{"product_id":"rubber-epdm-p-extrusion-with-hollow-bead-for-door-and-window-seals-15mm-x-6mm","title":"EPDM P-Section Extrusion – 15mm x 6mm Hollow Bead, Black – 16m to 30m Lengths","description":"\u003cp\u003e\u003cstrong\u003eA neat black EPDM rubber P-section: a hollow 6 mm sealing bead on a flat 2 mm flange, 15 mm wide overall, cut to the length you choose from 16 m to a full 30 m coil.\u003c\/strong\u003e Fix the flange to a frame, rebate or panel edge and the hollow bead squeezes down when a door, hatch or lid closes on it, closing the gap against draughts, rain, dust and rattles. Solid (dense) EPDM shrugs off sunlight, ozone and weather, so it works just as well outside as in.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 15 mm wide × 6 mm high; Ø6 mm hollow bead plus a 9 mm × 2 mm fixing flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e solid (dense, not sponge) EPDM rubber, 65–75 IRHD (about 65–75 Shore A), black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeals gaps:\u003c\/strong\u003e best on closed gaps of about 4 to 5 mm (our guidance)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e −40 °C to +90 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoors:\u003c\/strong\u003e no cracking in a 72-hour ozone test; good UV and weather resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing:\u003c\/strong\u003e contact adhesive, instant adhesive or screws, rivets or staples through the flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e one continuous length from 16 m to 30 m. The full 30 m coil is the best value at £8.76 per metre inc VAT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStock:\u003c\/strong\u003e held in stock in the UK and dispatched from stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDoor, hatch and locker seals on vans, trailers, horseboxes, buses and rail interiors\u003c\/li\u003e\n\u003cli\u003eWeather seals on boat hatches, lockers and cabin doors\u003c\/li\u003e\n\u003cli\u003eDraught and dust seals on cabinet doors, enclosures, machine guards and access panels\u003c\/li\u003e\n\u003cli\u003eWindow and glazing-frame seals on sheds, workshops, garden rooms and kiosks\u003c\/li\u003e\n\u003cli\u003eEdge trim and anti-rattle buffer between metal, timber and plastic panels\u003c\/li\u003e\n\u003cli\u003eLight impact strip on the edges of lids, flaps and trolleys\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-p-section-extrusion-15mm-x-6mm-technical-drawing.png?v=1795310225\" alt=\"Technical drawing of the EPDM P-section: 15 mm overall width, 6 mm diameter hollow bead, 9 mm free flange, 2 mm flange thickness, bore about 3 mm\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProperty\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eTest method \/ basis\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eP-section: round hollow bead with a flat side flange\u003c\/td\u003e\n\u003ctd\u003eManufacturer's profile drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (bead edge to flange tip)\u003c\/td\u003e\n\u003ctd\u003e15.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, manufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height (bead diameter)\u003c\/td\u003e\n\u003ctd\u003eØ6.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, manufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree flange length (beyond the bead)\u003c\/td\u003e\n\u003ctd\u003e9.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, manufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlange thickness\u003c\/td\u003e\n\u003ctd\u003e2.0 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, manufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHollow bore \/ bead wall\u003c\/td\u003e\n\u003ctd\u003eAbout Ø3 mm \/ about 1.5 mm\u003c\/td\u003e\n\u003ctd\u003eScaled from the manufacturer's drawing; not separately stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSolid (dense) EPDM (ethylene propylene diene monomer)\u003c\/td\u003e\n\u003ctd\u003eManufacturer product page and datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e65–75 IRHD (stated as 65°–75° Shore A on the product page)\u003c\/td\u003e\n\u003ctd\u003eIRHD; test standard not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e10 MPa\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e500%\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e50 kN\/m\u003c\/td\u003e\n\u003ctd\u003eManufacturer datasheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e21%\u003c\/td\u003e\n\u003ctd\u003e22 hours at 70 °C (manufacturer datasheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eNo cracks\u003c\/td\u003e\n\u003ctd\u003e72 hours at 40 °C, 22 pphm ozone, extended (manufacturer datasheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: hardness change\u003c\/td\u003e\n\u003ctd\u003e0 IRHD\u003c\/td\u003e\n\u003ctd\u003e70 hours at 70 °C (manufacturer datasheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: tensile change\u003c\/td\u003e\n\u003ctd\u003e+9%\u003c\/td\u003e\n\u003ctd\u003e70 hours at 70 °C (manufacturer datasheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat ageing: elongation change\u003c\/td\u003e\n\u003ctd\u003e0%\u003c\/td\u003e\n\u003ctd\u003e70 hours at 70 °C (manufacturer datasheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum service temperature\u003c\/td\u003e\n\u003ctd\u003e+90 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer product page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum service temperature\u003c\/td\u003e\n\u003ctd\u003e−40 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer product page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.057 kg per metre (about 1.71 kg for a 30 m coil)\u003c\/td\u003e\n\u003ctd\u003eManufacturer product page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile. Solid EPDM is typically about 1.1 to 1.4 g\/cm³ (typical for solid EPDM, not tested on this profile)\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer. Treat sizes as nominal; solid extrusions are commonly made to ISO 3302-1 Class E2 (typical, not stated for this profile)\u003c\/td\u003e\n\u003ctd\u003eAsk us if your fit is critical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLengths available\u003c\/td\u003e\n\u003ctd\u003e16 m to 30 m in 1 m steps, supplied in one continuous piece\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice per metre\u003c\/td\u003e\n\u003ctd\u003e£11.73\/m inc VAT on 16 m to 29 m; £8.76\/m inc VAT on the full 30 m coil\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eThe manufacturer quotes hardness as 65–75 IRHD on its data sheet and 65°–75° Shore A on its product page; for rubber in this range the two scales read very close. Rubber extrusions are flexible, so treat all sizes as nominal.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eSolid EPDM rubber, black. EPDM is valued for its resistance to weather, sunlight (UV), ozone, water and steam, and it stays flexible down to −40 °C. The manufacturer's ozone test on this compound shows no cracking, and 70 hours at 70 °C left its hardness and elongation unchanged. Like all EPDM it is not suited to petrol, diesel, mineral oils or most solvents.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer does \u003cstrong\u003enot\u003c\/strong\u003e state any food-contact (FDA, EC 1935\/2004), drinking-water (WRAS), REACH, RoHS or fire-rating approval for this profile, so we do not claim any. If your job needs a certified material, ask us before you order.\u003c\/p\u003e\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-p-section-extrusion-15mm-x-6mm-fitted-door-rebate.png?v=1795310225\" alt=\"Illustration: the 15 x 6 mm EPDM P-section fixed to a door frame stop, standing 6 mm proud with the door open and squeezed to about 4 mm when the door closes\" width=\"2000\" height=\"1500\" loading=\"lazy\" style=\"width:100%;max-width:720px;height:auto\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the closed gap.\u003c\/strong\u003e It must be less than 6 mm so the bead is squeezed. About 4 to 5 mm (around 15 to 35% squeeze) is a good starting point; this is our guidance, not a manufacturer figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the landing.\u003c\/strong\u003e You need a flat face at least 15 mm wide, or a rebate the 9 mm flange can sit in, with the bead facing the closing part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and dry.\u003c\/strong\u003e Wipe the surface and the back of the flange with isopropyl alcohol and let them dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFix the flange.\u003c\/strong\u003e Use a rubber-compatible contact adhesive or instant adhesive along the flange, or screws, rivets or staples every 100 to 150 mm through the flange. Keep fixings clear of the bead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not stretch it.\u003c\/strong\u003e Lay it in relaxed; stretched rubber shrinks back over time and opens gaps at the ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorners and joins.\u003c\/strong\u003e It follows gentle curves. For a tight 90° corner, cut a V-notch in the flange or mitre and butt the ends. A spot of instant adhesive on butted ends gives a sealed join.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAdd up every edge you want to seal and allow about 5% for trimming. A standard 2 m × 0.8 m door needs about 5.6 m round the frame (three sides about 4.8 m), so a 16 m length does three doors and a 30 m coil does five. Need more than 30 m? Add two lengths to your basket, or call us for a quote on longer runs.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-p-section-extrusion-15mm-x-6mm-true-scale-render.png?v=1795310226\" alt=\"Illustration: true-proportion view of the 15 x 6 mm black EPDM P-section with its end face lined up against a millimetre rule\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:640px;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhich profile do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProfile\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSize\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEPDM P-section (this item)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e15 mm × Ø6 mm hollow bead\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eClosed gaps of about 4 to 5 mm, weather-proof, −40 to +90 °C\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/solid-rubber-epdm-p-extrusion-weather-seal-13mm-x-2-5mm-sold-per-metre\"\u003eSolid EPDM P extrusion\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e13 mm × 2.5 mm solid bead\u003c\/td\u003e\n\u003ctd\u003ePiping and very small gaps, sold per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/epdm-p-profile-seal-19-5mm-tail-x-7-5mm-bulb-cut-lengths\"\u003eEPDM P profile\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e19.5 mm × 7.5 mm bulb\u003c\/td\u003e\n\u003ctd\u003eSlightly larger gaps of about 5 to 6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/black-tpe-p-profile-16mm-x-6mm-hollow-bulb-25m-coil\"\u003eTPE P profile\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e16 mm × 6 mm hollow bulb\u003c\/td\u003e\n\u003ctd\u003eSimilar size in TPE, 25 m coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/high-temperature-silicone-p-extrusion-15mm-flange-6mm-bead-10m-roll\"\u003eHigh-temperature silicone P extrusion\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e15 mm × 6 mm hollow bead\u003c\/td\u003e\n\u003ctd\u003eSame shape for ovens, dryers and hot equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eData sheet\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/epdm-p-section-extrusion-15mm-x-6mm-data-sheet.pdf?v=1795310226\" target=\"_blank\" rel=\"noopener\"\u003eDownload the technical data sheet (PDF): drawing, full specification and compliance\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat gap will it seal?\u003c\/strong\u003e\u003cbr\u003eAny closed gap under its 6 mm bead height. Aim for about 4 to 5 mm so the hollow bead is squeezed but not flattened. For bigger gaps choose the 19.5 × 7.5 mm P profile.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I fix it?\u003c\/strong\u003e\u003cbr\u003eIt has no self-adhesive tape. Bond the 9 mm flange with a contact or instant adhesive suitable for EPDM, or fix it mechanically with screws, rivets or staples through the flange. Clean surfaces first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich way round does it go?\u003c\/strong\u003e\u003cbr\u003eThe flange goes against the frame, rebate or panel and the round bead faces the door, hatch or lid that closes on it. In a rebate, tuck the flange in and leave the bead standing proud.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eSharp scissors, a craft knife or a rubber cutter gives a clean square end. Butt joins tightly and glue the ends with instant adhesive for a sealed join; mitre the ends at corners.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer rates it from −40 °C to +90 °C. For hotter jobs such as ovens and dryers, use the silicone P extrusion of the same size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. Solid EPDM has very good UV, ozone and weather resistance; this compound showed no cracks in a 72-hour ozone test.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stand up to oil or fuel?\u003c\/strong\u003e\u003cbr\u003eNo. EPDM handles water, steam, weather and many dilute chemicals well, but swells in oils, fuels and most solvents. Ask us for a neoprene or nitrile alternative.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it sponge or solid rubber?\u003c\/strong\u003e\u003cbr\u003eSolid (dense) rubber at 65–75 IRHD. The bead is hollow, which lets it compress easily, but the rubber itself is not foam, so it is tougher and more hard-wearing than a sponge seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is the 30 m coil cheaper than 29 m?\u003c\/strong\u003e\u003cbr\u003eLengths of 16 to 29 m are cut from a coil to order; 30 m is a full uncut coil, so we pass the saving on. If you need more than about 22 m, the full coil costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food-safe or WRAS approved?\u003c\/strong\u003e\u003cbr\u003eNo approvals are stated for this profile, so do not use it where certified food-contact or drinking-water material is required.\u003c\/p\u003e\n\u003ch3\u003eDelivery and help\u003c\/h3\u003e\n\u003cp\u003eHeld in stock and dispatched from the UK. Trade and quantity orders welcome. Not sure it is the right profile? Call +44 1282 277786 or email sales@industrial-polymers.co.uk and we will check it for you.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"16m","offer_id":56592670425467,"sku":"IP-EPDMP-15X6-16","price":187.71,"currency_code":"GBP","in_stock":true},{"title":"17m","offer_id":56592670458235,"sku":"IP-EPDMP-15X6-17","price":199.44,"currency_code":"GBP","in_stock":true},{"title":"18m","offer_id":56592670491003,"sku":"IP-EPDMP-15X6-18","price":211.17,"currency_code":"GBP","in_stock":true},{"title":"19m","offer_id":56592670523771,"sku":"IP-EPDMP-15X6-19","price":222.9,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":56592670556539,"sku":"IP-EPDMP-15X6-20","price":234.63,"currency_code":"GBP","in_stock":true},{"title":"21m","offer_id":56592670589307,"sku":"IP-EPDMP-15X6-21","price":246.36,"currency_code":"GBP","in_stock":true},{"title":"22m","offer_id":56592670622075,"sku":"IP-EPDMP-15X6-22","price":258.09,"currency_code":"GBP","in_stock":true},{"title":"23m","offer_id":56592670654843,"sku":"IP-EPDMP-15X6-23","price":269.82,"currency_code":"GBP","in_stock":true},{"title":"24m","offer_id":56592670687611,"sku":"IP-EPDMP-15X6-24","price":281.55,"currency_code":"GBP","in_stock":true},{"title":"25m","offer_id":56592670720379,"sku":"IP-EPDMP-15X6-25","price":293.28,"currency_code":"GBP","in_stock":true},{"title":"26m","offer_id":56592670753147,"sku":"IP-EPDMP-15X6-26","price":305.01,"currency_code":"GBP","in_stock":true},{"title":"27m","offer_id":56592670785915,"sku":"IP-EPDMP-15X6-27","price":316.74,"currency_code":"GBP","in_stock":true},{"title":"28m","offer_id":56592670818683,"sku":"IP-EPDMP-15X6-28","price":328.47,"currency_code":"GBP","in_stock":true},{"title":"29m","offer_id":56592670851451,"sku":"IP-EPDMP-15X6-29","price":340.2,"currency_code":"GBP","in_stock":true},{"title":"30m","offer_id":56592670884219,"sku":"IP-EPDMP-15X6-30","price":262.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/rubber-epdm-p-extrusion-with-hollow-bead-for-door-and-window-studio.jpg?v=1795167702","url":"https:\/\/industrial-polymers.co.uk\/products\/rubber-epdm-p-extrusion-with-hollow-bead-for-door-and-window-seals-15mm-x-6mm","provider":"Industrial-polymers ","version":"1.0","type":"link"}