{"product_id":"epdm-square-u-channel-9-5mm-x-19mm-cut-length","title":"EPDM Square U Channel – 9.5mm x 19mm – Fits 6.3mm Panel – Black Rubber Edge Trim","description":"\u003cp\u003e\u003cstrong\u003eA deep-grip, square-section black EPDM rubber channel for 6.3mm (¼ inch) panel, sheet and glass edges.\u003c\/strong\u003e It is 9.5mm wide and 19mm tall, so its thin 1.6mm legs reach 17.4mm down each face of the panel. That holds far more firmly than a shallow trim and covers scuffed or uneven edges. Every order is one continuous length cut to the metre, from 7m to a full 30m coil, and it ships from UK stock.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 6.3mm edges:\u003c\/strong\u003e 6.3mm wide slot, 17.4mm deep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep grip:\u003c\/strong\u003e 9.5mm wide x 19mm high, flat sides and square corners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThin, even walls:\u003c\/strong\u003e 1.6mm each side, so it adds only 3.2mm to the panel thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid EPDM, 65–75 IRHD:\u003c\/strong\u003e firm enough to grip, soft enough to cushion knocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor-proof:\u003c\/strong\u003e no cracks after the manufacturer's 72-hour ozone test\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest value at 30m:\u003c\/strong\u003e the full coil costs less than a 26m cut length\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-square-u-channel-9-5mm-x-19mm-technical-drawing.png?v=1795186078\" alt=\"Technical drawing of EPDM square U channel 9.5mm x 19mm: 6.3mm slot, 17.4mm slot depth, 1.6mm walls, approx 1.6mm base, fits 6.3mm panels\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eThe base value marked ≈ is worked out from the manufacturer's overall height and slot depth (19 − 17.4). It is not separately measured.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ source\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eSquare U channel (flat sides, square corners)\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e9.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e19.0 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot (channel) width\u003c\/td\u003e\n\u003ctd\u003e6.3 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot depth\u003c\/td\u003e\n\u003ctd\u003e17.4 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits panel \/ edge thickness\u003c\/td\u003e\n\u003ctd\u003e6.3 mm (¼ in)\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall thickness\u003c\/td\u003e\n\u003ctd\u003e1.6 mm each side\u003c\/td\u003e\n\u003ctd\u003eManufacturer data; matches (9.5 − 6.3) ÷ 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase thickness\u003c\/td\u003e\n\u003ctd\u003e≈1.6 mm\u003c\/td\u003e\n\u003ctd\u003eCalculated: 19.0 − 17.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSolid EPDM (ethylene propylene diene monomer), not sponge\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e65–75 IRHD (±5), listed as 65–75° Shore A\u003c\/td\u003e\n\u003ctd\u003eIRHD, manufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e10 MPa\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e500%\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e50 kN\/m\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e21%\u003c\/td\u003e\n\u003ctd\u003e22 h at 70 °C, manufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eNo cracks\u003c\/td\u003e\n\u003ctd\u003e72 h at 40 °C, 25 pphm, manufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: change in tensile strength\u003c\/td\u003e\n\u003ctd\u003e+9%\u003c\/td\u003e\n\u003ctd\u003e70 h at 70 °C, manufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: change in elongation\u003c\/td\u003e\n\u003ctd\u003e0%\u003c\/td\u003e\n\u003ctd\u003e70 h at 70 °C, manufacturer datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.11 kg per metre (a 30m coil weighs about 3.3kg)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLengths available\u003c\/td\u003e\n\u003ctd\u003e7m to 29m in 1m steps, plus a 30m full coil; each one continuous piece\u003c\/td\u003e\n\u003ctd\u003eOur stock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003eAbout −40 °C to +100 °C (typical for EPDM, not tested on this profile)\u003c\/td\u003e\n\u003ctd\u003eGeneral EPDM data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer for this profile\u003c\/td\u003e\n\u003ctd\u003eNot available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThis channel is made from a solid black EPDM compound. EPDM is known for resisting weather, UV, ozone, water and steam, and it stays flexible in cold weather. It is \u003cstrong\u003enot\u003c\/strong\u003e suited to petrol, mineral oils or hydrocarbon solvents. If it will be splashed with oil, ask us about a nitrile or neoprene alternative.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer works under an ISO 9001:2015 registered quality system. It does \u003cstrong\u003enot\u003c\/strong\u003e state FDA, EC 1935\/2004, WRAS, UL 94, REACH or RoHS compliance for this product, so we make no such claims. If you need a declaration for your project, contact us before you order.\u003c\/p\u003e\n\n\u003ch3\u003eFitted on a 6.3mm edge\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-square-u-channel-9-5mm-x-19mm-fitted-on-6-3mm-panel.png?v=1795186079\" alt=\"Illustration of the 9.5mm x 19mm EPDM square U channel pushed onto a 6.3mm panel edge, drawn to true proportions\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEdge protector for 6mm and ¼ inch steel, aluminium and plastic guard or enclosure panels\u003c\/li\u003e\n\u003cli\u003eEdge trim for 6mm toughened glass, polycarbonate and acrylic screens, shelves and partitions\u003c\/li\u003e\n\u003cli\u003eRough or uneven edges where a shallow trim would not cover the damage\u003c\/li\u003e\n\u003cli\u003eEdges of doors, hatches, cabinet fronts, display units and vending machines\u003c\/li\u003e\n\u003cli\u003eStair nosings, running boards and plywood or MDF panel edges\u003c\/li\u003e\n\u003cli\u003eA finishing seal around aluminium window channels when bonded in place\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePrice per metre\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003cth\u003ePrice inc VAT\u003c\/th\u003e\n\u003cth\u003ePer metre\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e7m to 29m cut lengths\u003c\/td\u003e\n\u003ctd\u003e£196.47 (7m) to £813.93 (29m)\u003c\/td\u003e\n\u003ctd\u003e£28.07\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e30m full coil\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e£729.00\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e£24.30\/m\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe 30m coil costs less than any cut length from 26m up. If you need 26m or more, the full coil is the cheaper choice. For runs shorter than 7m, see our \u003ca href=\"\/products\/u-channel-6-3mm-x-17-4mm-black-epdm-edge-trim-per-metre\"\u003e6.3mm x 17.4mm U channel sold per metre\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAdd up every edge you want to cover and allow about 5% for trimming. Example: four guard panels 1.0m x 0.8m, edged all round, need 4 x 3.6m = 14.4m. Add 5% to get 15.1m, so order 16m. Each length is one unbroken piece, so you can run it round corners and cut it on site.\u003c\/p\u003e\n\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eCheck the edge is 6.3mm thick. A 5mm edge will be loose unless you bond a thin strip inside the slot.\u003c\/li\u003e\n\u003cli\u003eWipe the edge free of dust, oil and swarf.\u003c\/li\u003e\n\u003cli\u003eStart on a straight run. Press the channel on by hand and seat it down the full 17.4mm with a rubber mallet.\u003c\/li\u003e\n\u003cli\u003eOn outside corners, cut a small V-notch out of the legs so the profile bends without kinking.\u003c\/li\u003e\n\u003cli\u003eFor a permanent or watertight fit, run a thin bead of polyurethane or silicone sealant into the slot first.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSimilar sizes for 6mm edges\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eChoose it when\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEPDM square U 9.5mm x 19mm (this item)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYou want the deepest grip, on 7m to 30m lengths\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-square-u-channel-9-2mm-x-15mm-for-6mm-panels-50m-coil\"\u003eEPDM square U channel 9.2mm x 15mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eA slightly shallower slot is enough, on a 50m coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-square-u-channel-9mm-x-8mm-for-6mm-panels-cut-length\"\u003eEPDM square U channel 9mm x 8mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eYou want the lowest, neatest profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/u-channel-6-3mm-x-11mm-neoprene-black-per-metre\"\u003eNeoprene U channel 6.3mm x 11mm inside\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eYou need some oil resistance, sold by the metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/rubber-square-u-channel-6mm-panel-x-16mm-high-x-3-1mm-wall-per-metre\"\u003eSquare U channel, 6mm panel x 16mm, 3.1mm wall\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eYou need heavy walls for real impact protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit a 5mm or 8mm panel?\u003c\/strong\u003e\u003cbr\u003eNo, not on its own. The slot is 6.3mm. On a 5mm edge it will be loose unless you bond a 1mm strip inside it. On anything thicker than about 6.5mm it will not go on properly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a 19mm-tall channel?\u003c\/strong\u003e\u003cbr\u003eThe legs cover 17.4mm of each face, against about 6mm for a low-profile trim. That gives a much stronger friction grip and hides chipped or uneven edges. Choose it where the trim must stay on through knocks and vibration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I fit it?\u003c\/strong\u003e\u003cbr\u003ePush it on by hand and seat it with a rubber mallet. It grips by friction. Add polyurethane or silicone sealant in the slot where it must resist vibration or keep water out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. EPDM resists weather, UV and ozone, and the manufacturer's 72-hour ozone test showed no cracking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures will it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer does not give a range for this profile. EPDM typically works from about −40 °C to +100 °C, and heat-aged samples (70 h at 70 °C) kept their elongation unchanged. Ask us if your application runs hotter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut or join it?\u003c\/strong\u003e\u003cbr\u003eCut it with a sharp knife or fine-toothed snips against a straight edge. Butt-join ends with a cyanoacrylate rubber adhesive. On corners, notch the legs rather than cutting right through, so the run stays continuous.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it solid rubber or sponge?\u003c\/strong\u003e\u003cbr\u003eSolid EPDM throughout, rated 65–75 IRHD. That is firm enough to stay put and soft enough to absorb knocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat applications does it suit?\u003c\/strong\u003e\u003cbr\u003eSheet metal, guard and enclosure edges, 6mm glass and plastic panels, doors, stairs, furniture and vending machines. It is not for oily environments. Choose nitrile or neoprene there.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it arrive as one piece?\u003c\/strong\u003e\u003cbr\u003eYes. Every length from 7m to 30m is supplied as one continuous, unjoined piece, loosely coiled.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe or WRAS approved?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer does not state any food-contact or water approval for this product, so we cannot claim one.\u003c\/p\u003e\n\n\u003cp\u003eNeed help choosing? \u003ca href=\"\/pages\/contact\"\u003eContact our technical team\u003c\/a\u003e on +44 1282 277786 or sales@industrial-polymers.co.uk with your panel thickness and application.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"7m","offer_id":56588442304891,"sku":"IP-EPDMU-9.5X19-7","price":196.47,"currency_code":"GBP","in_stock":true},{"title":"8m","offer_id":56588442337659,"sku":"IP-EPDMU-9.5X19-8","price":224.52,"currency_code":"GBP","in_stock":true},{"title":"9m","offer_id":56588442370427,"sku":"IP-EPDMU-9.5X19-9","price":252.6,"currency_code":"GBP","in_stock":true},{"title":"10m","offer_id":56588442403195,"sku":"IP-EPDMU-9.5X19-10","price":280.68,"currency_code":"GBP","in_stock":true},{"title":"11m","offer_id":56588442435963,"sku":"IP-EPDMU-9.5X19-11","price":308.73,"currency_code":"GBP","in_stock":true},{"title":"12m","offer_id":56588442468731,"sku":"IP-EPDMU-9.5X19-12","price":336.81,"currency_code":"GBP","in_stock":true},{"title":"13m","offer_id":56588442501499,"sku":"IP-EPDMU-9.5X19-13","price":364.86,"currency_code":"GBP","in_stock":true},{"title":"14m","offer_id":56588442534267,"sku":"IP-EPDMU-9.5X19-14","price":392.94,"currency_code":"GBP","in_stock":true},{"title":"15m","offer_id":56588442567035,"sku":"IP-EPDMU-9.5X19-15","price":420.99,"currency_code":"GBP","in_stock":true},{"title":"16m","offer_id":56588442599803,"sku":"IP-EPDMU-9.5X19-16","price":449.07,"currency_code":"GBP","in_stock":true},{"title":"17m","offer_id":56588442632571,"sku":"IP-EPDMU-9.5X19-17","price":477.12,"currency_code":"GBP","in_stock":true},{"title":"18m","offer_id":56588442665339,"sku":"IP-EPDMU-9.5X19-18","price":505.2,"currency_code":"GBP","in_stock":true},{"title":"19m","offer_id":56588442698107,"sku":"IP-EPDMU-9.5X19-19","price":533.25,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":56588442730875,"sku":"IP-EPDMU-9.5X19-20","price":561.33,"currency_code":"GBP","in_stock":true},{"title":"21m","offer_id":56588442763643,"sku":"IP-EPDMU-9.5X19-21","price":589.41,"currency_code":"GBP","in_stock":true},{"title":"22m","offer_id":56588442796411,"sku":"IP-EPDMU-9.5X19-22","price":617.46,"currency_code":"GBP","in_stock":true},{"title":"23m","offer_id":56588442829179,"sku":"IP-EPDMU-9.5X19-23","price":645.54,"currency_code":"GBP","in_stock":true},{"title":"24m","offer_id":56588442861947,"sku":"IP-EPDMU-9.5X19-24","price":673.59,"currency_code":"GBP","in_stock":true},{"title":"25m","offer_id":56588442894715,"sku":"IP-EPDMU-9.5X19-25","price":701.67,"currency_code":"GBP","in_stock":true},{"title":"26m","offer_id":56588442927483,"sku":"IP-EPDMU-9.5X19-26","price":729.72,"currency_code":"GBP","in_stock":true},{"title":"27m","offer_id":56588442960251,"sku":"IP-EPDMU-9.5X19-27","price":757.8,"currency_code":"GBP","in_stock":true},{"title":"28m","offer_id":56588442993019,"sku":"IP-EPDMU-9.5X19-28","price":785.85,"currency_code":"GBP","in_stock":true},{"title":"29m","offer_id":56588443025787,"sku":"IP-EPDMU-9.5X19-29","price":813.93,"currency_code":"GBP","in_stock":true},{"title":"30m","offer_id":56588443058555,"sku":"IP-EPDMU-9.5X19-30","price":729.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-square-u-channel-9-5mm-x-19mm-black-end-view.png?v=1795186079","url":"https:\/\/industrial-polymers.co.uk\/products\/epdm-square-u-channel-9-5mm-x-19mm-cut-length","provider":"Industrial-polymers ","version":"1.0","type":"link"}