n\u003ctd\u003e£171.18\u003c\/td\u003e\n\u003ctd\u003e£13.17\u003c\/td\u003e\n\u003ctd\u003e0.52 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e14 m\u003c\/td\u003e\n\u003ctd\u003e£184.35\u003c\/td\u003e\n\u003ctd\u003e£13.17\u003c\/td\u003e\n\u003ctd\u003e0.56 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15 m\u003c\/td\u003e\n\u003ctd\u003e£197.52\u003c\/td\u003e\n\u003ctd\u003e£13.17\u003c\/td\u003e\n\u003ctd\u003e0.60 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e16 m\u003c\/td\u003e\n\u003ctd\u003e£210.66\u003c\/td\u003e\n\u003ctd\u003e£13.17\u003c\/td\u003e\n\u003ctd\u003e0.64 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e17 m\u003c\/td\u003e\n\u003ctd\u003e£223.83\u003c\/td\u003e\n\u003ctd\u003e£13.17\u003c\/td\u003e\n\u003ctd\u003e0.68 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e18 m\u003c\/td\u003e\n\u003ctd\u003e£237.00\u003c\/td\u003e\n\u003ctd\u003e£13.17\u003c\/td\u003e\n\u003ctd\u003e0.72 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e19 m\u003c\/td\u003e\n\u003ctd\u003e£250.17\u003c\/td\u003e\n\u003ctd\u003e£13.17\u003c\/td\u003e\n\u003ctd\u003e0.76 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20 m\u003c\/td\u003e\n\u003ctd\u003e£263.34\u003c\/td\u003e\n\u003ctd\u003e£13.17\u003c\/td\u003e\n\u003ctd\u003e0.80 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e21 m\u003c\/td\u003e\n\u003ctd\u003e£276.51\u003c\/td\u003e\n\u003ctd\u003e£13.17\u003c\/td\u003e\n\u003ctd\u003e0.84 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e22 m\u003c\/td\u003e\n\u003ctd\u003e£289.68\u003c\/td\u003e\n\u003ctd\u003e£13.17\u003c\/td\u003e\n\u003ctd\u003e0.88 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e23 m\u003c\/td\u003e\n\u003ctd\u003e£302.85\u003c\/td\u003e\n\u003ctd\u003e£13.17\u003c\/td\u003e\n\u003ctd\u003e0.92 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e24 m\u003c\/td\u003e\n\u003ctd\u003e£316.02\u003c\/td\u003e\n\u003ctd\u003e£13.17\u003c\/td\u003e\n\u003ctd\u003e0.96 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e25 m\u003c\/td\u003e\n\u003ctd\u003e£329.19\u003c\/td\u003e\n\u003ctd\u003e£13.17\u003c\/td\u003e\n\u003ctd\u003e1.00 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e26 m\u003c\/td\u003e\n\u003ctd\u003e£342.33\u003c\/td\u003e\n\u003ctd\u003e£13.17\u003c\/td\u003e\n\u003ctd\u003e1.04 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e27 m\u003c\/td\u003e\n\u003ctd\u003e£355.50\u003c\/td\u003e\n\u003ctd\u003e£13.17\u003c\/td\u003e\n\u003ctd\u003e1.08 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e28 m\u003c\/td\u003e\n\u003ctd\u003e£368.67\u003c\/td\u003e\n\u003ctd\u003e£13.17\u003c\/td\u003e\n\u003ctd\u003e1.12 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e29 m\u003c\/td\u003e\n\u003ctd\u003e£381.84\u003c\/td\u003e\n\u003ctd\u003e£13.17\u003c\/td\u003e\n\u003ctd\u003e1.16 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e30 m full coil\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e£338.40\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e£11.28\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.20 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThis profile is made from solid EPDM, a synthetic rubber known for its resistance to weather, ozone and UV. The manufacturer states that it is 100 % recyclable. The manufacturer does not state any food-contact (FDA, EC 1935\/2004), drinking-water (WRAS), fire-rating, REACH, RoHS or other product approvals for this profile, so we do not claim any. Do not use it where a certified material is required. Ask us for a certified alternative.\u003c\/p\u003e\n\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-square-u-channel-5mm-x-8-5mm-how-it-fits.png?v=1794995566\" alt=\"How the 5 x 8.5 mm EPDM U channel fits over a 1.6 mm panel edge, with four fitting steps\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:700px;height:auto\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the edge.\u003c\/strong\u003e Deburr, clean and dry it, and check the sheet is about 1.6 mm thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush on.\u003c\/strong\u003e Start at one end and press the channel down along the edge by hand. You need no tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut and join.\u003c\/strong\u003e Cut slightly over-length with a sharp knife or shears, then push the ends together into a tight butt joint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond if needed.\u003c\/strong\u003e Where there is vibration, or where you need a sealed fit (for example round an aluminium window channel), run a bead of polyurethane or silicone sealant into the slot before fitting.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEdge protection on 1.6 mm sheet metal (16 gauge), machine guards and enclosure panels\u003c\/li\u003e\n\u003cli\u003eFinishing the cut edges of doors, hatches and plastic or wooden panels\u003c\/li\u003e\n\u003cli\u003eKnock protection on vending machines, cabinets, furniture and running boards\u003c\/li\u003e\n\u003cli\u003eEdging glass or polycarbonate of the right thickness\u003c\/li\u003e\n\u003cli\u003eSafety edging on stairs and step plates where a 1.6 mm edge is exposed\u003c\/li\u003e\n\u003cli\u003eOutdoor trailers, kiosks and equipment covers, where EPDM's weather resistance helps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat thickness of panel does it fit?\u003c\/strong\u003e\u003cbr\u003eIt is made for 1.6 mm material, which is common 16-gauge sheet steel and aluminium. For slightly thinner sheet you can bond a thin rubber strip inside the slot to pack it out. For thicker material choose a channel with a wider slot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I measure what I need?\u003c\/strong\u003e\u003cbr\u003eMeasure the sheet thickness with a caliper, and the total run of edge in metres. Add about 5 % for cutting. Choose the next length up, or a full 30 m coil if you need more than 25 m, because the full coil is cheaper than 26 to 29 m.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stay on without glue?\u003c\/strong\u003e\u003cbr\u003eOn a clean 1.6 mm edge the 6.5 mm deep slot holds by grip alone for most static uses. On moving doors, vibrating machinery or outdoor parts, bond it with polyurethane or silicone sealant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. EPDM is one of the most weather-resistant rubbers. In the manufacturer's ozone test (72 h at 40 °C, 25 pphm) it showed no cracks, and heat ageing at 70 °C left its elongation unchanged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer does not give a temperature range for this profile. EPDM is typically used from about −40 °C to +120 °C, but that is a general figure for the material, not a tested rating for this part. If your application is near those limits, ask us first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut it with a sharp knife, shears or a fine-tooth saw for a square end. Butt the ends tightly together. For a sealed joint, bond the ends with a flexible adhesive or sealant. To go round a tight corner, mitre the channel or notch the base slightly so it bends without lifting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it oil resistant?\u003c\/strong\u003e\u003cbr\u003eEPDM is not recommended for contact with mineral oils, petrol or diesel. For oily areas, ask us about a nitrile or neoprene channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe or WRAS approved?\u003c\/strong\u003e\u003cbr\u003eNo approvals are stated for this profile, so it should not be used where food-contact or drinking-water certification is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it in stock?\u003c\/strong\u003e\u003cbr\u003eYes. We hold it in stock and it is supplied as one continuous length cut to the size you choose.\u003c\/p\u003e\n\n\u003ch3\u003eComplete your project\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/neoprene-square-u-channel-4-5mm-x-8-5mm-black-rubber-edge-trim\"\u003eNeoprene Square U Channel – 4.5mm x 8.5mm – fits 1.5 mm panel\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-u-channel-4-8mm-x-9-6mm-black-rubber-edge-trim-per-length\"\u003eEPDM U Channel – 4.8mm x 9.6mm – fits 1.6 mm panel\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-rubber-u-channel-5-5mm-x-8-5mm-to-fit-3mm-panel-cut-length\"\u003eEPDM Rubber U Channel – 5.5mm x 8.5mm – fits 3 mm panel\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help choosing or fitting? Call \u003ca href=\"tel:+441282277786\"\u003e+44 1282 277786\u003c\/a\u003e, email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003econtact our team\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"12m","offer_id":56582732284283,"sku":"IP-EPDMU-5X8.5-12","price":158.01,"currency_code":"GBP","in_stock":true},{"title":"13m","offer_id":56582732317051,"sku":"IP-EPDMU-5X8.5-13","price":171.18,"currency_code":"GBP","in_stock":true},{"title":"14m","offer_id":56582732349819,"sku":"IP-EPDMU-5X8.5-14","price":184.35,"currency_code":"GBP","in_stock":true},{"title":"15m","offer_id":56582732382587,"sku":"IP-EPDMU-5X8.5-15","price":197.52,"currency_code":"GBP","in_stock":true},{"title":"16m","offer_id":56582732415355,"sku":"IP-EPDMU-5X8.5-16","price":210.66,"currency_code":"GBP","in_stock":true},{"title":"17m","offer_id":56582732448123,"sku":"IP-EPDMU-5X8.5-17","price":223.83,"currency_code":"GBP","in_stock":true},{"title":"18m","offer_id":56582732480891,"sku":"IP-EPDMU-5X8.5-18","price":237.0,"currency_code":"GBP","in_stock":true},{"title":"19m","offer_id":56582732513659,"sku":"IP-EPDMU-5X8.5-19","price":250.17,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":56582732546427,"sku":"IP-EPDMU-5X8.5-20","price":263.34,"currency_code":"GBP","in_stock":true},{"title":"21m","offer_id":56582732579195,"sku":"IP-EPDMU-5X8.5-21","price":276.51,"currency_code":"GBP","in_stock":true},{"title":"22m","offer_id":56582732611963,"sku":"IP-EPDMU-5X8.5-22","price":289.68,"currency_code":"GBP","in_stock":true},{"title":"23m","offer_id":56582732644731,"sku":"IP-EPDMU-5X8.5-23","price":302.85,"currency_code":"GBP","in_stock":true},{"title":"24m","offer_id":56582732677499,"sku":"IP-EPDMU-5X8.5-24","price":316.02,"currency_code":"GBP","in_stock":true},{"title":"25m","offer_id":56582732710267,"sku":"IP-EPDMU-5X8.5-25","price":329.19,"currency_code":"GBP","in_stock":true},{"title":"26m","offer_id":56582732743035,"sku":"IP-EPDMU-5X8.5-26","price":342.33,"currency_code":"GBP","in_stock":true},{"title":"27m","offer_id":56582732775803,"sku":"IP-EPDMU-5X8.5-27","price":355.5,"currency_code":"GBP","in_stock":true},{"title":"28m","offer_id":56582732808571,"sku":"IP-EPDMU-5X8.5-28","price":368.67,"currency_code":"GBP","in_stock":true},{"title":"29m","offer_id":56582732841339,"sku":"IP-EPDMU-5X8.5-29","price":381.84,"currency_code":"GBP","in_stock":true},{"title":"30m","offer_id":56582732874107,"sku":"IP-EPDMU-5X8.5-30","price":338.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-square-u-channel-5mm-x-8-5mm-black-rubber-edge-trim-cut-studio.jpg?v=1794742905","url":"https:\/\/industrial-polymers.co.uk\/products\/epdm-square-u-channel-5mm-x-8-5mm-black-rubber-edge-trim-cut-to-length","provider":"Industrial-polymers ","version":"1.0","type":"link"}