{"product_id":"silicone-t-seal-profile-6-4mm-x-6-6mm-25m-coil","title":"Silicone T Seal Profile – 6.4mm x 6.6mm – 25m Coil","description":"\u003cp\u003eA solid silicone T seal with a flat 6.4mm-wide flange, a rounded crown along the middle of the top, and a plain 3.2mm leg. It stands 6.6mm tall overall. Push the leg into a slot about 3.2mm wide; the flange sits on the frame and covers both slot edges, and the crown stands up as the first point of contact for a closing door, lid or panel. The compound is a medium 60 Shore A silicone, rated -50°C to +180°C. Seven colours, all at the same price, and each coil is one unbroken 25m length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e£675.00 inc VAT per 25m coil, which is £27.00 per metre.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlange 6.4mm wide and 2.0mm thick, with a domed crown rising 1.0mm above it (about 3.0mm wide at its base)\u003c\/li\u003e\n\u003cli\u003eSolid leg 3.2mm wide and 3.6mm long: a push fit in a straight slot about 3.0–3.2mm wide and at least 3.6mm deep\u003c\/li\u003e\n\u003cli\u003e6.6mm overall height; the top of the crown stands 3.0mm proud of the frame before compression\u003c\/li\u003e\n\u003cli\u003e1.6mm shoulder each side of the leg, so the flange covers both slot edges\u003c\/li\u003e\n\u003cli\u003eSilicone rubber, 60 Shore A: 550% elongation, 59% rebound, 31% compression set after 22 h at 175°C\u003c\/li\u003e\n\u003cli\u003eThe manufacturer states the compound meets FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact, and it is a WRAS approved material\u003c\/li\u003e\n\u003cli\u003eBlack, white, translucent, red, green, blue or yellow, all at the same price, held in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLids, hoppers and inspection hatches on food processing, packaging and brewing equipment\u003c\/li\u003e\n\u003cli\u003eOven, prover and warming cabinet doors, where the crown takes up a door that does not close square\u003c\/li\u003e\n\u003cli\u003eMachine guards, electrical and control cabinets with a 3.2mm seal slot\u003c\/li\u003e\n\u003cli\u003eHVAC access panels, duct inspection doors, furnace and heated enclosure doors\u003c\/li\u003e\n\u003cli\u003eHatches, windows and structural joints on marine, construction and vehicle bodywork\u003c\/li\u003e\n\u003cli\u003eColour-coded seals for hygiene zones (red, green, blue, yellow)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-6-4x6-6mm-technical-drawing.png?v=1795042812\" alt=\"Technical drawing of silicone T seal 6.4mm x 6.6mm cross-section: 6.4mm flange 2.0mm thick, domed crown 1.0mm high, 3.2mm leg 3.6mm long, 6.6mm overall, dimensions in mm\" width=\"1000\" height=\"1220\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFull specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eTest method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile type\u003c\/td\u003e\n\u003ctd\u003eSolid T section: flat flange with a domed central crown, straight centred leg\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall width (flange)\u003c\/td\u003e\n\u003ctd\u003e6.4 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e6.6 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlange thickness\u003c\/td\u003e\n\u003ctd\u003e2.0 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg (base) width\u003c\/td\u003e\n\u003ctd\u003e3.2 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg length below flange\u003c\/td\u003e\n\u003ctd\u003e3.6 mm\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrown height above flange\u003c\/td\u003e\n\u003ctd\u003e1.0 mm (reference, 6.6 − 2.0 − 3.6)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrown width at base\u003c\/td\u003e\n\u003ctd\u003eAbout 3.0 mm (reference, scaled from the manufacturer's drawing)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight standing proud of the frame\u003c\/td\u003e\n\u003ctd\u003e3.0 mm (reference, flange + crown)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulder each side\u003c\/td\u003e\n\u003ctd\u003e1.6 mm (reference, leg centred)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuits slot\u003c\/td\u003e\n\u003ctd\u003eApprox. 3.0–3.2 mm wide, at least 3.6 mm deep (our guidance)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional tolerance\u003c\/td\u003e\n\u003ctd\u003eClass E2\u003c\/td\u003e\n\u003ctd\u003eISO 3302-1:2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength per coil\u003c\/td\u003e\n\u003ctd\u003e25 m, one continuous length\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eMaterial and physical properties\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompound\u003c\/td\u003e\n\u003ctd\u003eSolid silicone rubber\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e60 Shore A\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 48-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.15 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eDIN EN ISO 1183-1, method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e11 N\/mm² (11 MPa)\u003c\/td\u003e\n\u003ctd\u003eISO 37, type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e550 %\u003c\/td\u003e\n\u003ctd\u003eISO 37, type 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear strength\u003c\/td\u003e\n\u003ctd\u003e26 N\/mm (26 kN\/m)\u003c\/td\u003e\n\u003ctd\u003eASTM D624, die B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression set\u003c\/td\u003e\n\u003ctd\u003e31 % after 22 h at 175 °C\u003c\/td\u003e\n\u003ctd\u003eDIN ISO 815-1, type B, method A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRebound resilience\u003c\/td\u003e\n\u003ctd\u003e59 %\u003c\/td\u003e\n\u003ctd\u003eISO 4662\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eService conditions\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e-50 °C to +180 °C\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental resistance\u003c\/td\u003e\n\u003ctd\u003eOzone, UV, oxidation, weathering, corona discharge, cosmic and ionising radiation\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"3\"\u003e\u003cstrong\u003eSupply\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlack, white, translucent, red, green, blue, yellow\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. weight\u003c\/td\u003e\n\u003ctd\u003eAbout 30 g per metre, about 0.76 kg per coil (calculated from section and density)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit of sale\u003c\/td\u003e\n\u003ctd\u003e1 coil of 25 m (£27.00 per metre inc VAT)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterials and compliance\u003c\/h3\u003e\n\u003cp\u003eThese are the claims the manufacturer makes in writing for this exact profile and compound. Ask us if your file needs the certificate or declaration.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eClaim\u003c\/th\u003e\n\u003cth\u003eWhat it means for you\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFDA 21 CFR 177.2600\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the US rule for rubber articles in repeated contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEC 1935\/2004\u003c\/td\u003e\n\u003ctd\u003eThe compound meets the EU framework regulation for materials that come into contact with food.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWRAS approved material\u003c\/td\u003e\n\u003ctd\u003eThe material is accepted for contact with drinking water in UK water fittings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree from TSE\/BSE by-products\u003c\/td\u003e\n\u003ctd\u003eNo animal-derived ingredients that carry TSE\/BSE risk.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhthalate free\u003c\/td\u003e\n\u003ctd\u003eMade without phthalate plasticisers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe approvals cover the material as supplied. Whether your finished assembly complies also depends on its design, its cleaning regime and the other materials in it, so check it against your own requirements.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my slot?\u003c\/h3\u003e\n\u003cp\u003eMeasure the slot's width and depth. The leg is a plain 3.2mm, so it pushes in snugly in a slot of 3.0–3.2mm. A slightly wider slot works if you run a bead of silicone adhesive along it first. The slot should be at least 3.6mm deep so the flange sits down flat on the frame; a deeper slot is fine. The flange then covers 1.6mm of frame each side of the slot.\u003c\/p\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAdd up the length of every slot and allow about 5% for trimming and joints. For example, a 600mm × 400mm door needs 2.0m, or about 2.1m with the allowance, so one 25m coil seals 11 doors of that size.\u003c\/p\u003e\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClear any old seal, grease and grit out of the slot, and let it dry\u003c\/li\u003e\n\u003cli\u003eMark the length on the seal with a non-permanent pen before you cut\u003c\/li\u003e\n\u003cli\u003eStart partway along a straight side, not at a corner, and press the leg in with your thumb or a small plastic roller\u003c\/li\u003e\n\u003cli\u003eLay the seal into corners rather than pulling it round them. Stretched silicone shrinks back and opens a gap.\u003c\/li\u003e\n\u003cli\u003eSmooth the flange flat on both sides of the slot so it bears evenly along its length\u003c\/li\u003e\n\u003cli\u003eCut the end slightly long with a sharp knife and push the ends together; a dab of silicone adhesive keeps the joint closed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ: frequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat slot does it fit?\u003c\/strong\u003e\u003cbr\u003eA straight-sided slot about 3.0–3.2mm wide and at least 3.6mm deep. The 3.2mm leg is a snug push fit in that range, and the 6.4mm flange overlaps the slot by 1.6mm each side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich way up does it go?\u003c\/strong\u003e\u003cbr\u003eThe plain 3.2mm leg goes into the slot. The flange sits on the frame with the domed crown facing the door, lid or panel it seals against.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the domed crown do?\u003c\/strong\u003e\u003cbr\u003eThe crown touches the closing panel first, along a narrow line, so the seal makes contact even if the door sits slightly out of square. As the door closes further the crown squashes down and the contact band widens towards the flange.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hard is it?\u003c\/strong\u003e\u003cbr\u003e60 Shore A, a medium silicone. It is soft enough to seal with normal closing force and firm enough to hold its shape in the slot. Its 59% rebound means it springs back each time the door opens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used near ovens and heaters?\u003c\/strong\u003e\u003cbr\u003eIt is rated to +180°C. That suits oven, prover and warming-cabinet doors, drying equipment and heater housings, as long as the seal itself stays at or below that temperature. It stays flexible down to -50°C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it safe near food or drinking water?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states the compound meets FDA 21 CFR 177.2600 and EC 1935\/2004 for food contact, and it is a WRAS approved material. We can send the declaration if your audit needs it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stay in the slot without glue?\u003c\/strong\u003e\u003cbr\u003eIn a 3.0–3.2mm slot the leg grips by friction, which is enough for most lids and doors. On a sliding door, a vibrating machine or a slot that is a little oversize, run a thin bead of silicone adhesive in the slot first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate are the dimensions?\u003c\/strong\u003e\u003cbr\u003eThe profile is extruded to ISO 3302-1 class E2, the normal tolerance class for extruded rubber sections. Check your slot against the drawing before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it flatten over time?\u003c\/strong\u003e\u003cbr\u003eIt has a compression set of 31% after 22 hours at 175°C. That is a hot, demanding test; at normal room or warm service temperatures the seal keeps springing back for a long time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut and join it?\u003c\/strong\u003e\u003cbr\u003eCut it with a sharp knife or heavy shears. To join it, use a silicone adhesive or silicone sealant; most general-purpose glues and contact adhesives will not bond to silicone rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs every colour the same price?\u003c\/strong\u003e\u003cbr\u003eYes. All seven colours cost £675.00 per 25m coil inc VAT (£27.00 per metre).\u003c\/p\u003e\n\u003ch3\u003eComplete your project\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-6-1mm-x-6-5mm-25m-coil\"\u003eSilicone T Seal Profile – 6.1mm x 6.5mm (deep flat head, 3.6mm leg, soft 40 Shore A)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-5mm-x-8-5mm-25m-coil\"\u003eSilicone T Seal Profile – 5mm x 8.5mm (same 3.2mm leg, narrower head, 50 Shore A)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/silicone-t-seal-profile-5-8mm-x-7-5mm-25m-coil\"\u003eSilicone T Seal Profile – 5.8mm x 7.5mm (domed head, ribbed leg)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure it will fit? Send us a photo, or the width and depth of the slot, and we will check it for you. \u003ca href=\"\/pages\/contact\"\u003eContact our team\u003c\/a\u003e.\u003c\/p\u003e","brand":"Industrial Polymers","offers":[{"title":"Black","offer_id":56590217118075,"sku":"IP-SITS-6.4X6.6-25M-BLK","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":56590217150843,"sku":"IP-SITS-6.4X6.6-25M-WHT","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Translucent","offer_id":56590217183611,"sku":"IP-SITS-6.4X6.6-25M-TRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":56590217216379,"sku":"IP-SITS-6.4X6.6-25M-RED","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":56590217249147,"sku":"IP-SITS-6.4X6.6-25M-GRN","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":56590217281915,"sku":"IP-SITS-6.4X6.6-25M-BLU","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":56590217314683,"sku":"IP-SITS-6.4X6.6-25M-YEL","price":675.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/7776\/6024\/files\/silicone-t-seal-6-4x6-6mm-technical-drawing.png?v=1795042812","url":"https:\/\/industrial-polymers.co.uk\/products\/silicone-t-seal-profile-6-4mm-x-6-6mm-25m-coil","provider":"Industrial-polymers ","version":"1.0","type":"link"}