{"product_id":"grey-silicone-p-extrusion-food-contact-grade-20mm-flange-25m-coil","title":"Food Contact Silicone P Extrusion – 20mm x 10mm, Ø10mm Hollow Bead, 3mm Flange – Grey 60 Shore A – 25m Coil","description":"\u003cp\u003e\u003cstrong\u003eA food contact silicone P seal for hygienic doors, hatches and lids.\u003c\/strong\u003e The profile is 20 mm wide overall. A hollow Ø10 mm bead squeezes shut against the door. A flat 3 mm thick flange gives you a 10 mm strip beside the bead to bond or clamp to the frame. It is made from grey 60 Shore A silicone to FDA 21 CFR 177.2600 and EC 1935\/2004, works from −40 °C to +200 °C, and comes as one continuous 25 m coil. It is held in stock in the UK for same-day dispatch.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 20 mm overall width × 10 mm height. Ø10 mm hollow bead, 3 mm flange.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFood contact:\u003c\/strong\u003e the maker states FDA 21 CFR 177.2600 and EC 1935\/2004 compliance. The silicone is non-toxic, non-leaching and pyrogen-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e −40 °C to +200 °C in service, so it suits ovens, provers, steam cabinets and chillers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeals a 6–8 mm gap:\u003c\/strong\u003e the hollow bead compresses easily and springs back for thousands of door cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrey, non-marking:\u003c\/strong\u003e it will not stain stainless steel, glass or painted panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 m continuous coil:\u003c\/strong\u003e enough for several door frames, with no joins in the run.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-p-extrusion-20mm-x-10mm-technical-drawing.png?v=1795316269\" alt=\"Technical drawing of the 20 x 10 mm food contact silicone P extrusion: Ø10 mm hollow bead, 3 mm thick flange, 10 mm flange beyond the bead, 20 mm overall, dimensions in mm\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eThe bore (≈ Ø4.5 mm) and bead wall (≈ 2.75 mm) are scaled from the maker's section drawing. All other sizes are stated nominal values.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eMethod \/ basis\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eP section (hollow round bead with a flat flange)\u003c\/td\u003e\n\u003ctd\u003eMaker's section drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, ISO 3302-1 class E2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height (bead diameter)\u003c\/td\u003e\n\u003ctd\u003e10 mm (Ø10 mm bead)\u003c\/td\u003e\n\u003ctd\u003eNominal, ISO 3302-1 class E2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlange thickness\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, ISO 3302-1 class E2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree flange beyond the bead\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003ctd\u003eDerived: 20 mm overall − Ø10 mm bead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBore \/ bead wall\u003c\/td\u003e\n\u003ctd\u003e≈ Ø4.5 mm \/ ≈ 2.75 mm\u003c\/td\u003e\n\u003ctd\u003eScaled from the maker's drawing, not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e25 m continuous coil\u003c\/td\u003e\n\u003ctd\u003eCut length tolerance ISO 3302-1 class L2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSilicone rubber (VMQ), food contact grade\u003c\/td\u003e\n\u003ctd\u003eMaker's data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003ctd\u003eMaker's data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e60° Shore A\u003c\/td\u003e\n\u003ctd\u003eShore A durometer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e−40 °C to +200 °C\u003c\/td\u003e\n\u003ctd\u003eMaker's product rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompound temperature range\u003c\/td\u003e\n\u003ctd\u003e−65 °C to +200 °C\u003c\/td\u003e\n\u003ctd\u003eMaker's compound datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.15 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eMaker's datasheet, 61 Shore A grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e440 %\u003c\/td\u003e\n\u003ctd\u003eMaker's datasheet, 61 Shore A grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e11 N\/mm\u003c\/td\u003e\n\u003ctd\u003eMaker's datasheet, 61 Shore A grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e31 %\u003c\/td\u003e\n\u003ctd\u003e22 h at 175 °C, maker's datasheet, 61 Shore A grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eNot stated by the maker for this compound\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need a certificate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1 E2 (section) \/ L2 (length)\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. weight\u003c\/td\u003e\n\u003ctd\u003e≈ 0.11 kg per metre, ≈ 2.8 kg per coil\u003c\/td\u003e\n\u003ctd\u003eCalculated from section area × 1.15 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eIP-SPEX-20-STD\u003c\/td\u003e\n\u003ctd\u003eIndustrial Polymers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFDA 21 CFR 177.2600:\u003c\/strong\u003e the maker states compliance for rubber articles in repeated contact with food.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC 1935\/2004:\u003c\/strong\u003e the maker states compliance with the EU framework regulation for food contact materials.\u003c\/li\u003e\n\u003cli\u003eThe maker states the seal is made in a clean environment from FDA-approved silicone and is non-toxic, non-leaching and pyrogen-free. It will not taint or flavour food.\u003c\/li\u003e\n\u003cli\u003eSilicone has very good weathering resistance and is waterproof. Its oil resistance is only fair, so do not use it where it stays wet with mineral oils or fuels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003csmall\u003eOnly the approvals above are claimed for this product. We do not claim WRAS, REACH or RoHS approval for this profile.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003eFix the flat flange to the frame and leave the bead facing the door. When the door closes, the hollow bead flattens by about a third and seals the gap. For best results the closed gap should be about \u003cstrong\u003e6–8 mm\u003c\/strong\u003e. A smaller gap crushes the bead, which makes the door hard to latch. A gap of 10 mm or more will not seal.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonded:\u003c\/strong\u003e degrease both surfaces, then run a thin bead of food-safe silicone adhesive along the flange.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamped:\u003c\/strong\u003e trap the 10 mm free flange under a stainless retaining strip or a folded lip on the frame.\u003c\/li\u003e\n\u003cli\u003eLay it in without stretching. Silicone that is stretched while fitting pulls back over time and leaves gaps at the corners.\u003c\/li\u003e\n\u003cli\u003eAt corners, cut a V notch in the flange so the bead follows the bend without kinking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDoors and hatches on food processing machines and hygienic cabinets\u003c\/li\u003e\n\u003cli\u003eCovers and lids on hoppers, mixing tanks and vessels\u003c\/li\u003e\n\u003cli\u003eDoor seals on commercial ovens, provers, steamers and drying cabinets (up to 200 °C)\u003c\/li\u003e\n\u003cli\u003eGlass panel doors on display cabinets and inspection windows\u003c\/li\u003e\n\u003cli\u003eEnclosures for pharmaceutical, laboratory and electrical equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich P seal do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFood contact silicone P 20 × 10 mm (this item)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGaps of about 6–8 mm on food and pharma equipment up to 200 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/silicone-p-profile-seal-16mm-flange-x-5mm-bead-25m-coil\"\u003eSilicone P 16 × 5 mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSmall gaps of about 3–4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/silicone-p-extrusion-food-contact-grade-25mm-x-12mm-25m-coil\"\u003eFood contact silicone P 25 × 12 mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSlightly larger gaps, about 8–10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/high-temperature-silicone-p-extrusion-20mm-x-8mm-10m-coil\"\u003eHigh-temperature silicone P 20 × 8 mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eA similar size for ovens running hotter than 200 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat gap does the 20 × 10 mm P seal fill?\u003c\/strong\u003e\u003cbr\u003eAim for a closed gap of about 6–8 mm. That flattens the 10 mm bead by 20–40 %, which seals well and still lets the door latch easily. If your gap is 3–4 mm, choose the 16 × 5 mm profile. If it is 8–10 mm, choose the 25 × 12 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it safe for direct contact with food?\u003c\/strong\u003e\u003cbr\u003eYes. The maker states the silicone complies with FDA 21 CFR 177.2600 and EC 1935\/2004, and that it is non-toxic, non-leaching and pyrogen-free. It will not taint food.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe seal is rated from −40 °C to +200 °C in service, so it suits freezers and chillers as well as ovens and provers. Above 200 °C, use our high-temperature silicone P extrusions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I fix it in place?\u003c\/strong\u003e\u003cbr\u003eBond the 3 mm flange with a food-safe silicone adhesive, or clamp the 10 mm free flange under a retaining strip. Make sure the surface is clean, dry and free of grease before you fit it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut it square with a sharp knife or shears. For a continuous loop, butt the two ends and bond them with silicone adhesive. At corners, notch the flange so that the bead turns without kinking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors or washed down?\u003c\/strong\u003e\u003cbr\u003eYes. Silicone resists UV, weathering, water and steam, and it stands up to normal hygienic wash-down. Keep it away from long soaking in mineral oils or fuels, because its oil resistance is only fair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the coil, and can I buy a shorter length?\u003c\/strong\u003e\u003cbr\u003eEach coil is one continuous 25 m length. That is enough to go round about six 1 m × 1 m door frames. Contact us if you need a different length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it in stock?\u003c\/strong\u003e\u003cbr\u003eYes. We hold it in stock in the UK, and orders placed before the cut-off go out the same day.\u003c\/p\u003e\n\u003cp\u003eNeed a certificate of conformity or help choosing a size? Contact \u003ca href=\"\/pages\/contact\"\u003eour team\u003c\/a\u003e on +44 1282 277786 or at sales@industrial-polymers.co.uk.\u003c\/p\u003e\n","brand":"Industrial Polymers","offers":[{"title":"25 m coil","offer_id":56584068563323,"sku":"IP-SPEX-20-STD","price":1310.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-p-extrusion-20mm-x-10mm-true-scale-render.png?v=1795316270","url":"https:\/\/industrial-polymers.co.uk\/products\/grey-silicone-p-extrusion-food-contact-grade-20mm-flange-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}