{"product_id":"silicone-t-seal-profile-4mm-x-8-5mm-25m-coil","title":"Silicone T Seal Profile – 4mm x 8.5mm – 25m Coil","description":"\u003cp\u003eA solid silicone T seal with a 2.2mm leg and a 4mm-wide head, made for narrow slots at least 5.5mm deep. The leg pushes into the slot and grips its walls, and the head sits on the surface to close the gap against dust, splash, draughts and heat. You can choose a \u003cstrong\u003esquare head\u003c\/strong\u003e or a \u003cstrong\u003echamfered head\u003c\/strong\u003e, in any of seven colours. Every option is the same price, and each coil is one unbroken 25m length.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHead 4.0mm wide × 3.0mm deep; leg 2.2mm wide; 8.5mm overall height (5.5mm leg below the head)\u003c\/li\u003e\n\u003cli\u003eTwo head shapes: square, or chamfered with a 3.0mm flat top and an angled edge on one side\u003c\/li\u003e\n\u003cli\u003e0.9mm shoulder each side of the leg, so the head covers the slot edges\u003c\/li\u003e\n\u003cli\u003eSolid silicone rubber, 60 Shore A, working range -50°C to +180°C\u003c\/li\u003e\n\u003cli\u003eThe manufacturer states the compound meets FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact. It is a WRAS approved material.\u003c\/li\u003e\n\u003cli\u003eBlack, white, translucent, red, green, blue or yellow, all at the same price\u003c\/li\u003e\n\u003cli\u003eHeld in stock in every colour and both head shapes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSquare or chamfered head: which do I need?\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eSquare head\u003c\/th\u003e\n\u003cth\u003eChamfered head\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead shape\u003c\/td\u003e\n\u003ctd\u003eFull 4.0 × 3.0mm block with square corners\u003c\/td\u003e\n\u003ctd\u003e3.0mm flat top, then an angled edge down to the 4.0mm full width on one side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSealing face\u003c\/td\u003e\n\u003ctd\u003eFlat 4.0mm face\u003c\/td\u003e\n\u003ctd\u003eFlat 3.0mm face plus a sloping edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003eDoors, lids and panels that close straight down onto the seal\u003c\/td\u003e\n\u003ctd\u003ePanels that slide or swing across the seal, where the angled edge acts as a lead-in. Also suits frames with a bevelled or rounded corner.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting\u003c\/td\u003e\n\u003ctd\u003eEither way round\u003c\/td\u003e\n\u003ctd\u003eFit the angled edge facing the direction the panel comes from\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg, slot size, material, price\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIdentical: 2.2mm leg, 8.5mm overall, 60 Shore A silicone, £675.00 per 25m coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eReplacing an old seal? Look at its cut end. If the top is square, order Square. If one top corner is cut away at an angle, order Chamfered.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSlot seals in aluminium profile frames for machine guards and enclosures\u003c\/li\u003e\n\u003cli\u003eAccess doors on air handling units, fan coil housings and ductwork\u003c\/li\u003e\n\u003cli\u003eInspection hatches on food, bakery and packaging machinery\u003c\/li\u003e\n\u003cli\u003eLids and doors on warming cabinets, provers and drying ovens up to +180°C\u003c\/li\u003e\n\u003cli\u003eColour-coded seals for hygiene zones (red, green, blue, yellow)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-4x8-5mm-technical-drawing.png?v=1794992454\" alt=\"Technical drawing of silicone T seal 4mm x 8.5mm in square and chamfered head versions: 4.0 x 3.0mm head, 2.2mm leg, 8.5mm overall height, 3.0mm flat top on the chamfered head\" width=\"1000\" height=\"940\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\u003ch3\u003eFull specification\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eSolid T section; square or chamfered head\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e8.5 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead width (overall)\u003c\/td\u003e\n\u003ctd\u003e4.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead depth\u003c\/td\u003e\n\u003ctd\u003e3.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlat top width, chamfered head\u003c\/td\u003e\n\u003ctd\u003e3.0 mm (chamfer on one side only)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg width (base thickness)\u003c\/td\u003e\n\u003ctd\u003e2.2 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg length below head\u003c\/td\u003e\n\u003ctd\u003e5.5 mm (reference)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulder each side\u003c\/td\u003e\n\u003ctd\u003e0.9 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuits slot\u003c\/td\u003e\n\u003ctd\u003eApprox. 2.0–2.2 mm wide, at least 5.5 mm deep\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eClass E2\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1:2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength per coil\u003c\/td\u003e\n\u003ctd\u003e25 m, one continuous length\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMaterial and physical properties\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompound\u003c\/td\u003e\n\u003ctd\u003eSolid silicone rubber\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e60 Shore A\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 48-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.15 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eDIN EN ISO 1183-1, method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e11 N\/mm² (11 MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 37, type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e550 %\u003c\/td\u003e\n\u003ctd\u003eISO 37, type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e26 N\/mm (26 kN\/m)\u003c\/td\u003e\n\u003ctd\u003eASTM D624, die B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e31 % after 22 h at 175 °C\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 815-1, type B, method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRebound resilience\u003c\/td\u003e\n\u003ctd\u003e59 %\u003c\/td\u003e\n\u003ctd\u003eISO 4662\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eService conditions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e-50 °C to +180 °C\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eOzone, UV, oxidation, weathering, corona discharge, cosmic and ionising radiation\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSupply\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead shapes\u003c\/td\u003e\n\u003ctd\u003eSquare, chamfered\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlack, white, translucent, red, green, blue, yellow\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. weight\u003c\/td\u003e\n\u003ctd\u003eAbout 28 g per metre for the square head, slightly less for the chamfered head (calculated from section and density)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit of sale\u003c\/td\u003e\n\u003ctd\u003e1 coil of 25 m (£27.00 per metre inc VAT)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\u003cp\u003eThese are the claims the manufacturer makes in writing for this exact profile and compound. Ask us if your file needs the certificate or declaration.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eClaim\u003c\/th\u003e\n\u003cth\u003eWhat it means for you\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA 21 CFR 177.2600\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the US rule for rubber articles in repeated contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEC 1935\/2004\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the EU framework regulation for materials that come into contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWRAS approved material\u003c\/td\u003e\n\u003ctd\u003eThe material is accepted for contact with drinking water in UK water fittings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree from TSE\/BSE by-products\u003c\/td\u003e\n\u003ctd\u003eNo animal-derived ingredients that carry TSE\/BSE risk.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhthalate free\u003c\/td\u003e\n\u003ctd\u003eMade without phthalate plasticisers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThe approvals cover the material as supplied. Whether your finished assembly complies also depends on its design, its cleaning regime and the other materials in it, so check it against your own requirements.\u003c\/p\u003e\u003ch3\u003eWill it fit my slot?\u003c\/h3\u003e\u003cp\u003eMeasure the slot's width and depth. The leg is 2.2mm wide, so it grips best in a slot of about 2.0–2.2mm. The slot must be at least 5.5mm deep so the head can sit down flat; a deeper slot is fine. If your slot is 1.8–2.0mm wide, the 3.8mm × 7.7mm T seal with a 2.0mm leg is a closer fit. If it is shallower than 5.5mm, choose one of our shorter-leg T seals.\u003c\/p\u003e\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\u003cp\u003eAdd up the length of every slot and allow about 5% for trimming and joints. For example, a 600mm × 400mm guard door needs 2.0m, or about 2.1m with the allowance, so one 25m coil seals 11 doors of that size.\u003c\/p\u003e\u003ch3\u003eFitting tips\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear any old seal, grease and grit out of the slot, and let it dry\u003c\/li\u003e\n\u003cli\u003eStart partway along a straight side, not at a corner\u003c\/li\u003e\n\u003cli\u003ePress the leg in with your thumb or a small plastic roller as you go\u003c\/li\u003e\n\u003cli\u003eChamfered head: keep the angled edge on the same side all the way round\u003c\/li\u003e\n\u003cli\u003eLay the seal into corners rather than pulling it round them. Stretched silicone shrinks back and opens a gap.\u003c\/li\u003e\n\u003cli\u003eCut the end slightly long with a sharp knife and push the ends together; a dab of silicone adhesive keeps the joint closed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ: frequently asked questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat slot does it fit?\u003c\/strong\u003e\u003cbr\u003eA slot about 2.0–2.2mm wide and at least 5.5mm deep. The head is 4.0mm wide, so it overlaps the slot by 0.9mm each side and covers the edges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the square and chamfered head?\u003c\/strong\u003e\u003cbr\u003eOnly the head. The square head is a full 4 × 3mm block. The chamfered head has a 3mm flat top with one corner angled away. The leg, height, material and price are the same.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich way up does it go?\u003c\/strong\u003e\u003cbr\u003eThe 2.2mm leg goes into the slot, and the wider head sits on the surface, facing the door, lid or panel it seals against.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be used near ovens and heaters?\u003c\/strong\u003e\u003cbr\u003eIt is rated to +180°C continuous. That suits oven and warming-cabinet doors, drying equipment and heater housings, as long as the seal itself stays at or below that temperature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it safe near food or drinking water?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states the compound meets FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact, and it is a WRAS approved material. We can send the declaration if your audit needs it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow accurate are the dimensions?\u003c\/strong\u003e\u003cbr\u003eThe profile is extruded to ISO 3302-1 class E2, the normal tolerance class for extruded rubber sections. Check your slot against the drawing before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it flatten over time?\u003c\/strong\u003e\u003cbr\u003eSilicone recovers well. This compound has a compression set of 31% after 22 hours at 175°C and a rebound resilience of 59%, so it keeps its seal through repeated heat cycles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut it with a sharp knife or shears. To join it, use a silicone adhesive or silicone sealant; most general-purpose glues and contact adhesives will not bond to silicone rubber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs every option the same price?\u003c\/strong\u003e\u003cbr\u003eYes. Both head shapes in all seven colours cost £675.00 per 25m coil inc VAT (£27.00 per metre).\u003c\/p\u003e\u003ch3\u003eComplete your project\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-3-8mm-x-7-7mm-25m-coil\"\u003eSilicone T Seal Profile – 3.8mm x 7.7mm (2.0mm leg)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-3-6mm-x-8-6mm-25m-coil\"\u003eSilicone T Seal Profile – 3.6mm x 8.6mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-4mm-x-6-5mm-25m-coil\"\u003eSilicone T Seal Profile – 4mm x 6.5mm (shorter leg)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNot sure it will fit? Send us a photo, or the width and depth of the slot, and we will check it for you. \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Square \/ Black","offer_id":56588871172475,"sku":"IP-SITS-4X8.5-SQ-25M-BLK","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Square \/ White","offer_id":56588871205243,"sku":"IP-SITS-4X8.5-SQ-25M-WHT","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Square \/ Translucent","offer_id":56588871238011,"sku":"IP-SITS-4X8.5-SQ-25M-TRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Square \/ Red","offer_id":56588871270779,"sku":"IP-SITS-4X8.5-SQ-25M-RED","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Square \/ Green","offer_id":56588871303547,"sku":"IP-SITS-4X8.5-SQ-25M-GRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Square \/ Blue","offer_id":56588871336315,"sku":"IP-SITS-4X8.5-SQ-25M-BLU","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Square \/ Yellow","offer_id":56588871369083,"sku":"IP-SITS-4X8.5-SQ-25M-YEL","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Chamfered \/ Black","offer_id":56588871401851,"sku":"IP-SITS-4X8.5-CH-25M-BLK","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Chamfered \/ White","offer_id":56588871434619,"sku":"IP-SITS-4X8.5-CH-25M-WHT","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Chamfered \/ Translucent","offer_id":56588871467387,"sku":"IP-SITS-4X8.5-CH-25M-TRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Chamfered \/ Red","offer_id":56588871500155,"sku":"IP-SITS-4X8.5-CH-25M-RED","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Chamfered \/ Green","offer_id":56588871532923,"sku":"IP-SITS-4X8.5-CH-25M-GRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Chamfered \/ Blue","offer_id":56588871565691,"sku":"IP-SITS-4X8.5-CH-25M-BLU","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Chamfered \/ Yellow","offer_id":56588871598459,"sku":"IP-SITS-4X8.5-CH-25M-YEL","price":675.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-4x8-5mm-sq-black.png?v=1794992454","url":"https:\/\/industrial-polymers.co.uk\/products\/silicone-t-seal-profile-4mm-x-8-5mm-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}