{"product_id":"epdm-u-channel-7mm-x-9-7mm-2mm-panel-cut-length","title":"EPDM U Channel – 7mm x 9.7mm – Fits 2mm Panel – Black Rubber Edge Trim","description":"\u003cp\u003e\u003cstrong\u003eA heavy-section push-on edge trim for 2 mm sheet.\u003c\/strong\u003e This solid black EPDM U channel is 7 mm wide and 9.75 mm high (sold as 7 × 9.7 mm). It has a parallel 2 mm slot 6.75 mm deep, 2.5 mm side walls and a thick 3 mm rounded base, so it covers a cut edge with a full, cushioned bumper that soaks up knocks. The lips are rounded and the back is a smooth round curve. Choose one continuous length from 12 m to 29 m, or a full 30 m coil; every length is held in stock in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 2 mm panels:\u003c\/strong\u003e parallel 2 mm slot, 6.75 mm deep, grips both faces of the sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7 × 9.75 mm round-back profile:\u003c\/strong\u003e 2.5 mm side walls and a 3 mm solid base over the cut edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid EPDM, 65–75 Shore A:\u003c\/strong\u003e tensile strength 10 MPa, elongation at break 500%, tear strength 50 kN\/m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for outdoor use:\u003c\/strong\u003e no cracks after the 72 h ozone test, and little change after heat ageing at 70 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo tools needed:\u003c\/strong\u003e push on by hand and cut with a sharp knife. Bond with PU or silicone sealant for a permanent or sealed fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAny length from 12 m to 30 m:\u003c\/strong\u003e one continuous piece. The 30 m full coil has the lowest price per metre.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-u-channel-7mm-x-9-7mm-technical-drawing.png?v=1795078169\" alt=\"Technical drawing of the EPDM U channel 7 x 9.7 mm: cross-section 7 mm wide, 9.75 mm high, 2 mm slot 6.75 mm deep, 2.5 mm side walls, 3 mm base, fits 2 mm panels\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eNominal dimensions in mm, free (unfitted) state, from the manufacturer's drawing. The drawing gives the height as 9.75 mm; the product is sold as 9.7 mm.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ source\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eRound-back U channel edge trim with rounded lips\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e9.75 mm (listed as 9.7 mm)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot (channel) width\u003c\/td\u003e\n\u003ctd\u003e2 mm, parallel sides\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing and data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot depth\u003c\/td\u003e\n\u003ctd\u003e6.75 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSide wall thickness\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's technical data (\"thickness\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase thickness\u003c\/td\u003e\n\u003ctd\u003e3 mm (9.75 − 6.75)\u003c\/td\u003e\n\u003ctd\u003eDerived from manufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits panel thickness\u003c\/td\u003e\n\u003ctd\u003e2 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSolid EPDM (ethylene propylene diene monomer)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e65–75 IRHD (±5), stated as 65–75 Shore A\u003c\/td\u003e\n\u003ctd\u003eIRHD, manufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e10 MPa\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e500%\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e50 kN\/m\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e21%\u003c\/td\u003e\n\u003ctd\u003e22 h at 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eNo cracks\u003c\/td\u003e\n\u003ctd\u003e72 h at 40 °C, 25 pphm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: change in tensile strength\u003c\/td\u003e\n\u003ctd\u003e+9%\u003c\/td\u003e\n\u003ctd\u003e70 h at 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: change in elongation at break\u003c\/td\u003e\n\u003ctd\u003e0%\u003c\/td\u003e\n\u003ctd\u003e70 h at 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.06 kg per metre (30 m coil about 1.8 kg)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLengths available\u003c\/td\u003e\n\u003ctd\u003e12, 13, 14 … 29 m, or a full 30 m coil (one continuous piece)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003eabout −40 °C to +120 °C, \u003cem\u003etypical for EPDM, not tested on this profile\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003eGeneral EPDM data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eNot stated; extruded rubber is normally made to ISO 3302-1 tolerance classes\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThis profile is extruded from a solid EPDM compound. EPDM resists weathering, ozone, UV and water, and keeps its flexibility over time. The test results in the table come from the manufacturer's data sheet for this profile.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer does not state any food-contact, WRAS, REACH, RoHS or fire approval for this product, so we do not claim one. If your application needs a certified material, please contact us before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-u-channel-7mm-x-9-7mm-how-it-fits.png?v=1795078168\" alt=\"How it fits: section of the 7 x 9.7 mm EPDM U channel pushed onto a 2 mm panel edge, with four fitting steps\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:640px;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eChoosing your length\u003c\/h3\u003e\n\u003cp\u003eAdd up the total length of edge to be covered and allow about 5% extra for cutting and joints. For example, a 2,440 × 1,220 mm sheet edged on all four sides needs about 7.3 m, so a 15 m length covers two sheets. The price covers one continuous piece of the length you choose.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003cth\u003ePrice inc VAT\u003c\/th\u003e\n\u003cth\u003ePrice per metre\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e12 m\u003c\/td\u003e\n\u003ctd\u003e£219.78\u003c\/td\u003e\n\u003ctd\u003e£18.32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15 m\u003c\/td\u003e\n\u003ctd\u003e£274.74\u003c\/td\u003e\n\u003ctd\u003e£18.32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20 m\u003c\/td\u003e\n\u003ctd\u003e£366.30\u003c\/td\u003e\n\u003ctd\u003e£18.32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e25 m\u003c\/td\u003e\n\u003ctd\u003e£457.89\u003c\/td\u003e\n\u003ctd\u003e£18.32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e29 m\u003c\/td\u003e\n\u003ctd\u003e£531.15\u003c\/td\u003e\n\u003ctd\u003e£18.32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e30 m full coil\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e£477.00\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e£15.90\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eNeed 27 m or more? The full 30 m coil costs less than any length from 27 m to 29 m.\u003c\/p\u003e\n\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEdges of 2 mm steel, aluminium and composite panels on guards, enclosures and machine covers\u003c\/li\u003e\n\u003cli\u003e2 mm acrylic and polycarbonate screens, displays and protective shields\u003c\/li\u003e\n\u003cli\u003eGlass and glazing edges, vending machines, shop fittings and cabinet panels\u003c\/li\u003e\n\u003cli\u003eDoors, hatches and access panels that need a thick, soft, safe edge\u003c\/li\u003e\n\u003cli\u003eStair and step edges, running boards and trailer panels\u003c\/li\u003e\n\u003cli\u003eBonded into aluminium window channels as a push-in seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eDeburr and clean the edge. Check the sheet is 2 mm thick.\u003c\/li\u003e\n\u003cli\u003eStart at a corner and press the channel on with your thumb as you work along.\u003c\/li\u003e\n\u003cli\u003eOn outside corners, ease the trim round the bend. On tight corners, cut a small V-notch out of the legs.\u003c\/li\u003e\n\u003cli\u003eCut a few millimetres long with a sharp knife, then push the ends together into a tight butt joint.\u003c\/li\u003e\n\u003cli\u003eFor a sealed or permanent fit, run a bead of PU or silicone sealant into the channel first.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat panel thickness does it fit?\u003c\/strong\u003e\u003cbr\u003e2 mm sheet. The slot is 2 mm wide with parallel sides, so it grips a 2 mm edge firmly along its full 6.75 mm depth. Thinner sheet can be packed out by bonding a thin strip inside the channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I measure what I need?\u003c\/strong\u003e\u003cbr\u003eMeasure the panel thickness with a caliper first, then measure the total edge length in metres and round up. Allow about 5% extra for cuts and joints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much of the panel face does it cover?\u003c\/strong\u003e\u003cbr\u003eThe slot is 6.75 mm deep, so the trim covers the edge and about 6.75 mm of each face once pushed fully home. The finished edge is 7 mm thick.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose this profile over a lighter U channel?\u003c\/strong\u003e\u003cbr\u003eIts 3 mm base and 2.5 mm walls make a thicker bumper than most 2 mm trims, so it gives more impact protection on edges that people or equipment knock against.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. EPDM is chosen for outdoor use because it resists weathering and ozone. This compound passed a 72 h ozone test with no cracks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer has not published a temperature range for this profile. EPDM is typically used from about −40 °C to +120 °C, but this has not been tested on this profile. The compound did pass heat ageing for 70 h at 70 °C with little change in properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eUse a sharp knife or heavy shears and cut square. Butt the ends together tightly. For a sealed joint, add a little cyanoacrylate glue or sealant to the cut faces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it soft or firm?\u003c\/strong\u003e\u003cbr\u003eAt 65–75 Shore A it is medium-firm: soft enough to absorb knocks, and firm enough to hold its shape and grip the panel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is the 30 m coil cheaper than 29 m?\u003c\/strong\u003e\u003cbr\u003e30 m is a full, uncut coil, so there is no cutting or handling, and it is priced lower. If you need 27 m or more, the coil is the cheaper buy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food-safe or certified?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states no food-contact or other approvals for this product, so we do not claim any. Ask us about certified alternatives.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it in stock?\u003c\/strong\u003e\u003cbr\u003eYes. All lengths are held in stock and dispatched from the UK.\u003c\/p\u003e\n\n\u003ch3\u003eRelated profiles\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-rubber-u-channel-6mm-x-8-5mm-per-length\"\u003eEPDM U Channel 6 × 8.5 mm, for 2 mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-u-channel-5-4mm-x-9-7mm-black-rubber-edge-trim-per-metre\"\u003eEPDM U Channel 5.4 × 9.7 mm, for 1.5–2 mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-u-channel-7mm-x-21mm-for-2mm-panels-cut-lengths\"\u003eEPDM U Channel 7 × 21 mm deep grip, for 2 mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-round-u-channel-7mm-x-7mm-1-6mm-panel-cut-length\"\u003eEPDM Round U Channel 7 × 7 mm, for 1.6 mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help choosing? Call \u003ca href=\"tel:+441282277786\"\u003e+44 1282 277786\u003c\/a\u003e or email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"12 m","offer_id":56590653194619,"sku":"IP-EPDMU-7X9.7-12M","price":219.78,"currency_code":"GBP","in_stock":true},{"title":"13 m","offer_id":56590653227387,"sku":"IP-EPDMU-7X9.7-13M","price":238.11,"currency_code":"GBP","in_stock":true},{"title":"14 m","offer_id":56590653260155,"sku":"IP-EPDMU-7X9.7-14M","price":256.41,"currency_code":"GBP","in_stock":true},{"title":"15 m","offer_id":56590653292923,"sku":"IP-EPDMU-7X9.7-15M","price":274.74,"currency_code":"GBP","in_stock":true},{"title":"16 m","offer_id":56590653325691,"sku":"IP-EPDMU-7X9.7-16M","price":293.04,"currency_code":"GBP","in_stock":true},{"title":"17 m","offer_id":56590653358459,"sku":"IP-EPDMU-7X9.7-17M","price":311.37,"currency_code":"GBP","in_stock":true},{"title":"18 m","offer_id":56590653391227,"sku":"IP-EPDMU-7X9.7-18M","price":329.67,"currency_code":"GBP","in_stock":true},{"title":"19 m","offer_id":56590653423995,"sku":"IP-EPDMU-7X9.7-19M","price":348.0,"currency_code":"GBP","in_stock":true},{"title":"20 m","offer_id":56590653456763,"sku":"IP-EPDMU-7X9.7-20M","price":366.3,"currency_code":"GBP","in_stock":true},{"title":"21 m","offer_id":56590653489531,"sku":"IP-EPDMU-7X9.7-21M","price":384.63,"currency_code":"GBP","in_stock":true},{"title":"22 m","offer_id":56590653522299,"sku":"IP-EPDMU-7X9.7-22M","price":402.93,"currency_code":"GBP","in_stock":true},{"title":"23 m","offer_id":56590653555067,"sku":"IP-EPDMU-7X9.7-23M","price":421.26,"currency_code":"GBP","in_stock":true},{"title":"24 m","offer_id":56590653587835,"sku":"IP-EPDMU-7X9.7-24M","price":439.56,"currency_code":"GBP","in_stock":true},{"title":"25 m","offer_id":56590653620603,"sku":"IP-EPDMU-7X9.7-25M","price":457.89,"currency_code":"GBP","in_stock":true},{"title":"26 m","offer_id":56590653653371,"sku":"IP-EPDMU-7X9.7-26M","price":476.19,"currency_code":"GBP","in_stock":true},{"title":"27 m","offer_id":56590653686139,"sku":"IP-EPDMU-7X9.7-27M","price":494.52,"currency_code":"GBP","in_stock":true},{"title":"28 m","offer_id":56590653718907,"sku":"IP-EPDMU-7X9.7-28M","price":512.82,"currency_code":"GBP","in_stock":true},{"title":"29 m","offer_id":56590653751675,"sku":"IP-EPDMU-7X9.7-29M","price":531.15,"currency_code":"GBP","in_stock":true},{"title":"30 m (full coil)","offer_id":56590653784443,"sku":"IP-EPDMU-7X9.7-30M-COIL","price":477.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-u-channel-7mm-x-9-7mm-black-end-view.png?v=1795078169","url":"https:\/\/industrial-polymers.co.uk\/products\/epdm-u-channel-7mm-x-9-7mm-2mm-panel-cut-length","provider":"Industrial-polymers ","version":"1.0","type":"link"}