{"product_id":"epdm-u-channel-7mm-x-21mm-for-2mm-panels-cut-lengths","title":"EPDM U Channel – 7mm x 21mm for 2mm Panels – 6m to 30m Lengths","description":"\u003cp\u003e\u003cstrong\u003eA tall, deep-gripping edge trim for 2 mm panels.\u003c\/strong\u003e This solid black EPDM U channel is 7 mm wide and 21 mm high, with a 2 mm slot that runs 18.5 mm deep and a fully rounded base. The long legs cover a wide band on both faces of the sheet, so it hides rough or uneven cut edges and gives a broad cushioned strip against knocks. Choose one continuous length from 6 m to a full 30 m coil, in 1 m steps. Every length is held in stock in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2 mm panels:\u003c\/strong\u003e the 2 mm slot grips both faces of 2 mm sheet metal, glass, acrylic, polycarbonate or board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep 7 × 21 mm profile:\u003c\/strong\u003e 18.5 mm deep legs with 2.5 mm walls and a 2.5 mm rounded base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid EPDM, 65–75 Shore A:\u003c\/strong\u003e tensile strength 10 MPa, elongation at break 500%, tear strength 50 kN\/m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for outdoor use:\u003c\/strong\u003e no cracks after the 72 h ozone test, with good resistance to weathering, heat, cold, flexing and abrasion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo special tools:\u003c\/strong\u003e push on by hand and cut with a sharp knife. Bond with PU or silicone sealant for a permanent or sealed fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAny length from 6 m to 30 m:\u003c\/strong\u003e one continuous piece. The 30 m full coil has the lowest price per metre.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-u-channel-7mm-x-21mm-technical-drawing.png?v=1795078285\" alt=\"Technical drawing of the EPDM U channel 7 x 21 mm: cross-section dimensioned 7 mm wide, 21 mm high, 2 mm slot 18.5 mm deep, 2.5 mm walls and base, round base\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eNominal dimensions in mm. Overall width, height, slot width and the 18.5 mm inside depth are the manufacturer's figures. The 2.5 mm wall is (7 − 2) ÷ 2 and the 2.5 mm base is 21 − 18.5; both agree with the 2.5 mm thickness on the manufacturer's data.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ source\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eRound-base U channel (edge trim)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e21 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot (channel) width\u003c\/td\u003e\n\u003ctd\u003e2 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInside (slot) depth\u003c\/td\u003e\n\u003ctd\u003e18.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits panel thickness\u003c\/td\u003e\n\u003ctd\u003e2 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall thickness\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data; (7 − 2) ÷ 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase thickness\u003c\/td\u003e\n\u003ctd\u003e2.5 mm (calculated)\u003c\/td\u003e\n\u003ctd\u003e21 − 18.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSolid EPDM (ethylene propylene diene monomer)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e65–75 IRHD (±5), about 65–75 Shore A\u003c\/td\u003e\n\u003ctd\u003eIRHD, manufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e10 MPa\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e500%\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e50 kN\/m\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e21%\u003c\/td\u003e\n\u003ctd\u003e22 h at 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eNo cracks\u003c\/td\u003e\n\u003ctd\u003e72 h at 40 °C, 25 pphm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: change in tensile strength\u003c\/td\u003e\n\u003ctd\u003e+9%\u003c\/td\u003e\n\u003ctd\u003e70 h at 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: change in elongation at break\u003c\/td\u003e\n\u003ctd\u003e0%\u003c\/td\u003e\n\u003ctd\u003e70 h at 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.13 kg per metre (30 m coil about 3.9 kg)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLengths available\u003c\/td\u003e\n\u003ctd\u003e6, 7, 8 … 29 m, or a full 30 m coil (one continuous piece)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003eabout −40 °C to +120 °C, \u003cem\u003etypical for EPDM, not tested on this profile\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003eGeneral EPDM data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eNot stated; extruded rubber is normally made to ISO 3302-1 tolerance classes\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThis profile is extruded from a solid EPDM compound. EPDM resists weathering, ozone, UV and water, and stays flexible over time. The test results in the table come from the manufacturer's data sheet for this profile.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer does not state any food-contact, WRAS, REACH, RoHS or fire approval for this product, so we do not claim one. If your application needs a certified material, please contact us before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-u-channel-7mm-x-21mm-how-it-fits.png?v=1795078285\" alt=\"How it fits: section of the 7 x 21 mm EPDM U channel pushed onto a 2 mm panel edge, with four fitting steps\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:640px;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eChoosing your length\u003c\/h3\u003e\n\u003cp\u003eAdd up the total length of edge to be covered and allow about 5% extra for cutting and joints. For example, two 2 mm guard panels of 1,000 × 800 mm edged all round need 2 × 3.6 m = 7.2 m, or about 7.6 m with allowance, so choose 8 m. The price covers one continuous piece of the length you choose.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003cth\u003ePrice inc VAT\u003c\/th\u003e\n\u003cth\u003ePrice per metre\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6 m\u003c\/td\u003e\n\u003ctd\u003e£181.77\u003c\/td\u003e\n\u003ctd\u003e£30.30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10 m\u003c\/td\u003e\n\u003ctd\u003e£302.94\u003c\/td\u003e\n\u003ctd\u003e£30.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15 m\u003c\/td\u003e\n\u003ctd\u003e£454.41\u003c\/td\u003e\n\u003ctd\u003e£30.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20 m\u003c\/td\u003e\n\u003ctd\u003e£605.88\u003c\/td\u003e\n\u003ctd\u003e£30.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e25 m\u003c\/td\u003e\n\u003ctd\u003e£757.35\u003c\/td\u003e\n\u003ctd\u003e£30.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e30 m full coil\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e£784.80\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e£26.16\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eNeed 26 m or more? The full 30 m coil costs less than the 26 m, 27 m, 28 m or 29 m lengths.\u003c\/p\u003e\n\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSheet metal machine guards, covers and enclosure doors where a wide protective band is wanted\u003c\/li\u003e\n\u003cli\u003eProtective edge on 2 mm glass, acrylic and polycarbonate panels and screens\u003c\/li\u003e\n\u003cli\u003eHiding rough, burred or uneven cut edges on 2 mm sheet and board\u003c\/li\u003e\n\u003cli\u003eVending machines, kiosks, shop fittings and furniture panels\u003c\/li\u003e\n\u003cli\u003eStairs, steps, kick plates and running boards made from 2 mm sheet\u003c\/li\u003e\n\u003cli\u003eBonded into aluminium channels as a push-in glazing or panel seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eDeburr and clean the edge. Check the sheet is 2 mm thick.\u003c\/li\u003e\n\u003cli\u003eStart at a corner and press the channel on by hand, working along the edge. A soft-faced mallet helps on long runs.\u003c\/li\u003e\n\u003cli\u003eOn outside corners, ease the trim round the bend. On tight corners, cut a small V-notch out of the legs.\u003c\/li\u003e\n\u003cli\u003eCut a few millimetres long with a sharp knife, then push the ends together into a tight butt joint.\u003c\/li\u003e\n\u003cli\u003eFor a sealed or permanent fit, run a bead of PU or silicone sealant into the slot first.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat panel thickness does it fit?\u003c\/strong\u003e\u003cbr\u003e2 mm panels. On 1.5 mm sheet the grip will be loose: bond it with sealant, or choose the 5.5 × 19.7 mm or 5.6 × 19 mm channel for 1.6 mm sheet. For 4.8 mm panels choose the 12.8 × 21.5 mm channel. A 3 mm edge will not fit this slot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose the 21 mm height?\u003c\/strong\u003e\u003cbr\u003eThe 18.5 mm deep legs cover far more of each face than a standard 9–10 mm trim. That hides rough cuts, holds on more firmly and gives a wider cushioned strip against knocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I measure what I need?\u003c\/strong\u003e\u003cbr\u003eMeasure the panel thickness with a caliper first, then measure the total edge length in metres and round up. Allow about 5% extra for cuts and joints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. EPDM is chosen for outdoor use because it resists weathering and ozone. This compound passed a 72 h ozone test with no cracks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer has not published a temperature range for this profile. EPDM is typically used from about −40 °C to +120 °C, but this has not been tested on this profile. The compound did pass heat ageing for 70 h at 70 °C with little change in properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eUse a sharp knife or heavy shears and cut square. Butt the ends together tightly. For a sealed joint, add a little cyanoacrylate glue or sealant to the cut faces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it go round corners?\u003c\/strong\u003e\u003cbr\u003eIt follows gentle curves easily. For sharp outside corners, notch the legs from the inside so the base bends neatly, or cut and butt-join the ends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it soft or firm?\u003c\/strong\u003e\u003cbr\u003eAt 65–75 Shore A it is medium-firm: soft enough to absorb knocks, and firm enough to hold its shape and grip the panel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is the 30 m coil cheaper than 26 m to 29 m?\u003c\/strong\u003e\u003cbr\u003e30 m is a full, uncut coil, so there is no cutting or handling, and it is priced lower per metre.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food-safe or certified?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states no food-contact or other approvals for this product, so we do not claim any. Ask us about certified alternatives.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it in stock?\u003c\/strong\u003e\u003cbr\u003eYes. All lengths are held in stock and dispatched from the UK.\u003c\/p\u003e\n\n\u003ch3\u003eRelated profiles\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-rubber-u-channel-5-5mm-x-19-7mm-1-6mm-panel-fit-cut-length\"\u003eEPDM U Channel 5.5 × 19.7 mm, for 1.6 mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-rubber-u-channel-5-6mm-x-19mm-8m-to-30m-coils\"\u003eEPDM U Channel 5.6 × 19 mm, for 1.6 mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/solid-epdm-u-channel-edge-protection-5-7mm-x-17mm-per-metre\"\u003eEPDM U Channel 5.7 × 17 mm, for 1.5–2.5 mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-rubber-u-channel-8-4mm-x-21mm-50m-coil\"\u003eEPDM U Channel 8.4 × 21 mm, 50 m coil\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-rubber-u-channel-12-8mm-x-21-5mm-4-8mm-panel-fit\"\u003eEPDM U Channel 12.8 × 21.5 mm, for 4.8 mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-square-u-channel-14-7mm-x-22mm-cut-lengths\"\u003eEPDM Square U Channel 14.7 × 22 mm\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help choosing? Call \u003ca href=\"tel:+441282277786\"\u003e+44 1282 277786\u003c\/a\u003e or email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"Industrial Polymers","offers":[{"title":"6m","offer_id":56588321816955,"sku":"IP-EPDMU-7X21-6M","price":181.77,"currency_code":"GBP","in_stock":true},{"title":"7m","offer_id":56588321849723,"sku":"IP-EPDMU-7X21-7M","price":212.07,"currency_code":"GBP","in_stock":true},{"title":"8m","offer_id":56588321882491,"sku":"IP-EPDMU-7X21-8M","price":242.34,"currency_code":"GBP","in_stock":true},{"title":"9m","offer_id":56588321915259,"sku":"IP-EPDMU-7X21-9M","price":272.64,"currency_code":"GBP","in_stock":true},{"title":"10m","offer_id":56588321948027,"sku":"IP-EPDMU-7X21-10M","price":302.94,"currency_code":"GBP","in_stock":true},{"title":"11m","offer_id":56588321980795,"sku":"IP-EPDMU-7X21-11M","price":333.24,"currency_code":"GBP","in_stock":true},{"title":"12m","offer_id":56588322013563,"sku":"IP-EPDMU-7X21-12M","price":363.54,"currency_code":"GBP","in_stock":true},{"title":"13m","offer_id":56588322046331,"sku":"IP-EPDMU-7X21-13M","price":393.81,"currency_code":"GBP","in_stock":true},{"title":"14m","offer_id":56588322079099,"sku":"IP-EPDMU-7X21-14M","price":424.11,"currency_code":"GBP","in_stock":true},{"title":"15m","offer_id":56588322111867,"sku":"IP-EPDMU-7X21-15M","price":454.41,"currency_code":"GBP","in_stock":true},{"title":"16m","offer_id":56588322144635,"sku":"IP-EPDMU-7X21-16M","price":484.71,"currency_code":"GBP","in_stock":true},{"title":"17m","offer_id":56588322177403,"sku":"IP-EPDMU-7X21-17M","price":515.01,"currency_code":"GBP","in_stock":true},{"title":"18m","offer_id":56588322210171,"sku":"IP-EPDMU-7X21-18M","price":545.28,"currency_code":"GBP","in_stock":true},{"title":"19m","offer_id":56588322242939,"sku":"IP-EPDMU-7X21-19M","price":575.58,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":56588322275707,"sku":"IP-EPDMU-7X21-20M","price":605.88,"currency_code":"GBP","in_stock":true},{"title":"21m","offer_id":56588322308475,"sku":"IP-EPDMU-7X21-21M","price":636.18,"currency_code":"GBP","in_stock":true},{"title":"22m","offer_id":56588322341243,"sku":"IP-EPDMU-7X21-22M","price":666.48,"currency_code":"GBP","in_stock":true},{"title":"23m","offer_id":56588322374011,"sku":"IP-EPDMU-7X21-23M","price":696.75,"currency_code":"GBP","in_stock":true},{"title":"24m","offer_id":56588322406779,"sku":"IP-EPDMU-7X21-24M","price":727.05,"currency_code":"GBP","in_stock":true},{"title":"25m","offer_id":56588322439547,"sku":"IP-EPDMU-7X21-25M","price":757.35,"currency_code":"GBP","in_stock":true},{"title":"26m","offer_id":56588322472315,"sku":"IP-EPDMU-7X21-26M","price":787.65,"currency_code":"GBP","in_stock":true},{"title":"27m","offer_id":56588322505083,"sku":"IP-EPDMU-7X21-27M","price":817.95,"currency_code":"GBP","in_stock":true},{"title":"28m","offer_id":56588322537851,"sku":"IP-EPDMU-7X21-28M","price":848.22,"currency_code":"GBP","in_stock":true},{"title":"29m","offer_id":56588322570619,"sku":"IP-EPDMU-7X21-29M","price":878.52,"currency_code":"GBP","in_stock":true},{"title":"30m","offer_id":56588322603387,"sku":"IP-EPDMU-7X21-30M-COIL","price":784.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-u-channel-7mm-x-21mm-studio-34d84e4f-cc7d-4614-a40c-aa6cdd43d1af.jpg?v=1794941845","url":"https:\/\/industrial-polymers.co.uk\/products\/epdm-u-channel-7mm-x-21mm-for-2mm-panels-cut-lengths","provider":"Industrial-polymers ","version":"1.0","type":"link"}