{"product_id":"polyethylene-sponge-strip-19mm-x-12mm-10m-roll","title":"Polyethylene Sponge Strip – 19mm x 12mm, Self-Adhesive – Closed-Cell PE Foam, Grey – 10m Roll","description":"\u003cp\u003eA thick, soft, self-adhesive \u003cstrong\u003epolyethylene sponge strip, 19mm wide x 12mm thick\u003c\/strong\u003e, for sealing and cushioning larger gaps of about \u003cstrong\u003e10mm\u003c\/strong\u003e: equipment and enclosure doors, lids, hatches, cabinet and locker doors, vehicle, trailer and boat panels, and machine guards. It is also a good shock-absorbing bumper and anti-vibration pad. The foam is closed-cell and cross-linked, so it does not soak up water, and it seals with only a 15–20% squeeze. The adhesive is factory-applied to the 19mm face: peel the liner and press it on. Grey, supplied as one continuous 10m strip from UK stock.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 19mm wide x 12mm thick, flat rectangular section; adhesive on the 19mm face\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeals a closed gap of roughly 9.6–10.2mm\u003c\/strong\u003e (15–20% compression)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosed-cell, cross-linked PE foam\u003c\/strong\u003e with a fine, even cell structure that spreads pressure and recovers after repeated impacts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery wide temperature range:\u003c\/strong\u003e −60°C to +100°C in use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight and soft:\u003c\/strong\u003e 20g per metre; 33 kg\/m³ block density; cuts with scissors or a sharp knife\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValue:\u003c\/strong\u003e £47.37 per 10m strip inc VAT, which is about £4.74 per metre\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDust, air and splash seals on cabinet, enclosure, locker and hatch doors with a 10mm closing gap\u003c\/li\u003e\n\u003cli\u003eDoor, lid and window seals in vehicles, trailers, horseboxes, boats, caravans and transport bodies\u003c\/li\u003e\n\u003cli\u003eShock-absorbing bumpers and door stops on lids, hatches and machine guards\u003c\/li\u003e\n\u003cli\u003eVibration isolators and anti-rattle pads under panels, covers and equipment\u003c\/li\u003e\n\u003cli\u003eCushioning and lining strips for case inserts, packing and tool cases\u003c\/li\u003e\n\u003cli\u003eGeneral cut-to-length gaskets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/polyethylene-sponge-strip-19mm-x-12mm-technical-drawing.png?v=1795315446\" alt=\"Branded technical drawing of the 19 x 12 mm polyethylene sponge strip cross-section: 19 mm adhesive face, 12 mm thickness, grey closed-cell PE foam\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eNominal dimensions in mm, free state before compression, drawn at true proportion (1.58 : 1). The 12mm thickness is the foam only; the adhesive and liner sit under the 19mm face.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eHow it seals\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/polyethylene-sponge-strip-19mm-x-12mm-fitted-10mm-gap.png?v=1795315446\" alt=\"Illustration: to-scale section of the 19 x 12 mm PE sponge strip on a frame, compressed to about 10 mm when the door closes\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\u003cp\u003eStick the strip flat on the frame or flange with the 19mm face down. When the door or lid closes, the foam is squeezed by 15–20% (from 12mm to about 9.6–10.2mm), which is enough for a dust, air and splash seal. The wide 19mm face gives a large bonding area, so the strip stays put on frames that are slightly uneven.\u003c\/p\u003e\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\u003cp\u003eMeasure the gap between the frame and the closed door or lid (a stack of coins, a rule or a ball of putty pressed shut). Pick a strip about 20–25% thicker than the gap. If the gap varies, size for the largest gap and check the door still closes easily.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eStrip\u003c\/th\u003e\n\u003cth\u003eWidth x thickness\u003c\/th\u003e\n\u003cth\u003eSeals a gap of about\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/polyethylene-sponge-strip-10mm-x-6mm-self-adhesive-10m-roll\"\u003ePE sponge strip 10 x 6mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10 x 6mm\u003c\/td\u003e\n\u003ctd\u003e4.8–5.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/polyethylene-sponge-strip-25mm-x-6mm-10m-roll\"\u003ePE sponge strip 25 x 6mm (wider face)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e25 x 6mm\u003c\/td\u003e\n\u003ctd\u003e4.8–5.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/polyethylene-sponge-strip-50mm-x-8mm-10m-roll\"\u003ePE sponge strip 50 x 8mm (very wide)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e50 x 8mm\u003c\/td\u003e\n\u003ctd\u003e6.4–6.8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/polyethylene-sponge-strip-16mm-x-10mm-10m-roll\"\u003ePE sponge strip 16 x 10mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e16 x 10mm\u003c\/td\u003e\n\u003ctd\u003e8.0–8.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePE sponge strip 19 x 12mm (this item)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e19 x 12mm\u003c\/td\u003e\n\u003ctd\u003e9.6–10.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/polyethylene-sponge-strip-25mm-x-12mm-10m-roll\"\u003ePE sponge strip 25 x 12mm (wider face)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e25 x 12mm\u003c\/td\u003e\n\u003ctd\u003e9.6–10.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eGap figures are worked out from each strip's thickness and the 15–20% sealing compression.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ source\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eProfile and dimensions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eFlat rectangular foam strip, self-adhesive one face\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth (adhesive face)\u003c\/td\u003e\n\u003ctd\u003e19 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, manufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness (foam only)\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, manufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth-to-thickness ratio\u003c\/td\u003e\n\u003ctd\u003e1.58 : 1\u003c\/td\u003e\n\u003ctd\u003eCalculated from nominal sizes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdhesive position\u003c\/td\u003e\n\u003ctd\u003eOn the 19 mm (widest) face, with peel-off liner\u003c\/td\u003e\n\u003ctd\u003eManufacturer data and drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e10 m continuous strip\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.02 kg\/m (about 0.2 kg per 10 m strip)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended closed gap\u003c\/td\u003e\n\u003ctd\u003e≈ 9.6–10.2 mm\u003c\/td\u003e\n\u003ctd\u003eDerived from 12 mm and 15–20% compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer for this profile\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCellular polyethylene (PE)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCell structure\u003c\/td\u003e\n\u003ctd\u003eClosed cell, cross-linked, fine and uniform\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (block)\u003c\/td\u003e\n\u003ctd\u003e33 kg\/m³\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (range)\u003c\/td\u003e\n\u003ctd\u003e28–38 kg\/m³\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eNot stated for this foam (soft, low-density)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMechanical properties\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 250 kPa (\u0026gt; 0.25 MPa)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 170 %\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressive strength at 10% deflection\u003c\/td\u003e\n\u003ctd\u003e35–55 kPa\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressive strength at 25% deflection\u003c\/td\u003e\n\u003ctd\u003e55–85 kPa\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressive strength at 50% deflection\u003c\/td\u003e\n\u003ctd\u003e120–170 kPa\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set, 22 h at 23 °C\u003c\/td\u003e\n\u003ctd\u003e15 %\u003c\/td\u003e\n\u003ctd\u003eManufacturer data, method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003eNot stated for this product\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression needed to seal\u003c\/td\u003e\n\u003ctd\u003e15–20 %\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eEnvironment\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e−60 °C to +100 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003eNo figure given for this size; closed-cell structure resists water uptake\u003c\/td\u003e\n\u003ctd\u003eManufacturer data (descriptive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\u003cp\u003eThe strip is closed-cell, cross-linked polyethylene foam with a pressure-sensitive adhesive backing. The manufacturer does not state any product approvals (for example food contact, fire rating, REACH or RoHS) for this strip, so we do not claim any. If you need a declaration for your application, \u003ca href=\"\/pages\/contact\"\u003eask us\u003c\/a\u003e before ordering and we will check what is available.\u003c\/p\u003e\u003ch3\u003eFitting tips\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClean the surface with isopropyl alcohol or a degreaser and let it dry. Fit above about +10°C if you can, since the adhesive grabs better when warm.\u003c\/li\u003e\n\u003cli\u003ePeel back a short length of liner at a time and press the strip down as you go. Do not stretch it, or it will shrink back and open gaps at the ends.\u003c\/li\u003e\n\u003cli\u003ePress firmly along the full length to bed the adhesive in. The bond gets stronger over the first day; leave it a few hours before closing a tight door on it.\u003c\/li\u003e\n\u003cli\u003eAt 12mm thick the strip will not bend round a tight corner on its 19mm face: cut and butt the ends, or cut a 45° mitre for a neat square corner.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat gap does this strip seal?\u003c\/strong\u003e\u003cbr\u003eAbout 9.6mm to 10.2mm when closed. It only needs a 15–20% squeeze to seal. For a gap of about 8mm choose the 16 x 10mm strip; for 5mm, the 10 x 6mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich face is the adhesive on?\u003c\/strong\u003e\u003cbr\u003eThe 19mm (wide) face, so the strip lies flat and stands 12mm proud of the surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use it outdoors, in the wet or in the cold?\u003c\/strong\u003e\u003cbr\u003eYes. The closed cells resist water uptake and the foam works from −60°C to +100°C. For long-term outdoor exposure to strong sun, check it at intervals, as with any PE foam.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eScissors or a sharp knife cut it cleanly; a long blade gives the squarest cut at 12mm thick. Join lengths by butting the ends tightly together; on a seal, put the joint along a straight run where the door presses hardest, not at a corner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it stick to painted metal, plastic, glass or wood?\u003c\/strong\u003e\u003cbr\u003eYes, to most clean, dry, rigid surfaces, smooth or slightly rough. Very low-energy plastics (some PP and PE mouldings) and dusty or oily surfaces stick less well. Clean and test a short piece first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it stop knocks and vibration?\u003c\/strong\u003e\u003cbr\u003eYes. It is soft (35–55 kPa at 10% squeeze), so it gives easily on contact, and it recovers well (15% compression set after 22 hours), so it keeps cushioning after repeated knocks. That suits door bumpers, lid stops and anti-vibration pads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much do I get?\u003c\/strong\u003e\u003cbr\u003eOne continuous 10m strip, about 0.2kg. A 1000 x 600mm cabinet door has a 3.2m perimeter, so one strip seals three such doors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it in stock?\u003c\/strong\u003e\u003cbr\u003eYes. It is held in stock in the UK and ships from our warehouse.\u003c\/p\u003e\u003cp\u003eNeed help choosing a size or a material? Contact \u003ca href=\"\/pages\/contact\"\u003eour team\u003c\/a\u003e on +44 1282 277786 or sales@industrial-polymers.co.uk.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"10 m strip","offer_id":56592162750843,"sku":"IP-PES-19X12-10M","price":47.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/polyethylene-sponge-strip-19mm-x-12mm-10m-roll-detail.jpg?v=1795119392","url":"https:\/\/industrial-polymers.co.uk\/products\/polyethylene-sponge-strip-19mm-x-12mm-10m-roll","provider":"Industrial-polymers ","version":"1.0","type":"link"}