{"product_id":"self-grip-pvc-edge-trim-6-5mm-x-9-5mm-50m-coil","title":"Self-Grip PVC Edge Trim – 6.5mm x 9.5mm – Fits 1mm to 1.5mm Panels – 50m Coil","description":"\u003cp\u003e\u003cstrong\u003eA black PVC edge trim with a steel carrier that pushes onto 1 mm to 1.5 mm sheet edges and holds by grip alone, with no glue.\u003c\/strong\u003e The profile is 6.5 mm wide and 9.5 mm high, with a 1.5 mm slot. A U-shaped steel strip runs inside the PVC for the full length and keeps the jaws clamped, while two flexible fins inside the channel fold up against both faces of the panel and stop it pulling off. It covers sharp cut edges, protects the panel from knocks and gives a neat, finished look. It comes as one continuous 50 m coil and is in stock in the UK for same-day dispatch.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e sheet metal, plastic, fibreglass and board edges 1 mm to 1.5 mm thick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 6.5 mm wide × 9.5 mm high, 1.5 mm slot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e flexible PVC, 67° to 82° Shore A, moulded over a U-shaped steel carrier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip:\u003c\/strong\u003e twin internal fins and the steel clamp hold it on with no adhesive, so it can be removed and refitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking temperature:\u003c\/strong\u003e −10 °C to +60 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e one 50 m coil, £312.57 inc VAT (£6.25 per metre)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/self-grip-pvc-edge-trim-6-5x9-5mm-technical-drawing.png?v=1795042763\" alt=\"Technical drawing of the 6.5 x 9.5 mm self-grip PVC edge trim cross-section: 6.5 mm wide, 9.5 mm high, 1.5 mm slot, U-shaped steel carrier and twin gripping fins, fits 1 to 1.5 mm panels\" width=\"2000\" height=\"1490\" loading=\"lazy\" style=\"width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eAll dimensions are in mm and nominal. The drawing is not to scale. The carrier and fin shapes are shown as typical.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ basis\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003eSelf-gripping U edge trim with steel carrier and twin internal gripping fins\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e6.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing and data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e9.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing and data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot opening (unflexed)\u003c\/td\u003e\n\u003ctd\u003e1.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel thickness it fits\u003c\/td\u003e\n\u003ctd\u003e1.0 mm to 1.5 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer product data (range data sheet lists 0.8 mm to 1.5 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSide wall each side of the slot\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003ctd\u003eCalculated: (6.5 − 1.5) ÷ 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJacket material\u003c\/td\u003e\n\u003ctd\u003eFlexible PVC\u003c\/td\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarrier\u003c\/td\u003e\n\u003ctd\u003eSteel, U-shaped, full length\u003c\/td\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e67° to 82° Shore A\u003c\/td\u003e\n\u003ctd\u003eManufacturer data; method not stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum working temperature\u003c\/td\u003e\n\u003ctd\u003e−10 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum working temperature\u003c\/td\u003e\n\u003ctd\u003e+60 °C\u003c\/td\u003e\n\u003ctd\u003eManufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003eNot stated for this profile\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eNot stated; dimensions are nominal\u003c\/td\u003e\n\u003ctd\u003eAsk us if you need it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied as\u003c\/td\u003e\n\u003ctd\u003eOne continuous 50 m coil\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e£312.57 inc VAT per coil (£6.25 per metre)\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThe trim is a flexible PVC jacket moulded over a steel carrier. PVC stands up well to moisture, weather and many everyday chemicals, so the trim can be used indoors and outdoors within its −10 °C to +60 °C range. The manufacturer does not state any food-contact (FDA, EC 1935\/2004), drinking-water (WRAS), fire-rating, REACH, RoHS or other product approvals for this profile, so we do not claim any. Do not use it where a certified material is required; ask us for a certified alternative.\u003c\/p\u003e\n\n\u003ch3\u003eHow it fits\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/self-grip-pvc-edge-trim-6-5x9-5mm-how-it-fits.png?v=1795042764\" alt=\"How it fits: section through the 6.5 x 9.5 mm edge trim pushed onto a 1.5 mm panel, with the twin fins gripping both faces, plus four fitting steps\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:700px;height:auto\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the edge.\u003c\/strong\u003e The panel should be 1 mm to 1.5 mm thick. Deburr the edge and make sure it is clean and dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush on.\u003c\/strong\u003e Start at one end and press the trim fully onto the edge by hand, working along the run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat it.\u003c\/strong\u003e Tap along the top with a rubber or plastic mallet until the edge reaches the top of the channel. You need no adhesive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut and finish.\u003c\/strong\u003e Cut through the PVC and steel with side cutters, tin snips or a fine hacksaw. Butt the ends tightly together.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFinishing cut edges on sheet steel and aluminium panels, enclosures and computer or electrical cabinets\u003c\/li\u003e\n\u003cli\u003eSafety edging on machine guards, brackets and access hatches\u003c\/li\u003e\n\u003cli\u003eGarage doors, sheds, playground equipment and other outdoor sheet edges\u003c\/li\u003e\n\u003cli\u003eFibreglass, plastic and composite panels in marine and vehicle interiors\u003c\/li\u003e\n\u003cli\u003eInterior side panels, trim panels and side window surrounds\u003c\/li\u003e\n\u003cli\u003eProtecting sheet and glass edges in storage and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat thickness of panel does it fit?\u003c\/strong\u003e\u003cbr\u003eIt is made for edges 1 mm to 1.5 mm thick, which covers most 1.2 mm sheet steel and aluminium. It will not grip firmly on thinner material. For 1.5 mm to 3 mm edges, choose a larger self-grip trim such as the 12 × 15.5 mm size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it different from the 5.5 × 8.5 mm trim?\u003c\/strong\u003e\u003cbr\u003eBoth fit 1 mm to 1.5 mm edges. This one is larger, at 6.5 × 9.5 mm, so it gives a fuller, more visible edge and more cushioning against knocks. It also grips with two symmetrical fins rather than a barb and arm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I need?\u003c\/strong\u003e\u003cbr\u003eMeasure the total run in metres and add about 5 % for cuts and corners. One coil covers up to 50 m. If you need a shorter piece, our 5.5 × 8.5 mm trim is sold in lengths from 14 m.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need glue?\u003c\/strong\u003e\u003cbr\u003eNo. The steel carrier keeps the jaws clamped and the two fins hold the trim on. Because there is no adhesive, you can remove it and fit it again.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it go round corners and curves?\u003c\/strong\u003e\u003cbr\u003eYes. The steel carrier bends, so the trim follows curves and radiused corners. For a sharp 90° external corner, cut a small V-notch in the inside of the trim so it folds neatly without bunching.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eBecause of the steel carrier, a knife alone will not do. Use side cutters, tin snips or a fine-tooth hacksaw, then trim any burr. Butt the ends tightly for a neat joint; no joining piece is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer rates it for −10 °C to +60 °C. It is not suitable for hot engine bays, ovens or places that get very cold. Ask us about a silicone or EPDM trim for those.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. PVC resists moisture and weather well, so it suits garage doors, sheds and outdoor equipment within its temperature range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e\u003cbr\u003eA flexible black PVC jacket, 67° to 82° Shore A, moulded over a U-shaped steel carrier, with two gripping fins inside the channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe or fire rated?\u003c\/strong\u003e\u003cbr\u003eNo approvals are stated for this profile, so do not use it where food-contact, drinking-water or fire certification is needed.\u003c\/p\u003e\n\n\u003ch3\u003eComplete your project\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/self-grip-pvc-edge-trim-5-5mm-x-8-5mm-profile-cut-to-length\"\u003eSelf-Grip PVC Edge Trim – 5.5mm x 8.5mm – 14m to 50m lengths\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pvc-self-grip-edge-trim-12mm-x-15-5mm-cut-to-length\"\u003ePVC Self-Grip Edge Trim – 12mm x 15.5mm – for thicker panels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-self-grip-edge-trim-8-9mm-x-12-4mm-1mm-to-4mm-panels\"\u003eSilicone Self-Grip Edge Trim – 8.9mm x 12.4mm – 1mm to 4mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/epdm-u-channel-4-8mm-x-9-6mm-black-rubber-edge-trim-per-length\"\u003eEPDM U Channel – 4.8mm x 9.6mm – fits 1.6 mm panels\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help choosing or fitting? Call \u003ca href=\"tel:+441282277786\"\u003e+44 1282 277786\u003c\/a\u003e, email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003econtact our team\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"Industrial Polymers","offers":[{"title":"Default Title","offer_id":56582744408443,"sku":"IP-PVCET-6.5X9.5-50M","price":312.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/self-grip-pvc-edge-trim-6-5mm-x-9-5mm-50m-coil-studio.jpg?v=1794745761","url":"https:\/\/industrial-polymers.co.uk\/products\/self-grip-pvc-edge-trim-6-5mm-x-9-5mm-50m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}