{"product_id":"silicone-t-seal-profile-3mm-x-6-5mm-25m-coil","title":"Silicone T Seal Profile – 3mm x 6.5mm – 25m Coil","description":"\u003cp\u003eA small, solid silicone T seal for slots about 2mm wide. The 2mm leg pushes into the slot and holds the seal in place; the 3mm head stays proud of the surface and closes the gap against dust, splash, draughts and heat. It comes as one unbroken 25m coil in seven colours, and in two head shapes that share the same 6.5mm overall height and 2mm leg.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare head (Profile A):\u003c\/strong\u003e flat 3.0mm face, 3.5mm deep, for the widest contact area\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTapered head (Profile B):\u003c\/strong\u003e 2.0mm flat face widening to 3.0mm, 3.2mm deep, giving an angled lead-in on one side\u003c\/li\u003e\n\u003cli\u003eBoth: 2.0mm leg, 6.5mm overall, 0.5mm shoulder each side of the leg\u003c\/li\u003e\n\u003cli\u003eSolid silicone rubber, 50 Shore A, working range -50°C to +180°C\u003c\/li\u003e\n\u003cli\u003eCompound stated to meet FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact; WRAS approved material\u003c\/li\u003e\n\u003cli\u003eBlack, white, translucent, red, green, blue or yellow: same size and same price\u003c\/li\u003e\n\u003cli\u003eHeld in stock in both profiles and all colours\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSquare or tapered head: which one?\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e \u003c\/th\u003e\n\u003cth\u003eProfile A: square head\u003c\/th\u003e\n\u003cth\u003eProfile B: tapered head\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003e3.0mm wide × 3.5mm deep, square\u003c\/td\u003e\n\u003ctd\u003e2.0mm flat top, sloping out to 3.0mm, 3.2mm deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg\u003c\/td\u003e\n\u003ctd\u003e2.0mm wide × 3.0mm long\u003c\/td\u003e\n\u003ctd\u003e2.0mm wide × 3.3mm long\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum slot depth\u003c\/td\u003e\n\u003ctd\u003e3.0mm\u003c\/td\u003e\n\u003ctd\u003e3.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypically chosen for\u003c\/td\u003e\n\u003ctd\u003eFlat-faced lids and panels that close straight down onto the seal\u003c\/td\u003e\n\u003ctd\u003eDoors and hatches that swing or slide across the seal, where an angled edge helps them ride on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLid and door seals on catering cabinets, warming units and proving ovens\u003c\/li\u003e\n\u003cli\u003eSlot seals in aluminium extrusion frames, guards and enclosures\u003c\/li\u003e\n\u003cli\u003eInspection hatches and access panels on food and packaging machinery\u003c\/li\u003e\n\u003cli\u003eHVAC access doors and fan coil housings\u003c\/li\u003e\n\u003cli\u003eColour-coded seals for hygiene zones (red, green, blue, yellow)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-3x6-5mm-technical-drawing.png?v=1794989690\" alt=\"Technical drawing of silicone T seal 3mm x 6.5mm: Profile A square head 3.0 x 3.5mm and Profile B tapered head 2.0 to 3.0 x 3.2mm, both with 2.0mm leg and 6.5mm overall height\" width=\"1000\" height=\"745\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\u003ch3\u003eFull specification\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eSolid T section, square head (A) or tapered head (B)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e6.5 mm (both profiles)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead width\u003c\/td\u003e\n\u003ctd\u003e3.0 mm (both profiles)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead depth\u003c\/td\u003e\n\u003ctd\u003eA: 3.5 mm · B: 3.2 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlat face of head\u003c\/td\u003e\n\u003ctd\u003eA: 3.0 mm · B: 2.0 mm, then tapers to 3.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg width\u003c\/td\u003e\n\u003ctd\u003e2.0 mm (both profiles)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg length below head\u003c\/td\u003e\n\u003ctd\u003eA: 3.0 mm · B: 3.3 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eClass E2\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1:2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength per coil\u003c\/td\u003e\n\u003ctd\u003e25 m, one continuous length\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMaterial and physical properties\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompound\u003c\/td\u003e\n\u003ctd\u003eSolid silicone rubber\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e50 Shore A\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 48-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.15 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eDIN EN ISO 1183-1, method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e12 N\/mm² (12 MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 37, type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e640 %\u003c\/td\u003e\n\u003ctd\u003eISO 37, type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e27 N\/mm (27 kN\/m)\u003c\/td\u003e\n\u003ctd\u003eASTM D624, die B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e34 % after 22 h at 175 °C\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 815-1, type B, method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRebound resilience\u003c\/td\u003e\n\u003ctd\u003e58 %\u003c\/td\u003e\n\u003ctd\u003eISO 4662\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eService conditions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e-50 °C to +180 °C\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eOzone, UV, oxidation, weathering, corona discharge, cosmic and ionising radiation\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSupply\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlack, white, translucent, red, green, blue, yellow\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit of sale\u003c\/td\u003e\n\u003ctd\u003e1 coil of 25 m (£27.00 per metre inc VAT)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\u003cp\u003eThese are the claims the manufacturer makes in writing for this exact profile and compound. Ask us for the certificate or declaration your file needs.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eClaim\u003c\/th\u003e\n\u003cth\u003eWhat it means for you\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA 21 CFR 177.2600\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the US rule for rubber articles in repeated contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEC 1935\/2004\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the EU framework regulation for materials that come into contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWRAS approved material\u003c\/td\u003e\n\u003ctd\u003eThe material is accepted for contact with drinking water in UK water fittings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree from TSE\/BSE by-products\u003c\/td\u003e\n\u003ctd\u003eNo animal-derived ingredients that carry TSE\/BSE risk.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhthalate free\u003c\/td\u003e\n\u003ctd\u003eMade without phthalate plasticisers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eApprovals cover the material as supplied. Whether your finished assembly complies also depends on its design, cleaning regime and the other materials in it, so check against your own requirements.\u003c\/p\u003e\u003ch3\u003eWill it fit my slot?\u003c\/h3\u003e\u003cp\u003eMeasure the slot width and depth. The leg is 2.0mm wide, so it grips best in a slot of about 1.8–2.0mm. The slot needs to be at least 3.0mm deep for the square head or 3.3mm for the tapered head, so that the head sits down flat on the surface. In a slot that is slightly wide, run a thin bead of silicone adhesive along the bottom first so the leg cannot work loose.\u003c\/p\u003e\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\u003cp\u003eAdd up the length of every slot and allow about 5% for trimming and joints. Example: a cabinet door with a 400mm × 300mm seal track needs 1.4m, or about 1.5m with allowance, so one 25m coil seals 16 doors.\u003c\/p\u003e\u003ch3\u003eFitting tips\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear old seal, grease and grit out of the slot and let it dry\u003c\/li\u003e\n\u003cli\u003eStart partway along a straight side, not at a corner\u003c\/li\u003e\n\u003cli\u003ePress the leg in with your thumb or a small plastic roller as you go\u003c\/li\u003e\n\u003cli\u003eLay the seal into corners rather than pulling it round: stretched silicone shrinks back and opens a gap\u003c\/li\u003e\n\u003cli\u003eCut slightly long with a sharp knife and push the ends together; a dab of silicone adhesive keeps the joint closed\u003c\/li\u003e\n\u003cli\u003eFor the tapered head, face the sloping side towards the edge that closes onto it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ: frequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the two profiles?\u003c\/strong\u003e\u003cbr\u003eOnly the head. Profile A has a square 3.0 × 3.5mm head with a flat top. Profile B has a 2.0mm flat top that slopes out to 3.0mm, 3.2mm deep. The leg, overall height, material and price are the same. See the drawing above.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich way up does it go?\u003c\/strong\u003e\u003cbr\u003eThe leg goes into the slot and the head sits on the surface. With the tapered head, the sloping side is the lead-in edge, so face it towards the door or panel that closes onto it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be used inside an oven?\u003c\/strong\u003e\u003cbr\u003eIt is rated to +180°C continuous. It suits door frames, cabinet lids and warming or proving equipment where the seal stays at or below that temperature. For hotter positions, ask us about a higher-rated profile.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it safe near food or drinking water?\u003c\/strong\u003e\u003cbr\u003eThe compound is stated to meet FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact, and it is a WRAS approved material. We can send the declaration if your audit needs it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow accurate are the dimensions?\u003c\/strong\u003e\u003cbr\u003eThe profile is extruded to ISO 3302-1 class E2, the normal tolerance class for extruded rubber sections. Check your slot against the drawing before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it flatten over time?\u003c\/strong\u003e\u003cbr\u003eSilicone recovers well. This compound has a compression set of 34% after 22 hours at 175°C and 58% rebound resilience, so it keeps pushing back through repeated heat cycles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat glue works with it?\u003c\/strong\u003e\u003cbr\u003eUse a silicone adhesive or silicone sealant. Most general-purpose glues and contact adhesives will not bond to silicone rubber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy a shorter length?\u003c\/strong\u003e\u003cbr\u003eThis listing is a full 25m coil. For a cut length or a large quantity, contact us for a quote.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs every colour the same price?\u003c\/strong\u003e\u003cbr\u003eYes. All seven colours and both head shapes are £675.00 per 25m coil inc VAT, so you can colour-code by area at no extra cost.\u003c\/p\u003e\u003ch3\u003eComplete your project\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-4mm-x-6-5mm-25m-coil\"\u003eSilicone T Seal Profile – 4mm x 6.5mm (for slightly wider slots)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-section-seal-10mm-x-10mm-25m-roll\"\u003eSilicone T-Section Seal – 10mm x 10mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-round-u-channel-3mm-x-5mm-25m-coil\"\u003eSilicone Round U Channel – 3mm x 5mm\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNot sure which head shape suits your slot? Send us a photo or the slot size and we will check it for you. \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Square head \/ Black","offer_id":56588838666619,"sku":"IP-SITS-3X6.5-SQ-25M-BLK","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Square head \/ White","offer_id":56588838699387,"sku":"IP-SITS-3X6.5-SQ-25M-WHT","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Square head \/ Translucent","offer_id":56588838732155,"sku":"IP-SITS-3X6.5-SQ-25M-TRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Square head \/ Red","offer_id":56588838764923,"sku":"IP-SITS-3X6.5-SQ-25M-RED","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Square head \/ Green","offer_id":56588838797691,"sku":"IP-SITS-3X6.5-SQ-25M-GRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Square head \/ Blue","offer_id":56588838830459,"sku":"IP-SITS-3X6.5-SQ-25M-BLU","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Square head \/ Yellow","offer_id":56588838863227,"sku":"IP-SITS-3X6.5-SQ-25M-YEL","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Tapered head \/ Black","offer_id":56588838895995,"sku":"IP-SITS-3X6.5-TP-25M-BLK","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Tapered head \/ White","offer_id":56588838928763,"sku":"IP-SITS-3X6.5-TP-25M-WHT","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Tapered head \/ Translucent","offer_id":56588838961531,"sku":"IP-SITS-3X6.5-TP-25M-TRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Tapered head \/ Red","offer_id":56588838994299,"sku":"IP-SITS-3X6.5-TP-25M-RED","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Tapered head \/ Green","offer_id":56588839027067,"sku":"IP-SITS-3X6.5-TP-25M-GRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Tapered head \/ Blue","offer_id":56588839059835,"sku":"IP-SITS-3X6.5-TP-25M-BLU","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Tapered head \/ Yellow","offer_id":56588839092603,"sku":"IP-SITS-3X6.5-TP-25M-YEL","price":675.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-3x6-5mm-square-head-black.png?v=1794989690","url":"https:\/\/industrial-polymers.co.uk\/products\/silicone-t-seal-profile-3mm-x-6-5mm-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}