{"product_id":"matting-accessories-edging-snap-track-clips-hooks","title":"Matting Accessories – PVC \u0026 Aluminium Ramp Edging, Snap Track, Connector Clips, Floor Hooks \u0026 Cold Weld Paste","description":"\u003ch2\u003eThe parts that finish the job\u003c\/h2\u003e\n\u003cp\u003eMatting is loose laid, which makes it quick to fit and easy to lift for cleaning. What it still needs is a ramped edge wherever someone walks onto it, and a way of joining rolls together when the run is wider or longer than a single roll. These are those parts.\u003c\/p\u003e\n\u003cp\u003eEverything here is the genuine accessory range for our open-grid and open-rib matting — the profiles are moulded to sit flush against the mat edge, not a generic trim that leaves a lip.\u003c\/p\u003e\n\n\u003ch3\u003eWhich part fits which mat\u003c\/h3\u003e\n\u003cp\u003eEdging and snap track are height-matched to the mat. Getting this right is the whole job — a 14mm edging against a 10mm mat leaves a step.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePVC ramp edging 14mm × 60mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15mm fine open mesh · 15mm wide open grid · 14mm roof and walkway matting. The standard choice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePVC ramp edging 14mm × 100mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eThe same mats, where a longer, shallower ramp is wanted — busier walkways and trolley-adjacent routes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePVC low-profile edging 10mm × 50mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10mm open-rib anti-fatigue matting. Supplied two rolls per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAluminium ramp edging 14mm × 45mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14–15mm matting where a hard-wearing metal edge is preferred. Screw-fixed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSnap track 14mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJoining 14–15mm matting, roll to roll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSnap track 10.5mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJoining 10mm open-rib matting, roll to roll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector clips (dual purpose)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll our open-grid matting. Clip into the underside to join side-to-side or end-to-end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFloor hooks\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSecuring matting to the floor in a high-traffic gangway. Supplied with screws and plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCold weld paste\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBonding edging and snap track joints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eNot sure which height your mat is? Send us the product or a photo of the cut edge and we will tell you.\u003c\/p\u003e\n\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOne 10m roll, both long edges exposed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 × edging rolls (10.1m each)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOne 10m roll against a wall, one long edge exposed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 × edging roll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRoll ends exposed in a walkway\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAdd edging equal to the roll width per end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTwo rolls joined side-to-side or end-to-end\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 pack of connector clips (10) per joint, or snap track at 2.5m per section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCold weld paste\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOne tube per 10m of edging or snap track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eEdges that tuck against a wall, a bench plinth or a machine base do not need edging — only the edges people actually cross.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePVC ramp edging 14mm × 60mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14mm high × 60mm wide, 10.1m roll. Black, dark grey, dark brown, holly green, Oxford blue or yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePVC ramp edging 14mm × 100mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14mm high × 100mm wide, 10.1m roll. Dark grey, yellow or black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePVC low-profile edging 10mm × 50mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10mm high × 50mm wide, 10.1m roll, two rolls per pack. Black or dark grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAluminium ramp edging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14mm high × 45mm wide, 2m section. Supplied with fixing screws, plugs, one joining insert and one right-angled insert. Anodised aluminium or powder-coated yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSnap track 14mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-part, 14mm high × 2.5m. Welded together over the joint. Dark grey or black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSnap track 10.5mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-part, 10.5mm high × 2.5m. Dark grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector clips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual purpose, 14mm. Pack of 10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSmall floor hooks\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePack of 10 with screws and plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLarge floor hooks\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePack of 10 with screws and plugs. For heavier matting and busier routes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCold weld paste\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e132g tube, Type T liquid in a Type C tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePVC edging\u003c\/strong\u003e — lay it against the mat edge so the square shoulder butts the mat and the ramp falls to the floor. Mitre the corners with a sharp knife and bond the joint with cold weld paste.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminium edging\u003c\/strong\u003e — position, mark, drill and screw down using the supplied plugs. Use the joining insert where two lengths meet and the right-angled insert at corners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSnap track\u003c\/strong\u003e — lay the base section under the two mat edges, press the cap section in over the top, and weld the two together with paste.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector clips\u003c\/strong\u003e — lift the two mat edges, press a clip into the underside grid so it bridges both, and lower back down. Space them evenly along the joint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor hooks\u003c\/strong\u003e — drill, plug and screw into the floor so the hook catches the mat underside.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eColours\u003c\/h3\u003e\n\u003cp\u003eColour options vary by part and are listed in the specification table above. Tell us which colour you need in the order notes, or we will call to confirm before despatch.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know which height edging I need?\u003c\/strong\u003e\u003cbr\u003e\nMatch it to the mat thickness: 14mm edging for our 15mm mats and 14mm roof matting, 10mm low-profile edging for the 10mm open-rib anti-fatigue mat. If you are unsure, send a photo of the mat's cut edge and we will identify it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs cold weld paste included with the edging?\u003c\/strong\u003e\u003cbr\u003e\nEdging and snap track are normally supplied with paste. Order additional tubes here if you are running long lengths or want a spare — allow one tube per 10m.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut the edging to length?\u003c\/strong\u003e\u003cbr\u003e\nYes. A sharp utility knife is enough for PVC. Aluminium sections cut with a hacksaw or a fine-tooth blade.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClips or snap track — which should I use?\u003c\/strong\u003e\u003cbr\u003e\nClips are quicker and cheaper and sit hidden under the mat, which suits most joints. Snap track gives a continuous bridged joint across the full length and is the better choice on a long run or where a trolley wheel might catch the seam.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to edge every side?\u003c\/strong\u003e\u003cbr\u003e\nOnly the edges people walk over. Edges tucked against a wall, plinth or machine base can be left as they are.\u003c\/p\u003e\n\n\u003ch3\u003eOrdering for a job\u003c\/h3\u003e\n\u003cp\u003eSend us the layout — the mat, the run dimensions, and which edges are exposed — and we will list the parts and quantities for you. There is no charge for the takeoff.\u003c\/p\u003e","brand":"Industrial Polymers UK","offers":[{"title":"Connector clips, dual purpose — pack of 10","offer_id":56462600503675,"sku":"IPM-ACC-CLIP-DP","price":11.4,"currency_code":"GBP","in_stock":true},{"title":"Small floor hooks — pack of 10 with fixings","offer_id":56462600536443,"sku":"IPM-ACC-HOOK-S","price":10.62,"currency_code":"GBP","in_stock":true},{"title":"Large floor hooks — pack of 10 with fixings","offer_id":56462600569211,"sku":"IPM-ACC-HOOK-L","price":28.41,"currency_code":"GBP","in_stock":true},{"title":"Cold weld paste — 132g tube","offer_id":56462600601979,"sku":"IPM-ACC-PASTE","price":44.01,"currency_code":"GBP","in_stock":true},{"title":"Snap track 10.5mm × 2.5m (for 10mm matting)","offer_id":56462600634747,"sku":"IPM-ACC-TRACK-10","price":50.73,"currency_code":"GBP","in_stock":true},{"title":"Snap track 14mm × 2.5m (for 14–15mm matting)","offer_id":56462600667515,"sku":"IPM-ACC-TRACK-14","price":60.03,"currency_code":"GBP","in_stock":true},{"title":"Aluminium ramp edging 14mm × 45mm × 2m","offer_id":56462600700283,"sku":"IPM-ACC-EDGE-ALU","price":84.3,"currency_code":"GBP","in_stock":true},{"title":"PVC ramp edging 14mm × 60mm × 10.1m roll","offer_id":56462600733051,"sku":"IPM-ACC-EDGE-60","price":207.0,"currency_code":"GBP","in_stock":true},{"title":"PVC ramp edging 14mm × 100mm × 10.1m roll","offer_id":56462600765819,"sku":"IPM-ACC-EDGE-100","price":259.11,"currency_code":"GBP","in_stock":true},{"title":"PVC low-profile edging 10mm × 50mm × 10.1m (2 rolls)","offer_id":56462600798587,"sku":"IPM-ACC-EDGE-LP","price":259.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/acc1-edging-walkway.jpg?v=1789986587","url":"https:\/\/industrial-polymers.co.uk\/products\/matting-accessories-edging-snap-track-clips-hooks","provider":"Industrial-polymers ","version":"1.0","type":"link"}