{"product_id":"silicone-t-seal-profile-6-1mm-x-5mm-25m-coil","title":"Silicone T Seal Profile – 6.1mm x 5mm – 80 Shore A – 25m Coil","description":"\u003cp\u003eA hard-wearing, low-profile push-fit seal for narrow slots. This silicone T seal profile is a solid 6.1mm x 5mm extrusion with a \u003cstrong\u003esquare-edged flat head\u003c\/strong\u003e (6.1mm wide, 2mm deep) on a \u003cstrong\u003e2.1mm wide, 3mm long leg\u003c\/strong\u003e. The short leg suits shallow slots where a longer leg will not seat, the head stands 2mm proud to give the closing face a 6.1mm contact band, and the 2mm shoulders cover the frame either side. At \u003cstrong\u003e80 Shore A\u003c\/strong\u003e it is one of the firmest silicones in our T seal range: it keeps a crisp, square line, resists scuffing and tearing where parts slide or rub, and stays put without rolling out of the slot. Supplied as one continuous 25m coil in seven colours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e£675.00 inc VAT per 25m coil, which is £27.00 per metre.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlat head 6.1mm wide and 2mm deep, square edges, 2mm shoulder each side of the leg\u003c\/li\u003e\n\u003cli\u003eLeg 2.1mm wide and 3mm long: a push fit in a slot about 1.9–2.1mm wide and at least 3mm deep\u003c\/li\u003e\n\u003cli\u003eOverall height 5mm; the head stands 2mm proud of the frame before compression\u003c\/li\u003e\n\u003cli\u003eFirm solid silicone, 80 Shore A, with 10 N\/mm² tensile strength and 28 N\/mm tear strength\u003c\/li\u003e\n\u003cli\u003eWorks from -50°C to +180°C without hardening or going brittle\u003c\/li\u003e\n\u003cli\u003eFood-contact compound (FDA 21 CFR 177.2600 and EC 1935\/2004) and WRAS approved material\u003c\/li\u003e\n\u003cli\u003e25m coil in black, white, translucent, red, green, blue or yellow, all the same price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEdge and joint seals on food processing, catering and brewing equipment\u003c\/li\u003e\n\u003cli\u003eWear strips and buffer seals where a panel slides or rubs against the head\u003c\/li\u003e\n\u003cli\u003eOven, dryer and heated cabinet panels that run hot all day\u003c\/li\u003e\n\u003cli\u003eHVAC ducting panels, furnace enclosures and heated housings\u003c\/li\u003e\n\u003cli\u003eInfill and glazing seals in shallow-slotted aluminium or stainless frames\u003c\/li\u003e\n\u003cli\u003eColour-coded seals for hygiene zones (blue, green, yellow, red)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-6-1x5mm-technical-drawing.png\" alt=\"Technical drawing of silicone T seal 6.1mm x 5mm cross-section with all dimensions in mm\" width=\"1000\" height=\"1220\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFull specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eSolid T section, flat square-edged head, straight leg\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (head)\u003c\/td\u003e\n\u003ctd\u003e6.1 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e5.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead depth\u003c\/td\u003e\n\u003ctd\u003e2.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg (base) width\u003c\/td\u003e\n\u003ctd\u003e2.1 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg length below head\u003c\/td\u003e\n\u003ctd\u003e3.0 mm (reference, 5.0 − 2.0)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulder overhang each side\u003c\/td\u003e\n\u003ctd\u003e2.0 mm (reference, (6.1 − 2.1) ÷ 2)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuggested slot\u003c\/td\u003e\n\u003ctd\u003eAbout 1.9–2.1 mm wide, at least 3 mm deep\u003c\/td\u003e\n\u003ctd\u003eGuidance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eExtrusion tolerance to ISO 3302-1:2014\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1:2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength per coil\u003c\/td\u003e\n\u003ctd\u003e25 m, one continuous length\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMaterial and physical properties\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSolid silicone rubber\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e80 Shore A\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 48-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.20 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eDIN EN ISO 1183-1 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e10 N\/mm² (10 MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 37 Type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e440 %\u003c\/td\u003e\n\u003ctd\u003eISO 37 Type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e28 N\/mm\u003c\/td\u003e\n\u003ctd\u003eASTM D624 B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e78 % after 22 h at 175 °C\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 815-1 Type B, Method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRebound resilience\u003c\/td\u003e\n\u003ctd\u003e54 %\u003c\/td\u003e\n\u003ctd\u003eISO 4662\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eService conditions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e-50 °C to +180 °C\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eOzone, UV, oxidation, weathering, corona discharge, cosmic and ionising radiation\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSupply\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlack, white, translucent, red, green, blue, yellow (same profile and price)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit of sale\u003c\/td\u003e\n\u003ctd\u003e1 coil of 25 m (£27.00 per metre)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApproximate weight\u003c\/td\u003e\n\u003ctd\u003eAbout 0.55 kg per coil (calculated from cross-section and density)\u003c\/td\u003e\n\u003ctd\u003eCalculated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterials and compliance claims\u003c\/h3\u003e\n\u003cp\u003eThese are the claims the manufacturer states for this exact profile and compound. Ask us for the certificate or declaration you need for your technical file.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eClaim\u003c\/th\u003e\n\u003cth\u003eWhat it means for you\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA 21 CFR 177.2600\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the US rule for rubber articles intended for repeated contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEC 1935\/2004\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the EU framework regulation for materials intended to come into contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWRAS approved material\u003c\/td\u003e\n\u003ctd\u003eThe material is listed as suitable for contact with drinking water in UK water fittings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree from TSE\/BSE by-products\u003c\/td\u003e\n\u003ctd\u003eNo animal-derived ingredients that carry TSE\/BSE risk.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhthalate free\u003c\/td\u003e\n\u003ctd\u003eMade without phthalate plasticisers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eApprovals apply to the material as supplied. Whether a finished assembly complies also depends on your design, cleaning regime and other materials, so check against your own requirements.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my groove?\u003c\/h3\u003e\n\u003cp\u003eThis profile is made for a \u003cstrong\u003enarrow, straight-sided, shallow slot\u003c\/strong\u003e about 1.9–2.1mm wide and at least 3mm deep. Because 80 Shore A silicone is firm, it does not squeeze down much: a slot much narrower than 1.9mm will be hard to fill, and in a slot of 2.1mm or wider you should add a thin bead of silicone adhesive along the bottom. If your slot is deeper than 3mm that is fine; the shoulders sit on the frame and set the height. The frame needs at least 2mm of flat land either side of the slot for the shoulders to sit on.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-6-1x5mm-installation.png\" alt=\"Installation section: silicone T seal 6.1mm x 5mm with its 3 mm leg pushed into a frame slot, flat head standing 2 mm proud under a closing lid\" width=\"1000\" height=\"1100\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eMeasure every slot and add about 5% for trimming and joints. Example: a panel with a 600mm x 450mm groove needs 2.1m, so one 25m coil does about 11 panels with allowance.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean old seal and debris out of the slot and let it dry\u003c\/li\u003e\n\u003cli\u003eStart in the middle of a long side, not at a corner\u003c\/li\u003e\n\u003cli\u003ePress the leg in with a plastic roller or the flat of a tool until the shoulders sit flat on the frame along the whole run (firm 80 Shore A needs more push than a soft seal)\u003c\/li\u003e\n\u003cli\u003eDo not stretch the seal as you go: stretched silicone shrinks back and opens gaps at the joints\u003c\/li\u003e\n\u003cli\u003eCut slightly long with a sharp knife or shears and push the ends together for a tight butt joint; a dab of silicone adhesive keeps it closed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ: frequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhich way up does it go?\u003c\/strong\u003e\u003cbr\u003eThe 2.1mm leg goes into the slot. The flat 6.1mm face of the head faces outwards, towards the door, lid or panel that closes onto it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow big a gap does it close?\u003c\/strong\u003e\u003cbr\u003eThe head stands 2mm proud of the frame. A firm 80 Shore A seal is best used with light squeeze: as a guide, about 10–15% of the head, which is a closed gap of roughly 1.7–1.8mm between the frame and the closing face. If you need a seal that squashes a lot, choose a softer profile.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat slot size do I need?\u003c\/strong\u003e\u003cbr\u003eA straight slot about 1.9–2.1mm wide and at least 3mm deep, with at least 2mm of flat frame either side. Check your slot against the drawing before ordering, or send us the dimensions and we will check it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs 80 Shore A soft or hard?\u003c\/strong\u003e\u003cbr\u003eIt is firm, roughly like a shoe heel or a hard rubber wheel. It is the choice when the seal must resist wear, scuffing and tearing, or act as a buffer. The trade-off is recovery: its compression set is 78% after 22 hours at 175°C, so it is best for light or occasional compression rather than a door held hard shut at high heat for long periods. For that, look at a 60 Shore A profile with a lower compression set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it survive heat?\u003c\/strong\u003e\u003cbr\u003eIt is rated from -50°C to +180°C, so it suits ovens, warming cabinets, dryers and machinery that runs hot, as well as cold stores.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it safe near food or drinking water?\u003c\/strong\u003e\u003cbr\u003eYes. The compound is stated to meet FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact, and it is a WRAS approved material. Ask for the certificate if your audit needs it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut square with a sharp knife or shears. Butt the ends together and bond with a silicone adhesive. A firm seal does not like tight bends, so mitre and bond corners rather than bending it round them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich colour should I choose?\u003c\/strong\u003e\u003cbr\u003eAll seven colours are the same compound, profile and price. Black and white are the usual choices for appearance; translucent shows dirt so cleaning is easy to check; red, green, blue and yellow suit colour-coded hygiene zones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I order a shorter length or a different colour mix?\u003c\/strong\u003e\u003cbr\u003eThis listing is a full 25m coil in one colour. For cut lengths, mixed colours or larger quantities, contact us for a quote.\u003c\/p\u003e\n\u003ch3\u003eComplete your project\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-6mm-x-5-2mm-25m-coil\"\u003eSilicone T Seal Profile – 6mm x 5.2mm (40 or 80 Shore A)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-6mm-x-4-5mm-25m-coil\"\u003eSilicone T Seal Profile – 6mm x 4.5mm (lower profile)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-6mm-x-6mm-25m-coil\"\u003eSilicone T Seal Profile – 6mm x 6mm (taller)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-6mm-x-6-5mm-25m-coil\"\u003eSilicone T Seal Profile – 6mm x 6.5mm (softer 60 Shore A, deep leg)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure this profile matches your slot? Send us a photo or the slot dimensions and we will check it. \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Black","offer_id":56590208401787,"sku":"IP-SITS-6.1X5-25M-BLK","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":56590208434555,"sku":"IP-SITS-6.1X5-25M-WHT","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Translucent","offer_id":56590208467323,"sku":"IP-SITS-6.1X5-25M-TRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":56590208500091,"sku":"IP-SITS-6.1X5-25M-RED","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":56590208532859,"sku":"IP-SITS-6.1X5-25M-GRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":56590208565627,"sku":"IP-SITS-6.1X5-25M-BLU","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":56590208598395,"sku":"IP-SITS-6.1X5-25M-YEL","price":675.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-6-1x5mm-black.png?v=1795040971","url":"https:\/\/industrial-polymers.co.uk\/products\/silicone-t-seal-profile-6-1mm-x-5mm-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}