{"product_id":"neoprene-sponge-strip-10mm-x-3mm-self-adhesive-10m","title":"Neoprene Sponge Strip – 10mm x 3mm, Self-Adhesive, Closed Cell – 10m Length","description":"\u003cp\u003eA thin, black \u003cstrong\u003eclosed-cell neoprene sponge strip, 10mm wide x 3mm thick\u003c\/strong\u003e, with a pressure-sensitive adhesive layer on its 10mm face. Peel back the liner, press it onto a clean flange, lid or frame, and it seals against air, dust and water once it is squeezed by just 15–20%. That makes it a good choice where a cover or panel closes to a gap of roughly 2.4–2.55mm and only light closing pressure is available. Supplied as one continuous 10m length, black, from UK stock.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10mm wide x 3mm thick, flat rectangular section; adhesive on the 10mm face\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeals at 15–20% compression\u003c\/strong\u003e, which means a closed gap of about 2.4–2.55mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosed-cell neoprene (CR) sponge:\u003c\/strong\u003e it does not soak up water (under 5% by volume) and resists oil, UV and ozone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft:\u003c\/strong\u003e 40–45 Shore OO, density 110–130 kg\/m³, so covers close without extra force\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e −30°C to +90°C working range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-extinguishing:\u003c\/strong\u003e flame resistance tested to FMVSS 302 and UL94 HF-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValue:\u003c\/strong\u003e £31.11 inc VAT per 10m length, which is about £3.11 per metre\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLids and covers on electrical, control and instrument enclosures\u003c\/li\u003e\n\u003cli\u003eInspection hatches, access panels and equipment housings\u003c\/li\u003e\n\u003cli\u003eVehicle, caravan and marine door, window and locker seals with small gaps\u003c\/li\u003e\n\u003cli\u003eAnti-rattle and vibration pads between metal, glass and plastic panels\u003c\/li\u003e\n\u003cli\u003eThin sound and thermal insulating strips, and energy-absorbing spacers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/neoprene-sponge-strip-10mm-x-3mm-technical-drawing.png?v=1795220443\" alt=\"Technical drawing of neoprene sponge strip 10mm x 3mm: 10mm width, 3mm thickness, adhesive and liner on the 10mm face, 15-20% sealing compression\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eNominal dimensions in mm, free state before compression. The 3mm thickness is the sponge alone; the adhesive and liner sit under the 10mm face.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eHow it seals\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/neoprene-sponge-strip-10mm-x-3mm-fitted-2-5mm-gap.png?v=1795220444\" alt=\"To-scale illustration of the 10 x 3mm neoprene sponge strip on a steel flange, before and after a cover closes to a 2.5mm gap\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eStick the 10mm face to the flange (or to the cover) so the strip lies flat. When the cover closes, the closed-cell sponge is squeezed and fills the gap. Because the cells are sealed, gas and liquid cannot pass through the strip itself; 15–20% squeeze (3mm down to about 2.4–2.55mm) is enough for an airtight seal.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ source\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSize and form\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eFlat rectangular strip, self-adhesive one side\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, manufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness (sponge, excluding adhesive)\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, manufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdhesive face\u003c\/td\u003e\n\u003ctd\u003eThe 10 mm (wide) face, with peel-off liner\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength supplied\u003c\/td\u003e\n\u003ctd\u003e10 m, one continuous piece\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.01 kg per metre (about 0.1 kg per 10 m)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eNot published for this product. Typical for cut neoprene sponge strip about ±0.5 mm on thickness (typical for neoprene sponge, not tested on this profile)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComposition\u003c\/td\u003e\n\u003ctd\u003eNeoprene (polychloroprene, CR) sponge\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCell structure\u003c\/td\u003e\n\u003ctd\u003eClosed cell\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e110–130 kg\/m³\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e40–45 Shore OO\u003c\/td\u003e\n\u003ctd\u003eShore OO durometer (manufacturer data sheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMechanical\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e7.4 kg\/cm² (≈ 0.73 MPa)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eOver 200%\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressive strength at 25% deflection\u003c\/td\u003e\n\u003ctd\u003e40 kPa (the supplier's product page also lists 55–85 kPa)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression needed to seal\u003c\/td\u003e\n\u003ctd\u003e15–20%\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003eNot published for this product\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003eNot published for this product\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eEnvironmental\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e−30°C to +90°C (the data sheet gives −26°C as the lower figure; design to −26°C for continuous cold use)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eUnder 5% by volume\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOil, UV and ozone\u003c\/td\u003e\n\u003ctd\u003eVery good oil resistance; good UV and ozone resistance\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlame resistance\u003c\/td\u003e\n\u003ctd\u003eSelf-extinguishing\u003c\/td\u003e\n\u003ctd\u003eFMVSS 302 and UL94 HF-1 (manufacturer data sheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlowing agents\u003c\/td\u003e\n\u003ctd\u003eCFC and HCFC free\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlame resistance:\u003c\/strong\u003e the manufacturer states the material is self-extinguishing to FMVSS 302 (US motor vehicle interior flammability) and UL94 HF-1 (foamed plastics).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental:\u003c\/strong\u003e manufactured CFC and HCFC free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot stated:\u003c\/strong\u003e the manufacturer makes no food-contact (FDA, EC 1935\/2004), drinking-water (WRAS), REACH or RoHS statement for this product, so do not use it where those approvals are required. Ask us if you need a food-safe or potable-water strip.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting tips\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the gap.\u003c\/strong\u003e Close the cover and measure the gap. This strip suits about 2.4–2.55mm; for larger gaps choose a thicker strip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the surface.\u003c\/strong\u003e Degrease with isopropyl alcohol and let it dry. The landing needs to be at least 10mm wide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeel as you go.\u003c\/strong\u003e Lift a short length of liner at a time and press the strip down firmly across its full width.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDon't stretch it.\u003c\/strong\u003e Lay the sponge in relaxed; stretched foam shrinks back and opens gaps at the ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut and join.\u003c\/strong\u003e Cut square with a sharp knife and butt the ends tightly; at corners, mitre or butt-joint rather than folding.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the price for one metre or the whole length?\u003c\/strong\u003e\u003cbr\u003eThe whole length. One unit is a single continuous 10m strip, about £3.11 per metre. Order 2 and you get two separate 10m strips.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gap will it seal?\u003c\/strong\u003e\u003cbr\u003eIt needs to be squeezed by 15–20%, so it seals a closed gap of about 2.4–2.55mm. If the cover closes tighter than about 2mm it will be hard to shut; if the gap is over 2.6mm the strip may not touch all the way along.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich side is sticky?\u003c\/strong\u003e\u003cbr\u003eThe wide 10mm face. It carries a pressure-sensitive adhesive under a peel-off liner, so the strip stands 3mm proud of the surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it stick to rough or painted surfaces?\u003c\/strong\u003e\u003cbr\u003eYes. The adhesive bonds to rough and smooth surfaces, including painted metal, glass and most rigid plastics, provided they are clean, dry and grease-free. Very low-energy plastics such as polythene and polypropylene may need a primer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it waterproof and suitable outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. It is a closed-cell sponge, so water and air cannot pass through it, and neoprene has good UV and ozone resistance for outdoor, automotive and marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperatures can it handle?\u003c\/strong\u003e\u003cbr\u003eThe working range is −30°C to +90°C. The data sheet gives −26°C as the lower figure, so for continuous cold service treat −26°C as the limit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it oil resistant?\u003c\/strong\u003e\u003cbr\u003eYes. Neoprene has very good resistance to oils and greases, which is why it is chosen over EPDM sponge for machinery and vehicle use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eUse a sharp knife or scissors and cut square. Butt the ends tightly together at joins; for a fully continuous seal, put a small dab of contact adhesive on the cut faces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it food-safe or WRAS approved?\u003c\/strong\u003e\u003cbr\u003eNo food-contact or WRAS approval is stated for this product. Contact us and we can suggest a silicone alternative.\u003c\/p\u003e\u003ch3\u003eDelivery and help\u003c\/h3\u003e\u003cp\u003eHeld in stock and dispatched from our UK warehouse. Trade and bulk orders are welcome. Not sure which thickness you need? Send us your gap measurement at \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e or call +44 1282 277786.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"10m strip","offer_id":56593496605051,"sku":"IP-CRSS-10X3-10M","price":31.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/neoprene-sponge-strip-10mm-x-3mm-black-10m.png?v=1795220444","url":"https:\/\/industrial-polymers.co.uk\/products\/neoprene-sponge-strip-10mm-x-3mm-self-adhesive-10m","provider":"Industrial-polymers ","version":"1.0","type":"link"}