{"product_id":"silicone-t-profile-12mm-x-10-5mm-25m-coil","title":"Silicone T Seal Profile – 12mm x 10.5mm, 12mm Flat Head, 5mm Leg – 80 Shore A – 25m Coil","description":"\u003cp\u003eA firm, solid silicone T seal with a wide, low head: 12mm across and 4.5mm deep, on a 5mm push-in leg, 10.5mm tall overall. Press the leg into a slot about 4.8–5.0mm wide and the flat head sits 4.5mm proud of the frame, with a 3.5mm shoulder covering the slot edge on each side. At 80 Shore A it is one of the hardest T seals we sell, so it holds a crisp, straight line in a slot and stands up to knocks, cleaning and foot or trolley traffic better than a soft seal. It works from -50°C to +180°C, comes in seven colours at the same price, and is supplied as one unbroken 25m coil.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHead 12.0mm wide × 4.5mm deep; leg 5.0mm wide; 10.5mm overall (6.0mm of leg below the head)\u003c\/li\u003e\n\u003cli\u003e3.5mm shoulder each side of the leg, so the head hides both edges of the slot\u003c\/li\u003e\n\u003cli\u003e80 Shore A solid silicone: firm, hard-wearing and dimensionally stable\u003c\/li\u003e\n\u003cli\u003eWorking range -50°C to +180°C\u003c\/li\u003e\n\u003cli\u003eThe manufacturer states in writing that the compound meets FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact, and that it is a WRAS approved material\u003c\/li\u003e\n\u003cli\u003eBlack, white, translucent, red, green, blue or yellow, all £675.00 per 25m coil (£27.00 per metre)\u003c\/li\u003e\n\u003cli\u003eHeld in stock in every colour\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfill and cover strips in slotted stainless worktops, counters and catering equipment\u003c\/li\u003e\n\u003cli\u003eExpansion and panel joints between cabinets, enclosures and machine guards\u003c\/li\u003e\n\u003cli\u003eEdge seals on refrigeration, hot-cupboard and warming-equipment panels where the joint is closed once and stays closed\u003c\/li\u003e\n\u003cli\u003eDuct, air handling unit and access-panel joints\u003c\/li\u003e\n\u003cli\u003eOutdoor and marine hatch frames and panel joints, where UV and ozone crack ordinary rubbers\u003c\/li\u003e\n\u003cli\u003eColour-coded strips for hygiene zones (red, green, blue, yellow) or easy visual inspection (white, translucent)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-12x10-5mm-technical-drawing.png?v=1795310436\u0026amp;width=1000\" alt=\"Technical drawing of silicone T seal 12mm x 10.5mm: 12.0mm head width, 4.5mm head depth, 5.0mm leg width, 10.5mm overall height, 6.0mm leg below head, 3.5mm shoulders, 80 Shore A\" width=\"1000\" height=\"1220\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFull specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eSolid T section, square-cut flat head, centred leg\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e10.5 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead width\u003c\/td\u003e\n\u003ctd\u003e12.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead depth\u003c\/td\u003e\n\u003ctd\u003e4.5 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg width (base thickness)\u003c\/td\u003e\n\u003ctd\u003e5.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg length below head\u003c\/td\u003e\n\u003ctd\u003e6.0 mm (reference, 10.5 − 4.5)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulder each side\u003c\/td\u003e\n\u003ctd\u003e3.5 mm (reference, leg centred)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuits slot (our guidance)\u003c\/td\u003e\n\u003ctd\u003eApprox. 4.8–5.0 mm wide, at least 6 mm deep\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eClass E2\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1:2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength per coil\u003c\/td\u003e\n\u003ctd\u003e25 m, one continuous length\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMaterial and physical properties\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompound\u003c\/td\u003e\n\u003ctd\u003eSolid silicone rubber\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e80 Shore A\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 48-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.20 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eDIN EN ISO 1183-1, method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e10 N\/mm² (10 MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 37, type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e440 %\u003c\/td\u003e\n\u003ctd\u003eISO 37, type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e28 N\/mm (28 kN\/m)\u003c\/td\u003e\n\u003ctd\u003eASTM D624, die B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e78 % after 22 h at 175 °C\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 815-1, type B, method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRebound resilience\u003c\/td\u003e\n\u003ctd\u003e54 %\u003c\/td\u003e\n\u003ctd\u003eISO 4662\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eService conditions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e-50 °C to +180 °C\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eOzone, UV, oxidation, weathering, corona discharge, cosmic and ionising radiation\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSupply\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlack, white, translucent, red, green, blue, yellow\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. weight\u003c\/td\u003e\n\u003ctd\u003eAbout 101 g per metre, 2.5 kg per coil (calculated from the 84 mm² section and density)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit of sale\u003c\/td\u003e\n\u003ctd\u003e1 coil of 25 m (£27.00 per metre inc VAT)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOur part number\u003c\/td\u003e\n\u003ctd\u003eIP-SILT-12X10.5-\u0026lt;colour\u0026gt;\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eAll property values are the manufacturer's data for this profile. Slot size and closed-gap figures are our own fitting guidance.\u003c\/p\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThese are the claims the manufacturer makes in writing for this profile. Ask us if your file needs the declaration.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eClaim\u003c\/th\u003e\n\u003cth\u003eWhat it means for you\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA 21 CFR 177.2600\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the US rule for rubber articles in repeated contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEC 1935\/2004\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the EU framework regulation for materials that come into contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWRAS approved material\u003c\/td\u003e\n\u003ctd\u003eThe material is accepted for contact with drinking water in UK water fittings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree from TSE\/BSE by-products\u003c\/td\u003e\n\u003ctd\u003eNo animal-derived ingredients that carry TSE\/BSE risk.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhthalate free\u003c\/td\u003e\n\u003ctd\u003eMade without phthalate plasticisers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe approvals cover the material as supplied. Whether your finished assembly complies also depends on its design, its cleaning regime and the other materials in it, so check it against your own requirements.\u003c\/p\u003e\n\u003ch3\u003eIs this the right T seal for the job?\u003c\/h3\u003e\n\u003cp\u003eChoose this profile when you want a hard-wearing, low, wide head that fills and covers a 5mm slot neatly: worktop and panel joints, cover strips, and seals that are squeezed once and then left. Its compression set is 78% after 22 hours at 175°C, which means that when it is held squeezed at high heat it takes on that squeezed shape. For an oven or hot-cupboard door that opens and closes all day at high temperature, a softer 60 Shore A T seal with a deeper head will recover better. Ask us and we will suggest one.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my slot?\u003c\/h3\u003e\n\u003cp\u003eMeasure the slot's width and depth. The leg is 5mm wide, so it grips best in a slot of about 4.8–5.0mm. The slot should be at least 6mm deep so the head can sit right down on the frame; deeper is fine. You need about 3.5mm of flat land either side of the slot for the shoulders. If something closes onto the head, it stands 4.5mm proud: as a guide (our advice, not a supplier figure), a closed gap of about 3.5–4.0mm gives a firm seal on this hard compound without crushing it.\u003c\/p\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAdd up the length of every slot and allow about 5% for trimming and joints. For example, a 1.8m × 0.6m worktop with one slot down each long side needs 3.6m, or about 3.8m with the allowance, so one 25m coil does six worktops of that size.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClear old seal, grease and grit out of the slot and let it dry\u003c\/li\u003e\n\u003cli\u003eStart partway along a straight side, not at a corner\u003c\/li\u003e\n\u003cli\u003ePress the leg in with your thumb or a small plastic roller as you go. At 80 Shore A it is firm, so a drop of soapy water helps it slide into a tight slot.\u003c\/li\u003e\n\u003cli\u003eIf the slot is loose or the seal must not move, run a bead of silicone adhesive into the slot first\u003c\/li\u003e\n\u003cli\u003eThe wide, hard head will not bend round a tight corner: mitre the head at 45° and butt the ends, or notch the head and keep the leg continuous. Don't stretch it round: stretched silicone shrinks back and opens a gap.\u003c\/li\u003e\n\u003cli\u003eCut the end slightly long with a sharp knife and push the ends together; a dab of silicone adhesive keeps the joint closed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ: frequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat slot does it fit?\u003c\/strong\u003e\u003cbr\u003eA slot about 4.8–5.0mm wide and at least 6mm deep. The head is 12mm wide, so it overlaps the slot by 3.5mm each side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich way up does it go?\u003c\/strong\u003e\u003cbr\u003eThe 5mm leg goes into the slot. The flat 12mm head sits on the frame face, with its top facing outwards or towards the part that closes onto it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hard is it?\u003c\/strong\u003e\u003cbr\u003e80 Shore A, a firm silicone, close to the feel of a hard shoe heel. It keeps a sharp, straight edge and resists wear, but it is much stiffer to squeeze than our 60 Shore A T seals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states in writing that the compound meets FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact. It is also listed as a WRAS approved material for drinking water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe working range is -50°C to +180°C. Because the compression set is 78% after 22 hours at 175°C, it is best at high heat as a fixed joint or trim rather than on a door that is opened and closed all day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut it with a sharp utility knife or heavy shears on a cutting board, using a square to keep the cut straight. Butt the ends together, with a little silicone adhesive or RTV if the joint must stay sealed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. Silicone resists UV, ozone and weathering, which crack ordinary rubbers in outdoor and marine use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you stock every colour?\u003c\/strong\u003e\u003cbr\u003eYes. All seven colours are held in stock at the same price and dispatch with our standard delivery.\u003c\/p\u003e\n\u003cp\u003eNeed help choosing? Call +44 1282 277786 or email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e with your slot and gap sizes.\u003c\/p\u003e\n","brand":"Industrial Polymers","offers":[{"title":"Black","offer_id":56589498876283,"sku":"IP-SILT-12X10.5-BLACK","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":56589498909051,"sku":"IP-SILT-12X10.5-WHITE","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Translucent","offer_id":56589498941819,"sku":"IP-SILT-12X10.5-TRANSLUC","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":56589498974587,"sku":"IP-SILT-12X10.5-RED","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":56589499007355,"sku":"IP-SILT-12X10.5-GREEN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":56589499040123,"sku":"IP-SILT-12X10.5-BLUE","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":56589499072891,"sku":"IP-SILT-12X10.5-YELLOW","price":675.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-12x10-5mm-black.png?v=1795310437","url":"https:\/\/industrial-polymers.co.uk\/products\/silicone-t-profile-12mm-x-10-5mm-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}