{"product_id":"polyethylene-sponge-strip-12-5mm-x-2mm-self-adhesive-10m-roll","title":"Polyethylene Sponge Strip – 12.5mm x 2mm, Self-Adhesive – Closed-Cell PE Foam, Grey – 10m Roll","description":"\u003cp\u003eA very thin, self-adhesive \u003cstrong\u003epolyethylene sponge strip, 12.5mm wide x 2mm thick\u003c\/strong\u003e, for sealing tight gaps of about \u003cstrong\u003e1.6mm to 1.7mm\u003c\/strong\u003e where there is almost no clearance: enclosure covers, instrument and equipment cases, inspection plates, light fittings, panels and trims. It also works as a low-profile anti-rattle and anti-scratch layer between parts. The foam is closed-cell and cross-linked, so it does not soak up water, and it seals with only a 15–20% squeeze. The adhesive is factory-applied to the 12.5mm face: peel the liner and press it on. Grey, supplied as one continuous 10m strip from UK stock.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 12.5mm wide x 2mm thick, flat rectangular section; adhesive on the 12.5mm face\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinnest strip in our PE range:\u003c\/strong\u003e seals a closed gap of roughly 1.6–1.7mm (15–20% compression)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosed-cell, cross-linked PE foam\u003c\/strong\u003e with a fine, even cell structure that spreads pressure and recovers after repeated closing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery wide temperature range:\u003c\/strong\u003e −60°C to +100°C in use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight and soft:\u003c\/strong\u003e 10g per metre; 33 kg\/m³ block density; cuts with scissors or a sharp knife\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValue:\u003c\/strong\u003e £14.04 per 10m strip inc VAT, which is about £1.40 per metre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin dust and splash seals on electrical, control and instrument enclosure covers\u003c\/li\u003e\n\u003cli\u003eGaskets for inspection plates, access panels, light fittings and equipment cases with very small gaps\u003c\/li\u003e\n\u003cli\u003eLow-profile door and window seals in vehicles, boats, caravans and transport where clearance is tight\u003c\/li\u003e\n\u003cli\u003eAnti-rattle, anti-squeak and anti-scratch layer between panels, trims, glass and brackets\u003c\/li\u003e\n\u003cli\u003eThin cushioning and lining strips for case inserts and packaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/polyethylene-sponge-strip-12-5mm-x-2mm-technical-drawing.png?v=1795309150\" alt=\"Branded technical drawing of the 12.5 x 2 mm polyethylene sponge strip cross-section: 12.5 mm adhesive face, 2 mm thickness, grey closed-cell PE foam\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNominal dimensions in mm, free state before compression, drawn at true proportion (6.25 : 1). The 2mm thickness is the foam only; the adhesive and liner sit under the 12.5mm face.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eHow it seals\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/polyethylene-sponge-strip-12-5mm-x-2mm-fitted-1-65mm-gap.png?v=1795309150\" alt=\"Illustration: to-scale section of the 12.5 x 2 mm PE sponge strip on a steel flange, compressed to about 1.65 mm when the cover closes\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eStick the strip flat on the frame or flange with the 12.5mm face down. When the cover or door closes, the foam is squeezed by 15–20% (from 2mm to about 1.6–1.7mm), which is enough for a dust, air and splash seal. Because this strip is so thin, it suits flat, rigid, well-fitting parts; if the gap varies along its length, choose a thicker strip.\u003c\/p\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003cp\u003eMeasure the gap between the frame and the closed cover or door (feeler gauges or a stack of paper). Pick a strip about 20–25% thicker than the gap. If the gap varies, go thicker.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eStrip\u003c\/th\u003e\n\u003cth\u003eWidth x thickness\u003c\/th\u003e\n\u003cth\u003eSeals a gap of about\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePE sponge strip 12.5 x 2mm (this item)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12.5 x 2mm\u003c\/td\u003e\n\u003ctd\u003e1.6–1.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/polyethylene-sponge-strip-10mm-x-3mm-10m-roll\"\u003ePE sponge strip 10 x 3mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10 x 3mm\u003c\/td\u003e\n\u003ctd\u003e2.4–2.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/grey-polyethylene-sponge-strip-19mm-x-3mm-10m-roll\"\u003ePE sponge strip 19 x 3mm (wider face)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e19 x 3mm\u003c\/td\u003e\n\u003ctd\u003e2.4–2.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/polyethylene-sponge-strip-10mm-x-4mm-10m-roll\"\u003ePE sponge strip 10 x 4mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10 x 4mm\u003c\/td\u003e\n\u003ctd\u003e3.2–3.4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/polyethylene-sponge-strip-10mm-x-6mm-self-adhesive-10m-roll\"\u003ePE sponge strip 10 x 6mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10 x 6mm\u003c\/td\u003e\n\u003ctd\u003e4.8–5.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eGap figures are worked out from each strip's thickness and the 15–20% sealing compression.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ source\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eProfile and dimensions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eFlat rectangular foam strip, self-adhesive one face\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth (adhesive face)\u003c\/td\u003e\n\u003ctd\u003e12.5 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, manufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness (foam only)\u003c\/td\u003e\n\u003ctd\u003e2 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, manufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdhesive position\u003c\/td\u003e\n\u003ctd\u003eOn the 12.5 mm (widest) face, with peel-off liner\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e10 m continuous strip\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.01 kg\/m (about 0.1 kg per 10 m strip)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended closed gap\u003c\/td\u003e\n\u003ctd\u003e≈ 1.6–1.7 mm\u003c\/td\u003e\n\u003ctd\u003eDerived from 2 mm and 15–20% compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer for this profile\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCellular polyethylene (PE)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCell structure\u003c\/td\u003e\n\u003ctd\u003eClosed cell, cross-linked, fine and uniform\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (block)\u003c\/td\u003e\n\u003ctd\u003e33 kg\/m³\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (range)\u003c\/td\u003e\n\u003ctd\u003e28–38 kg\/m³\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eNot stated for this foam (soft, low-density)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMechanical properties\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 250 kPa (\u0026gt; 0.25 MPa)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 170 %\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressive strength at 10% deflection\u003c\/td\u003e\n\u003ctd\u003e35–55 kPa\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressive strength at 25% deflection\u003c\/td\u003e\n\u003ctd\u003e55–85 kPa\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressive strength at 50% deflection\u003c\/td\u003e\n\u003ctd\u003e120–170 kPa\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set, 22 h at 23 °C\u003c\/td\u003e\n\u003ctd\u003e15 %\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003eNot stated for this product\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression needed to seal\u003c\/td\u003e\n\u003ctd\u003e15–20 %\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eEnvironment\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e−60 °C to +100 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eNo figure given for this size; closed-cell structure resists water uptake\u003c\/td\u003e\n\u003ctd\u003eManufacturer data (descriptive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThe strip is closed-cell, cross-linked polyethylene foam with a pressure-sensitive adhesive backing. The manufacturer does not state any product approvals (for example food contact, fire rating, REACH or RoHS) for this strip, so we do not claim any. If you need a declaration for your application, \u003ca href=\"\/pages\/contact\"\u003eask us\u003c\/a\u003e before ordering and we will check what is available.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface with isopropyl alcohol or a degreaser and let it dry. Fit above about +10°C if you can, since the adhesive grabs better when warm.\u003c\/li\u003e\n\u003cli\u003ePeel back a short length of liner at a time and press the strip down as you go. Do not stretch it: at 2mm thick it shows any stretching as gaps when it creeps back.\u003c\/li\u003e\n\u003cli\u003eRun a thumb or roller along the full length to bed the adhesive in. The bond gets stronger over the first day.\u003c\/li\u003e\n\u003cli\u003eAt corners, bend the strip round a gentle radius or cut and butt the ends tightly together; for a sharp corner, cut a 45° mitre.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat gap does this strip seal?\u003c\/strong\u003e\u003cbr\u003eAbout 1.6mm to 1.7mm when closed. It only needs a 15–20% squeeze to seal. A gap of 2mm or more will not seal; choose the 10 x 3mm or 19 x 3mm strip instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich face is the adhesive on?\u003c\/strong\u003e\u003cbr\u003eThe 12.5mm (wide) face, so the strip lies flat and stands just 2mm proud of the surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it where it gets wet or cold?\u003c\/strong\u003e\u003cbr\u003eYes. The closed cells resist water uptake and the foam works from −60°C to +100°C. For long-term outdoor exposure to strong sun, check it at intervals, as with any PE foam.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eScissors or a sharp knife cut it cleanly. Join lengths by butting the ends tightly together; on a seal, put the joint where the cover presses hardest, not at a corner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stick to painted metal, plastic, glass or wood?\u003c\/strong\u003e\u003cbr\u003eYes, to most clean, dry, rigid surfaces, smooth or slightly rough. Very low-energy plastics (some PP and PE mouldings) and dusty or oily surfaces stick less well. Clean and test a short piece first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it good for rattles and scratches?\u003c\/strong\u003e\u003cbr\u003eYes. It is soft (35–55 kPa at 10% squeeze) and recovers well (15% compression set), so it makes a thin anti-rattle and anti-scratch layer between panels, trims, glass and brackets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I get?\u003c\/strong\u003e\u003cbr\u003eOne continuous 10m strip, about 0.1kg. A 600 x 400mm cover has a 2m perimeter, so one strip seals five covers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it in stock?\u003c\/strong\u003e\u003cbr\u003eYes. It is held in stock in the UK and ships from our warehouse.\u003c\/p\u003e\n\u003cp\u003eNeed help choosing a size or a material? Contact \u003ca href=\"\/pages\/contact\"\u003eour team\u003c\/a\u003e on +44 1282 277786 or sales@industrial-polymers.co.uk.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"10 m strip","offer_id":56592167141755,"sku":"IP-PES-12.5X2-10M","price":14.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/polyethylene-sponge-strip-12-5mm-x-2mm-grey-render.png?v=1795309150","url":"https:\/\/industrial-polymers.co.uk\/products\/polyethylene-sponge-strip-12-5mm-x-2mm-self-adhesive-10m-roll","provider":"Industrial-polymers ","version":"1.0","type":"link"}