{"product_id":"silicone-l-profile-10mm-x-5mm-25m-coil-fda-and-wras-approved","title":"Silicone L Profile – 10mm x 5mm, Light Section (3.6mm Upright, 2mm Base) – 25m Coil","description":"\u003cp\u003eA solid silicone angle section, 10mm wide and 5mm high, with a slim \u003cstrong\u003e3.6mm upright and a 2mm base\u003c\/strong\u003e. This is the lighter of our two 10 x 5mm L profiles: it leaves a deep 6.4 x 3mm step that seats over a sheet or panel corner, so it caps and cushions an edge without adding much bulk. Made from 60 Shore A silicone, it stays flexible from -50°C to +180°C and the compound meets FDA 21 CFR 177.2600, EC 1935\/2004 and WRAS. Sold as one continuous 25m coil in seven colours.\u003c\/p\u003e \u003ch3\u003eAt a glance\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10mm wide x 5mm high, light section (3.6mm upright, 2mm base)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eStep:\u003c\/strong\u003e 6.4mm wide x 3mm deep, the pocket that sits over an edge\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e solid silicone, 60 Shore A\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e -50°C to +180°C working range\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e FDA 21 CFR 177.2600, EC 1935\/2004, WRAS approved\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e one 25m coil, £27.00 per metre inc VAT\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e black, blue, green, red, translucent, white, yellow\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eWhich 10 x 5mm L profile do you need?\u003c\/h3\u003e \u003cp\u003eWe stock two silicone L profiles with the same 10 x 5mm outside size. Their wall thicknesses are different. Measure the edge you are covering and pick the step that suits it.\u003c\/p\u003e \u003ctable\u003e \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eThis profile: light section\u003c\/th\u003e\n\u003cth\u003e\u003ca href=\"\/products\/silicone-l-profile-60-shore-a-10mm-x-5mm-25m-coil\"\u003eHeavy section\u003c\/a\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003ctd\u003eOverall size\u003c\/td\u003e\n\u003ctd\u003e10 x 5mm\u003c\/td\u003e\n\u003ctd\u003e10 x 5mm\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eUpright width\u003c\/td\u003e\n\u003ctd\u003e3.6mm\u003c\/td\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eBase thickness\u003c\/td\u003e\n\u003ctd\u003e2mm\u003c\/td\u003e\n\u003ctd\u003e2.5mm\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eStep (width x depth)\u003c\/td\u003e\n\u003ctd\u003e6.4 x 3mm\u003c\/td\u003e\n\u003ctd\u003e5 x 2.5mm\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eCross-section area (calculated)\u003c\/td\u003e\n\u003ctd\u003e30.8mm²\u003c\/td\u003e\n\u003ctd\u003e37.5mm²\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003eLighter, more flexible cap with a deeper pocket; follows curves more easily\u003c\/td\u003e\n\u003ctd\u003eStiffer, more impact-absorbing bumper\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch3\u003eTechnical drawing\u003c\/h3\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-l-profile-10x5mm-3-6-upright-technical-drawing.png?v=1795220650\" alt=\"Technical drawing of the 10 x 5 mm silicone L profile, light section: 10 mm wide, 5 mm high, 3.6 mm upright, 2 mm base, 6.4 x 3 mm step\" width=\"1000\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e \u003ch3\u003eSpecifications\u003c\/h3\u003e \u003ctable\u003e \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eSolid L (angle) section\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e10.0mm\u003c\/td\u003e\n\u003ctd\u003eSupplier drawing\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e5.0mm\u003c\/td\u003e\n\u003ctd\u003eSupplier drawing\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eUpright (vertical leg) width\u003c\/td\u003e\n\u003ctd\u003e3.6mm\u003c\/td\u003e\n\u003ctd\u003eSupplier drawing\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eBase (horizontal leg) thickness\u003c\/td\u003e\n\u003ctd\u003e2.0mm\u003c\/td\u003e\n\u003ctd\u003eSupplier drawing\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eStep width x depth\u003c\/td\u003e\n\u003ctd\u003e6.4 x 3.0mm\u003c\/td\u003e\n\u003ctd\u003eDerived from the drawing (10 - 3.6, 5 - 2)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eWall thickness range\u003c\/td\u003e\n\u003ctd\u003e2.0 to 3.6mm\u003c\/td\u003e\n\u003ctd\u003eSupplier data\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eClass E2\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1:2014\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eCoil length\u003c\/td\u003e\n\u003ctd\u003e25m continuous\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eApproximate weight\u003c\/td\u003e\n\u003ctd\u003e35g per metre, about 0.9kg per coil\u003c\/td\u003e\n\u003ctd\u003eCalculated from section area x density\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSilicone rubber (VMQ), solid\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e60 Shore A\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 48-4\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.15 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eDIN EN ISO 1183-1 method A\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e11 N\/mm² (11 MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 37 type 1\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e550%\u003c\/td\u003e\n\u003ctd\u003eISO 37 type 1\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e26 N\/mm\u003c\/td\u003e\n\u003ctd\u003eASTM D624 die B\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e31% after 22h at 175°C\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 815-1 type B, method A\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eRebound resilience\u003c\/td\u003e\n\u003ctd\u003e59%\u003c\/td\u003e\n\u003ctd\u003eISO 4662\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e-50°C to +180°C\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eOzone, UV, oxidation, weathering, cosmic and ionising radiation, corona discharge\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlack, blue, green, red, translucent, white, yellow\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch3\u003eMaterials and compliance\u003c\/h3\u003e \u003cp\u003eThe manufacturer's datasheet for this exact profile states that the silicone compound is:\u003c\/p\u003e \u003cul\u003e \u003cli\u003ecompliant with \u003cstrong\u003eFDA 21 CFR 177.2600\u003c\/strong\u003e (rubber articles for repeated food contact)\u003c\/li\u003e \u003cli\u003ecompliant with \u003cstrong\u003eEC 1935\/2004\u003c\/strong\u003e (materials in contact with food)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eWRAS approved\u003c\/strong\u003e for use with drinking water\u003c\/li\u003e \u003cli\u003efree from TSE\/BSE animal by-products\u003c\/li\u003e \u003cli\u003efree from phthalates\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFood and water approvals cover the material. Check that your finished assembly suits its own food-safety or water-regulations requirements.\u003c\/p\u003e \u003ch3\u003eTypical uses\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCapping and cushioning sheet-metal and panel corners on machine guards, enclosures and conveyor side guards\u003c\/li\u003e \u003cli\u003eEdge protection for glass, acrylic and composite panels\u003c\/li\u003e \u003cli\u003eFood, bakery and beverage equipment where an FDA or EC 1935\/2004 material is needed\u003c\/li\u003e \u003cli\u003eDrinking-water equipment covers and housings (WRAS-approved compound)\u003c\/li\u003e \u003cli\u003eOven, dryer and hot-cabinet panel edges, up to +180°C\u003c\/li\u003e \u003cli\u003eColour-coded edges for zone marking in food plants and cleanrooms\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eFitting\u003c\/h3\u003e \u003col\u003e \u003cli\u003eClean the edge and dry it. Remove grease with isopropyl alcohol.\u003c\/li\u003e \u003cli\u003eSeat the panel corner into the 6.4 x 3mm step so the 2mm base lies along one face and the 3.6mm upright covers the other.\u003c\/li\u003e \u003cli\u003eFor a permanent or watertight fit, run a thin bead of silicone adhesive-sealant along the inside of the step before pressing it home. Most adhesives do not bond to silicone.\u003c\/li\u003e \u003cli\u003eCut lengths about 1% long and push them together, so the ends stay closed as the profile relaxes.\u003c\/li\u003e \u003cli\u003eAt corners, mitre the profile at 45° with a sharp blade and seal the joint with silicone sealant. Alternatively, cut a V-notch out of the upright and bend the base round.\u003c\/li\u003e \u003c\/ol\u003e \u003ch3\u003eFrequently asked questions\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eWhat size edge does it fit?\u003c\/strong\u003e\u003cbr\u003eThe step is 6.4mm wide and 3mm deep. It caps the corner of a sheet or panel, covering up to 6.4mm of one face and up to 3mm of the other. It is a solid angle, not a push-on U channel, so it is bonded or held in place rather than gripping the edge.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHow is this different from your other 10 x 5mm silicone L profile?\u003c\/strong\u003e\u003cbr\u003eBoth measure 10 x 5mm overall. This light section has a 3.6mm upright and a 2mm base. The \u003ca href=\"\/products\/silicone-l-profile-60-shore-a-10mm-x-5mm-25m-coil\"\u003eheavy section\u003c\/a\u003e has a 5mm upright and a 2.5mm base. It is stiffer and absorbs more impact, but its step is smaller (5 x 2.5mm).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCan it be used in food production?\u003c\/strong\u003e\u003cbr\u003eYes. The manufacturer states the compound meets FDA 21 CFR 177.2600 and EC 1935\/2004. The colours also suit colour-coded hygiene zones.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe working range is -50°C to +180°C. At 175°C for 22 hours it takes a compression set of 31%, so it keeps its shape well on hot equipment.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut it with a sharp knife or a rubber cutter against a straight edge. Make butt joints and mitres with a silicone sealant or a silicone-compatible instant adhesive with primer. Ordinary contact adhesives will not hold silicone.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIs it suitable outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. The datasheet lists resistance to ozone, UV, oxidation and weathering, so it will not crack or chalk outdoors as many black rubbers do.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCan I buy it by the metre?\u003c\/strong\u003e\u003cbr\u003eThis profile comes as a full 25m coil, which works out at £27.00 per metre inc VAT. Contact us if you need a shorter length or a different colour.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhen will it arrive?\u003c\/strong\u003e\u003cbr\u003eIt is held in stock. See the dispatch message above the add-to-basket button.\u003c\/p\u003e \u003ch3\u003eData sheet\u003c\/h3\u003e \u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-l-profile-10mm-x-5mm-25m-coil-fda-and-wras-approved-data-sheet.pdf?v=1794748041\" target=\"_blank\" rel=\"noopener\"\u003eDownload the technical data sheet (PDF)\u003c\/a\u003e\u003c\/p\u003e \u003ch3\u003eRelated profiles\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"\/products\/silicone-l-profile-60-shore-a-10mm-x-5mm-25m-coil\"\u003eSilicone L Profile 10 x 5mm, heavy section (5mm upright, 2.5mm base)\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"\/products\/silicone-l-profile-7-7mm-x-7-1mm-25m-coil\"\u003eSilicone L Profile 7.7 x 7.1mm, 25m coil\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"\/products\/silicone-l-profile-10mm-x-10mm-60-shore-a-25m-coil\"\u003eSilicone L Profile 10 x 10mm, 25m coil\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eNeed help choosing? Call +44 1282 277786 or email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Black","offer_id":56582751289723,"sku":"IP-SLLP-10X5-BLACK","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":56582751322491,"sku":"IP-SLLP-10X5-BLUE","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":56582751355259,"sku":"IP-SLLP-10X5-GREEN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":56582751388027,"sku":"IP-SLLP-10X5-RED","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Translucent","offer_id":56582751420795,"sku":"IP-SLLP-10X5-TRANSLUC","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":56582751453563,"sku":"IP-SLLP-10X5-WHITE","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":56582751486331,"sku":"IP-SLLP-10X5-YELLOW","price":675.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-l-profile-10mm-x-5mm-25m-coil-fda-and-wras-approved-studio.jpg?v=1794748045","url":"https:\/\/industrial-polymers.co.uk\/products\/silicone-l-profile-10mm-x-5mm-25m-coil-fda-and-wras-approved","provider":"Industrial-polymers ","version":"1.0","type":"link"}