{"product_id":"self-grip-door-seal-epdm-rubber-and-sponge-13-4mm-x-11mm-per-metre","title":"Self-Grip Door Seal with Sponge Side Bulb – 13.4mm x 11mm – EPDM, Fits 1-2mm Panels – 10m to 100m","description":"\u003cp\u003e\u003cstrong\u003eA push-on door and hatch seal for 1 mm to 2 mm panel edges: a solid EPDM grip with a steel wire carrier, plus a soft EPDM sponge bulb on the side.\u003c\/strong\u003e The seal is 13.4 mm wide and 11 mm high. The grip is 7.6 mm wide, with a 2.2 mm mouth, and holds the panel edge with an internal fin and the steel carrier, so no glue is needed. The closed-cell sponge bulb, about 5.8 mm wide, sits against the frame or the opposite door when it closes and keeps out water, dust, draughts and noise. Choose any length from 10 m to 49 m in one continuous piece, a full 50 m coil, or longer runs up to 100 m. It is in stock in the UK for same-day dispatch.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e sheet metal, aluminium, GRP and plastic door, hatch and panel edges from 1 mm to 2 mm thick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 13.4 mm overall width × 11 mm height. The grip is 7.6 mm wide with a 2.2 mm mouth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip:\u003c\/strong\u003e solid EPDM, 70 ± 5 Shore A, with a steel wire carrier and one angled internal fin. It pushes on by hand, with no adhesive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal:\u003c\/strong\u003e closed-cell EPDM sponge bulb with 0.6 g\/cm³ density and 0.98 % water absorption. Aim for 30 % to 40 % squeeze and never more than 50 %.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking temperature:\u003c\/strong\u003e −40 °C to +70 °C, indoors or outdoors, with good resistance to UV, ozone and weathering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.11 kg per metre\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLengths:\u003c\/strong\u003e 10 m to 49 m at £7.98 per metre, a 50 m coil for £267.00 (£5.34 per metre), and up to 100 m for £504.00 (£5.04 per metre)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/self-grip-door-seal-13-4x11mm-technical-drawing.png?v=1795310791\" alt=\"Technical drawing of the self-grip door seal 13.4 x 11 mm: 13.4 mm overall width, 7.6 mm grip, 11 mm height and 2.2 mm mouth for 1 to 2 mm panels, with steel wire carrier, internal fin and EPDM sponge side bulb\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eAll dimensions are in mm and nominal. The manufacturer gives the 13.4, 7.6, 11 and 2.2 mm dimensions. The wall, fin, carrier and bulb are drawn in proportion to the manufacturer's section and have no separate tolerance.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ basis\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eDimensions and fit\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eSelf-gripping U grip with steel wire carrier and one internal fin, with a closed-cell sponge bulb on one side\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (grip + bulb)\u003c\/td\u003e\n\u003ctd\u003e13.4 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing, data sheet and product data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e11 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing, data sheet and product data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrip width\u003c\/td\u003e\n\u003ctd\u003e7.6 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMouth opening (unflexed)\u003c\/td\u003e\n\u003ctd\u003e2.2 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel thickness it fits\u003c\/td\u003e\n\u003ctd\u003e1 mm to 2 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet and product data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSponge bulb width, including the two small lips\u003c\/td\u003e\n\u003ctd\u003eAbout 5.8 mm\u003c\/td\u003e\n\u003ctd\u003eCalculated: 13.4 − 7.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended bulb compression\u003c\/td\u003e\n\u003ctd\u003e30 % to 40 % (about 1.7 mm to 2.3 mm of squeeze). The technical table gives 40 % as the maximum, and the fitting notes say never more than 50 %.\u003c\/td\u003e\n\u003ctd\u003eManufacturer product data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.11 kg per metre (about 5.5 kg for a 50 m coil)\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature (complete seal)\u003c\/td\u003e\n\u003ctd\u003e−40 °C to +70 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer product data. The sponge sets the upper limit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSolid EPDM grip (measured value, with the requirement in brackets)\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e70 to 71 Shore A (requirement 70 ± 5)\u003c\/td\u003e\n\u003ctd\u003eISO 7619-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e7.8 MPa (minimum 7.5 MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 37\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e340 % (minimum 300 %)\u003c\/td\u003e\n\u003ctd\u003eISO 37\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear resistance\u003c\/td\u003e\n\u003ctd\u003e22.18 N\/mm (minimum 8 N\/mm)\u003c\/td\u003e\n\u003ctd\u003eISO 34-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set, 22 h at 100 °C\u003c\/td\u003e\n\u003ctd\u003e23.12 % (maximum 35 %)\u003c\/td\u003e\n\u003ctd\u003eISO 815\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness change after low-temperature ageing, 168 h at −10 °C\u003c\/td\u003e\n\u003ctd\u003e+4 Shore A (maximum +10)\u003c\/td\u003e\n\u003ctd\u003eDIN 53505\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance, 72 h at 40 °C, 50 pphm\u003c\/td\u003e\n\u003ctd\u003eNo cracks\u003c\/td\u003e\n\u003ctd\u003eISO 1431-1 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV resistance\u003c\/td\u003e\n\u003ctd\u003eNo migration\u003c\/td\u003e\n\u003ctd\u003eASTM D 1148\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrittleness point, 24 h at −40 °C\u003c\/td\u003e\n\u003ctd\u003eNo cracks\u003c\/td\u003e\n\u003ctd\u003eISO 812\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature of the grip compound\u003c\/td\u003e\n\u003ctd\u003e−40 °C to +120 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarrier\u003c\/td\u003e\n\u003ctd\u003eSteel wire (metal insert), moulded into the grip for its full length\u003c\/td\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eEPDM sponge bulb\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompound\u003c\/td\u003e\n\u003ctd\u003eClosed-cell EPDM sponge\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e0.6 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eTS 2817 ISO 2781\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e2.8 MPa\u003c\/td\u003e\n\u003ctd\u003eTS ISO 37\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e140 %\u003c\/td\u003e\n\u003ctd\u003eTS ISO 37\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression deflection\u003c\/td\u003e\n\u003ctd\u003e42 kPa\u003c\/td\u003e\n\u003ctd\u003eASTM D 1056\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003e0.98 %\u003c\/td\u003e\n\u003ctd\u003eASTM D 1056\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance, 72 h at 40 °C, 50 pphm\u003c\/td\u003e\n\u003ctd\u003eNo cracking\u003c\/td\u003e\n\u003ctd\u003eISO 1431-1 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThermal conductivity\u003c\/td\u003e\n\u003ctd\u003e0.15 W\/m·K\u003c\/td\u003e\n\u003ctd\u003eASTM C 518\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecovery after ageing\u003c\/td\u003e\n\u003ctd\u003e82 %\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e−40 °C to +70 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eLengths and prices\u003c\/h3\u003e\n\u003cp\u003ePrices include VAT. Lengths from 10 m to 50 m are one continuous piece with no joins.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003cth\u003ePer metre\u003c\/th\u003e\n\u003cth\u003eSupplied as\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e10 m to 49 m (1 m steps)\u003c\/td\u003e\n\u003ctd\u003e£79.80 to £391.02\u003c\/td\u003e\n\u003ctd\u003e£7.98\u003c\/td\u003e\n\u003ctd\u003eOne continuous cut length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExamples: 10 m \/ 20 m \/ 30 m \/ 40 m\u003c\/td\u003e\n\u003ctd\u003e£79.80 \/ £159.60 \/ £239.40 \/ £319.20\u003c\/td\u003e\n\u003ctd\u003e£7.98\u003c\/td\u003e\n\u003ctd\u003eOne continuous cut length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e50 m full coil\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e£267.00\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e£5.34\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOne continuous coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60 m \/ 70 m \/ 80 m \/ 90 m\u003c\/td\u003e\n\u003ctd\u003e£320.40 \/ £373.80 \/ £427.20 \/ £480.60\u003c\/td\u003e\n\u003ctd\u003e£5.34\u003c\/td\u003e\n\u003ctd\u003eA 50 m coil plus one cut length for the rest\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e100 m\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e£504.00\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e£5.04\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo 50 m coils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e for 34 m or more, the full 50 m coil costs less than a cut length. It is priced at our 50 m+ bulk rate.\u003c\/p\u003e\n\u003cp\u003eTo work out how much you need, measure all round the door or hatch opening and add about 5 % for trimming. For example, a 900 × 2000 mm cabinet door has a 5.8 m perimeter, so eight doors need 46.4 m. With 5 % extra that is 48.7 m, so the 50 m coil is the cheaper choice.\u003c\/p\u003e\n\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/self-grip-door-seal-13-4x11mm-how-it-fits.png?v=1795310791\" alt=\"How it fits: section through the 13.4 x 11 mm self-grip door seal pushed onto a 1.5 mm door panel, with the sponge bulb facing the frame, and three fitting steps\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the edge.\u003c\/strong\u003e It should be 1 mm to 2 mm thick, deburred, clean and dry. Decide which side of the panel the frame or the other door closes against. The bulb must face that side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush on.\u003c\/strong\u003e Start in the middle of a straight run, away from a corner. Press the grip fully home by hand as you work along the edge. Do not stretch the seal as you go, because it will shrink back and leave gaps at the ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat it.\u003c\/strong\u003e Tap along the top of the grip with a rubber or plastic mallet until the panel edge reaches the bottom of the channel. Never hit the sponge bulb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the squeeze.\u003c\/strong\u003e Close the door. The bulb should be squashed by about a third (30 % to 40 %). If it is squashed flat, the gap is too small for this profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish.\u003c\/strong\u003e Cut through the rubber and carrier with side cutters or a sharp knife and snips. Butt the two ends tightly together at the bottom of the door, where they are least visible.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDoors and access hatches on control cabinets, machine enclosures, kiosks and plant rooms\u003c\/li\u003e\n\u003cli\u003eGarage, shed and workshop doors made from thin sheet steel or aluminium\u003c\/li\u003e\n\u003cli\u003eCar, van, bus and train doors, side windows, boot lids and interior side panels\u003c\/li\u003e\n\u003cli\u003eHatches and lockers on boats and marine equipment\u003c\/li\u003e\n\u003cli\u003eFurniture, display cases and glazed doors where a cushioned, quiet close is wanted\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich self-grip seal do I need?\u003c\/h3\u003e\n\u003cp\u003eMeasure the panel edge thickness and the gap the seal has to close when the door shuts. For 30 % to 40 % squeeze across this bulb, the gap should be about 3.5 mm to 4 mm. Related profiles for 1 mm to 2 mm edges:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/epdm-self-grip-door-seal-12-5mm-x-8mm-per-metre\"\u003eEPDM Self-Grip Door Seal 12.5 × 8 mm\u003c\/a\u003e: a smaller, lower profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis seal, 13.4 × 11 mm\u003c\/strong\u003e: a 5.8 mm sponge side bulb\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/epdm-self-grip-door-seal-15-5mm-x-10mm-for-1mm-to-2mm-panels-per-metre\"\u003eEPDM Self-Grip Door Seal 15.5 × 10 mm\u003c\/a\u003e: a wider side bulb for larger gaps\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/epdm-self-grip-edge-trim-7-4mm-x-9-7mm\"\u003eEPDM Self-Grip Edge Trim 7.4 × 9.7 mm\u003c\/a\u003e: the same type of grip with no bulb, for edge protection only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eBoth the grip and the bulb are EPDM, which suits outdoor doors and hatches. The manufacturer quotes excellent resistance to UV, ozone and weathering and good resistance to chemicals. EPDM handles water, steam, dilute acids and alkalis, and many cleaning products well. Like all EPDM, it is \u003cem\u003enot\u003c\/em\u003e suitable for petrol, diesel, mineral oils or greases. The steel carrier is fully enclosed in rubber except at the cut ends.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer does not state any product approvals for this seal (such as FDA, EC 1935\/2004, WRAS, REACH or RoHS), so we do not claim any. If you need a declaration for your application, contact us before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need glue to fit it?\u003c\/strong\u003e\u003cbr\u003eNo. The steel wire carrier and the internal fin clamp the grip onto the panel edge. You push it on by hand and seat it with a rubber mallet. With no adhesive, it can be pulled off and refitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat thickness of panel does it fit?\u003c\/strong\u003e\u003cbr\u003eEdges from 1 mm to 2 mm thick. On thinner edges it will not grip firmly, and thicker edges will not go fully into the 2.2 mm mouth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich way round does the bulb go?\u003c\/strong\u003e\u003cbr\u003eThe bulb goes on the side that closes against the frame, the door stop or the other door. On a cabinet door that closes onto a flange, the bulb faces the flange.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow big a gap will it seal?\u003c\/strong\u003e\u003cbr\u003eThe bulb is about 5.8 mm wide. For a lasting seal it should be squeezed by 30 % to 40 %, so it suits a closed gap of about 3.5 mm to 4 mm between the panel face and the frame. Do not squeeze it by more than 50 %, or it will take a set and stop sealing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it go round corners?\u003c\/strong\u003e\u003cbr\u003eYes. The carrier lets it follow radiused corners and curves. For a sharp 90° corner, cut a small V-notch in the base of the grip (never the bulb) so it folds round without bunching. Alternatively, cut and butt-join the seal at the corner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut it and join the ends?\u003c\/strong\u003e\u003cbr\u003eCut through the rubber and the steel wire with side cutters, or score the rubber with a sharp knife and snip the wire. Cut the ends square and butt them tightly together. If a fully sealed join is needed, a drop of cyanoacrylate rubber adhesive on the sponge faces works well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe complete seal is rated −40 °C to +70 °C. The solid grip compound itself is rated to +120 °C, but the sponge bulb sets the 70 °C limit, so keep it away from exhausts, ovens and similar heat sources.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it watertight?\u003c\/strong\u003e\u003cbr\u003eYes, when the bulb is squeezed by 30 % to 40 % all the way round. The sponge is closed-cell, with 0.98 % water absorption, so it does not soak up water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen will it arrive?\u003c\/strong\u003e\u003cbr\u003eAll lengths are held in stock in the UK and dispatched the same working day, as shown in the dispatch message on this page.\u003c\/p\u003e\n\n\u003cp\u003eIf you need help choosing a profile, call \u003cstrong\u003e+44 1282 277786\u003c\/strong\u003e or email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"10m","offer_id":56594044158331,"sku":"IP-SGDS-13.4X11-10M","price":79.8,"currency_code":"GBP","in_stock":true},{"title":"11m","offer_id":56594044191099,"sku":"IP-SGDS-13.4X11-11M","price":87.78,"currency_code":"GBP","in_stock":true},{"title":"12m","offer_id":56594044223867,"sku":"IP-SGDS-13.4X11-12M","price":95.76,"currency_code":"GBP","in_stock":true},{"title":"13m","offer_id":56594044256635,"sku":"IP-SGDS-13.4X11-13M","price":103.74,"currency_code":"GBP","in_stock":true},{"title":"14m","offer_id":56594044289403,"sku":"IP-SGDS-13.4X11-14M","price":111.72,"currency_code":"GBP","in_stock":true},{"title":"15m","offer_id":56594044322171,"sku":"IP-SGDS-13.4X11-15M","price":119.7,"currency_code":"GBP","in_stock":true},{"title":"16m","offer_id":56594044354939,"sku":"IP-SGDS-13.4X11-16M","price":127.68,"currency_code":"GBP","in_stock":true},{"title":"17m","offer_id":56594044387707,"sku":"IP-SGDS-13.4X11-17M","price":135.66,"currency_code":"GBP","in_stock":true},{"title":"18m","offer_id":56594044420475,"sku":"IP-SGDS-13.4X11-18M","price":143.64,"currency_code":"GBP","in_stock":true},{"title":"19m","offer_id":56594044453243,"sku":"IP-SGDS-13.4X11-19M","price":151.62,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":56594044486011,"sku":"IP-SGDS-13.4X11-20M","price":159.6,"currency_code":"GBP","in_stock":true},{"title":"21m","offer_id":56594044518779,"sku":"IP-SGDS-13.4X11-21M","price":167.58,"currency_code":"GBP","in_stock":true},{"title":"22m","offer_id":56594044551547,"sku":"IP-SGDS-13.4X11-22M","price":175.56,"currency_code":"GBP","in_stock":true},{"title":"23m","offer_id":56594044584315,"sku":"IP-SGDS-13.4X11-23M","price":183.54,"currency_code":"GBP","in_stock":true},{"title":"24m","offer_id":56594044617083,"sku":"IP-SGDS-13.4X11-24M","price":191.52,"currency_code":"GBP","in_stock":true},{"title":"25m","offer_id":56594044649851,"sku":"IP-SGDS-13.4X11-25M","price":199.5,"currency_code":"GBP","in_stock":true},{"title":"26m","offer_id":56594044682619,"sku":"IP-SGDS-13.4X11-26M","price":207.48,"currency_code":"GBP","in_stock":true},{"title":"27m","offer_id":56594044715387,"sku":"IP-SGDS-13.4X11-27M","price":215.46,"currency_code":"GBP","in_stock":true},{"title":"28m","offer_id":56594044748155,"sku":"IP-SGDS-13.4X11-28M","price":223.44,"currency_code":"GBP","in_stock":true},{"title":"29m","offer_id":56594044780923,"sku":"IP-SGDS-13.4X11-29M","price":231.42,"currency_code":"GBP","in_stock":true},{"title":"30m","offer_id":56594044813691,"sku":"IP-SGDS-13.4X11-30M","price":239.4,"currency_code":"GBP","in_stock":true},{"title":"31m","offer_id":56594044846459,"sku":"IP-SGDS-13.4X11-31M","price":247.38,"currency_code":"GBP","in_stock":true},{"title":"32m","offer_id":56594044879227,"sku":"IP-SGDS-13.4X11-32M","price":255.36,"currency_code":"GBP","in_stock":true},{"title":"33m","offer_id":56594044911995,"sku":"IP-SGDS-13.4X11-33M","price":263.34,"currency_code":"GBP","in_stock":true},{"title":"34m","offer_id":56594044944763,"sku":"IP-SGDS-13.4X11-34M","price":271.32,"currency_code":"GBP","in_stock":true},{"title":"35m","offer_id":56594044977531,"sku":"IP-SGDS-13.4X11-35M","price":279.3,"currency_code":"GBP","in_stock":true},{"title":"36m","offer_id":56594045010299,"sku":"IP-SGDS-13.4X11-36M","price":287.28,"currency_code":"GBP","in_stock":true},{"title":"37m","offer_id":56594045043067,"sku":"IP-SGDS-13.4X11-37M","price":295.26,"currency_code":"GBP","in_stock":true},{"title":"38m","offer_id":56594045075835,"sku":"IP-SGDS-13.4X11-38M","price":303.24,"currency_code":"GBP","in_stock":true},{"title":"39m","offer_id":56594045108603,"sku":"IP-SGDS-13.4X11-39M","price":311.22,"currency_code":"GBP","in_stock":true},{"title":"40m","offer_id":56594045141371,"sku":"IP-SGDS-13.4X11-40M","price":319.2,"currency_code":"GBP","in_stock":true},{"title":"41m","offer_id":56594045174139,"sku":"IP-SGDS-13.4X11-41M","price":327.18,"currency_code":"GBP","in_stock":true},{"title":"42m","offer_id":56594045206907,"sku":"IP-SGDS-13.4X11-42M","price":335.16,"currency_code":"GBP","in_stock":true},{"title":"43m","offer_id":56594045239675,"sku":"IP-SGDS-13.4X11-43M","price":343.14,"currency_code":"GBP","in_stock":true},{"title":"44m","offer_id":56594045272443,"sku":"IP-SGDS-13.4X11-44M","price":351.12,"currency_code":"GBP","in_stock":true},{"title":"45m","offer_id":56594045305211,"sku":"IP-SGDS-13.4X11-45M","price":359.1,"currency_code":"GBP","in_stock":true},{"title":"46m","offer_id":56594045337979,"sku":"IP-SGDS-13.4X11-46M","price":367.08,"currency_code":"GBP","in_stock":true},{"title":"47m","offer_id":56594045370747,"sku":"IP-SGDS-13.4X11-47M","price":375.06,"currency_code":"GBP","in_stock":true},{"title":"48m","offer_id":56594045403515,"sku":"IP-SGDS-13.4X11-48M","price":383.04,"currency_code":"GBP","in_stock":true},{"title":"49m","offer_id":56594045436283,"sku":"IP-SGDS-13.4X11-49M","price":391.02,"currency_code":"GBP","in_stock":true},{"title":"50m (full coil)","offer_id":56594045469051,"sku":"IP-SGDS-13.4X11-50M-COIL","price":267.0,"currency_code":"GBP","in_stock":true},{"title":"60m","offer_id":56594045501819,"sku":"IP-SGDS-13.4X11-60M","price":320.4,"currency_code":"GBP","in_stock":true},{"title":"70m","offer_id":56594045534587,"sku":"IP-SGDS-13.4X11-70M","price":373.8,"currency_code":"GBP","in_stock":true},{"title":"80m","offer_id":56594045567355,"sku":"IP-SGDS-13.4X11-80M","price":427.2,"currency_code":"GBP","in_stock":true},{"title":"90m","offer_id":56594045600123,"sku":"IP-SGDS-13.4X11-90M","price":480.6,"currency_code":"GBP","in_stock":true},{"title":"100m (2 x 50m coils)","offer_id":56594045632891,"sku":"IP-SGDS-13.4X11-100M-2COIL","price":504.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/self-grip-door-seal-13-4x11mm-end-view-black.png?v=1795310791","url":"https:\/\/industrial-polymers.co.uk\/products\/self-grip-door-seal-epdm-rubber-and-sponge-13-4mm-x-11mm-per-metre","provider":"Industrial-polymers ","version":"1.0","type":"link"}