{"product_id":"self-grip-epdm-door-seal-24mm-x-15mm-for-1-6mm-to-3mm-panels-per-metre","title":"Self-Grip Door Seal 24mm x 15mm with 16mm Sponge Bulb – EPDM, Fits 1.6-3mm Panels – 8m to 50m","description":"\u003cp\u003e\u003cstrong\u003eA push-on door seal for 1.6 mm to 3 mm edges: a solid EPDM U-clip with a steel wire insert and gripping fins inside, plus a large round EPDM sponge bulb (16 mm across) on its side.\u003c\/strong\u003e The clip holds the bare panel edge with no glue or screws. When the door, hatch or lid closes against the side bulb, the bulb squashes and seals out rain, draughts and dust. The profile is 24 mm wide overall and about 15 mm high; the clip is 10 mm wide with a 12.5 mm deep grip and a 5 mm mouth. Choose one continuous length from 8 m to 24 m, a full 25 m coil, or two full coils (50 m). It is held in stock in the UK for same-day dispatch.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e sheet, panel and flange edges 1.6 mm to 3 mm thick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 24 mm overall width × 15 mm nominal height; U-clip 10 mm wide, 12.5 mm grip depth, 5 mm slot mouth; sponge bulb Ø16 mm outside with an Ø11 mm bore\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e solid EPDM U-clip (80° Shore A) over a full-length steel wire carrier, with angled fins on both inner walls; hollow closed-cell EPDM sponge bulb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeals best\u003c\/strong\u003e when the closed door squeezes the bulb by 30–40 % (about 5–6 mm). Do not go past 50 % (8 mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking temperature:\u003c\/strong\u003e −40 °C to +80 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrice:\u003c\/strong\u003e £18.63 per metre inc VAT for 8 m to 24 m. The full 25 m coil is £13.98 per metre (£349.50), so it costs less than any cut length from 19 m up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/self-grip-door-seal-24x15mm-technical-drawing.png?v=1795316192\" alt=\"Technical drawing of the 24 x 15 mm self-grip door seal: 24 mm overall width, 15 mm height, 10 mm U-clip with 12.5 mm grip depth and 5 mm mouth, 16 mm sponge bulb with 11 mm bore, fits 1.6-3 mm panels\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/self-grip-door-seal-24x15mm-how-it-fits.png?v=1795316192\" alt=\"Illustration: how the 24 x 15 mm self-grip door seal fits, with the fins gripping a 2 mm panel edge and a closing door squeezing the round sponge side bulb\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eClean the edge and file off any burrs, rust or weld spatter.\u003c\/li\u003e\n\u003cli\u003eStart at the bottom or the middle of a straight run, never on a corner.\u003c\/li\u003e\n\u003cli\u003ePush the seal onto the edge by hand, a short section at a time, with the bulb on the side the door closes against.\u003c\/li\u003e\n\u003cli\u003eTap it fully home with a rubber or plastic mallet. The edge should reach the top of the 12.5 mm grip.\u003c\/li\u003e\n\u003cli\u003eEase it round corners with a radius of about 30 mm or more. Do not stretch it, or it will shrink back and leave a gap.\u003c\/li\u003e\n\u003cli\u003eCut the end square, butt it tight to the start, and close the door to check that the bulb is squeezed evenly all round.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/self-grip-door-seal-24x15mm-in-use-illustration.png\" alt=\"Illustration: section through a frame and closed door, with the 24 x 15 mm self-grip seal on a 2 mm flange and its 16 mm sponge bulb squeezed to about 10 mm, true proportions with a 10 mm scale bar\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eWith the door shut, the gap from the flange face to the door is about 12 mm (11.5–13 mm), which squeezes the bulb by the ideal 30–40 %.\u003c\/p\u003e\n\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRestoration and replacement door, boot and bonnet seals on older vehicles with 1.6–3 mm flanges\u003c\/li\u003e\n\u003cli\u003eVan, trailer, horsebox and catering-trailer doors and lockers\u003c\/li\u003e\n\u003cli\u003eElectrical cabinets, control panels and outdoor enclosures with wide door gaps\u003c\/li\u003e\n\u003cli\u003eMachine guards, access panels and inspection hatches\u003c\/li\u003e\n\u003cli\u003eMarine hatches, deck lockers and workshop doors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eValues are from the manufacturer's product page and data sheet for this profile (RCDS24X12.5L). The manufacturer quotes the size both as 24 × 12.5 mm (the clip's grip depth) and 24 × 15 mm (overall height); both are shown below.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (clip + bulb)\u003c\/td\u003e\n\u003ctd\u003e24 mm\u003c\/td\u003e\n\u003ctd\u003eNominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e15 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, as quoted by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eU-clip width\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003ctd\u003eNominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrip depth (inside the U-clip)\u003c\/td\u003e\n\u003ctd\u003e12.5 mm\u003c\/td\u003e\n\u003ctd\u003eNominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot mouth\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003ctd\u003eNominal, between the leg tips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSponge bulb outside diameter\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003ctd\u003eNominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSponge bulb bore\u003c\/td\u003e\n\u003ctd\u003e11 mm\u003c\/td\u003e\n\u003ctd\u003eNominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel \/ edge thickness it fits\u003c\/td\u003e\n\u003ctd\u003e1.6 mm to 3 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's fitting range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003ctd\u003eAsk us if your application is critical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied length\u003c\/td\u003e\n\u003ctd\u003e8 m to 24 m (1 m steps), 25 m full coil, or 2 × 25 m coils\u003c\/td\u003e\n\u003ctd\u003eCut lengths are one continuous piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSolid U-clip\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolymer\u003c\/td\u003e\n\u003ctd\u003eEPDM, solid\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e80° Shore A\u003c\/td\u003e\n\u003ctd\u003eShore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e80 kg\/cm² min (about 7.8 MPa)\u003c\/td\u003e\n\u003ctd\u003eASTM D412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear resistance\u003c\/td\u003e\n\u003ctd\u003e3 kg\/mm min (about 29 N\/mm)\u003c\/td\u003e\n\u003ctd\u003eASTM D624\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e40 % max\u003c\/td\u003e\n\u003ctd\u003eASTM D395 Type B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChange in tensile strength\u003c\/td\u003e\n\u003ctd\u003e+15 %\u003c\/td\u003e\n\u003ctd\u003eAs listed on the data sheet (conditions not stated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOzone resistance\u003c\/td\u003e\n\u003ctd\u003eNo cracks at 20 % elongation\u003c\/td\u003e\n\u003ctd\u003eASTM D1149\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSponge bulb\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolymer\u003c\/td\u003e\n\u003ctd\u003eEPDM, closed-cell sponge\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity (indicative)\u003c\/td\u003e\n\u003ctd\u003e550–600 kg\/m³\u003c\/td\u003e\n\u003ctd\u003eData sheet prints the unit as g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd\u003e1.2 % max\u003c\/td\u003e\n\u003ctd\u003eASTM D1056\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e7–10 kg\/cm² (about 0.7–1.0 MPa)\u003c\/td\u003e\n\u003ctd\u003eASTM D412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear resistance\u003c\/td\u003e\n\u003ctd\u003e0.6–0.8 kg\/mm (about 5.9–7.8 N\/mm)\u003c\/td\u003e\n\u003ctd\u003eASTM D624\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSteel wire carrier\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrade\u003c\/td\u003e\n\u003ctd\u003eFe 50 (UNI 5961-67)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e80–90 HRB\u003c\/td\u003e\n\u003ctd\u003eRockwell B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e50 kg\/mm² min (about 490 MPa)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eComplete profile\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStaining (migration and contact)\u003c\/td\u003e\n\u003ctd\u003eSatisfactory\u003c\/td\u003e\n\u003ctd\u003eASTM D925\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour fastness\u003c\/td\u003e\n\u003ctd\u003eSatisfactory\u003c\/td\u003e\n\u003ctd\u003eASTM D750\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e−40 °C to +80 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer's rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb compression\u003c\/td\u003e\n\u003ctd\u003e30–40 % ideal, 50 % max\u003c\/td\u003e\n\u003ctd\u003eManufacturer's guidance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThe clip is solid EPDM rubber with a steel wire carrier moulded inside it. The bulb is closed-cell EPDM sponge. EPDM resists UV, ozone, rain and many everyday detergents and chemicals well, which is why it is the usual choice for outdoor door seals. The manufacturer does not publish any food-contact, WRAS, REACH or RoHS statement for this profile, so we do not claim one. If you need a declaration for your project, ask us before you order.\u003c\/p\u003e\n\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eMeasure all the way round the opening or edge you want to seal and add about 2 % for trimming and the butt joint. For example, a car door aperture of about 1.0 × 1.1 m needs roughly 2 × (1.0 + 1.1) = 4.2 m, so two doors need about 8.6 m: order 9 m. Each cut length is sent as one continuous piece. From 19 m up, the 25 m coil is the cheaper choice.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat thickness of edge will it grip?\u003c\/strong\u003e\u003cbr\u003eEdges from 1.6 mm to 3 mm, which covers most sheet-steel and aluminium door flanges. Thinner than 1.6 mm and it may slide; thicker than 3 mm and it will not seat fully. Ask us for a profile to suit other thicknesses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need glue or screws?\u003c\/strong\u003e\u003cbr\u003eNo. The steel wire insert and the angled fins grip the edge on their own. At the start and end of a run, or on an edge that gets knocked a lot, a dab of contact adhesive in the slot can help.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich side should the bulb go?\u003c\/strong\u003e\u003cbr\u003eFit it so that the bulb faces the part that closes against it, such as the door skin or the hatch lid. Aim for the closed door to squash the 16 mm bulb by about 5–6 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my classic car?\u003c\/strong\u003e\u003cbr\u003eIt is a common profile for doors and boot lids on many older British vehicles with a 1.6–3 mm pinch-weld flange and a wide door gap. Check your flange thickness and the gap between the flange face and the closed door (about 11.5–13 mm suits this seal) before you order, or send us a photo and we will check it for you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it go round corners?\u003c\/strong\u003e\u003cbr\u003eYes, it bends round corners with a radius of about 30 mm or more. On a sharp 90° corner, cut a small V-notch in the back of the clip, or mitre and butt two pieces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eUse heavy-duty side cutters or a fine-tooth hacksaw to go through the steel wire, then tidy the sponge with a sharp knife. Butt the two ends tightly together. You can bond the sponge faces with cyanoacrylate (superglue) for a fully closed ring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable outdoors and at what temperatures?\u003c\/strong\u003e\u003cbr\u003eYes. Both the clip and the bulb are EPDM, ozone-tested and rated from −40 °C to +80 °C. Keep it away from exhausts and other hot surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it mark paintwork?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer rates it satisfactory for migration and contact staining (ASTM D925). As with any rubber product, try it on a hidden area first if the finish is pale or freshly painted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it in stock?\u003c\/strong\u003e\u003cbr\u003eYes. Orders placed before the cut-off time on working days are dispatched the same day from our UK stock.\u003c\/p\u003e\n\n\u003cp\u003eNeed help choosing the right profile? Contact \u003ca href=\"\/pages\/contact\"\u003eour team\u003c\/a\u003e on +44 1282 277786 or sales@industrial-polymers.co.uk.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"8 m","offer_id":56588460360059,"sku":"IP-SGDS-24X15-L08","price":149.04,"currency_code":"GBP","in_stock":true},{"title":"9 m","offer_id":56594073911675,"sku":"IP-SGDS-24X15-L09","price":167.67,"currency_code":"GBP","in_stock":true},{"title":"10 m","offer_id":56594073944443,"sku":"IP-SGDS-24X15-L10","price":186.3,"currency_code":"GBP","in_stock":true},{"title":"11 m","offer_id":56594073977211,"sku":"IP-SGDS-24X15-L11","price":204.93,"currency_code":"GBP","in_stock":true},{"title":"12 m","offer_id":56594074009979,"sku":"IP-SGDS-24X15-L12","price":223.56,"currency_code":"GBP","in_stock":true},{"title":"13 m","offer_id":56594074042747,"sku":"IP-SGDS-24X15-L13","price":242.19,"currency_code":"GBP","in_stock":true},{"title":"14 m","offer_id":56594074075515,"sku":"IP-SGDS-24X15-L14","price":260.82,"currency_code":"GBP","in_stock":true},{"title":"15 m","offer_id":56594074108283,"sku":"IP-SGDS-24X15-L15","price":279.45,"currency_code":"GBP","in_stock":true},{"title":"16 m","offer_id":56594074141051,"sku":"IP-SGDS-24X15-L16","price":298.08,"currency_code":"GBP","in_stock":true},{"title":"17 m","offer_id":56594074173819,"sku":"IP-SGDS-24X15-L17","price":316.71,"currency_code":"GBP","in_stock":true},{"title":"18 m","offer_id":56594074206587,"sku":"IP-SGDS-24X15-L18","price":335.34,"currency_code":"GBP","in_stock":true},{"title":"19 m","offer_id":56594074239355,"sku":"IP-SGDS-24X15-L19","price":353.97,"currency_code":"GBP","in_stock":true},{"title":"20 m","offer_id":56594074272123,"sku":"IP-SGDS-24X15-L20","price":372.6,"currency_code":"GBP","in_stock":true},{"title":"21 m","offer_id":56594074304891,"sku":"IP-SGDS-24X15-L21","price":391.23,"currency_code":"GBP","in_stock":true},{"title":"22 m","offer_id":56594074337659,"sku":"IP-SGDS-24X15-L22","price":409.86,"currency_code":"GBP","in_stock":true},{"title":"23 m","offer_id":56594074370427,"sku":"IP-SGDS-24X15-L23","price":428.49,"currency_code":"GBP","in_stock":true},{"title":"24 m","offer_id":56594074403195,"sku":"IP-SGDS-24X15-L24","price":447.12,"currency_code":"GBP","in_stock":true},{"title":"25 m full coil","offer_id":56594074435963,"sku":"IP-SGDS-24X15-C25","price":349.5,"currency_code":"GBP","in_stock":true},{"title":"50 m (2 × 25 m coils)","offer_id":56594074468731,"sku":"IP-SGDS-24X15-C50","price":699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/self-grip-epdm-door-seal-24mm-x-15mm-for-1-6mm-to-3mm-panels-studio.jpg?v=1794952147","url":"https:\/\/industrial-polymers.co.uk\/products\/self-grip-epdm-door-seal-24mm-x-15mm-for-1-6mm-to-3mm-panels-per-metre","provider":"Industrial-polymers ","version":"1.0","type":"link"}