{"product_id":"polyethylene-sponge-strip-16mm-x-10mm-10m-roll","title":"Polyethylene Sponge Strip – 16mm x 10mm, Self-Adhesive – Closed-Cell PE Foam, Grey – 10m Roll","description":"\u003cp\u003eA chunky, self-adhesive \u003cstrong\u003epolyethylene sponge strip, 16mm wide x 10mm thick\u003c\/strong\u003e, for sealing gaps of about \u003cstrong\u003e8mm to 8.5mm\u003c\/strong\u003e on cabinet and enclosure doors, hatches, lids, vehicle and caravan lockers, sheds and equipment cases, and for cushioning and anti-vibration pads where a soft, deep strip is needed. The foam is closed-cell and cross-linked, so it does not soak up water, and it seals with only a 15–20% squeeze. The adhesive is factory-applied to the 16mm face: peel the liner, press it on, done. Grey, supplied as one continuous 10m strip from UK stock.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 16mm wide x 10mm thick, flat rectangular section; adhesive on the 16mm face\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeals at 15–20% compression\u003c\/strong\u003e, so a closed gap of roughly 8.0–8.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosed-cell, cross-linked PE foam:\u003c\/strong\u003e under 1% water absorption over 7 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery wide temperature range:\u003c\/strong\u003e −60°C to +100°C in use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight and soft:\u003c\/strong\u003e 33 kg\/m³ block density; cuts with scissors or a sharp knife\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValue:\u003c\/strong\u003e £39.21 per 10m strip inc VAT, which is about £3.92 per metre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDust, draught and splash seals on electrical, control and instrument enclosure doors with a wider gap\u003c\/li\u003e\n\u003cli\u003eDoor, hatch and locker seals on cabinets, sheds, vehicles, caravans and boats\u003c\/li\u003e\n\u003cli\u003eGaskets for covers, inspection plates and equipment cases\u003c\/li\u003e\n\u003cli\u003eVibration isolation and anti-rattle pads between panels, trims, tanks and brackets\u003c\/li\u003e\n\u003cli\u003eShock-absorbing cushions, edge buffers and case inserts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/polyethylene-sponge-strip-16mm-x-10mm-technical-drawing.png?v=1795314550\" alt=\"Branded technical drawing of the 16 x 10 mm polyethylene sponge strip cross-section: 16 mm adhesive face, 10 mm thickness, grey closed-cell PE foam\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNominal dimensions in mm, free state before compression. The 10mm thickness is the foam only; the adhesive and liner sit under the 16mm face.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eHow it seals\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/polyethylene-sponge-strip-16mm-x-10mm-fitted-8mm-gap.png?v=1795314551\" alt=\"Illustration: to-scale section of the 16 x 10 mm PE sponge strip on a steel door frame, compressed to about 8.25 mm when the door closes\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eStick the strip flat on the frame or flange with the 16mm face down. When the door or lid closes, the foam is squeezed by 15–20% (from 10mm to about 8.0–8.5mm), which is enough for an air- and watertight seal. Because the cells are fine and even, the pressure spreads along the strip and the foam recovers after repeated closing and knocks.\u003c\/p\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003cp\u003eMeasure the gap between the frame and the closed door or lid (feeler gauges, or a stack of card). Pick a strip about 20–25% thicker than the gap. If the gap varies along its length, go thicker.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eStrip\u003c\/th\u003e\n\u003cth\u003eWidth x thickness\u003c\/th\u003e\n\u003cth\u003eSeals a gap of about\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/polyethylene-sponge-strip-10mm-x-6mm-self-adhesive-10m-roll\"\u003ePE sponge strip 10 x 6mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10 x 6mm\u003c\/td\u003e\n\u003ctd\u003e4.8–5.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/polyethylene-sponge-strip-25mm-x-6mm-10m-roll\"\u003ePE sponge strip 25 x 6mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e25 x 6mm\u003c\/td\u003e\n\u003ctd\u003e4.8–5.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePE sponge strip 16 x 10mm (this item)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16 x 10mm\u003c\/td\u003e\n\u003ctd\u003e8.0–8.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/polyethylene-sponge-strip-19mm-x-12mm-10m-roll\"\u003ePE sponge strip 19 x 12mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e19 x 12mm\u003c\/td\u003e\n\u003ctd\u003e9.6–10.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/polyethylene-sponge-strip-25mm-x-12mm-10m-roll\"\u003ePE sponge strip 25 x 12mm (wider)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e25 x 12mm\u003c\/td\u003e\n\u003ctd\u003e9.6–10.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eGap figures are worked out from each strip's thickness and the 15–20% sealing compression.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ source\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eProfile and dimensions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eFlat rectangular foam strip, self-adhesive one face\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth (adhesive face)\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, manufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness (foam only)\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, manufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdhesive position\u003c\/td\u003e\n\u003ctd\u003eOn the 16 mm (widest) face, with peel-off liner\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e10 m continuous strip\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.01 kg\/m as stated by the manufacturer (about 0.1 kg per 10 m strip)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended closed gap\u003c\/td\u003e\n\u003ctd\u003e≈ 8.0–8.5 mm\u003c\/td\u003e\n\u003ctd\u003eDerived from 10 mm and 15–20% compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer for this profile\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCellular polyethylene (PE)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCell structure\u003c\/td\u003e\n\u003ctd\u003eClosed cell, cross-linked, fine and uniform\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (block)\u003c\/td\u003e\n\u003ctd\u003e33 kg\/m³\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (range)\u003c\/td\u003e\n\u003ctd\u003e28–38 kg\/m³\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eNot stated for this foam (soft, low-density)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMechanical properties\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 250 kPa (\u0026gt; 0.25 MPa)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 170 %\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressive strength at 10% deflection\u003c\/td\u003e\n\u003ctd\u003e35–55 kPa\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressive strength at 25% deflection\u003c\/td\u003e\n\u003ctd\u003e55–85 kPa\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressive strength at 50% deflection\u003c\/td\u003e\n\u003ctd\u003e120–170 kPa\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set, 22 h at 23 °C\u003c\/td\u003e\n\u003ctd\u003e15 %\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003eNot stated for this product\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression needed to seal\u003c\/td\u003e\n\u003ctd\u003e15–20 %\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eEnvironment\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e−60 °C to +100 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption, 7 days\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 1 %\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThe strip is closed-cell, cross-linked polyethylene foam with a pressure-sensitive adhesive backing. The manufacturer does not state any product approvals (for example food contact, fire rating, REACH or RoHS) for this strip, so we do not claim any. If you need a declaration for your application, \u003ca href=\"\/pages\/contact\"\u003eask us\u003c\/a\u003e before ordering and we will check what is available.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface with isopropyl alcohol or a degreaser and let it dry. Fit above about +10°C if you can, since the adhesive grabs better when warm.\u003c\/li\u003e\n\u003cli\u003ePeel back a short length of liner at a time and press the strip down as you go. Do not stretch it, or it will creep back and leave gaps.\u003c\/li\u003e\n\u003cli\u003eRun a thumb or roller along the full length to bed the adhesive in. The bond gets stronger over the first day.\u003c\/li\u003e\n\u003cli\u003eAt 10mm deep this strip does not bend tightly: cut and butt the ends at corners, or cut a 45° mitre for a neat square corner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat gap does this strip seal?\u003c\/strong\u003e\u003cbr\u003eAbout 8.0mm to 8.5mm when closed. It only needs a 15–20% squeeze to seal. A tighter gap still works but the door needs more force to close; a gap close to or over 10mm will not seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich face is the adhesive on?\u003c\/strong\u003e\u003cbr\u003eThe 16mm (wide) face, so the strip lies flat and stands 10mm proud of the surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it outdoors or where it gets wet?\u003c\/strong\u003e\u003cbr\u003eYes. The closed cells absorb less than 1% water over 7 days and the foam works from −60°C to +100°C. For long-term outdoor exposure to strong sun, check it at intervals, as with any PE foam.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eScissors or a sharp knife cut it cleanly. Join lengths by butting the ends tightly together; on a seal, put the joint where the door or lid presses hardest, not at a corner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stick to painted metal, plastic or wood?\u003c\/strong\u003e\u003cbr\u003eYes, to most clean, dry, rigid surfaces, smooth or slightly rough. Very low-energy plastics (some PP and PE mouldings) and dusty or oily surfaces stick less well. Clean and test a short piece first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it good for vibration and cushioning?\u003c\/strong\u003e\u003cbr\u003eYes. It is soft (35–55 kPa at 10% squeeze) and recovers well (15% compression set), and the 10mm depth gives plenty of travel, so it works as an anti-rattle pad, buffer or case insert.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I get?\u003c\/strong\u003e\u003cbr\u003eOne continuous 10m strip. Order several strips for longer runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it in stock?\u003c\/strong\u003e\u003cbr\u003eYes. It is held in stock in the UK and ships from our warehouse.\u003c\/p\u003e\n\u003cp\u003eNeed help choosing a size or a material? Contact \u003ca href=\"\/pages\/contact\"\u003eour team\u003c\/a\u003e on +44 1282 277786 or sales@industrial-polymers.co.uk.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"10 m strip","offer_id":56592162816379,"sku":"IP-PES-16X10-10M","price":39.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/polyethylene-sponge-strip-16mm-x-10mm-grey-render.png?v=1795314551","url":"https:\/\/industrial-polymers.co.uk\/products\/polyethylene-sponge-strip-16mm-x-10mm-10m-roll","provider":"Industrial-polymers ","version":"1.0","type":"link"}