{"product_id":"epdm-u-channel-9mm-x-9mm-1-6mm-panel-fit-cut-length","title":"EPDM Round U Channel – 9mm x 9mm – Fits 1.6mm Panel – Cut Length or 30m Coil","description":"\u003cp\u003e\u003cstrong\u003eA solid, round rubber bumper for thin 1.6 mm sheet.\u003c\/strong\u003e This black EPDM round U channel is a 9 mm diameter solid section with a narrow parallel slot 1.6 mm wide and 4.5 mm deep. It leaves 3.7 mm of rubber on each side of the panel and 4.5 mm of solid rubber over the cut edge, so a thin, sharp sheet edge becomes a smooth, cushioned 9 mm round. Choose one continuous length from 7 m to 29 m, or a full 30 m coil. Every length is held in stock in the UK.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 1.6 mm panels:\u003c\/strong\u003e parallel 1.6 mm slot, 4.5 mm deep, grips both faces of 16-gauge sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 × 9 mm solid round section:\u003c\/strong\u003e 3.7 mm side walls and 4.5 mm of solid rubber over the edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid EPDM, 65–75 Shore A:\u003c\/strong\u003e tensile strength 10 MPa, elongation at break 500%, tear strength 50 kN\/m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for outdoor use:\u003c\/strong\u003e no cracks after a 72 h ozone test, and little change after heat ageing at 70 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo tools needed:\u003c\/strong\u003e push on by hand and cut with a sharp knife. Bond with PU or silicone sealant for a permanent or sealed fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAny length from 7 m to 30 m:\u003c\/strong\u003e one continuous piece. The 30 m full coil has the lowest price per metre.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-round-u-channel-9mm-x-9mm-technical-drawing.png?v=1795130501\" alt=\"Technical drawing of the EPDM round U channel 9 x 9 mm: 9 mm round section, 1.6 mm slot 4.5 mm deep, 3.7 mm side walls, fits 1.6 mm panels\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eNominal dimensions in mm, free (unfitted) state. Width, height, slot width, slot depth and wall thickness are the manufacturer's figures. The 4.5 mm below the slot is worked out from them (9.0 − 4.5).\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ source\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eRound U channel (solid round section with a centre slot)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e9 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e9 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot (channel) width\u003c\/td\u003e\n\u003ctd\u003e1.6 mm, parallel sides\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing and data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot depth\u003c\/td\u003e\n\u003ctd\u003e4.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSide wall thickness\u003c\/td\u003e\n\u003ctd\u003e3.7 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's technical data (\"thickness\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolid rubber below slot\u003c\/td\u003e\n\u003ctd\u003e4.5 mm (9.0 − 4.5)\u003c\/td\u003e\n\u003ctd\u003eDerived from manufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits panel thickness\u003c\/td\u003e\n\u003ctd\u003e1.6 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSolid EPDM (ethylene propylene diene monomer)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e65–75 IRHD (±5), stated as 65–75 Shore A\u003c\/td\u003e\n\u003ctd\u003eIRHD, manufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e10 MPa\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e500%\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e50 kN\/m\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e21%\u003c\/td\u003e\n\u003ctd\u003e22 h at 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eNo cracks\u003c\/td\u003e\n\u003ctd\u003e72 h at 40 °C, 25 pphm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: change in tensile strength\u003c\/td\u003e\n\u003ctd\u003e+9%\u003c\/td\u003e\n\u003ctd\u003e70 h at 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: change in elongation at break\u003c\/td\u003e\n\u003ctd\u003e0%\u003c\/td\u003e\n\u003ctd\u003e70 h at 70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.07 kg per metre (30 m coil about 2.1 kg)\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLengths available\u003c\/td\u003e\n\u003ctd\u003e7, 8, 9 … 29 m, or a full 30 m coil (one continuous piece)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003eabout −40 °C to +120 °C, \u003cem\u003etypical for EPDM, not tested on this profile\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003eGeneral EPDM data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eNot stated; extruded rubber is normally made to ISO 3302-1 tolerance classes\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThis profile is extruded from a solid EPDM compound. EPDM resists weathering, ozone, UV and water, and stays flexible over time. The test results in the table come from the manufacturer's data sheet for this profile.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer does not state any food-contact, WRAS, REACH, RoHS or fire approval for this product, so we do not claim one. If your application needs a certified material, please contact us before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-round-u-channel-9mm-x-9mm-how-it-fits.png?v=1795130502\" alt=\"How it fits: section of the 9 mm round EPDM U channel pushed onto a 1.6 mm panel edge, with four fitting steps\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:640px;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eChoosing your length\u003c\/h3\u003e\n\u003cp\u003eAdd up the total length of edge to be covered and allow about 5% extra for cutting and joints. For example, a 2,500 × 1,250 mm sheet edged on all four sides needs about 7.5 m, so an 8 m length covers one sheet and a 16 m length covers two. The price covers one continuous piece of the length you choose.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003cth\u003ePrice inc VAT\u003c\/th\u003e\n\u003cth\u003ePrice per metre\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e7 m\u003c\/td\u003e\n\u003ctd\u003e£167.01\u003c\/td\u003e\n\u003ctd\u003e£23.86\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10 m\u003c\/td\u003e\n\u003ctd\u003e£238.59\u003c\/td\u003e\n\u003ctd\u003e£23.86\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15 m\u003c\/td\u003e\n\u003ctd\u003e£357.90\u003c\/td\u003e\n\u003ctd\u003e£23.86\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20 m\u003c\/td\u003e\n\u003ctd\u003e£477.18\u003c\/td\u003e\n\u003ctd\u003e£23.86\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e25 m\u003c\/td\u003e\n\u003ctd\u003e£596.49\u003c\/td\u003e\n\u003ctd\u003e£23.86\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e29 m\u003c\/td\u003e\n\u003ctd\u003e£691.92\u003c\/td\u003e\n\u003ctd\u003e£23.86\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e30 m full coil\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e£617.40\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e£20.58\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eNeed 26 m or more? The full 30 m coil costs less than any length from 26 m to 29 m.\u003c\/p\u003e\n\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEdges of 1.6 mm (16-gauge) steel and aluminium sheet on guards, enclosures, cabinets and machine covers\u003c\/li\u003e\n\u003cli\u003eThin acrylic, polycarbonate and composite panels on screens and displays\u003c\/li\u003e\n\u003cli\u003eGlass and glazing edges, vending machines and shop fittings\u003c\/li\u003e\n\u003cli\u003eDoors, hatches and access panels that need a soft, rounded safe edge\u003c\/li\u003e\n\u003cli\u003eStair edges, running boards, trailer and vehicle panels\u003c\/li\u003e\n\u003cli\u003eBonded into aluminium window channels as a push-in seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eDeburr and clean the edge. Check the sheet is 1.6 mm thick.\u003c\/li\u003e\n\u003cli\u003eStart at a corner and press the channel on with your thumb as you work along.\u003c\/li\u003e\n\u003cli\u003eOn outside corners, ease the trim round the bend. On tight corners, cut a small V-notch out of the section below the slot.\u003c\/li\u003e\n\u003cli\u003eCut a few millimetres long with a sharp knife, then push the ends together into a tight butt joint.\u003c\/li\u003e\n\u003cli\u003eFor a sealed or permanent fit, run a bead of PU or silicone sealant into the channel first.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat panel thickness does it fit?\u003c\/strong\u003e\u003cbr\u003e1.6 mm sheet (16 gauge). The slot is 1.6 mm wide with parallel sides, so it grips a 1.6 mm edge along its full depth. A thinner sheet can be packed out by bonding a thin strip inside the channel. It is not designed for sheet thicker than 1.6 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I measure what I need?\u003c\/strong\u003e\u003cbr\u003eMeasure the panel thickness with a caliper first, then measure the total edge length in metres and round up. Allow about 5% extra for cuts and joints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much of the panel face does it cover?\u003c\/strong\u003e\u003cbr\u003eThe slot is 4.5 mm deep, so the trim covers the edge and about 4.5 mm of each face once pushed fully home. The finished edge is a 9 mm round.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it used for?\u003c\/strong\u003e\u003cbr\u003eGuarding sharp thin-sheet edges on machine guards, enclosures, glazing, vending machines, doors, steps and trailers. The solid round section makes a good bumper where people or equipment knock against an edge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. EPDM is chosen for outdoor use because it resists weathering and ozone. This compound passed a 72 h ozone test with no cracks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer has not published a temperature range for this profile. EPDM is typically used from about −40 °C to +120 °C, but this has not been tested on this profile. The compound did pass heat ageing for 70 h at 70 °C with little change in properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eUse a sharp knife or heavy shears and cut square. Butt the ends together tightly. For a sealed joint, add a little cyanoacrylate glue or sealant to the cut faces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it soft or firm?\u003c\/strong\u003e\u003cbr\u003eAt 65–75 Shore A it is medium-firm: soft enough to absorb knocks, and firm enough to hold its round shape and grip the panel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is the 30 m coil cheaper than 29 m?\u003c\/strong\u003e\u003cbr\u003e30 m is a full, uncut coil, so there is no cutting or handling, and it is priced lower. If you need 26 m or more, the coil is the cheaper buy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food-safe or certified?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states no food-contact or other approvals for this product, so we do not claim any. Ask us about certified alternatives.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it in stock?\u003c\/strong\u003e\u003cbr\u003eYes. All lengths are held in stock and dispatched from the UK.\u003c\/p\u003e\n\n\u003ch3\u003eData sheet\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-u-channel-9mm-x-9mm-1-6mm-panel-fit-cut-length-data-sheet.pdf?v=1794992697\" target=\"_blank\" rel=\"noopener\"\u003eDownload the technical data sheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch3\u003eRelated profiles\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-round-u-channel-7mm-x-7mm-1-6mm-panel-cut-length\"\u003eEPDM Round U Channel 7 × 7 mm, for 1.6 mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-u-channel-4-5mm-x-9mm-black-rubber-edge-trim\"\u003eEPDM U Channel 4.5 × 9 mm, for 1.6 mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/neoprene-u-channel-6-5mm-x-10-5mm-1-6mm-panel-cut-length\"\u003eNeoprene Round U Channel 6.5 × 10.5 mm, for 1.6 mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/neoprene-u-channel-6mm-x-13-5mm-profile-1-6mm-panel-cut-lengths\"\u003eNeoprene Round U Channel 6 × 13.5 mm, for 1.6 mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help choosing? Call \u003ca href=\"tel:+441282277786\"\u003e+44 1282 277786\u003c\/a\u003e or email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"Industrial Polymers","offers":[{"title":"7m","offer_id":56588880281979,"sku":"IP-EPDMU-9X9X1.6-7","price":167.01,"currency_code":"GBP","in_stock":true},{"title":"8m","offer_id":56588880314747,"sku":"IP-EPDMU-9X9X1.6-8","price":190.86,"currency_code":"GBP","in_stock":true},{"title":"9m","offer_id":56588880347515,"sku":"IP-EPDMU-9X9X1.6-9","price":214.74,"currency_code":"GBP","in_stock":true},{"title":"10m","offer_id":56588880380283,"sku":"IP-EPDMU-9X9X1.6-10","price":238.59,"currency_code":"GBP","in_stock":true},{"title":"11m","offer_id":56588880413051,"sku":"IP-EPDMU-9X9X1.6-11","price":262.44,"currency_code":"GBP","in_stock":true},{"title":"12m","offer_id":56588880445819,"sku":"IP-EPDMU-9X9X1.6-12","price":286.32,"currency_code":"GBP","in_stock":true},{"title":"13m","offer_id":56588880478587,"sku":"IP-EPDMU-9X9X1.6-13","price":310.17,"currency_code":"GBP","in_stock":true},{"title":"14m","offer_id":56588880511355,"sku":"IP-EPDMU-9X9X1.6-14","price":334.02,"currency_code":"GBP","in_stock":true},{"title":"15m","offer_id":56588880544123,"sku":"IP-EPDMU-9X9X1.6-15","price":357.9,"currency_code":"GBP","in_stock":true},{"title":"16m","offer_id":56588880576891,"sku":"IP-EPDMU-9X9X1.6-16","price":381.75,"currency_code":"GBP","in_stock":true},{"title":"17m","offer_id":56588880609659,"sku":"IP-EPDMU-9X9X1.6-17","price":405.6,"currency_code":"GBP","in_stock":true},{"title":"18m","offer_id":56588880642427,"sku":"IP-EPDMU-9X9X1.6-18","price":429.45,"currency_code":"GBP","in_stock":true},{"title":"19m","offer_id":56588880675195,"sku":"IP-EPDMU-9X9X1.6-19","price":453.33,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":56588880707963,"sku":"IP-EPDMU-9X9X1.6-20","price":477.18,"currency_code":"GBP","in_stock":true},{"title":"21m","offer_id":56588880740731,"sku":"IP-EPDMU-9X9X1.6-21","price":501.03,"currency_code":"GBP","in_stock":true},{"title":"22m","offer_id":56588880773499,"sku":"IP-EPDMU-9X9X1.6-22","price":524.91,"currency_code":"GBP","in_stock":true},{"title":"23m","offer_id":56588880806267,"sku":"IP-EPDMU-9X9X1.6-23","price":548.76,"currency_code":"GBP","in_stock":true},{"title":"24m","offer_id":56588880839035,"sku":"IP-EPDMU-9X9X1.6-24","price":572.61,"currency_code":"GBP","in_stock":true},{"title":"25m","offer_id":56588880871803,"sku":"IP-EPDMU-9X9X1.6-25","price":596.49,"currency_code":"GBP","in_stock":true},{"title":"26m","offer_id":56588880904571,"sku":"IP-EPDMU-9X9X1.6-26","price":620.34,"currency_code":"GBP","in_stock":true},{"title":"27m","offer_id":56588880937339,"sku":"IP-EPDMU-9X9X1.6-27","price":644.19,"currency_code":"GBP","in_stock":true},{"title":"28m","offer_id":56588880970107,"sku":"IP-EPDMU-9X9X1.6-28","price":668.04,"currency_code":"GBP","in_stock":true},{"title":"29m","offer_id":56588881002875,"sku":"IP-EPDMU-9X9X1.6-29","price":691.92,"currency_code":"GBP","in_stock":true},{"title":"30m full coil","offer_id":56588881035643,"sku":"IP-EPDMU-9X9X1.6-30-COIL","price":617.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-u-channel-9mm-x-9mm-1-6mm-panel-fit-cut-length-studio.jpg?v=1794992701","url":"https:\/\/industrial-polymers.co.uk\/products\/epdm-u-channel-9mm-x-9mm-1-6mm-panel-fit-cut-length","provider":"Industrial-polymers ","version":"1.0","type":"link"}