{"product_id":"silicone-t-profile-12mm-x-8mm-head-25m-coil","title":"Silicone T Seal Profile – 12mm x 8mm, 12mm Flat Head, 4mm Leg – 60 Shore A – 25m Coil","description":"\u003cp\u003eA wide, low silicone T seal: a 12mm flat head only 3.5mm deep, on a 4mm push-in leg, 8mm tall overall. Press the leg into a slot about 3.8–4.0mm wide and the head sits 3.5mm proud of the frame, with a generous 4mm shoulder lying flat on the face either side. That broad, thin head covers a wide joint or a slightly ragged slot edge neatly, and gives a closing door, lid or panel a 12mm band of soft silicone to seal against. Made from 60 Shore A silicone for -50°C to +180°C, it comes in seven colours at the same price, in one unbroken 25m coil.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHead 12.0mm wide × 3.5mm deep; leg 4.0mm wide; 8.0mm overall (4.5mm of leg below the head)\u003c\/li\u003e\n\u003cli\u003e4.0mm shoulder each side of the leg, so the head covers both edges of the slot with room to spare\u003c\/li\u003e\n\u003cli\u003e60 Shore A solid silicone, working range -50°C to +180°C\u003c\/li\u003e\n\u003cli\u003eThe manufacturer states in writing that the compound meets FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact, and that it is a WRAS approved material\u003c\/li\u003e\n\u003cli\u003eBlack, white, translucent, red, green, blue or yellow, all £675.00 per 25m coil (£27.00 per metre)\u003c\/li\u003e\n\u003cli\u003eHeld in stock in every colour\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOven, prover, hot-cupboard and drying-cabinet doors, up to +180°C\u003c\/li\u003e\n\u003cli\u003eExpansion and panel joints between stainless cabinets, worktops and enclosures, where the wide head hides the joint\u003c\/li\u003e\n\u003cli\u003eAccess hatches and guards on food, bakery and packaging machinery\u003c\/li\u003e\n\u003cli\u003eHeater housings, air handling units and duct access panels\u003c\/li\u003e\n\u003cli\u003eOutdoor and marine hatches and enclosures, where UV and ozone crack ordinary rubbers\u003c\/li\u003e\n\u003cli\u003eColour-coded seals for hygiene zones (red, green, blue, yellow) or easy visual inspection (white, translucent)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-12x8mm-technical-drawing.png?v=1795307770\" alt=\"Technical drawing of silicone T seal 12mm x 8mm: head 12.0 x 3.5mm, leg 4.0mm wide, 8.0mm overall, 4.0mm shoulders, dimensions in mm\" width=\"2000\" height=\"2140\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFull specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eSolid T section, square-cut flat head, centred leg\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e8.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead width\u003c\/td\u003e\n\u003ctd\u003e12.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead depth\u003c\/td\u003e\n\u003ctd\u003e3.5 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg width (base thickness)\u003c\/td\u003e\n\u003ctd\u003e4.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg length below head\u003c\/td\u003e\n\u003ctd\u003e4.5 mm (reference, 8.0 − 3.5)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulder each side\u003c\/td\u003e\n\u003ctd\u003e4.0 mm (reference, leg centred)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuits slot (our guidance)\u003c\/td\u003e\n\u003ctd\u003eApprox. 3.8–4.0 mm wide, at least 4.5 mm deep\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eClass E2\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1:2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength per coil\u003c\/td\u003e\n\u003ctd\u003e25 m, one continuous length\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMaterial and physical properties\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompound\u003c\/td\u003e\n\u003ctd\u003eSolid silicone rubber\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e60 Shore A\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 48-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.15 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eDIN EN ISO 1183-1, method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e11 N\/mm² (11 MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 37, type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e550 %\u003c\/td\u003e\n\u003ctd\u003eISO 37, type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e26 N\/mm (26 kN\/m)\u003c\/td\u003e\n\u003ctd\u003eASTM D624, die B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e31 % after 22 h at 175 °C\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 815-1, type B, method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRebound resilience\u003c\/td\u003e\n\u003ctd\u003e59 %\u003c\/td\u003e\n\u003ctd\u003eISO 4662\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eService conditions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e-50 °C to +180 °C\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eOzone, UV, oxidation, weathering, corona discharge, cosmic and ionising radiation\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSupply\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlack, white, translucent, red, green, blue, yellow\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. weight\u003c\/td\u003e\n\u003ctd\u003eAbout 69 g per metre, 1.7 kg per coil (calculated from the 60 mm² section and density)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit of sale\u003c\/td\u003e\n\u003ctd\u003e1 coil of 25 m (£27.00 per metre inc VAT)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOur part number\u003c\/td\u003e\n\u003ctd\u003eIP-SILT-12X8-\u0026lt;colour\u0026gt;\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThese are the claims the manufacturer makes in writing for this profile. Ask us if your file needs the declaration.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eClaim\u003c\/th\u003e\n\u003cth\u003eWhat it means for you\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA 21 CFR 177.2600\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the US rule for rubber articles in repeated contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEC 1935\/2004\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the EU framework regulation for materials that come into contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWRAS approved material\u003c\/td\u003e\n\u003ctd\u003eThe material is accepted for contact with drinking water in UK water fittings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree from TSE\/BSE by-products\u003c\/td\u003e\n\u003ctd\u003eNo animal-derived ingredients that carry TSE\/BSE risk.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhthalate free\u003c\/td\u003e\n\u003ctd\u003eMade without phthalate plasticisers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe approvals cover the material as supplied. Whether your finished assembly complies also depends on its design, its cleaning regime and the other materials in it, so check it against your own requirements.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my slot?\u003c\/h3\u003e\n\u003cp\u003eMeasure the slot's width and depth. The leg is 4mm wide, so it grips best in a slot of about 3.8–4.0mm. The slot should be at least 4.5mm deep so the head can sit down on the frame; deeper is fine, and the head simply rests on the face. You need about 4mm of flat land either side of the slot for the shoulders. Then check the closed gap: the head stands 3.5mm proud, so the door or lid should close to roughly 2.5–3.2mm from the frame face to squeeze the head without crushing it.\u003c\/p\u003e\n\u003cp\u003eSee the fitting guide in the gallery for a true-proportion section through a fitted seal.\u003c\/p\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAdd up the length of every slot and allow about 5% for trimming and joints. For example, a 600mm × 400mm oven or guard door needs 2.0m, or about 2.1m with the allowance, so one 25m coil seals 11 doors of that size.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClear old seal, grease and grit out of the slot and let it dry\u003c\/li\u003e\n\u003cli\u003eStart partway along a straight side, not at a corner\u003c\/li\u003e\n\u003cli\u003ePress the leg in with your thumb or a small plastic roller as you go. A drop of soapy water helps it slide into a tight slot.\u003c\/li\u003e\n\u003cli\u003eIf the slot is loose or the seal must not move, run a bead of silicone adhesive into the slot first\u003c\/li\u003e\n\u003cli\u003eAt a tight corner, notch the wide head with a 90° V-cut so it folds flat and keep the leg continuous, or cut and butt-join it. Don't stretch it round: stretched silicone shrinks back and opens a gap.\u003c\/li\u003e\n\u003cli\u003eCut the end slightly long with a sharp knife and push the ends together; a dab of silicone adhesive keeps the joint closed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ: frequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat slot does it fit?\u003c\/strong\u003e\u003cbr\u003eA slot about 3.8–4.0mm wide and at least 4.5mm deep. The head is 12mm wide, so it overlaps the slot by 4mm each side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich way up does it go?\u003c\/strong\u003e\u003cbr\u003eThe 4mm leg goes into the slot. The flat 12mm head lies on the frame and its top faces the door, lid or panel it seals against.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow big a gap will it seal?\u003c\/strong\u003e\u003cbr\u003eThe head stands 3.5mm proud of the frame. It seals best when the closed door or lid squeezes it by about 10–30%, so it suits a closed gap of roughly 2.5–3.2mm. For a bigger gap, choose one of our T seals with a deeper head.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it food safe?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states in writing that the compound meets FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact. It is also listed as a WRAS approved material for drinking water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures can it take?\u003c\/strong\u003e\u003cbr\u003eThe working range is -50°C to +180°C. Compression set is 31% after 22 hours at 175°C, so it keeps sealing on hot doors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut it with a sharp utility knife or heavy shears on a cutting board, using a square to keep the cut straight. Butt the ends together, with a little silicone adhesive or RTV if the joint must stay sealed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. Silicone resists UV, ozone and weathering, which crack ordinary rubbers in outdoor and marine use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hard is it?\u003c\/strong\u003e\u003cbr\u003e60 Shore A, a firm silicone, about the feel of a car tyre tread. It holds its shape in the slot but still compresses under a closing door.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you stock every colour?\u003c\/strong\u003e\u003cbr\u003eYes. All seven colours are held in stock at the same price and dispatch with our standard delivery.\u003c\/p\u003e\n\u003cp\u003eNeed help choosing? Call +44 1282 277786 or email \u003ca href=\"mailto:sales@industrial-polymers.co.uk\"\u003esales@industrial-polymers.co.uk\u003c\/a\u003e with your slot and gap sizes.\u003c\/p\u003e\n","brand":"Industrial Polymers","offers":[{"title":"Black","offer_id":56589512245627,"sku":"IP-SILT-12X8-BLACK","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":56589512278395,"sku":"IP-SILT-12X8-WHITE","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Translucent","offer_id":56589512311163,"sku":"IP-SILT-12X8-TRANSLUC","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":56589512343931,"sku":"IP-SILT-12X8-RED","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":56589512376699,"sku":"IP-SILT-12X8-GREEN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":56589512409467,"sku":"IP-SILT-12X8-BLUE","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":56589512442235,"sku":"IP-SILT-12X8-YELLOW","price":675.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-12x8mm-black.png?v=1795307771","url":"https:\/\/industrial-polymers.co.uk\/products\/silicone-t-profile-12mm-x-8mm-head-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}