{"product_id":"silicone-t-seal-profile-5mm-x-5mm-1-5mm-head-25m-coil","title":"Silicone T Seal Profile – 5mm x 5mm, 1.5mm Head, 3.1mm Leg – 25m Coil","description":"\u003cp\u003eA low-profile push-fit groove seal with a wide, flat sealing face. This silicone T seal profile is a solid 5mm x 5mm extrusion with a \u003cstrong\u003eslim flat head\u003c\/strong\u003e (5mm wide, only 1.5mm deep) on a \u003cstrong\u003ewide 3.1mm leg\u003c\/strong\u003e. Press the leg into a slot in your frame and the head stands just 1.5mm proud, so the seal suits tight closing gaps where a deeper head would stop the door or lid shutting. The broad leg gives a strong grip in the slot and resists rolling. Medium 60 Shore A silicone, supplied as one continuous 25m coil in seven colours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e£675.00 inc VAT per 25m coil, which is £27.00 per metre.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTwo 5mm x 5mm T seals are made. This one has the thin 1.5mm head and 3.1mm leg. If you need more compression travel, see the \u003ca href=\"\/products\/silicone-t-seal-profile-5mm-x-5mm-2-5mm-head-25m-coil\"\u003e5mm x 5mm T seal with a 2.5mm head, 2mm leg, soft 50 Shore A\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlat head 5.0mm wide and 1.5mm deep\u003c\/li\u003e\n\u003cli\u003eLeg 3.1mm wide and 3.5mm long: a push fit in a slot about 2.9–3.1mm wide and at least 3.5mm deep\u003c\/li\u003e\n\u003cli\u003eOverall height 5.0mm; the head stands 1.5mm proud of the frame before compression\u003c\/li\u003e\n\u003cli\u003eSolid silicone rubber, 60 Shore A, with 550% elongation and 59% rebound\u003c\/li\u003e\n\u003cli\u003eWorks from -50°C to +180°C without hardening or going brittle\u003c\/li\u003e\n\u003cli\u003eFood-contact compound (FDA 21 CFR 177.2600 and EC 1935\/2004) and WRAS approved material\u003c\/li\u003e\n\u003cli\u003e25m coil in black, white, translucent, red, green, blue or yellow, all the same price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClose-fitting lids, guards and inspection hatches on food processing and packaging machinery\u003c\/li\u003e\n\u003cli\u003eOven, warming cabinet and drying room doors where the closed gap is only about 1mm\u003c\/li\u003e\n\u003cli\u003eHVAC access panels and enclosure doors with a 3mm sealing slot\u003c\/li\u003e\n\u003cli\u003eGlazing and panel infill seals in aluminium or stainless frames where a flush finish matters\u003c\/li\u003e\n\u003cli\u003eColour-coded seals for hygiene zones (blue, green, yellow, red)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-5x5mm-a-technical-drawing.png\" alt=\"Technical drawing of silicone T seal 5mm x 5mm with 1.5mm head and 3.1mm leg, all dimensions in mm\" width=\"1000\" height=\"1220\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFull specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eSolid T section, square-cut flat head, straight leg\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (head)\u003c\/td\u003e\n\u003ctd\u003e5.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e5.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead depth\u003c\/td\u003e\n\u003ctd\u003e1.5 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg (base) width\u003c\/td\u003e\n\u003ctd\u003e3.1 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg length below head\u003c\/td\u003e\n\u003ctd\u003e3.5 mm (reference, 5.0 − 1.5)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulder each side\u003c\/td\u003e\n\u003ctd\u003e0.95 mm (reference, (5.0 − 3.1) ÷ 2, leg centred)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuggested slot\u003c\/td\u003e\n\u003ctd\u003eAbout 2.9–3.1 mm wide, at least 3.5 mm deep\u003c\/td\u003e\n\u003ctd\u003eGuidance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eClass E2\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1:2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength per coil\u003c\/td\u003e\n\u003ctd\u003e25 m, one continuous length\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMaterial and physical properties\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSolid silicone rubber\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e60 Shore A\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 48-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.15 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eDIN EN ISO 1183-1 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e11 N\/mm² (11 MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 37 Type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e550 %\u003c\/td\u003e\n\u003ctd\u003eISO 37 Type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e26 N\/mm\u003c\/td\u003e\n\u003ctd\u003eASTM D624 B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e31 % after 22 h at 175 °C\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 815-1 Type B, Method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRebound resilience\u003c\/td\u003e\n\u003ctd\u003e59 %\u003c\/td\u003e\n\u003ctd\u003eISO 4662\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eService conditions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e-50 °C to +180 °C\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eOzone, UV, oxidation, weathering, corona discharge, cosmic and ionising radiation\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSupply\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlack, white, translucent, red, green, blue, yellow (same profile and price)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit of sale\u003c\/td\u003e\n\u003ctd\u003e1 coil of 25 m (£27.00 per metre)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApproximate weight\u003c\/td\u003e\n\u003ctd\u003eAbout 0.53 kg per 25 m coil (calculated from section area and density)\u003c\/td\u003e\n\u003ctd\u003eCalculated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterials and compliance claims\u003c\/h3\u003e\n\u003cp\u003eThese are the claims the manufacturer states for this exact profile and compound. Ask us for the certificate or declaration you need for your technical file.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eClaim\u003c\/th\u003e\n\u003cth\u003eWhat it means for you\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA 21 CFR 177.2600\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the US rule for rubber articles intended for repeated contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEC 1935\/2004\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the EU framework regulation for materials intended to come into contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWRAS approved material\u003c\/td\u003e\n\u003ctd\u003eThe material is listed as suitable for contact with drinking water in UK water fittings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree from TSE\/BSE by-products\u003c\/td\u003e\n\u003ctd\u003eNo animal-derived ingredients that carry TSE\/BSE risk.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhthalate free\u003c\/td\u003e\n\u003ctd\u003eMade without phthalate plasticisers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eApprovals apply to the material as supplied. Whether a finished assembly complies also depends on your design, cleaning regime and other materials, so check against your own requirements.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my groove?\u003c\/h3\u003e\n\u003cp\u003eThis profile is made for a \u003cstrong\u003estraight-sided slot\u003c\/strong\u003e about 2.9–3.1mm wide and at least 3.5mm deep. A slot a little narrower than the 3.1mm leg gives a firm grip fit; a slot the same width or slightly wider will still hold, but add a thin bead of silicone adhesive along the bottom. The 5mm head overhangs the slot by about 0.95mm on each side, so the frame needs at least that much flat land either side of the slot for the shoulders to sit on.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-5x5mm-a-installation.png\" alt=\"Installation section: 5mm x 5mm silicone T seal pushed into a 3.1mm frame slot, flat head standing 1.5mm proud under a closing lid\" width=\"1000\" height=\"1100\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eMeasure every slot and add about 5% for trimming and joints. Example: an oven door with a 600mm x 450mm groove needs 2.1m, so one 25m coil does about 11 doors with allowance.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean old seal and debris out of the slot and let it dry\u003c\/li\u003e\n\u003cli\u003eStart in the middle of a long side, not at a corner\u003c\/li\u003e\n\u003cli\u003ePress the leg in with your thumb or a plastic roller until the shoulders sit flat on the frame\u003c\/li\u003e\n\u003cli\u003eDo not stretch the seal as you go: stretched silicone shrinks back and opens gaps at the joints\u003c\/li\u003e\n\u003cli\u003eCut slightly long with a sharp knife or shears and push the ends together for a tight butt joint; a dab of silicone adhesive keeps it closed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ: frequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhich way up does it go?\u003c\/strong\u003e\u003cbr\u003eThe 3.1mm leg goes into the slot. The flat 5mm face of the head faces outwards, towards the door, lid or panel that closes onto it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow big a gap does it close?\u003c\/strong\u003e\u003cbr\u003eThe head stands 1.5mm proud of the frame. For a reliable seal, design for roughly 20–30% squeeze of the head, so a closed gap of about 1.05–1.2mm between the frame and the closing face. If your gap is nearer 2mm, choose the 2.5mm-head version instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat slot size do I need?\u003c\/strong\u003e\u003cbr\u003eA straight slot about 2.9–3.1mm wide and at least 3.5mm deep. Check your slot against the drawing before ordering, or send us the dimensions and we will check it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the two 5mm x 5mm T seals?\u003c\/strong\u003e\u003cbr\u003eBoth are 5mm wide and 5mm tall. This one has a thin 1.5mm head on a wide 3.1mm leg in 60 Shore A, for tight gaps and wide slots. The other has a deeper 2.5mm head on a narrow 2mm leg in softer 50 Shore A, for bigger gaps, narrow slots and lower closing force.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it survive heat?\u003c\/strong\u003e\u003cbr\u003eIt is rated from -50°C to +180°C, so it suits ovens, warming cabinets, dryers and machinery that runs hot, as well as cold stores.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it safe near food or drinking water?\u003c\/strong\u003e\u003cbr\u003eYes. The compound is stated to meet FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact, and it is a WRAS approved material. Ask for the certificate if your audit needs it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut square with a sharp knife or shears. Butt the ends together and bond with a silicone adhesive; at corners you can run the seal round in one piece if the slot radius allows, or mitre and bond it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow tight are the dimensions?\u003c\/strong\u003e\u003cbr\u003eThe profile is extruded to ISO 3302-1 class E2, a standard tolerance class for extruded rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I order a shorter length or a different colour mix?\u003c\/strong\u003e\u003cbr\u003eThis listing is a full 25m coil in one colour. For cut lengths, mixed colours or larger quantities, contact us for a quote.\u003c\/p\u003e\n\u003ch3\u003eComplete your project\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-5mm-x-5mm-2-5mm-head-25m-coil\"\u003eSilicone T Seal Profile – 5mm x 5mm, 2.5mm head, 2mm leg (softer 50 Shore A)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-4mm-x-5mm-25m-coil\"\u003eSilicone T Seal Profile – 4mm x 5mm (narrower head)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-4-5mm-x-5-8mm-25m-coil\"\u003eSilicone T Seal Profile – 4.5mm x 5.8mm (domed head)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure this profile matches your slot? Send us a photo or the slot dimensions and we will check it. \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Black","offer_id":56588956139899,"sku":"IP-SITS-5X5-H1.5-25M-BLK","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":56588956172667,"sku":"IP-SITS-5X5-H1.5-25M-WHT","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Translucent","offer_id":56588956205435,"sku":"IP-SITS-5X5-H1.5-25M-TRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":56588956238203,"sku":"IP-SITS-5X5-H1.5-25M-RED","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":56588956270971,"sku":"IP-SITS-5X5-H1.5-25M-GRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":56588956303739,"sku":"IP-SITS-5X5-H1.5-25M-BLU","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":56588956336507,"sku":"IP-SITS-5X5-H1.5-25M-YEL","price":675.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-5x5mm-a-black.png?v=1794995040","url":"https:\/\/industrial-polymers.co.uk\/products\/silicone-t-seal-profile-5mm-x-5mm-1-5mm-head-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}