{"product_id":"silicone-l-profile-for-edge-protection-10-3mm-x-5mm-25m-coil","title":"Silicone L Profile – 10.3mm x 5mm, 3.5mm Upright, 3–3.5mm Base – 25m Coil","description":"\u003cp\u003eA compact, solid silicone angle section, \u003cstrong\u003e10.3mm wide and 5mm high\u003c\/strong\u003e, with a chunky \u003cstrong\u003e3.5mm upright and a 3mm to 3.5mm base\u003c\/strong\u003e. The thick base makes it one of the sturdiest small L profiles we stock: it caps and cushions a sheet or panel corner and takes knocks that would flatten a thinner trim. The top of the upright and the underside of the base are slightly tapered, as shown in the drawing below. Made from 60 Shore A silicone, it stays flexible from -50°C to +180°C, and the compound meets FDA 21 CFR 177.2600, EC 1935\/2004 and WRAS. Sold as one continuous 25m coil in seven colours.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10.3mm wide x 5mm high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSection:\u003c\/strong\u003e 3.5mm wide upright, 3mm to 3.5mm thick base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep:\u003c\/strong\u003e 6.8mm wide, the pocket that sits over an edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e solid silicone, 60 Shore A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e -50°C to +180°C working range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e FDA 21 CFR 177.2600, EC 1935\/2004, WRAS approved\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e one 25m coil, £27.00 per metre inc VAT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e black, blue, green, red, translucent, white, yellow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich small silicone L profile do you need?\u003c\/h3\u003e\n\u003cp\u003eOur 10mm-class silicone L profiles look alike but carry very different wall thicknesses. Measure the edge you are covering and choose by section, not just outside size.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eOverall size\u003c\/th\u003e\n\u003cth\u003eUpright\u003c\/th\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003cth\u003eChoose it when\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/silicone-l-profile-10mm-x-3mm-x-25m-60-shore-a-fda-and-wras-approved\"\u003eSilicone L 10 x 3mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10 x 3mm\u003c\/td\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003ctd\u003e1mm\u003c\/td\u003e\n\u003ctd\u003eYou need the lowest, lightest trim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/silicone-l-profile-10mm-x-5mm-25m-coil-fda-and-wras-approved\"\u003eSilicone L 10 x 5mm, light\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10 x 5mm\u003c\/td\u003e\n\u003ctd\u003e3.6mm\u003c\/td\u003e\n\u003ctd\u003e2mm\u003c\/td\u003e\n\u003ctd\u003eYou want a deep, flexible pocket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/silicone-l-profile-60-shore-a-10mm-x-5mm-25m-coil\"\u003eSilicone L 10 x 5mm, heavy\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10 x 5mm\u003c\/td\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003ctd\u003e2.5mm\u003c\/td\u003e\n\u003ctd\u003eYou want a wider upright face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSilicone L 10.3 x 5mm (this item)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10.3 x 5mm\u003c\/td\u003e\n\u003ctd\u003e3.5mm\u003c\/td\u003e\n\u003ctd\u003e3 to 3.5mm\u003c\/td\u003e\n\u003ctd\u003eYou want the thickest base and most impact cushioning at 5mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-l-profile-10-3x5mm-technical-drawing.png?v=1795304791\" alt=\"Technical drawing of the silicone L profile 10.3 x 5 mm: 10.3 mm overall width, 5 mm overall height, 4.5 mm outer face, 3.5 mm upright top width, base 3 mm thick at the free end and 3.5 mm from the datum\" width=\"1000\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method \/ note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eSolid L (angle) section, tapered faces\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e10.3mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e5.0mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter (back) face height\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpright (vertical leg) top width\u003c\/td\u003e\n\u003ctd\u003e3.5mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase thickness at the free end\u003c\/td\u003e\n\u003ctd\u003e3.0mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase height at the free end, from datum\u003c\/td\u003e\n\u003ctd\u003e3.5mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's drawing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall thickness range\u003c\/td\u003e\n\u003ctd\u003e3.0 to 3.5mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer's data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStep width\u003c\/td\u003e\n\u003ctd\u003e6.8mm\u003c\/td\u003e\n\u003ctd\u003eDerived from the drawing (10.3 - 3.5)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStep depth at the upright\u003c\/td\u003e\n\u003ctd\u003eAbout 1.8mm\u003c\/td\u003e\n\u003ctd\u003eScaled from the drawing, for guidance only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eClass E2\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1:2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil length\u003c\/td\u003e\n\u003ctd\u003e25m continuous\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApproximate weight\u003c\/td\u003e\n\u003ctd\u003eAbout 42g per metre, about 1.05kg per coil\u003c\/td\u003e\n\u003ctd\u003eCalculated from section area (about 36.7mm²) x density\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSilicone rubber, solid\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e60 Shore A\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 48-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.15 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eDIN EN ISO 1183-1 method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e11 N\/mm² (11 MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 37 type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e550%\u003c\/td\u003e\n\u003ctd\u003eISO 37 type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e26 N\/mm\u003c\/td\u003e\n\u003ctd\u003eASTM D624 die B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e31% after 22h at 175°C\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 815-1 type B, method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRebound resilience\u003c\/td\u003e\n\u003ctd\u003e59%\u003c\/td\u003e\n\u003ctd\u003eISO 4662\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e-50°C to +180°C\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eOzone, UV, oxidation, weathering, cosmic and ionising radiation, corona discharge\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlack, blue, green, red, translucent, white, yellow\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer's datasheet for this exact profile states that the silicone compound is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ecompliant with \u003cstrong\u003eFDA 21 CFR 177.2600\u003c\/strong\u003e (rubber articles for repeated food contact)\u003c\/li\u003e\n\u003cli\u003ecompliant with \u003cstrong\u003eEC 1935\/2004\u003c\/strong\u003e (materials in contact with food)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWRAS approved\u003c\/strong\u003e for use with drinking water\u003c\/li\u003e\n\u003cli\u003efree from TSE\/BSE animal by-products\u003c\/li\u003e\n\u003cli\u003efree from phthalates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese approvals cover the material. Check that your finished assembly meets its own food-safety or water-regulations requirements.\u003c\/p\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty corner caps on sheet-metal guards, enclosures, cabinets and conveyor side frames\u003c\/li\u003e\n\u003cli\u003eEdge protection for glass, acrylic and composite panels where knocks are frequent\u003c\/li\u003e\n\u003cli\u003eFood, bakery and beverage equipment that needs an FDA or EC 1935\/2004 material\u003c\/li\u003e\n\u003cli\u003eDrinking-water equipment covers and housings (WRAS-approved compound)\u003c\/li\u003e\n\u003cli\u003eOven, dryer and hot-cabinet panel edges, up to +180°C\u003c\/li\u003e\n\u003cli\u003eColour-coded edges for zone marking in food plants, laboratories and cleanrooms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eClean the edge and dry it. Remove grease with isopropyl alcohol.\u003c\/li\u003e\n\u003cli\u003eSeat the panel corner into the 6.8mm step so the thick base lies along one face and the 3.5mm upright covers the other.\u003c\/li\u003e\n\u003cli\u003eFor a permanent or watertight fit, run a thin bead of silicone or polyurethane adhesive-sealant along the inside of the step before pressing it home. Ordinary contact adhesives do not bond to silicone.\u003c\/li\u003e\n\u003cli\u003eCut lengths about 1% long and push them together, so the ends stay closed as the profile relaxes.\u003c\/li\u003e\n\u003cli\u003eAt corners, mitre the profile at 45° with a sharp blade and seal the joint with silicone sealant.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size edge does it fit?\u003c\/strong\u003e\u003cbr\u003eThe step is 6.8mm wide and about 1.8mm deep at the upright. It caps the corner of a sheet or panel, covering up to 6.8mm of one face. It is a solid angle, not a push-on U channel, so it is bonded or held in place rather than gripping the edge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it different from the 10 x 5mm silicone L profiles?\u003c\/strong\u003e\u003cbr\u003eIt is 0.3mm wider and its base is much thicker: 3 to 3.5mm against 2 or 2.5mm. That makes it stiffer and better at absorbing impact, but its pocket is shallower. See the comparison table above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are some faces tapered?\u003c\/strong\u003e\u003cbr\u003eThe outer face is 4.5mm high and the upright rises to 5mm, and the base underside rises 0.5mm towards the free end. The tapers are part of the manufacturer's section design. Allow for them when you check clearances: the profile is 5mm high at the upright but only 4.5mm at its outer face.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in food production?\u003c\/strong\u003e\u003cbr\u003eYes. The manufacturer states the compound meets FDA 21 CFR 177.2600 and EC 1935\/2004. The seven colours also suit colour-coded hygiene zones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe working range is -50°C to +180°C. After 22 hours at 175°C its compression set is 31%, so it keeps its shape well on hot equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut it with a sharp knife or a rubber cutter against a straight edge; a mitre box gives the neatest corners. Make butt joints and mitres with a silicone sealant or a silicone-compatible instant adhesive with primer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. The datasheet lists resistance to ozone, UV, oxidation and weathering, so it does not crack or chalk outdoors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy it by the metre?\u003c\/strong\u003e\u003cbr\u003eIt comes as a full 25m coil, which works out at £27.00 per metre inc VAT. Contact us if you need a shorter length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen will it arrive?\u003c\/strong\u003e\u003cbr\u003eIt is held in stock. See the dispatch message above the add-to-basket button.\u003c\/p\u003e\n\u003ch3\u003eRelated profiles\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-l-profile-60-shore-a-10mm-x-5mm-25m-coil\"\u003eSilicone L Profile 10 x 5mm, heavy section\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-l-profile-10mm-x-5mm-25m-coil-fda-and-wras-approved\"\u003eSilicone L Profile 10 x 5mm, light section\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-l-profile-for-edge-protection-10mm-x-7mm-25m-coil-fda-approved\"\u003eSilicone L Profile 10 x 7mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-l-profile-10mm-x-10mm-60-shore-a-25m-coil\"\u003eSilicone L Profile 10 x 10mm\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help choosing? Call +44 1282 277786 or email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Black","offer_id":56582856343931,"sku":"IP-SILP-10.3X5-BLACK","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":56582856376699,"sku":"IP-SILP-10.3X5-BLUE","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":56582856409467,"sku":"IP-SILP-10.3X5-GREEN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":56582856442235,"sku":"IP-SILP-10.3X5-RED","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Translucent","offer_id":56582856475003,"sku":"IP-SILP-10.3X5-TRANSLUC","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":56582856507771,"sku":"IP-SILP-10.3X5-WHITE","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":56582856540539,"sku":"IP-SILP-10.3X5-YELLOW","price":675.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-l-profile-10-3x5mm-black.png?v=1795304792","url":"https:\/\/industrial-polymers.co.uk\/products\/silicone-l-profile-for-edge-protection-10-3mm-x-5mm-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}